Microsoft LifeCam Show color issue

Similar Questions

• Microsoft Lifecam VX-2000 shows black video when the software is installed

  Original title: Microsoft Lifecam VX-2000

  I just bought and followed the installation instructions to install and operate the lifecam vx-2000.

  I tried first to find this product on the support webpage itself, but it has not been listed with the other lifecams. I have no idea why, because he is supposed to be a site of support for their products...

  My computer meets the requirements for the software.

  However, after the installation, I opened the microsoft lifecam software, the program screen is black.

  There is no error message. Just a black screen.

  I uninstalled the program and tried to connect the webcam without software and when I opened it upward through Skype video settings to see if she would recognize the camera - he did.

  So I'm a bit puzzled as to why the software will not work with the camera.

  Thus, once the software is loaded on the computer, the video from the camera stops working, until the program is removed once more my computer.

  A little disappointed and do not know how to solve this problem.

  Any suggestions or methods to solve this problem will be appreciated.

  Hello, Annick,.

  You mentioned first validation that you were unable to find the XP driver, is this always the case?

  Win XP driver is available here: http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=YFC-00001&os=XPSP2x64&lang=en

  Follow the same instructions above.

  Before installing LifeCam driver make sure that you have at least Windows XP Service Pack 2. You can download service packs using these links:

  Service pack 2: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=049c9dbe-3b8e-4f30-8245-9e368d3cdb5a

  Service pack 3: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5b33b5a8-5e76-401f-be08-1e1555d4f3d4&displaylang=en

  Activate the automatic update in the control panel: the parameters of control of configuration\systeme and Maintenance\Windows Update\Change

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• Problem with the microsoft lifecam vx2000 and Yahoo chat display white screen and not my photo

  Hi, I use microsoft lifecam vx2000 for my cat to yahoo, it was working fine for a while.

  Since a few days there send me a problem. It shows a white screen instead of my image...
  Help, please

  Hello

  · Is the issue only when you are working on yahoo messenger?

  · Do you remember any changes made on the computer before the show?

  I suggest you try the steps listed in the link below: don't troubleshoot bad or no video or problems to start the LifeCam software: http://support.microsoft.com/kb/933310

  See also: using LifeCam with AOL, Yahoo, or Gmail: http://support.microsoft.com/kb/969275

• Microsoft lifecam hd-5000 problem Installtion

  My system is Windows xp home edition. I have uppluged and reconnected to my usb port several times, tried different 2.0 ports, connected my old webcam and recognized computer, restarted my computer several times and reinstalled at least four times. I have two original disk Microsoft hd-5000 3.0 installation and I tried both, I do not see the web cam in Device Manager. I don't understand why my computer recognizes my five or six web cam when you plug it in but nothing when I plug the Microsoft hd-5000.

  Hello

  1. you get any error message?

  2. the Microsoft lifecam works any other computer?

  3. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft Fixit from the link below.

  http://support.Microsoft.com/mats/hardware_device_problems/

   

  Method 2:

  Follow the steps from the link below.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/929087

• After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  Prasanna Kumar Mishra

  Hi Prasanna Kumar Mishra,

  You did it happen any changes made to the computer before the show?

  You can try the steps from the following links and see if that helps:

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  The problems of compatibility between LifeCam and other programs
  http://support.Microsoft.com/kb/953692

• Blue screen on my computer after I installed Microsoft LifeCam VX - 700 Webcam

  Original title: Microsoft LifeCam VX - 700 Webcam

  I installed the unit according to the Instructions, now I get blue screens & Shut Downs. I am running Windows XP Pro. With all the updates so far.

  Hi tailgatter,

  -What is the error code that you receive with the blue screen?

  Look in the event viewer to check if there is no error message related this topic.

  Check out these links for more information:

  Using the event viewer

  Procedure to view and manage event logs in Event Viewer in Windows XP

  Keep me updated on the status of the issue.

• Microsoft Lifecam Cinema works well with windows live messenger.

  I just bought a Microsoft Lifecam Cinema, connected with my PC and installed the software 3.6. What I noticed that the quality fo the vedio going well under the lifecam software or to preview audio/vedio setting of the windows live messenger. However, the vedio quality is pretty poor, when I compose a vedio with other people using windows live messenger.

  I don't know if this is related to the operating systems or not. My operating system is XP Professional, the other part is windows 7. the version of my windows live messenger is current.

  Any advice?

  Hi IanZ11,
   
  The LifeCam software requires a card video and monitor that can run a resolution of at least 800 x 600 high color. Set the resolution of Windows display on 800 x 600 high color and then test the software.
   

  Try the steps listed in the article below and check if that helps you.

  Don't troubleshoot bad or no video or problems to start the LifeCam software     

• Microsoft LifeCam suddenly stopped working, has error Code 43

  I have been using an external camera from Microsoft "Microsoft LifeCam" on my Toshiba 305 and suddenly it has stopped working & and/or is therefore most recognizable when it is plugged.  Any suggestions on how to put it on again.  The camera that came with this Toshiba 305 is very grainy and looks like maybe the goal was scratched and does not have a good video image and the external camera did a great job for me with this laptop.

  One of the "warnings" or troubleshooting of the menus said the following:

  Intel (R) 82801 G (ICH7 Family) USB2 Enhanced Host Controller

  Windows has stopped this device because of problems (Code 43)

  Help!  and thank you Bill in Chicago!

  Hello Bill,

  Thanks for posting your question on the Microsoft Community forum.

