Migration of VCS (VM device)

Similar Questions

• OpenWapp migration to a new device?

  Is it possible to go from the OpenWapp with all contacts and messages from my my flame Keon?

  I learned by watching his source code, OpenWapp seems to use IndexedDB for storage of conversations.

  Using backup_restore_profile.sh, I finally found a way, and I wrote a little HOWTO.

  Migration of the Keon (1.3) to a flame (2.0) seems to work. I write "seems" because I see the messages migrated fine, but I can't connect to WhatsApp for now: OpenWapp registration process has been broken for a few days. Perhaps WhatsApp changed its API.

  Note that simply return the Keon on the flame settings did not work and in fact crashed the device (restart required).

• Migration of es300 to device of esVMWARE

  Good afternoon.  We're upgrading a hard appliance to SonicWALL es300 virtual messaging security appliance.  I have the AV installed on our network of LABORATORIES currently.  A problem is that to restore all the settings/names must match and we are unable to do it on the laboratory.  I did a complete to the top of the production apparatus, then went through each entry (Yes, it was as much fun as it sounds) and changed the names/parameters so that it would correspond to the LAB name and parameters.

  However, after I restored the settings, Junk box, archives, reports, the only thing that seems imported are dictionaries.  There is no date in the archives, no junk mail box or no report parameter info or settings imported.  More importantly, there are no filters.

  I guess if I have to, I can do without the parameters, but I would really like to be able to import existing filters that we have configured.  We have a lot of complex filters long this link in another unit of ORGANIZATION and dictionaries to allow different users send or receive various e-mail or attachments.

  Does anyone have any ideas on how I can get the filters and if possible the undesirable elements, the archives and the report and settings migrate to the new appliance.

  Thank you!

  Hi Dean,

  The all must have the host name even in order to import the backup files.

  If it's just the strategy filters that are not displayed, it seems the file may be damaged. (it probably can be fixed)

  I open a Web folder and attach a copy of your backup and ask if a technician can review explaining the same information you have here.

  There are a lot of files inside backups that contain information about the host name and if not the same may not be present.

  Would have been the right way to get the operational VM with no parameters of first.

  If you can then rename the old device, after getting backups (each article separately) from the user interface, then rename your VM to match the old appliance as well as the IP address if possible. (IP is not necessary).

  Once it is up and the correct name import your backup settings and the other one at a time, separately.

• VCS 'OLD' device and device New VCS cluster "(CE500)" ""

  Hello.

  An easy question, can you do a VCS cluster between the 'old' and the 'new' device? is there a limitation?

  In the prerequisites, I saw some VM 8 hearts, but do not understand a lot.

  Thancks! An optimal day

  Hello Alex.

  As long as the VCS platform is the same (physical or virtual) and running the same versions of software and complete you the prerequisites.  See Maintenance and creation of VCS Cluster Deployment Guide for more information.

  The part on the cores is related to your virtual deployments, so if you use virtual VCS, he wants to make sure that you use the same size of deployment noticed on pg 4 of the installation Guide for the VCS VM.  You don't have to worry about this with the hardware appliance.

• Migrate or restore replacement device?

  Hello. One of our users received a new hard drive. His old hard drive works very well, and he's still using it. We want to put his current CVD of his old hard drive to his new. I was wondering whether to choose 'Restore a CVM in a peripheral replacement', or choose "Migrate to new hardware"? Is there a significant difference between the results of either option, or a benefit of one over the other? Thank you.

  Assuming that you only changed the hard drive, and the ID of the computer physical remained the same, you should do neither.

  Since the wizards common, you must select Disaster Recovery, then replace the hard drive (which I understand is what you did).

  You will then see a list of devices that have been formerly assigned to CVD; your device should be there. Select it and the contents of the disc will be restored.

  Assuming you do not centralize readers other than the system drive (c :)) and that the old drive is connected an additional (like D :), there should be no problem - the D: drive is not damaged.))

