Migration of es300 to device of esVMWARE

Similar Questions

• OpenWapp migration to a new device?

  Is it possible to go from the OpenWapp with all contacts and messages from my my flame Keon?

  I learned by watching his source code, OpenWapp seems to use IndexedDB for storage of conversations.

  Using backup_restore_profile.sh, I finally found a way, and I wrote a little HOWTO.

  Migration of the Keon (1.3) to a flame (2.0) seems to work. I write "seems" because I see the messages migrated fine, but I can't connect to WhatsApp for now: OpenWapp registration process has been broken for a few days. Perhaps WhatsApp changed its API.

  Note that simply return the Keon on the flame settings did not work and in fact crashed the device (restart required).

• Migration of VCS (VM device)

  Hello

  Is there an easy way to migrate a virtual machine configuration of a device from VCS?  You can restore from a backup of the device?

  I know how to migrate the licenses already, but I'm not sure of the configuration itself.  I would really prefer to do it by hand if possible.

  Thank you.

  You can use the backup/restore feature VCS located under the maintenance menu to copy your data and configuration from one server to another.  See the section "Backing Up and Restoring Data VCS" VCS administration Guide on page 296.  Remember to take note of the restrictions, such as the two servers must run the same version of software and contain the same option buttons, among other things to note.

  Furthermore, according your original description, it sounds as if you have already purchased the necessary references (R-VMVCS-C-M-K9 or R-VMVCS-E-M-K9) migration for new licenses of virtual VCS, if not, refer to this thread: vcsvcse-license-migration-material-vm.

• Migrate or restore replacement device?

  Hello. One of our users received a new hard drive. His old hard drive works very well, and he's still using it. We want to put his current CVD of his old hard drive to his new. I was wondering whether to choose 'Restore a CVM in a peripheral replacement', or choose "Migrate to new hardware"? Is there a significant difference between the results of either option, or a benefit of one over the other? Thank you.

  Assuming that you only changed the hard drive, and the ID of the computer physical remained the same, you should do neither.

  Since the wizards common, you must select Disaster Recovery, then replace the hard drive (which I understand is what you did).

  You will then see a list of devices that have been formerly assigned to CVD; your device should be there. Select it and the contents of the disc will be restored.

  Assuming you do not centralize readers other than the system drive (c :)) and that the old drive is connected an additional (like D :), there should be no problem - the D: drive is not damaged.))

• RAW device to the virtual disk migration

  When trying to cold migrate a raw disk device VM of EVA Storage to a virtual disk in a DS8100 it fails with the following message: "incompatible device backup specified for device ´0´" the size of the LUN is Go 510 and appaers message when 100% is full 3 hours laters. I set the block size 2 Mb in the data store, but when I try to migrate a RAw of 100 GB on the same VM migration works very well and I use the new virtual disk without problems.

  This could be a problem with the maximum of storage migration?

  Could you tell me if you know another way to migrate this raw device on the virtual disk?

  TKS!

  Have you tried VMware Converter inside the guest who has the backend RDM?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• iPhone iPhone 4 6 s migration

  HI guys,.

  I own an iPhone 4 16 GB running iOS 7.1.2 and must be upgraded to an iPhone 6. All my data are saved on the computer and iCloud. Am having a problem synchronization and backup of the data of Whatsapp to the cloud. My question is if I set up the new phone and click on restore from a backup, iTunes will restore all the data from the old phone to the new? In addition, any solution to the problem backup whatsapp? It continues spinning and backup ever! I have more than enough space in the cloud.

  Your help will be greatly appreciated. I'm waiting for your answers.

  See you soon,.

  Mel.

  Don't know cause of WhatsApp eccentricities I use not too strongly, but to a migration of the complete device you will need your computer, the latest version of iTunes installed on it (which you seem to have) and two phones. Configure iTunes to store the backup locally on the hard drive WITH PASSWORD (very important for all the personal details get too backed up). Also set to be stored in the local library all apps, music, photos, movies, etc. Have the apps in there is crucial when the food they and their data gets put back in place. When everything is placed and well, synchronize the old phone, watch the bar of progress so everything gets backed up (intermediate steps 6 to 8).

  Then pick up the phone brand new and not configured, connect with iTunes running and choose to restore from this backup when prompted on the computer. If you had already started it upward, wipe (settings / general / reset / erase content and settings) and start the m crept out of the box.

  Keep the old phone until you are satisfied with the migration succeeded. Can always do it again until you get it right, as long as you have the original phone to work with, a new can be erased and reloaded until it is right.

  Been there, done that. 4 iPhones, 3 iPads already. In all cases, the new finished device identical to its predecessor, to the same provisions of screen.

