Migration of the partition of the BONES of a small disc to a larger drive.

Similar Questions

• Transfer of license and the migration of the BONE

  Hello

  in the case of a transfer of license (a second-hand purchase Photoshop cs6), is - it possible to change the target of the BONE (moved from Mac to PC)?

  Concerning

  License transfers and swaps of platform can be made at the same time, he may just take longer since a new serial number must be issued. Refer to this:

  Transfer an Adobe product license

  Exchange a product for a different version of the language or platform

  Mylenium

• ProBook 4330 s: F11 doesn't work is not to recover the BONES of the recovery Partition

  Hello

  I want to reinstall the Windows operating system of my partition recovery and not able to do that through the F11 key in the start screen because by pressing F11 continiously, the window not take me both recovery and instead of normally take me to logon windows screen (also get a beep sounds while I press the F11 key at all times).

  Earlier I tried all of the following methods:

  (1) were trying to partinoed drive to primary disk management (for which options does not come when I right click on the drive of partitoned.)

  (2) cannot make bootable disc (burning IOS) because my CD/DVD burner does not work.

  (3) including ' have software Recovery Manager installed technologicalinbuit (can I do now if I could pick the windows by this method), can advise you if it can be installed and can run for me.

  Thank you

  Hello

  If you have a file ISO of Windows 7, another option, you can try would be to create a bootable USB and install from it.

  If you need a utility to create a bootable Image file from Flash drive, try the free app below.

  http://Rufus.AKEO.IE/

  Kind regards

  DP - K

• Can I repair the BONES using recovery without loss of important data CD?

  I have a problem with my laptop Satellite 1100. The windows OS is somewhat damaged and now won't start. I tried the usual 'use last good config' and boot into "safe mode" but none of these work.

  Is there a way using the product recovery CD to fix this without losing the photos and important documents?

  Any help appreciated.

  Hello

  Restore CD provided you can install new OS. There is no option for any type of repair of the BONE. I don't know how your disk is configured, but if you have 2 partitions, and all your important data is backed up to the second, you can install the OS on the first partition using Expert mode.

  Right now, you can try to get the facilities of Microsoft CD and try to repair the operating system preinstalled.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• Migration of the existing NTFS files in a virtual drive with ESX4i

  I have an existing Windows Vista system with a SATA 1.5 TB filled with large files on an Intel quad-core box.

  I would like to migrate this to an ESXi server on which I can run multiple virtual machines.

  I bought a new 2 TB drive and a plan to install ESX4i on it.  I disconnects the 1.5 TB of disk during installation so I do not lose my existing files.

  Question: What is the best way to transfer the contents of my NTFS partitions in a sufficiently large VMDK into a new virtual machine running?

  A really slow method would be to use a SATA/USB adapter and copy the files on the USB bus virtualized virtual machine.

  Is there a way I can build a 'temporary' virtual machine by editing the vmx virtual machine file so that I can map a virtual drive at/dev/disks/xxxxx of the hypervisor?  As soon as I knew I could map it, its trivial to have a virtual machine linux, mount the ntfs volume, and then transfer the files to a virtual machine second.

  (I did play a little bit, and it seems that the biggest disk virtualized I could create in a virtual machine under ESX4i 250 GB.  No problem, since I can create a handful of small discs and then link them together using LVM, but it seemed weird and maybe a problem with my system.  Not sure if this has no effect on my question, but better ask guess.)

  Thank you very much

  Maximum virtual disk size:

  Default ESXi sets the size of the block of VMFS 1 MB data store, which translates into a maximum. Size of 256 GB VMDK.

  (see block a VMFS data store size limits for more details)

  If you need larger virtual disks you just remove the data store created during installation and create a new one with the size of the desired block (Configuration-> storage). In your case it would be the block size of 8MB.

  All the data on the data store will be lost. So make sure you do this right after the installation or you back up a VM already created!

