Ports 5821 5800 and 5900-5921

Similar Questions

• WSD port for printers and TCP/IP ports monitor, what is the difference?

  There are a lot of discussions on IP etc. addresses for printer problems. There is no mention of a new feature for the port for printers, WSD port for plug-and-play printers, I assume that the IP addresses have no importance with WSD, my printer is vaguely configured for the WSD port and TCP/IP port, can someone please expain

  Here is a description I found

  The WSD Port Monitor is a new printer port monitor in Windows Vista and Windows Server 2008.  This port monitor supports printing on network devices that are designed to include Web Services for devices (WSD) technology.  Services Web for devices allows devices connected to the IP-based network announce their functionality and to provide these services to customers using the Web Services Protocol.  Clients and devices WSD communicate on the network using a series of SOAP (Simple Object Access Protocol) messages on UDP and HTTP (S).  WSD for devices offers a plug-and-play network experience that is similar to the installation of a USB device.  Services Web for devices also defines a security profile that can be extended to provide additional protection and authentication by using certificates based on the device.

  WSD is not a port, but a port monitor.  A port monitor looks at information from the TCP/IP port and makes routing or changes based on what happens in the port.

  This link has some in the description of the depth of the WSD port monitor:

  http://blogs.technet.com/b/askperf/archive/2008/02/11/WS2008-the-WSD-port-monitor.aspx

  Back to the comparison of the IP address as a P.O. box.  Once the letter arrives in the POST box, someone needs to come empty the box or letters are going no where.

  When the data comes in the TCP/IP port a port monitor is where I look for that to happen.  The WSD port monitor would take over this function from the standard TCP/IP port monitor.

• Visa read write on port series independently and at the same time!

  Hi all!

  I need to read and write data to and from a serial port (rs232) independently and simultaneously .

  I'm sorry that I can not put a picture of that, but it's very simple:
  

  I used "set up the serial port" and forwarded to two while loops, the resource reference.

  a loop is reading data and the other loop is writing data to the port.

  the problem is when the playback loop (function serial reading) waiting for data - it blocks the other loop to run (writing of the serial function is blocked).

  I searched the forum and find this visa open function has 'duplicate session' option - that's what I need?

  If true, can someone explain exactly how to wire and use it in the right direction?

  Thank you very much.

  Guy.

  OK, I found an example that solved my problem: a VI called   serialduplicatesessions.

  The file is associated.

  Here is the link for all cases: http://zone.ni.com/devzone/cda/epd/p/id/1727

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• RV110W port forwarding issue and firmware 1.1.0.9

  I saw a reference to the date of issue for firmware 1.1.0.9 (I think it was the number) for the RV110W but if I navigate on the firmware download page I only see 1.0.1.6 available for download.  Is it available somewhere or I I confused and saw a reference to something else?

  I have a RV110W installed on a customer site that must be restarted about once a week because it stops, allowing incoming access to mapped ports.  For example, it stops transfer of connections on Port 25 for the e-mail server of the customer.  I thought for a while there was a problem with the mail server software, but after the elimination of other issues likely days, I rebooted the router and everything was fine.  Now the problem recurrs about once a week and reboot the router always fixed (it's week 3).  Shipping to ports 80, 443 and several others also stop working.

  I was hoping that this has been fixed in a firmware fix, but maybe someone has seen this problem?

  Thank you.

  The 1.1.0.9 firmware image is now available for download here:

  http://www.Cisco.com/Cisco/software/release.html?mdfid=283879340&CATID=268437899&softwareid=282487380&release=1.1.0.9&relind=available&rellifecycle=&RelType=latest

  This version of the firmware will not work with earlier versions of the language pack.  When you upgrade to the 1.1.0.9 firmware version, it is recommended that you check the option "Reset to factory default.