• mass migration of HW

  I am currently conducting a mass migration of hw using the csv file, but the admin guide is not clear how to import the file and how to perform the migration using this file. Can you help me please?

  Hello

  Take a look at the folder level

  C:\Program Files\Wanova\Mirage Management Server > Wanova.Server.Tools.exe MassMigration

  Usage: MassMigration [parameters]
  Parameters:
  -inputCsv Migration CSV input file
  The CSV format is:
  MassWin7Migration - name of the computer, new computer name, ID of database layer, layer Basic Version, Domain, OU (optional) (optional, "none", to vacuum)
  MassUserProfileMigration - Machine, Machine name hold, new computer name, Domain (optional), OU (optional, "none" for empty), ID strategy, political Version, Volume (optional)
  MassProvisioning - name of the computer, new computer name, Base layer ID, Base, Domain (optional) coat Version, OR (optional, "none" for empty), political ID, Version, Volume (optional) policy
  MassMigration - name of the Machine, model Machine, new name of the computer, Base layer ID, Version of Base Layer, Domain, OR (optional) (optional, "none" for the vacuum), Note (optional, "none", to vacuum)
  -outputCsv output file CSV of Migration
  serverAddress - address of the administration server Mirage Horizon
  -domainJoinUsername a join of (optional) fully qualified domain username, otherwise level server username field
  -domainJoinPassword domain join password (optional). otherwise, the mark passes the server domain
  -domainJoinDomain (optional) join field
  -the domainJoinOU OR join (optional, 'none' for empty)
  collectionDescription - Description for migrated CVDs collection
  -ignoreWarnings ignore warnings (optional)
  -validate validate the inputCsv and create outputCsv without migrate (optional)
  downloadAndApply - download and apply the BI of win7 (optional)
  -preOperationCommand the command-line by migration (optional)
  -targetDeviceNamePrefix only devices whose names begin with the prefix specified are used (optional)

• BlackBerry 10 research universal, switch of the appliance, fill... and others

  Hi all

  I intend to throw my BB7.1 device and get the new Z10. However, I am not sure if special features are there or not. Can is anyone of BB10 owners explain if these features are available:

  1-universal Search to search your phone contacts, messages social and different applications by simply typing the expression of research on home screen.

  2. is it possible to use peripheral device BB 7.1 switch application to migrate to the Z10 device? It copies successfully identity, contacts, applications, etc?

  3. as for now, fill BB7.1 with my PlayBook is a good feature that allows me to browse my SMS, messages, BBM discusses the playbook. Will it be the same with Z10?

  4 - What are the applications in the world of BlackBerry for BB10? are there applications reviews those currently lacking? is there some new good apps?

  Hey sdemian,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the questions.

  Universal search will search in contacts, email, browser and other applications BlackBerry 10.

  For data migration it is limits, see this article for more information: www.blackberry.com/btsc/KB33322

  Features supported on BlackBerry and BlackBerry 10 bridge are: tie, display the files on the Z10 BlackBerry PlayBook, remote control and browser for business navigation bridge.

  There is more new apps added daily to BlackBerry World.  Control www.blackberry.com/appworld for updates.

  Let me know if you have any other questions.

  See you soon.

• Post-it notes 'compatibility mode' delivers on Storm

  We have a recurring problem with OS 4.7 and the storm. It goes like this: a customer has a curve (or other older device) and the modernization of a storm. When they migrate to the new device, he puts on our OS version 4.2 of the application to the storm.

  Of course, the storm recognizes that our version 4.2 is not able to touch and places it in the penalty box "compatibility." Then there are numbers that we have a version of the storm on the web site, so that it will download this version.

  Unfortunately, OS 4.7 has already placed the app in the penalty area, so the app still works in compatibility mode (blue border, permanent keyboard). Finally, he comes in contact with our support office and receives instructions to completely remove the app, reboot and re - download version 4.7.

  So here's the problem: it sometimes works, and sometimes it isn't. We are accumulating a growing (and very angry) Group of customers who are still stuck in "compatibility" mode

  Someone has found a sure-fire method to disable this & * % ^ @*) (#& @ compatibility mode?)

  Thank you, we will try to disable manual.

  I also received a note from RIM to set the JAD file with the following property:

  RIMTouchCompatibilityMode = false
  

  Anyone tried this?

• Problem of Smartphones blackBerry App World on PC

  I fought with App World for months since I had to replace my Storm with a curve... I get the message "app is not available...". "that was never a problem on my Storm.  Then I tried to connect to App World on my computer which made me connect my curve and do a verification system, then I accepted the terms and Conditions, and finally I had to link it with a paypal account.  I went through the process and set up, but when she returned the site of App World it remained on the payment information page.  It will not continue after that point and all I can do is click on the "Pay with PayPal" button not telling me that «this prior approval has already been processed...» "Whenever I navigate off the page of payment information that I must begin the entire process signature again.  Like I said, App World is not an option on my phone, so any ideas what I need to do?