  André

• Authentication of the BONE in 10g

  Hello
  
  I'm a little confused about the OS authentication in ORACLE 10 g.
  
  For the authentication of the BONE, we need a user needs be identified 'the OUTSIDE '.
  
  But 10g is ignoring this rule.
  
  Please refer below
  
  [cuser@linux01 ~] $ sqlplus "/ as sysdba".
  
  SQL * more: Release 10.2.0.1.0 - Production on Mon Oct 25 18:32:26 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options
  
  SQL > select name from v$ database;
  
  NAME
  ---------
  MODEL
  
  SQL > select status, database_status from v$ instance;
  
  STATUS DATABASE_STATUS
  ------------ -----------------
  OPEN ACTIVE
  
  SQL > show the operating system parameter
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  OPTIMIZER_INDEX_COST_ADJ integer 100
  OPS os_authent_prefix string $
  OS_ROLES boolean FALSE
  REMOTE_OS_AUTHENT boolean FALSE
  remote_os_roles boolean FALSE
  timed_os_statistics integer 0
  
  SQL > create user ops$ cuser identified by CLI.
  
  Created by the user.
  
  SQL > grant create session to ops$ cuser; 2
  
  Grant succeeded.
  
  SQL > conn ops$ cuser/CLI
  Access to the PRODUCT_USER_PROFILE error
  WARNING: Product user profile information has not loaded!
  You may need to run PUPBLD. SQL as SYSTEM
  Connected.
  SQL >
  SQL > exit
  Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options
  [cuser@linux01 ~] $ sqlplus /.
  
  SQL * more: Release 10.2.0.1.0 - Production on Mon Oct 25 18:34:45 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  Access to the PRODUCT_USER_PROFILE error
  WARNING: Product user profile information has not loaded!
  You may need to run PUPBLD. SQL as SYSTEM
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options
  
  SQL > show user
  The USER is ' OPS$ CUSER ".
  SQL > exit
  Disconnected from the database to Oracle 10 g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options

  The note "CUSER is the DBA group" says it all.

  There are two types of authentication of the BONE
  Those of the DBA group.
  Those not in the DBA group
  Identified users externally should NOT be in the DBA group and connect to sqlplus / not to sqlplus .

  --------
  Sybrand Bakker
  Senior Oracle DBA

• all my icons that were normally at the bottom of the screen have migrated to the right side and are all bundled together how to place their return to the bott

  I recently bought a HP 15 laptop with 8.1. I use mainly desktop with latest Mozilla. All my icons that is usually found at the bottom of the screen have migrated to the right side of the screen and boots, to the top, I can't do your choice. I tried to customize without result. I am 75 but strive to keep abreast, but it baffled me.

  Sorry, it's a question of support of Windows, the Windows taskbar does not part of Firefox. I do not use Windows 8.1 myself, and I don't know if the process is the same as on my Windows XP - but maybe click and hold and drag this bar down might work like on Windows XP.

  If you do not understand what I said, or it does not work, here is a popular Windows 8 support forum that should be able to help you.
  http://www.eightforums.com/

• Migration via the time machine (old imac) to new imac done numbers keynote pages and other programms disappear

  Migration via the time machine (old imac) new done imac numbers keynote pages and other programms disappear - what is my mistake?

  You should be able to re-download your apps purchased on the Mac App Store.

• After the installation of 12.0, I get popups and migration from the lower left of my screen that will heal all the ads block settings.

  Whenever I visit a new Web site I can wait for one of my first 'clicks' to open a new window with something like a Quibids announcement or a site with audio asking me to take a survey vaguely regarding the site I'm. There is also an ad in the migration of the lower-left corner of my screen that no amount of effort will get rid of. It didn't happen until last week when I downloaded the latest version of Firefox. My OS is Windows 7 on a Toshiba laptop. I connect with a hotspot from Verizon at home only. I scan all emails before downloading from the server PC of the population. I ran most of Windows and a couple of free virus programs did a full scan nothing helps. This problem does not exist when I navigate with Windows Explorer.