• Change the default ports for http and https

  Hello

  I'm trying to change the default ports for http and https

  I have a 506th PIX (which does NOT of NAT)

  I have the following: -.

  static (inside, outside) tcp 192.168.10.2 601 192.168.10.2 http netmask 255.255.255.255 0 0

  static (inside, outside) tcp 192.168.10.2 602 192.168.10.2 443 netmask 255.255.255.255 0 0

  access-list acl permit tcp any 192.168.10.2 eq 601

  access-list acl permit tcp any 192.168.10.2 eq 602

  Access-group acl in interface outside

  where 601 and 602 are the http port and https to be redirect to respectively.

  I changed the webserver accordingly

  I get the error message

  "No group of translation not found for tcp src outside:189.x.x.x/50232 dst inside:192.x.x.x/80" (trying to access port 80)

  "I also have ' fixup protocol http 601.

  I had access to the internal and external web server before attempting to change the default ports

  Any ideas where I'm wrong?

  See you soon.

  I apologise for not thinking correctly.

  the static method must be:

  static (inside, outside) tcp 192.168.10.2 80 192.168.10.2 601 netmask 255.255.255.255 0 0

  static (inside, outside) 192.168.10.2 tcp 443 192.168.10.2 602 netmask 255.255.255.255 0 0

• Their is something stuck on my port of lightning and cable does not fit on my phone solutions please?

  The cable does not fit on my phone because it is stuck on the port of lightning

  6 iPhne

  Download the right cable before you damage your product and void the warranty.

  http://www.Apple.com/shop/iPhone/iPhone-accessories/power-cables

• With the help of v31.4.0, anyway I can designate the server ports as 110 and 25 instead of 110 and 587 for Bitdefender anti-spam?

  Thunderbird server ports won't allow to 110 and 25, only 110 and 587. Any suggestions?

  Go to the account settings-> settings for outgoing (SMTP) server and highlight the name of the server; then click on change. You should be able to change the port there. 25, 465, 587 and 2525 ports are all possibilities.

• Portege Z30 16 GB with high speed Port Replicator III and two monitors - resolution

  I have a Portege Z30 with 16 GB of Ram, connected to a Toshiba high speed Port Replicator III which is connected to two monitors running in mode extended.

  The monitor attached to the first section of the video is 1920 x 1200 running.
  However the second monitor is only show support for a maximum of 1280 x 1084.

  The monitors are identical, and both are connected by DisplayPort cables.

  I tried to lower the resolution and save the settings on the first monitor to see if it offered options on the second monitor, but the options remained the same.

  At this point, I have narrowed down to 1280 x 1024 so that it conforms to all the monitors but would like to a plus-res solution.

  Does anyone know if there is a fix/work-around for this?
  If this is a hardware limitation, has anyone tried a USB 3 to DisplayPort adapter in a similar configuration?

  Thank you!

  At the same time using two displayports?
  I wonder how it is possible, because of my knowledge it is not possible... as far as I know the Port Replicator III supports two DisplayPorts but you could choose and use one of them...

  In any case, you can use both with a lower resolution, I guess that this problem can be caused due to incompatible display drivers.
  I suggest you to uninstall reinstall or update the display drivers and check if it helps

• Express Port Replicator II and Tecra A10 - 12Z - only the power and LAN

  Since my Toshiba T3600CT I received with docking station, I discovered that I have a docking station. In the meantime, I had a small Sony who had no docking station, for which I got one of the first USB docking station and since then I've seen always to get laptops with docking station.

  But this time something went really wrong, the Toshiba Express Port Replicator II PA3680E-2PRP provides only power and LAN. There is no power in the USB ports, so no serial port or the sound, and DVI and VGA are also disabled.

  All these ports work fine on the Tecra A10, but not on the docking station.

  Of course, it is nice to have the power and LAN, but not when I expected too much of everything.
  So I was wondering if anyone has had a similar problem, it is like upgrading the BIOS for me who have not installed all the necessary software, or is it a fuse or something I could fix myself or is it a faulty docking that shouldn't have left the factory?

  Hello

  What's your Tecra pre-installed with original recovery image?

  When the laptop is preinstalled with recovery image simply connect compatible laptop Toshiba docking station and all the devices connected to the docking station will be recognized correctly and all available ports should work fine.
  Is that a Port Replicator basically "replica" ports on the laptop.