• VCS HW license VM migration

  We recently bought 4 x LIC-VVCS-E-M-PAK and 4 x LIC-VVCS-C-M-PAK so that we can migrate all our calls licenses from VCS HW devices to virtual machines, but when I go to buy one of the PAKs I got for the VCS - C, is that display the following information available:

  		LIC-VVCS-C-M-PAK	1
  		LIC-VCSE-100	1
  		LIC-VCS-GW	1

  Shouldn't it allows me to enter the serial number of a device from HW to migrate, then give me licenses relevant call too?  Has anyone else had experience migration licenses HW to VM that might help us with that?

  Hello Nick.

  Please mention the discussion below, you will need to send a certain group with Cisco to process the query to rehost the option unit to the virtual computer buttons.  I am sad to say that it is not no matter how automatic background process that does this when you buy a migration for any product, it is all the manuals and done by the client most of the time.

  vcsvcse-license-migration-material-vm

• RAW device to the virtual disk migration

  When trying to cold migrate a raw disk device VM of EVA Storage to a virtual disk in a DS8100 it fails with the following message: "incompatible device backup specified for device ´0´" the size of the LUN is Go 510 and appaers message when 100% is full 3 hours laters. I set the block size 2 Mb in the data store, but when I try to migrate a RAw of 100 GB on the same VM migration works very well and I use the new virtual disk without problems.

  This could be a problem with the maximum of storage migration?

  Could you tell me if you know another way to migrate this raw device on the virtual disk?

  TKS!

  Have you tried VMware Converter inside the guest who has the backend RDM?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• Part numbers for virtualization VCS

  Dear all,

  Can someone explain what is the difference between the following references:

  R VMVCS-CTRL-K9 - E-Delivery - Virtual VCS Control, incl. FindMe app

  R-VMVCS-EXPWY-K9-E-livraison-virtual VCS Expressway, Netwrk double interface

  and

  R-VMVCS-E-M-K9 - HW migration to E - Delivery Virtual VCS Highway only

  R-VMVCS-C-M-K9 - HW migration to E-Delivery Virtual VCS only controls

  Which to buy if we need to migrate the VCS_Control and VSC_Expressway of the physical device to the virtual?

  Should buy us new option for appliance virtual keys or we can transfer of physical servers?

  Thank you very much

  Nick

  Hello Nick.

  R VMVCS-CTRL-K9 and R-VMVCS-EXPWY-K9
  This is for a new purchase of control of VCS and highway as a virtual machine.

  R-VMVCS-C-M-K9 and R-VMVCS-E-M-K9
  It is for existing control VCS and Express that runs beneath the unit of equipment you want to migrate a virtual machine.  You must buy one for each VCS you want to migrate depending on whether it is a control or a highway.

  When you buy the migration for VCS, keys option will transfer on the virtual VCS.  You will work with Cisco licenses to do this, after the purchase of the migration numbers.

• Upgrade to Cisco VCS

  Good evening everyone,

  I was wondering if I can get help please.

  I had a customer that they want to spend VCS - C version x5.2 a x8.5.1. Its a local migration. I think they got a VCS - C device.

  Now if I update to X8.5.1 I need migration to an intermediate version or I can jump directly from x 5 to x 8. Allso if supposed ei allows for error how i role towards the same out of box of vcs x5.2 - C.

  Any suggestion helps will really be apprreciated.

  Thank you

  You can still improve the apparatus of VCS, the VCs did not fall for the device again.  If and when, which would be reported in the notes.

• iPhone iPhone 4 6 s migration

  HI guys,.

  I own an iPhone 4 16 GB running iOS 7.1.2 and must be upgraded to an iPhone 6. All my data are saved on the computer and iCloud. Am having a problem synchronization and backup of the data of Whatsapp to the cloud. My question is if I set up the new phone and click on restore from a backup, iTunes will restore all the data from the old phone to the new? In addition, any solution to the problem backup whatsapp? It continues spinning and backup ever! I have more than enough space in the cloud.

  Your help will be greatly appreciated. I'm waiting for your answers.

  See you soon,.

  Mel.