  I apologize for the inconvenience caused to you.

  I understand that you have a problem with Microsoft life camera stopped working in the system and get the error 43.

  This issue would have occurred because drivers have been corrupted in the system.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Error codes in Windows, Device Manager please follow the steps in the link provided and check if it helps.

  http://support.Microsoft.com/kb/310123

  If the problem persists, please follow method 2.

  Method 2:

  Code 43: Windows has stopped this device because it has reported problems, please follow the steps in the link provided below.

  http://TechNet.Microsoft.com/en-us/library/cc725873 (v = WS.10) .aspx

  If the problem persists, follow method 3.

  Method 3:

  Troubleshooting for the failures to find the new LifeCam hardware, please follow the steps in the link provided below and check if it helps.

  http://support.Microsoft.com/kb/929087

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  For reference:

  Please refer to the procedure described in the article below.

  Troubleshooting: Webcams

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

  Thank you.

• Microsoft LifeCam VX-6000 "initialization error".

  I'm running the 64-bit version of Windows & RC and I can't get my Microsoft LifeCam VX-6000 to work.  The installation disc returns an error on known incompatibility issues and does not load software or drivers.  Windows 7 find a driver online and installed it and now the camera software loads, but gives the "initialization error" message and a link the LifeCam help files.  There is no support for "initialization error".

  Go to http://www.microsoft.com/hardware/windows7/support.mspx and download the software of your camera that is designed for Windows 7 Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• Microsoft Lifecam vx 3000 - recipient not able to hear the sound

  I installed the LifeCam as stated but my recipient can't hear me.  We see each and I hear them, but they don't hear me.  Could someone please help.  I'm not really savvy in computer science, but I try.  Thank you.

  Hello

  I understand that you are facing problems with Microsoft Lifecam vx 3000.

  1. what program you use to video chat?
  2 have you tried to use this webcam with other programs?
  3. do you get an error message?

  I suggest to see the next procedure and check if it helps.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  
  Exercise the functions mentioned below to adjust the Microphone as default:

  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. Select the Microphone, and then click "Set as default".

  Note: Also in the playback check if the speaker is set as default. Method 3:

  Method 3:

  I suggest you to install the latest drivers for webcam If the problem persists.

  You can follow the link given below to download the driver for Windows 7

  http://www.Microsoft.com/hardware/en-in/d/LifeCam-VX-3000

  Reference:

  LifeCam problems

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope this solves the problem. If this problem persists, then please get back to us with the results of these methods and any additional information. We will be happy to help you.

• Microsoft LifeCam vx-3000 for Windows 8?

  Can we expect Microsoft to publish an updated driver for Lifecam vx-3000 camera that is compatible with windows 8?  I'm willing to be patient if I know they are doing this.  The reason why I even bought Microsoft hardware is first and foremost because I expected Microsoft to keeping relatively up-to-date on their drivers for operating systems that they deliver.  If anyone has information (or if) a windows 8 driver will be issued which would be very useful.  Thank you.

  Try this driver it worked for me applies to: NX-6000, VX-1000, VX-2000, VX-3000, VX-5000, VX-5500, VX-6000, VX-7000.

  1. go in Control Panel

  2. go in programs

  3 uninstall Microsoft LifeCam

  4 restart the pc

  5. install this driver Softpedia Secure download (US)

  6. http://download2us.softpedia.com/dl/ed596af6444cbb8ad0b44556410f7fae/53b6e76f/300082475/drivers/webcam/LifeCam3.0.exe

  7 look how answer you the questions in order to avoid the additional toolbars and other software

  8 assistant will say all functions may not work correctly you wish to install click Yes that all features for me.i am Vibrio 8.1 64-bit windows and my LifeCam vx 3000 works. I hope this helps.

• We get an error "Device driver software has not been installed successfully" when installing Microsoft LifeCam HD-3000

  * Original title: does not always

  There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?

  Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.

  Hi Rachel,

  Thank you for your response.

  I suggest you to contact the Microsoft Hardware support for assistance on this issue.

  http://www.Microsoft.com/hardware/en-CA/support/contact-us

  It will be useful.

• difference between microsoft lifecam studio model # Q2F-00013 and model #Q2F-00001

  What is the difference between microsoft life cam model studio # Q2F-00013 and model # Q2F-00001

  Hello, Paul.

  See details on the two

  Q2F-00001

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio/Q2F-00001#details

  Q2F-00013

  http://www.Amazon.com/Microsoft-LifeCam-Studio-webcam-Q2F-00013/DP/tech-data/B0096KSBB0/ref=de_a_smtd/176-9485188-1536144

• Microsoft Lifecam 6000 information material

  Hello

  I need to know the size of the sensor of the Microsoft Lifecam 6000 and its focal length. I can't find it in the data sheet.
  Quatrevaux

  Hello

  I suggest you contact the Microsoft hardware support team for assistance.

  http://www.Microsoft.com/hardware/en-us/support

  See also the below mentioned link

  Data sheet (PDF)

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-6000-for-notebooks#support

  I hope this helps.

• Why do I have a loud hum when with audio recorded when I read a file saved with Microsoft LifeCam with the latest version of Microsoft Essentials?

  Why do I have a loud hum as well as audio recorded when I play a file saved using Microsoft LifeCam with the latest version of Microsoft Essentials?

  HUMS are usually ground fault loops.

  If it is a test of laptop with and without the power connected (using battery instead)

  The mic can also have a cut wire, etc.