  On this virtual path, we cannot say that this port is 100% OK. What can you say about it? you bought is used a?

• USB Port Replicator II and IEEE1284 - Windows XP

  I have a replicador (Px1098e-1prp) port and it is impossible to operate LPT (IEEE1284) however in Windows 98 works perfectly. I have a M30-801 and I also proved in several computers, and it won t work with Windows XP. How can I do works?

  Thank you!

  Hello

  The only thing I can tell you is that you need to check the user's manual and it is described how you set up the printer in Windows XP Home edition. You can find it on page 24 (English).

• Problems with an external monitor with the Port Replicator III and M100

  Hey all.

  I just returned from a trip where I took my laptop. Plugged into the Port Replicator port, started and everything was fine. Then after an hour or two, the monitor stopped receiving a signal. I repositioned the laptop and everything was good again. He then loses signal once again, and I was not able to get a signal via the port replicator since.

  The monitor works fine through the hole at the rear of the M100.

  I checked the pins on the Port Replicator port and portable, none folded and tried to clean any dust etc. Still no signal to the monitor.

  Someone has ideas of how to do to solve this problem?

  Jamo

  Hello

  The Toshiba 3 mobile extension is responsible for the good condition of the duplicator 3 market. Try to reinstall this utility and also check the page of the Toshiba driver for updates.

• Desktop Intel Celeron 100 - 400A: how will I know if the ports are USB2 and USB3

  I have an Imation USB 3.0 portable external hard drive. When I unplugged it today, at the front of my desk, he said she would transfer more quickly by using a USB 3 port.

  I have two usb ports on the front of the unit, three at the back and the other under these that says SS. Are all the USB3 ports, or just the one that says SS.

  Thank you very much.

  Hello

  Its specifications:

  Ports of e/s front

  • USB 2.0: 2

• No Audio or USB ports with Port Replicator 3 and Portege R600

  I have a problem between my Port Replicator 3 (PA3681E-2PRP) and my Portege R600-13 X (Win7 Pro 32-bit). Everything has been working well for the past few months until a week ago. My PC has developed a problem then that plugged on the Port Replicator, it will not recognize something new that is connected to the USB (two PC & Replicator ones) ports, the Replicator audio output no longer works and the PC hangs during shutdown. Everything is OK with the PC when booted without the Replicator, but as soon as it is connected to the port replicator, in this case.

  I tried looking for information about this problem, but nothing helps... Any help to fix this would be greatly appreciated as it is to set up a business and I need it to work properly.

  A few things to try:

  Reinstall the Toshiba Value Added Package.
  Use system restore to restore Windows to a previous state.
  Check the connector for docking station for damage.
  Back up your data and perform the recovery.

  If its still does not, then I would send the laptop and the Port Replicator Port for an ASP for repair.

• Satellite L650-0ED - ports external monitor and turn off WiFi

  Hey,.

  1. I have a Satellite L650/0ED, I was wondering if the HDMI and the external monitor port start when starting and if they cause the start time of the laptop to be slower. If they do slow down the start how disable them you using Device Manager, since I looked, I tried to disable the Device Manager; but I can't find them anywhere on the list of devices.
  They have a special code name or something?

  2. based on my understanding, the manual of instruction/userguide Toshiba mentions if I press FN + F8 it turns off the wireless amber light but this is not the case, since the amber wireless is still or not. I have the wireless active or disabled.
  It say it's so I have the wireless off of amber or the - Orange must be turned off when I press FN + F8 and is not, why is this?

  Thank you

  Hey Buddy,

  1. No, they cause t a slower start. He doesn't know me and as long as I know it of not possible to disable the ports in the BIOS. Then n t you worry about this, even, you have connected external screens, boot time is the same.

  2. Yes, usually you can activate the WLAN functionality by using the FN + F8 key combination.
  I put t have the laptop in front of me, but normally if you don t have a hardware wireless switch, you can disable the wireless network adapter in the BIOS. Just put permits for disabled people and that should be all! :)