  Don't know cause of WhatsApp eccentricities I use not too strongly, but to a migration of the complete device you will need your computer, the latest version of iTunes installed on it (which you seem to have) and two phones. Configure iTunes to store the backup locally on the hard drive WITH PASSWORD (very important for all the personal details get too backed up). Also set to be stored in the local library all apps, music, photos, movies, etc. Have the apps in there is crucial when the food they and their data gets put back in place. When everything is placed and well, synchronize the old phone, watch the bar of progress so everything gets backed up (intermediate steps 6 to 8).

  Then pick up the phone brand new and not configured, connect with iTunes running and choose to restore from this backup when prompted on the computer. If you had already started it upward, wipe (settings / general / reset / erase content and settings) and start the m crept out of the box.

  Keep the old phone until you are satisfied with the migration succeeded. Can always do it again until you get it right, as long as you have the original phone to work with, a new can be erased and reloaded until it is right.

  Been there, done that. 4 iPhones, 3 iPads already. In all cases, the new finished device identical to its predecessor, to the same provisions of screen.

• mass migration of HW

  I am currently conducting a mass migration of hw using the csv file, but the admin guide is not clear how to import the file and how to perform the migration using this file. Can you help me please?

  Hello

  Take a look at the folder level

  C:\Program Files\Wanova\Mirage Management Server > Wanova.Server.Tools.exe MassMigration

  Usage: MassMigration [parameters]
  Parameters:
  -inputCsv Migration CSV input file
  The CSV format is:
  MassWin7Migration - name of the computer, new computer name, ID of database layer, layer Basic Version, Domain, OU (optional) (optional, "none", to vacuum)
  MassUserProfileMigration - Machine, Machine name hold, new computer name, Domain (optional), OU (optional, "none" for empty), ID strategy, political Version, Volume (optional)
  MassProvisioning - name of the computer, new computer name, Base layer ID, Base, Domain (optional) coat Version, OR (optional, "none" for empty), political ID, Version, Volume (optional) policy
  MassMigration - name of the Machine, model Machine, new name of the computer, Base layer ID, Version of Base Layer, Domain, OR (optional) (optional, "none" for the vacuum), Note (optional, "none", to vacuum)
  -outputCsv output file CSV of Migration
  serverAddress - address of the administration server Mirage Horizon
  -domainJoinUsername a join of (optional) fully qualified domain username, otherwise level server username field
  -domainJoinPassword domain join password (optional). otherwise, the mark passes the server domain
  -domainJoinDomain (optional) join field
  -the domainJoinOU OR join (optional, 'none' for empty)
  collectionDescription - Description for migrated CVDs collection
  -ignoreWarnings ignore warnings (optional)
  -validate validate the inputCsv and create outputCsv without migrate (optional)
  downloadAndApply - download and apply the BI of win7 (optional)
  -preOperationCommand the command-line by migration (optional)
  -targetDeviceNamePrefix only devices whose names begin with the prefix specified are used (optional)

• BlackBerry 10 research universal, switch of the appliance, fill... and others

  Hi all

  I intend to throw my BB7.1 device and get the new Z10. However, I am not sure if special features are there or not. Can is anyone of BB10 owners explain if these features are available:

  1-universal Search to search your phone contacts, messages social and different applications by simply typing the expression of research on home screen.

  2. is it possible to use peripheral device BB 7.1 switch application to migrate to the Z10 device? It copies successfully identity, contacts, applications, etc?

  3. as for now, fill BB7.1 with my PlayBook is a good feature that allows me to browse my SMS, messages, BBM discusses the playbook. Will it be the same with Z10?

  4 - What are the applications in the world of BlackBerry for BB10? are there applications reviews those currently lacking? is there some new good apps?

  Hey sdemian,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the questions.

  Universal search will search in contacts, email, browser and other applications BlackBerry 10.

  For data migration it is limits, see this article for more information: www.blackberry.com/btsc/KB33322

  Features supported on BlackBerry and BlackBerry 10 bridge are: tie, display the files on the Z10 BlackBerry PlayBook, remote control and browser for business navigation bridge.

  There is more new apps added daily to BlackBerry World.  Control www.blackberry.com/appworld for updates.