  Hi and welcome to the Forums!

  Here are a few kilobytes that may be useful:

  • KB25521"" is not available for download on BlackBerry App World "appears when you try to download an application from BlackBerry App World "
  • KB24200 Screen loops when BlackBerry ID or PayPal authentication is verified in BlackBerry App World 2.0
  • KB20031"BlackBerry AppWorld has problems connecting to the server BlackBerry AppWorld. "Check your network connections, and then try again" appears at the start of BlackBerry App World

  There could be more... but it's a start. You should also check with your wireless service provider and make sure your AppWorld/BBID has been fully migrated over your new device... If they have not completed the migration of backend, which could cause problems.

  The 'last resort' is to find the email you received initially want you AppWorld/BBID. That is a link to use to remove your BBID account. Then you create a new account BBID, using exactly the same powers... that connects the new account with all previous purchases and history. If those who are not important, then by using the same credentials is not necessary... just create a whole new BBID and start over.

  Good luck!

• install new software, but the files are old

  I just got a Palm Centro.  I had a Palm 505 for years, had Palm desktop on my Vista computer for 1 1/2 years.  I installed the Palm Desktop software that came with my Centro on my Vista computer and my calendar, notes, addresses all look as they did there is 1 1/2 years.  I had synced immediately before installing the new software.  I had a return to the top of my file with all these files, so I replaced my 'Kris' file with address, calendar, etc. files.  I closed my Palm Desktop and restarted.  No luck, I'm still all my old info - not up to date.  I have not synced my phone with the computer, because it is not good.  And, I'm afraid to synchronize my current palm and lose everything out there (since my "backup") doesn't seem to work.  Help!  How to bring back all my current info?

  Did you install the version of Palm desktop that you got with the Centro, 6.2?

  There is a procedure to try to recover your files. Search in the following location to the user name of Palm Desktop folder.

  C:\Users\(Windows username) \Documents\Palm OS Desktop\

  Look in the folder of user name for category folders, of addresses/contacts, calendar/calendar, etc. In these files are data files. Search for files with names like address.mdb, address.mdb.bak. The .mdb file is the current data file, the. mdb.bak is the backup file. Try to rename the .mdb file to. mdb.old. Then rename it. mdb.bak (remove the.bak extension) .mdb file. Open Palm desktop and see if the data is there. IF you do not have the .bak file, then you cannot rename to retrieve the data.

  When you migrate to a new device, use of palm desktop 6.2, the files of the old version of Palm desktop in the user name folder are not compatible. You can't drag and drop the files to the new user name folder.  Data in Palm desktop 6.2 files are in a format that Microsoft Access Datbase, so the extension .mdb.

  See if you can rename the files .mdb first to see if you can recover the data. If you can not use method, can 'clean up' uninstall Palm desktop currently installed, install the version you were using before the update, copy the username folder you backed up from the old version and paste it into the old Palm Desktop folder. Open Palm desktop and see if the data is there. Another option is to sync the old device to the old version of Palm desktop and then export the data.

  Once it is installed and you have data intact in the old version of Palm desktop, export data, install the new Palm desktop and import the data. The export and import procedure, you can use the data in any version of Palm desktop.

  If the change of name does not work, do the 'clean' Uninstall using instructions below.

  You should first make a copy of your data to have just in case something
  is happening. You can find your data files by clicking on start--> Documents-->
  Palm OS Desktop. Select your Palm Desktop user name, and then right-click and
  copy. Then go to the desktop of your PC, click on a blank spot block and select.

  Now you want to uninstall Palm Desktop and remove anything that has to do
  with Palm Desktop on your computer.
  Go to the following locations on the PC and delete the folders listed below.
  C:\Program Files\Palm or Palm One
  C:\Users\[Vista username] \appdata\local\virtualstore\Program Files\Palm or
  PalmOne
  C:\Users\[Vista username] \appdata
  * Note You may need to show hidden folders to join appdata. To do this go
  in your control panel and folder options open. Go to the tab and disable
  hide hidden files.
  Once this is done, you will need to remove certain keys in the registry of your PC operating system.

  Word of warning, go here and removing the wrong thing can cause your PC
  commissioning, crashing and deletion of programs and data. If you feel
  you're not sure of yourself, see if you have a friend who can help you or a
  PC technician that you can pay to help you. This procedure will show them everything they need to remove. To make sure that we have a good copy of the current registry, we make a backup of the registry.

