Mini 110 c-1040DX

Blue first assistance it filtered, then I tried to put in safe mode wouldn't work now his turning point but does not not towards the top of the screen remains empty even through the power light is on.

Hi @Dessi06Vari,

I understand that you have a blue screen, restart your computer and tried to enter safe mode and now the Compaq Mini 110 c-1040DX PC will not start. I'll try my best to help you with this problem.

I suggest to do a hard reset or forced to hand over first and then follow the steps in this document for white screen LED Error Codes see if we can determine the cause of this problem.

I hope that this information help, please let me know how it goes.

Thank you and have a great day!

Tags: Notebooks

Similar Questions

  • HP Mini 110 c-1040dx

    problems with the audio drivers for xp hardware said installation incorrect when I install? a little help would be appreciated thanks

    Hello

    Please try this one first:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=PSG_I23303-108286

    Hope this helps

  • HP Compaq 110 c-1040DX not sound

    HI -.

    I know it's a common problem with the Mini 110 and tried a few solutions here in the forums.

    The last done worse.

    Computer is a HP Compaq Mini 110 c-1040DX

    System - Win XP Sp 3

    Symptoms before: I had his advance bu the sound was cracklely and gargled - I discovered that it was a codec problem or at least it seems to be. After removal of all players and codecs and reinstall everything just its VLan and WMP 11 was fine. Worked very well. That's all a week or two ago.

    Watching a tutorial - the next night, I think I've installed the driver for Qualcom. Tried to watch a tutorial and no noise at all.

    Current symptoms:

    No sound video

    No sound from audio files

    No sound from speakers.

    No sound from headphones.

    Actions have been: I searched and found here in the Forums a few people have had the same issue - I ddn can't see unresolved to this day.

    I pretty much everything uninstalled all drivers for pretty much everything and re-installed them - deleted and reinstalled all players, including a rear roll of WMP.

    Still no sound at all.

    I followed the instructions here by HP that said to go in safe mode and remove all audio drivers, leaving codes. I went a step further and removed the IDT Audio Codec.

    Re-started-re-installed the codec IDT Audio Driver.

    And here's where the problem is getting worse... Driver Audio HP's will not reinstall drivers. Only codecs.

    Missing now and I can't find are the High Definition Audio Controller and driver AUE.

    Currently still no sound and now... no drivers...

    I really need the audio back working on this model.

    I don't have installation CD/DVD and it is DVD player anyway - no I do not have an external.

    It is there no on this comp recovery partitiion is... (HP has really thought this through the I see)

    I worked on it for a few days now...

    Anyone mind giving me a hand to solve this problem.

    Firstly of course, I need the audio drivers and controllers...

    An ISO of the OS would be nice if someone hosted him for this model as well.

    being human, there is no dvd drive a whole... HP hosts ISO to download right...?

    Sorry if I seem a bit short, but... I followed the instructions of HPs, and now I'm more secure that I was when I started.

    Any help is appreciated,

    Chase

    I mean - HP has known about this ongoing issue for what...? 6 - 7 years now.

    And no solution was never displayed

    Nobody here actually found a solution in one of the last sons.

    No one dared even to give a solution in the place where the drivers are that are needed are not on the page of the driver for this model

    Or did someone post a link to the operating system that is the only way to install this OS to have ISO or an additional external DVD drive.

    So another words - there is no real computer scientists on this forum who can manage to help solve this issue or any other issue that does not pointing to the pilots in the section driver on the site of HP - right?

    Hey well thanks to all - let me know when you need help...

    And HP - guess we'll have to Tweet away from bring you to post the solution and still less the ISO yourself rather than wait on everyone else to solve the problem for you.

    And even though I have several - you can see why I hate to buy HP or any other prefabricated comp or laptop.

    They do not support them - and support forums cannot make it past a determination that does not include pointing to links hosted pilot.

  • HP mini 110-1110SA: HP mini 110-1110SA locked

    I try to repair my old HP mini 110-1110SA but it has a bios lock and I forgot the password AND ALL 3 TIMES I TRY A word PAST IT FROZEN. BTW, my mini HP serial number is CNU93954WV. He showed me a screen blank and it says enter the current password in the center of the screen.

    Please try-

    e9lofoqvd6

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the button white Thumbs Up on the right of say thank you*.

    Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

    Thank you

    GBL84

    I'm not an employee of HP

  • HP Mini 110 (XP) - no sound after reinstallation

    Hello! I have a problem after reinstalling my HP Mini 110 and would appreciatte any comment on that.

    I formatted the pc and installed a new version of XP Home edition (SP2).
    Everything went very smooth and all the drivers where installed (downloaded from the HP driver support site).

    Video, network, Intel Wifi chipset, Bios, everything works like a charm... expect for AUDIO.

    I installed the driver IDT, but at the start of the installation it says something in the sense of "your audio device is not supported by this installer" and stops.

    I tried with several different drivers (all from HP site) with no luck.

    Another thing that caught my attention, it's that there is no audio device in the "material management" tab of the system... No sound card is detected! It seems really weird to me...

    What could be the problem? Clues? I must point out that the format of the sound card worked perfectly.

    My computer is a HP Mini 110 (LA 1020).

