Microsoft LifeCam VX-2000

Similar Questions

• Microsoft Lifecam VX-2000 shows black video when the software is installed

  Original title: Microsoft Lifecam VX-2000

  I just bought and followed the installation instructions to install and operate the lifecam vx-2000.

  I tried first to find this product on the support webpage itself, but it has not been listed with the other lifecams. I have no idea why, because he is supposed to be a site of support for their products...

  My computer meets the requirements for the software.

  However, after the installation, I opened the microsoft lifecam software, the program screen is black.

  There is no error message. Just a black screen.

  I uninstalled the program and tried to connect the webcam without software and when I opened it upward through Skype video settings to see if she would recognize the camera - he did.

  So I'm a bit puzzled as to why the software will not work with the camera.

  Thus, once the software is loaded on the computer, the video from the camera stops working, until the program is removed once more my computer.

  A little disappointed and do not know how to solve this problem.

  Any suggestions or methods to solve this problem will be appreciated.

  Hello, Annick,.

  You mentioned first validation that you were unable to find the XP driver, is this always the case?

  Win XP driver is available here: http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=YFC-00001&os=XPSP2x64&lang=en

  Follow the same instructions above.

  Before installing LifeCam driver make sure that you have at least Windows XP Service Pack 2. You can download service packs using these links:

  Service pack 2: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=049c9dbe-3b8e-4f30-8245-9e368d3cdb5a

  Service pack 3: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5b33b5a8-5e76-401f-be08-1e1555d4f3d4&displaylang=en

  Activate the automatic update in the control panel: the parameters of control of configuration\systeme and Maintenance\Windows Update\Change

  Kind regards

  Helene

  Is this useful? Then please click the button to Vote as helpful . Is that an answer? Then click Mark/propose as answer

• Microsoft Lifecam VX-2000, a beep sound during playback

  My lifecam VX-2000 will beep continuously during playback.  It works perfectly on my netbook, but not on one of two desktop computers I've tried it on.  the resolution of the image being recorded apply the beep tone, which can be a clue.  I've updated the drivers of the device, as well as those of my graphics card.  Here is my system info:

  Thanks for any assistance, you may be able to provide.

  Hello

  Thank you for your response.

  I suggest you run the Audio troubleshooter to check and see if the problem still occurs. Follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter

  Also, follow the steps described in the following links:

  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  For your reference, you can use the preferred search engine to download sound recorder to record a song.

  NOTE: THIRD PARTY SOFTWARE WARNING

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know the status of the issue.

• Error installing LifeCam VX-2000. Help?

  Installed Microsoft LifeCam VX-2000 on my computer emachines laptop and it worked fine the first night, he has used to perhaps five minutes and that's it. Home from work and he has been absent from my Start menu/desktop. Okay, so I installed it again.

  He has not worked since.
  I can't find any virus.
  I used the software to remove the lifecam completely and all of the remaining files before restarting my computer and software to try again, but with no luck.

  I get this error:
  "LifeCam.exe has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »
  
  Sometimes followed by this error message:
  "The application could not initialize properly (0xc0000006). Click OK to close the application. »

  It gives me troubleshooting information, but nothing seems to help. I didn't bother with the advanced material because I'm not 100% sure about what I do and don't want anything else.

  Someone, anyone, tell me what I'm doing wrong here?

  Hi KrisHodder,

  First of all I suggest you to install the drivers for the webcam using the DVD provided with the web camera or by visiting the link below.
  Download Webcam & headset software
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=YFC-00001&OS=WVista_3264&lang=en

  You can also visit the following links and try the steps:
  Problems that may occur when you use a LifeCam on a computer that is running some known background programs
  http://support.Microsoft.com/kb/953692

  You receive message error "there is no camera connected" or "Initialization error", and that the video preview is empty when you start the LifeCam software
  http://support.Microsoft.com/kb/933311

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Microsoft LifeCam program gives me a message that: "there are no cammera connected to this computer.

  A few months ago, I unplugged my computer to go to my friends for a LAN party House, when I am back and plugged my LifeCame VX 2000, and started the software called Microsoft LifeCam, it gave me a message telling me that there is no cammera connected to the computer.

  I then went to the Device Manager and it says I have a vega USB 2.0 connected and nothing on a Microsoft LifeCam.

  I also went to check on Skype and he also said I have a vega 2.0 USB connected.

  Another strange thing is that only the microphone of this "vega USB 2.0' works on Skype and not video.