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Need to retrieve the BONES but do not have the habit of losing data on the HARD drive

  Dear all!

  For long time now, I tried to disable a Trojan horse or a worm, on my Windows XP Home (Home!) i.e. get rid of the cftmon_.exe, when I decided to follow the instructions from Symantec and pieces manually deleted from the register, I guess she was part USERINIT (turn off the system before restore and put on after the deletion).

  It can be as well as I did not right, something after the fact that I have would be to end the session at the time the logon process has started. This is relatively known issue here, with different options.

  -J' need to keep the data on two HARD drives.
  -I have no other partitions.
  -I don't know what I've got on one of them, which I could use to free space Recovery Expert mode.

  a. the fact that I want to take the option with Toshiba, which is Expert mode (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2513&tstart=125) as a last recovery, DVDs on

  b. I have trouble with the installation of the Recovery Console (with Windows XP (Professional!) original CD, 'R' for 'fix), but I would get the message "Setup has not found hard disk units installed in your computer"...
  I understand that I would need to install the driver RAID (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20093&messageID=73758) but I'm afraid that this may delete the data on the disc.

  My questions are the following:

  1 install the RAID driver (downloaded from the Toshiba off site web http://support.toshiba-tro.de/tools/updates/raid-drv/raid-drv-qog20-xp-1380.zip and installed on the floppy drive I guess) so we hope to install the Recovery Console, and do the rest of the work, make data disappear my 2 (remove) HARD drives?

  2. If I use Toshiba Recovery DVD, Expert mode that is finally what is the size of partition should be recorded for the mirror on the half vacuum 1.HDD?, should I partition 2 HDD, after it backup and count data will be lost? Choose any setings special during the process, apart from those mentioned in the link above? What should I do after wards? The registry damaged when you logged in and how can I build? I will be able to use personal and archive data from Microsoft Outlook?

  3. is there a alternative with UBCD4Win and UBCD? What is the best? What is the procedure of after the start of the CD after reboot? How to copy/repair the userinit files?

  I'm sorry for the load of information, but I am pretty stuck. All the necessary data for my normal life are buried here!

  A big thank you JohnnyS, tw, Quad, Eldorado and many others!

  See you soon!

  Hi friend

  I would like to respond on comments like yours, it s a good exercise for my work and my s really cool to have a few topics which will help all the people here.

  JohnnyS is a friend of mine who works with me at our office and we talked a bit about your problem.
  If his opinion is to use the UBCD4Win and work with this option.

  The advice from him were:

  Take a USB - HDD enclosure and put a disk in it and start with UBCD4Win. Copy any important data in a folder on the external HARD drive, then remove the uneeded data on this subject. Only important data!
  Make a backup of your data on the external hard drive for two HDD´s I hope that you have enough free space.

  Format the drive in your machine and get it back. Install the system as usual on your first HARD drive.
  Then put the data anywhere.

  So I don't know if I have it just ask, a little more explanation would be useful. I think that this is a long thread. ;)

  Welcome them

• Windows Update has disappeared from the BONE. __

  I am using windows 7 32 bit.
  Windows Update gives me an error "Windows update does not work because the service is not running. Please try to restart the computer. When I open windows update by using the start menu, it takes about two minutes to open, then there is a red X beside where it says click to launch updates. When I click that is gives the above error.
  Also in my fix PC next to the clock. She has that I click so I can not change this setting either this "change window update.
  Seems that windows update has disappeared from the BONE.

  Hello

  Welcome to the Microsoft answers community site. I suggest you try these options:

  Option 1: Make sure that Windows Update Service is running, or if a force start it takes

  1. open run it and type services.msc, and then press ENTER.

  2 locate the underside of services in all install services list.