  Let me know if you have any other questions.

  See you soon.

• Post-it notes 'compatibility mode' delivers on Storm

  We have a recurring problem with OS 4.7 and the storm. It goes like this: a customer has a curve (or other older device) and the modernization of a storm. When they migrate to the new device, he puts on our OS version 4.2 of the application to the storm.

  Of course, the storm recognizes that our version 4.2 is not able to touch and places it in the penalty box "compatibility." Then there are numbers that we have a version of the storm on the web site, so that it will download this version.

  Unfortunately, OS 4.7 has already placed the app in the penalty area, so the app still works in compatibility mode (blue border, permanent keyboard). Finally, he comes in contact with our support office and receives instructions to completely remove the app, reboot and re - download version 4.7.

  So here's the problem: it sometimes works, and sometimes it isn't. We are accumulating a growing (and very angry) Group of customers who are still stuck in "compatibility" mode

  Someone has found a sure-fire method to disable this & * % ^ @*) (#& @ compatibility mode?)

  Thank you, we will try to disable manual.

  I also received a note from RIM to set the JAD file with the following property:

  RIMTouchCompatibilityMode = false
  

  Anyone tried this?

• TMSPE "User Import.

  Hi all

  There are few things that I want to clarify. Please help.

  In PE of TMS, the software has 3 selections for the import of the user.

  1. service active Directory

  2 w active Directory Kerberos

  3 LDAP

  Issues related to the:

  1. If I use Windows 2008 AD, should what options I choose? (Cisco TAC told me that Active Directory is Windows LDAP. Is this true?)

  2. for 3 selections, will be the password both imported into PE MST?

  3. for synchronization, it will synchronize manually or automatically for all of the above?

  Appreciate your kind assistance here.

  Thank you.

  Hello

  1. choose Active Directory, unless you have set up your ad with kerebos authentication. If not, or you are unsure, choose Active Directory.

  You can say that Active Directory is Windows LDAP Yes. Active directory provides a directory data store and uses LDAP (Lightweight Directory Access Protocol) (v2, v3, kerebos and DNS).

  2. not the password will be automatically generated once the user has been imported into the configuration directory. If you want users to authenticate to AD then set up on the VCS under "Devices to authenticate" and find the configuration of Active Directory (X7.2). Once users connects to the VCS forwards the request to your ad that will authenticate the request.

  3. it will sync every 24 hours. It is not editable and is a fixed time.

  / Magnus

• Problem of Smartphones blackBerry App World on PC

  I fought with App World for months since I had to replace my Storm with a curve... I get the message "app is not available...". "that was never a problem on my Storm.  Then I tried to connect to App World on my computer which made me connect my curve and do a verification system, then I accepted the terms and Conditions, and finally I had to link it with a paypal account.  I went through the process and set up, but when she returned the site of App World it remained on the payment information page.  It will not continue after that point and all I can do is click on the "Pay with PayPal" button not telling me that «this prior approval has already been processed...» "Whenever I navigate off the page of payment information that I must begin the entire process signature again.  Like I said, App World is not an option on my phone, so any ideas what I need to do?

  Hi and welcome to the Forums!

  Here are a few kilobytes that may be useful:

  • KB25521"" is not available for download on BlackBerry App World "appears when you try to download an application from BlackBerry App World "
  • KB24200 Screen loops when BlackBerry ID or PayPal authentication is verified in BlackBerry App World 2.0
  • KB20031"BlackBerry AppWorld has problems connecting to the server BlackBerry AppWorld. "Check your network connections, and then try again" appears at the start of BlackBerry App World

  There could be more... but it's a start. You should also check with your wireless service provider and make sure your AppWorld/BBID has been fully migrated over your new device... If they have not completed the migration of backend, which could cause problems.

  The 'last resort' is to find the email you received initially want you AppWorld/BBID. That is a link to use to remove your BBID account. Then you create a new account BBID, using exactly the same powers... that connects the new account with all previous purchases and history. If those who are not important, then by using the same credentials is not necessary... just create a whole new BBID and start over.

  Good luck!