  Go to start on your PC in the search box type "regedit.exe" without the quotes.

  Highlight COMPUTER, go to--> export file. Should appear with a save as box.
  Current place of residence is fine, must be within My Documents, or save to a location that you will remember. In the name of the file in low type "backup [todaysdate]" i.e. backup07072008. Then, the most difficult part.

  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. You will be asked, you of course. Say Yes. Do the same for all the keys below.

  If you make a mistake, stop what you are doing. And call a PC technician.
  BUT do not turn off your computer.

  The reg keys are as follows (Note: some of the theses reg keys won't be here)
  But if they remove them)

  * Installation quick HKEY_CURRENT_USER\Software\U.S. Robotics\Palm
  * Transfer of files Robotics\PalmOne HKEY_CURRENT_USER\Software\U.S.
  * Robotics\Pilot Office of HKEY_CURRENT_USER\Software\U.S.
  * HKEY_CURRENT_USER\Software\Palm
  * HKEY_CURRENT_USER\Software\Palm, Inc.
  * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
  * HKEY_CURRENT_USER\Software\palmOne
  * HKEY_CURRENT_USER\Software\PalmSource
  * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm

  Then, restart your computer.

  Then, reinstall your palm desktop from the CD and do a hotsync. If she asks
  for a user name and you synchronized your device before you put "test" If you "
  no sync before creating a hotsync name.

  Message relates to: Palm i705

• No vmnic after update

  Hello

  After the update of esx4.1 to 5 and vm migration, I get no devices eth to the virtual machine. Ubunto says no device. Vmx are two configured in the file. MAC addresses are OK. Machine virtual windows are OK.

  ifconfig eth0

  eth0: error reading interface information: device not found

  Who can help me

  Thank you

  Check with:

  ifconfig eth1

  If the eth has just been renamed, edit the /etc/udev/rules.d/*network* file to remove all the entries and restart the virtual machine.

  André

• Esxi temporary 4.1u1 Server

  I don't want to migrate to a temporary device soon, or better recommended.  Today, I realized that the temporary server I have is not on the HCL for 4.1u1 and that it is in the 3.5.x, era (its also not 64-bit).

  I want the virtual machine that I am about to create on the server of temp to be ready so that when 4.1u1 I take it back to my permanent server, I don't require any kind of path of update later.

  In a previous post, we went on different methods of P2V including: Converter between ESXi hosts, clone on server Vcenter, pulling to VMware workstation and then again when you are ready and the methods of type vMotion (sVMotion didn't, and vMotion got for this scenario).

  Can anyone recommend methods for me to face the availiability of physical server not 4.1u1?  Maybe I can do things with the virtual machines that I think not.  Can I temporarily use a 64-bit "white box"?  But anyway... That's why I'm asking, because I don't know.

  Thank you.

  , We assume that you want to install the operating system will be 64-bit? Find a server no HCL as a temporary location on your virtual computer can be a challenge, as evidenced by the number of "I can't install ESXi on my...» "I would like to use VMware Workstation on a 64-bit CPU, office capable of hardware virtualization machine. You always want to run VMware converter to move the machine it's new homepage on the ESXi host.

• Migration of the existing database of victory ACS 3.3 to device ACS 4.2.15

  Hi all

  Can anyone suggest me how to migrate the db for windows 3.3 acs acs 4.2.15 device.

  We replace the 3.3 victory device 4.2.15 as part of end of life. So we have the eap-tls/peap authentication.

  It has huge files. So suggest me the steps to migrate the db to win 3.3 appl 4.2.15.

  We need to upgrade to win 3.3 to win 4.0 for win 4.2 & then migrate to appl 4.2?

  Or any other way to do it?

  Hello

  You can take a backup copy of the database of the ACS unit. You can install ACS 3.3 in windows. Restore the backup.

  Then you can proceed to 3.3.4 on Windows ACS. make a backup and save it to a different location.

  Upgrade the windows of the CSA at 4.1.1.24. take a backup. Save it to a different location.

  Then the windows of the CSA 4.2.0.124. resume a backup and save it to a different location.

  Now re-images of the device of the ACS for ACS 4.2.0.124. Restore the backup of Windows ACS ACS ACS 4.2.0.124 unit now running.

  Now you can upgrade the ACS unit to 4.2.1.15.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Migration of ACS of the device to windows server

  Hello

  Is it possible to migrate the ACS 4.2 device to microsoft server 2003?

  has tried it before?

  R/g

  There is no problem to migrate from the device of the CSA to ACS for windows.

  If you wish to do this, it is best that your ACS for window running the same version of the code in form of ACS appliance.

  You can do a backup on device ACS and restore it on ACS for windows.