  Windows Update (a)

  (b) BITS (Background Intelligent Transfer Service)

  (c) cryptographic Services

  3. check that the status is started. If the condition column is blank, right-click on the service and select start.

  4. always make sure that the Startup Type is set to automatic, and then restart the computer.

  Option 2: How to reset the Windows Update components?

  Run the Microsoft Fixit tool to reset Windows Component Update.

  http://support.Microsoft.com/kb/971058

  See also http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Option 3: search for viruses and malware

  (A) online scanner to check if a virus is a cause of this problem. Follow the link to run a scan online http://onecare.live.com/site/en-au/default.htm?mkt=en-au

  Or use Microsoft Security Essentials - free

  http://www.Microsoft.com/Security_Essentials/

  (B) check for the shape of software malware malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.mspx

  Or

  Follow the link below on how to get rid of malware: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

  Let me know if it works. Good luck!

  Hope this information is useful.

  Thank you and best regards,

  KKS Vijay

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• (Redirected) poweredge 2950 change all readers while keeping the BONES

  I have a poweredge server 2950 with 5 x 145GB sata HDD and installed a windows 2008 R2, and I SAS 6 x 2 TB hard drives which I bought to upgrade all the hard drives on the server, how can I do that without losing the BONE? I'm new on the environment and I would be grateful to give me advice and measures on this matter, thank you very much.

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• How to validate Windows 7 after the migration of the HDD to the SSD on a laptop?

  I upgraded my laptop with a Windows 7 OEM and windows has migrated to the new SSD.

  Now he tells me that my Windows is not genuine, even after that I tried to activate my windows again.

  It's the same machine and the same product key, just a different SSD.

  What should I do?

  Edit:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-*-*-*-PVDR2
  Windows product key hash: U3gFvytkRKyyDaU2zHOKAPpt02w =
  Windows product ID: 55041-011-2754703-86388
  Windows product ID type: 6
  Windows license type: Volume MAK
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {D17ADED6-DDC8-40A5-8614-BD86AB6E2A88} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\en-US\sppc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\slc.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\slcext.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppuinotify.dll.mui[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\en-US\slui.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\en-US\sppcomapi.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppcommdlg.dll.mui[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\en-US\sppsvc.exe.mui[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\en-US\user32.dll.mui[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {D17ADED6-DDC8-40A5-8614-BD86AB6E2A88}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-BATH55041-011-2754703-863886S-1-5-21-2632269440-3034877388-763067593LENOVOLenovo IdeaPad Y580LENOVO5DCN36WW (V2.03)20120503000000.000000 + 0001 090409South Africa Standard Time(GMT+02:00)1AE4D3307018400FE3LENOVOOC-01 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
  Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 55041-00172-011-275470-03-7177-7601.0000-2582012
  Installation ID: 000401724701945290880302308912032665376104509226579985
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: PVDR2
  License status: licensed
  Remaining Windows rearm count: 3
  Time to trust: 2015/12/17 16:04:12

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000000EF60
  Event timestamp: 12:17:2015 15:26
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui

  --> HWID data
  Current HWID of Hash: MgAAAAIAAQABAAIAAAABAAAAAwABAAEAln18JLIDdxYu8ky89I1Eo9DWVvus90a5lmM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO OC-01
  FACP LENOVO OC-01
  HPET LENOVO OC-01
  BOOT LENOVO OC-01
  MCFG LENOVO OC-01
  UEFI LENOVO OC-01
  ASF! LENOVO-CB-01
  SLIC LENOVO OC-01
  SSDT LENOVO OC-01
  ASPT LENOVO OC-01
  FPDT LENOVO OC-01
  SSDT LENOVO OC-01
  SSDT LENOVO OC-01
  SSDT LENOVO OC-01

  According to your report, you use a Volume License customer who is only available for Volume License customers who deploy Windows 7 in bulk. Where did you got this license?

  If you got through the employer, try to contact the volume license activation center to reactivate:

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx