can't rotate pictures in the windows fax and picture viewer

Similar Questions

• How to open .tif files using the Windows fax and picture viewer

  I have the file open options set to use the viewer photo and fax Windows, however, it is always opens the .tif file in a window of IE. In reading the other posts regarding this problem, I think it may be a number of MIME, but nobody published how to fix this. Can someone send please how to change the MIME type so I can open the files in the right way. I REALLY appreciate it.

  Windows XP SP3 with all updates and IE8.
  Thanks in advance,
  Eric
   
  Original title: how IE8 to open a .tif file by using the Windows fax and picture viewer?

  Hello

  I suggest that allows you to remove any CLSIDS listed under location:

  HKEY_CLASSES_ROOT Type\image/tiff
  
   

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows.

  I hope this helps.

• How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  You don't, so use the scanning software provided by your device manufacturer, assuming that you have installed the unknown device with their installation cd or the download direct the full version of this site to the

• Uninstall the windows fax and scan

  I was playing around with the scanning and fax for windows... I don't have a landline in this House... now, I can't find how to uninstall windows fax and scan... the constant noise, 'status of fax and scan audit' is a pain.  How can I remove this work programme... Only, I use a cell phone and have a wireless (Wild Blue) connected to this computer system.

  Go to the control panel and select programs and features.

  On the left side, select Enable Windows features turn on or off

  Scroll down to printing and Document services.

  Select the sign more to develop.

  Remove the control from Windows FAX and Scan.

  Click OK.

  That should do it.

• whenever I try to use the windows fax and scan, I have this message:

  whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?

  Hi Mohamed

  Thanks for your posting in the Microsoft community

  You can check if you have my documents in C:\Users\ (username) \My documents correct location.
  If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.

  You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.

  See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  OR

  Just find a hidden file called 'fax' at c:\users\rich\Documents\. I have
  delete the file and create a directory named "Fax" to
  c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
  "Personal cover pages. You click Windows Fax and Scan

  It will work

• What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  Original title: Windows Fax and Scan

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  A piece of hardware called a Fax Modem, installed in or connected to your computer with the appropriate device drivers from the manufacturer of the device, you have installed in or connected to your computer.    And a telephone line.

• remove 1 fax number from outlook to use the Windows fax and scan

  I recently bought a new computer with Windows 7 operating system.  I try to use Windows Fax and Scan to send a fax using my Outlook address book fax numbers.  When I enter the phone number in Outlook it shows as (281) 555-1212.  However, it converts the number of + 1 for each entry, regardless of how I implemented the rules of numbering or not.  Then when I try to fax, I don't need + 1 to dial numbers, only the area code and the number.  I can't do the 1 = go away.  If I dial the number directly in the Fax Wizard, and then it composes correctly, but when pulling starting from Outlook address book that's messed up.

  Basically, I don't have the + 1 to dial local numbers.  Only the 10 digits.  When I get a fax in Outlook number, it automatically formats it with the front 1.  I found an article online that said that if I put a comma before the number to 10 digits, it forces the computer to dial only the numbers that I entered.  It works fine when I do that, then my problem is solved.  Thanks for responding.

• Double click on the photo (my photo) causes PC freeze with message "not responding" (scheduled for the windows fax and picture viewer)

  WINDOWS XP

  "This program is not responding...". »

  I then have to click on the right upper window X two times to close the window. When it closes Finally, everything on the desktop disappears for about 3 seconds then reappears as if the PC restarted, but it does not actually restart.

  My images, the other day, all open without this feeze/final issue. I don't have these problems when you use Windows XP Paint, Jasc Paint Shop, or Quicktime to open images, once set by default... Just does not work with Windows Picture and Fax Viewer more and all my photos are already defined (default) to open with Windows Picture and Fax Viewer - clicking Properties confirms this.

  Also, if I right click on the individual image to 'open with' and manually choose 'open with' Windows Picture and Fax Viewer, it will then open and I can scroll all the following pictures an image in Windows Picture and Fax Viewer. "But I can't just click on an individual picture, otherwise, it will freeze just straight up.  Difficulty It Center Microsoft could not automatically repair because the shimgvw.dll file already exists.

  I used to always use Windows Picture and Fax Viewer with no such problems. I have not the slightest idea what happened... even though I was messing around with 1) Component Services > Security Com > permissions & launch Activate and Run permissions) 2 > Regedit > Edit > "Permissions" last week and changed "Registered Owner" in HKEY LOCAL MACHINE and some other stuff like that. Could permissions and changing names have caused this unexpected problem in Windows Picture and Fax Viewer? If so, the changes I made will not be changed back, then how can I fix a broken Windows Picture and Fax Viewer?  And if these changes, last week, have nothing to do with this "opening images in the image Windows and Fax Viewer problem,' so what?

  I did your suggestion before posting here. I saw the same solution as your addition, the interpreter, but it does not solve the problem because I already had the shimgvw.dll etc. in their proper place and my photos/images were not always open with Windows Picture and Fax Viewer the way I wanted them to open.