  I have windows 7 ultimate 64-bit, I defenitely have the system requirements, because after all, it's a gaming PC.

  I have the latest drivers for and software as far as I'm concerned, because I checked in the device for Update Manager and he told me that all my drivers are up to date.

  Hello
   
   
   
  Method 1.
  With LifeCam VX 2000 connected in the not working USB Port...

  (a) open the Device Manager and search for imaging devices -> Microsoft LifeCam VX 2000 and Uninstall. (no need to remove the system drivers, can leave installed)

  (b) now search sound, video and game controllers -> Microsoft LifeCam VX 2000 and Uninstall. (also good can leave the drivers in the system, no need to delete)

  (c) now unplug the webcam not workingUSB port, wait a few secconds andplug a job.

  succesfully d) wait a while until it initialized in the system.

  ((e) now doing exactly the same things, as described in stage a) and b).

  (f) now change ports USB again, wait that it is properly installed in the system sayingready to use.

  After this webcam should work and Microsoft LifeCam application should detect it in the first USB port which did not work before, saying"There is no camera connected to this computer".

   
  Now check if the camera initializes and also if she also works in Skype.
   
  Method 2.
  If the problem persists, you can see the methods listed in the section below.
  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software
  http://support.Microsoft.com/kb/933311
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install my software or drivers Lifecam VX-2000.

  LIFECAM VX 2000 WILL NOT DOWNLOAD

  Hello

  I recently bought the lifecam vx-2000.

  have been up all night trying to download the software, but he says he has an "unexpected error" and will not continue to install.

  I followed all possible solutions on the Microsoft Support site, but nothing has worked.

  I also tried to follow the advice on this site to go to the folder "driver 64' in the CDROM, click VX2000." the problem is there is no VX2000, only VX1000, VX3000 & VX6000.                                                                                                                                                Can anyone help as I have now run out of ideas.

  Sincere greetings

  Helen

  Hello

  Follow the link below to fix the problem.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software
  http://support.Microsoft.com/kb/953691

• Problem installing LifeCam VX-2000

  A few months ago, my roommate bought a Webcam LifeCam VX-2000, he used it to Skype and msn, and I wanted to use it as well, so I installed the cd on my laptop and started using it too. now my friend left and he took the webcam as well, and so I went out and bought the same webcam.  and then I tried to install the cd but an error came 'the installation cannot continue because an unexpected error has occurred. http://support.Microsoft.com/kb/953691. So I go to this site and it tells me to uninstall the old version and then reinstall it from current CD. so when I go into Add/Remove programs I find the program I'm trying to uninstall and then another error message appears "windows service install could not be accessed. This can happen if windows install is not properly installed. »

  What the hell to do! I'm stuck!

  P.s. I have Windows Vista and Dell Inspiron 1525

  Hello

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  Start the Windows Installer service

  a. Click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Step 2:

  a. plug in and let the installation process fails.

  b. go to your control panel-> computer-> Device Manager and find the device

  c. right-click on the device and choose Update driver software

  d. When demand choose Browse my computer for driver software.

  e. Locate the CD-ROM drive under \Life Cam\Setup\Files\Driver64\VX2000

  f. click Next and continue through the driver installation process.

  g. once the installation is finished, tried to reinstall the Software Life Cam, check if allows it.

• LifeCam VX-2000 white screen

  Grateful if someone could help. I use Vista Home Premium SP2. I installed a Lifecam VX-2000, and I get a blank screen. I've tried almost all of the advice that I've searched the forums. Thanks in advance.

  Hi SasKum,

  ·         When exactly do you get the blank screen?

  ·         You receive an error message/code?

  ·         Are you the white screen when starting Windows or when you use the lifecam?

  I suggest you follow the provided article and check if it helps.

  http://support.Microsoft.com/kb/933310

  http://support.Microsoft.com/kb/933311

• No video with the Lifecam VX-2000

  Help, please.  I just installed a Lifecam VX-2000 and I can't get the video to work - message "there is no camera connected to this computer" when you open Microsoft Lifecam.  In addition, the Lifecam dashboard is unavailable.  I have searched and tried all other troubleshooting advice without solution.  Help, please.

  Here is the Vista forums!

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• My LifeCam VX-2000 changed its name to Vimicro USB2.0 Pc Camera (Venus)

  Hello

  A few days ago I tried to use a screen recording software, but I noticed that it wasn't showing my Lifecam VX-2000 webcam as a record of entry as usually... I went to check in Device Manager and my webcam has been shown is more like a lifecam, but as a Vimicro USB2.0 Pc Camera (Venus)... I tried to update the drivers and reinstall the lifecam software... but it does not work.

  the device is recognized by the pc, but with the wrong name, and I can't use it as a "microphone" as I did before.