  Since I got my photos all open as I wanted (as before) this way to use Windows Picture and Fax viewer:

  Control Panel > Folder Options > File Types: I changed then each file/folder associated with 'images' to open with Windows Picture and Fax Viewer. I determined this by reading the details for each extension / the item highlighted. If the referenced details 'images', I then clicked on change and choose Windows Picture and Fax Viewer to open the extension.

  I went through everything everyone who was not obvious that they are. I made a change: BMP, GIF, EMF, JFIF, JPE, JPEG, etc... I changed at least 12 (more than I thought it was).

  Immediately after changing all of these types of files, I rebooted and Windows Picture and Fax Viewer was still working the way I wanted to (as before).

• my windows vista OS does not have the windows fax and scan program

  It does not seem that I have the fax of the window and he analyzes the program on my OS (Vista);

  Hello

  Vista home versions have included fax software

  for this you need business or ultimate or business

  you need 3rd party fax software if you have Vista Edition Home Basic or home premium

  try to snappy fax:

  http://www.SnapFiles.com/get/snappyfax.html

• Windows fax and scan only saves the first page

  When I use the windows fax and scan pages to analyze. You can get an overview of all the multiple pages scanned, but what emailing or save you then cannot see the first page.

  Hello

  If you're using a scanner with a charger of documents and Windows Fax and Scan, you can scan multiple pages into a single file of scanning to the TIFF (.tif) file format. For more information, see:

  
  Scan a document or photo with Windows Fax and Scan
  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan 

  If you use Windows Fax and Scan and a flat bed scanner, you can scan multiple images to separate files probably. Not all scanners flat have this ability, so you may need to contact the manufacturer of the scanner to get a driver so that your scanner flat may offer this option.

  Reference:

  Scanning: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions 

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Help with registration of the PDF when using Windows Fax and Scan

  When I use the Windows Fax and Scan, I'm trying to scan a document and then save it as a PDF file.  What happens is when I save it, it opens Adope Photo Shop and will not let me save it as a PDF.  How can I scan a document and then save it as a PDF in Windows 7.0?

  If you have Word 2007 or later, you can scan it, then save it as a PDF. Works fine for me. I have a Canon LIDE 100 scanner, I bought for $50, which will also scan directly to PDF.

  I hope this helps. Good luck.

• When usng Windows Fax and Scan, how can I scan a document of several pages to a single file or folder?

  I'm trying to analyze a statement of income, and when I scan a page, I don't seem to be able to the scanner in a single folder. Each page shows up as a separate item?

  I tried to download the HP software but it was rejected because the Windows Fax and Scan was already installed on my new PC.

  This seems rather odd.  Can you give us the complete error message without paraphrase?

  You should not delete Windows Fax and Scan in order to install the manufacturer's software.

  What version of Windows is installed?  32-bit or 64-bit?

  Assuming you have Windows 7, is it upgraded to Vista or come pre-installed with Windows 7 computer?

  Although I have not used, HP provides a 'printer Install Wizard"for Windows 7 and 8 which is supposed to help you obtain and install the appropriate--> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-115766-2&cc=us&dlc=en&lc=en&os=4063&product=1146331&sw_lang= driver

• Scanning documents w / Windows Fax and Scan

  I use an HP all-in-one to scan documents.  Unfortunately, "sweeping" HP solutions Center function of gel (I can print but not scan), then I use the Windows Fax and Scan with Windows 7 Ultimate.  How to scan multiple pages in a Document/picture using Windows Fax and Scan?

  Hi jwoodyiu,

  If you're using a scanner with a charger of documents and Windows Fax and Scan, you can scan multiple pages into a single file of scanning to the TIFF (.tif) file format. For more information, see:

  Scan a document or photo with Windows Fax and Scan

  http://Windows.Microsoft.com/en-us/Windows7/scan-a-document-or-photo-with-Windows-fax-and-scan

  If you use Windows Fax and Scan and a flat bed scanner, you can scan multiple images to separate files probably. Not all scanners flat have this ability, so you may need to contact the manufacturer of the scanner to get a driver so that your scanner flat may offer this option.

  Reference:

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions

  On the issue of scanner HP, download the latest drivers and software available for the model number that is compatible with Windows 7. That should solve the problem.

  http://welcome.HP.com/country/us/en/support.html

  You can provide your suggestion to https://connect.microsoft.com/dashboard/info/

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

  I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

  Hello

  Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

  Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

  http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

  Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

  http://h10032.www1.HP.com/CTG/manual/c02668142

  To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

  Kind regards

  Shlomi

• How to set up Windows Fax and Scan with Brother MFC-7440N printer/all-in-one

  Hello, I'm trying to set up Windows Fax and scan using my all-in-one Brother MFC-7440N printer/fax/scanner.

  When I go into the Windows Fax and Scan menu, I'm going to Fax > tools > accounts Fax. Then I select 'Add '. When he asks, I then select "Connect to a fax on my network server." But I don't know the name of my printer/fax/scanner when he asks "Type the fax server location."
  How to find the name?
  Help, please! Thank you!

  Hello

  You can include the MFC-7440 printer named fax in the \\IP addressname of \\Printer' and check.