  Please help me

  Marco

  Hello Marco,.

  Thanks for the info and sorry for the late reply.

  However, have you tried method 3 form steps in my previous post?

  If so, please reply with the results.

  See also:

  Update a hardware driver that is not working properly.
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Please respond with the information required to help solve you the problem on that.

  Thank you

• Microsoft LifeCam vx-3000 for Windows 8?

  Can we expect Microsoft to publish an updated driver for Lifecam vx-3000 camera that is compatible with windows 8?  I'm willing to be patient if I know they are doing this.  The reason why I even bought Microsoft hardware is first and foremost because I expected Microsoft to keeping relatively up-to-date on their drivers for operating systems that they deliver.  If anyone has information (or if) a windows 8 driver will be issued which would be very useful.  Thank you.

  Try this driver it worked for me applies to: NX-6000, VX-1000, VX-2000, VX-3000, VX-5000, VX-5500, VX-6000, VX-7000.

  1. go in Control Panel

  2. go in programs

  3 uninstall Microsoft LifeCam

  4 restart the pc

  5. install this driver Softpedia Secure download (US)

  6. http://download2us.softpedia.com/dl/ed596af6444cbb8ad0b44556410f7fae/53b6e76f/300082475/drivers/webcam/LifeCam3.0.exe

  7 look how answer you the questions in order to avoid the additional toolbars and other software

  8 assistant will say all functions may not work correctly you wish to install click Yes that all features for me.i am Vibrio 8.1 64-bit windows and my LifeCam vx 3000 works. I hope this helps.

• Can't get lifecam vx-2000 webcam on 32TL933G at work

  Hello

  I ve bought a 32tl933g two weeks ago and the toshiba places there are stuff that I use every day, like youtube, the web Navig and so on.

  Now, I bought a webcam, the lifecam vx-2000 to use it on Skype, but I can´t install it.
  I ve tried to download the driver and put it on a stick, but it won´t work.

  Can someone help me and tell me how to install it. If it works at all?

  Thank you.

  Hello

  To my knowledge, the TV must be ready to use a Skype webcam.
  And if the TV is ready for Skype, you can use and webcam, but a special!
  You cannot connect any webcam possible.

  So first question: is this Skype ready TV?
  This is not mentioned in the user manual so I guess that it s not.

  Take a look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70203

  For example: the 40RL938 is a Skype-ready TV and FreeTalk HD: TALK-7291 could be used.

• Microsoft wireless desktop 2000 USB transceiver works do not.

  I have Microsoft Wireless Desktop 2000 for a while now, about 2 months.

  Its under warranty. Now, all of a sudden, the radio stopped working.

  I know because if I apply a slight pressure on the transceiver downwards, he begins to respond and when I take off the pressure, it stops responding.

  P.S. I also tried all the troubleshooting methods.

  I tried service and technical support centres. They say that Microsoft does not provide two-way radios separately and I buy the complete kit again.

  Now I can't do it because he is a few months old and I've spent a small fortune buying the kit.

  I hope someone at Microsoft to help me.

  Thank you!

  Hello KartikGudali

  Thank you for reaching out to us in the Community Forums.

  Please note that you are posting in the Forums for Microsoft band.  That your question does not match this product, you need to try a different path.

  You may be able to communicate with your retailer or your store, or continue to work with the support of your product range.

  Best regards

• difference between microsoft lifecam studio model # Q2F-00013 and model #Q2F-00001

  What is the difference between microsoft life cam model studio # Q2F-00013 and model # Q2F-00001

  Hello, Paul.

  See details on the two

  Q2F-00001

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-Studio/Q2F-00001#details

  Q2F-00013

  http://www.Amazon.com/Microsoft-LifeCam-Studio-webcam-Q2F-00013/DP/tech-data/B0096KSBB0/ref=de_a_smtd/176-9485188-1536144

• Microsoft Lifecam 6000 information material

  Hello

  I need to know the size of the sensor of the Microsoft Lifecam 6000 and its focal length. I can't find it in the data sheet.
  Quatrevaux

  Hello

  I suggest you contact the Microsoft hardware support team for assistance.

  http://www.Microsoft.com/hardware/en-us/support

  See also the below mentioned link

  Data sheet (PDF)

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-HD-6000-for-notebooks#support

  I hope this helps.