    $ 1 million for any feedback thanks!

    Ale_Argentina.

    Well Finally I solved it. !!

    The thing is simple... As soon as I installed SP3, the material was detected and drivers accepted without problem.

    Storms XP SP2 will NOT work with the IDT audio device. Just updated to SP3 and immediately the sound card started working.

    Thank you Paul for your entry in the last few posts.

    See you soon!

    Ale_Argentina

  • HP Compaq mini 110 c-1010ER: Connector for SIM card in the laptop

    My friend gave me a Compaq mini 110 c-1010ER. Looking at, I found the connector for the SIM card. I inserted the SIM card, but the system does not detect. Please help to run it.

    I tried, but on Windows 8.1. I install Windows XP and try it.

  • Compaq Mini 110: Polarity of power supply jack

    Hello

    I have a HP/Compaq Mini 110 that was given to me because both the battery and the AC adapter was lost. I have a power supply of the correct voltage (19 VDC) and can get an outlet of the right size. I need to know what the polarity of the plug must be, for example, is the center of the end positive or negative? I also need to know if the computer will be also powered if one battery (even dead) is not installed. If it will power-up with the polarity a/c adapter, I'm going to buy a battery, otherwise I don't lose money. Shame on HP/Compaq to not show a pictorial of polarity on the camera body. If I can get going, have enough moxie upgrade to Windows 10? Thank you.

    Here is the Service Manual:

    Manual

    See p. 54 on the hard drive. She straight plug the motherboard, but it shows a cart or make sledding which does not move there and the SSD is welded to a SATA connector. For some time I took one of these apart.

    He's a regular SATA and the size limit, it's what is on the market, not the hardware, so you could theoretically install a 2 TB or a 2.5 inch SATA SSD. You could probably get one inch 80 gig SATA SSD 2.5 for a pittance and it would run as well as he is capable of running.

    The memory you have is DDR2-800, but the system he clocks up to speed DDR2-533.

    The power Jack is soldered to the motherboard and there is no way I know to stretch upward. A lot of youtube videos on the welding on a new jack and you can find the plug for a few dollars. It is not a work that I do, but I saw several times and I think you can probably manage it if you have the soldering equipment.

    If this has answered your questions please make it easier for others to find by marking "accept as a Solution.

  • HP mini 110 computer: enter the current password

    Hello! I have a problem with my computer hp mini 110. It asks me to enter the current password and I entered all the possible passwords that I could remember... The p/n is:-VA714UA #ABA. Model number: HP mini 110-1030NR. What should I do?

  • HP mini 110 OS re - install

    I have a HP netbook mini 110. He lost his Windows XP, even if the HP operating system works. I hope that I can download the full HP and Windows operating systems.

    The following URL is a link to download the ISO Windows Home Starter.

    http://getintopc.com/wp-content/uploads/2013/07/new-download-button.PNG

  • HP MINI 110-100: video does not

    I have a problem when I play a video. The video isn't smooth, and sometimes it's stagnant causes the audio and video is not sync.

    Event, I made the video with Sony Vegas Pro 11, take the time 4 - 6 hours for video rendering just 5-6 minutes.

    I am using laptop HP Mini 110-1100, Windows 7 32-bit, processor 1.7 GHZ, 2 GB RAM.

    Hi @Jonsa,

    Thanks for the reply.

    Please check the graphics driver of your laptop for Windows 7 on the following link: http://support.hp.com/us-en/drivers/

    Or run the HP Support Assistant to update the driver.

    Let me know if updating the graphics driver helps.

    Best of all,

  • Re: enter the current password HP Mini 110

    The same problem. HP mini 110

    Help me

    cnu9376kqf

    Hello:

    Restart and try:

    e9lofxgs58

  • HP Compaq Mini 110 BIOS Password Reset

    I have a hp compaq mini 110

    She asks current password which I don't have

    the stop code is [redacted serial number by Moderator]

    Hello

    Enter: e9lofqfn9q (3rd character is a lowercase L)

    Kind regards

    DP - K

  • Enter computer hp mini 110 the current password

    Hello.
    İ have current enter password problem. My hp mini 110 111ost pc. Please help me. Thank you.

    Hello

    Enter: e9lov378xh (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP mini 110: cannot use my wifi as it currently disabled from Device Manager according to assistant Wifi

    My system is asking for me to insert an artheros wireless adapter and I installed all the drivers, but my WIFI isint working again and when I downloaded assistant wifi it shows that he is disabled from Device Manager that i have tried everything I could give.

    pls kindly help.

    Here is the my system informatiom

    HP Mini 110-1160SA PC

    Best regards.

    Hello:

    I think that you need this card driver wireless for your 110-1160sa.

    This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

    File name: sp44923.exe

  • HP mini 110-1116nr: hp mini 110 system

    A co-worker of mine asked if I would be able to upgrade their hard drive and ram in their HP Mini 110... so, I did.  After the installation of the new (is increased from 1 GB of ram, 2 GB of ram... went from 160 GB hard drive on a hard disk of 500 GB)... turned on the laptop and it read: fatal system error code: CNU93908KQ

    Also: I read all the forums that have been posted so far... and everyone tried... nothing worked.

    Also: Tried to reinstall the old hard drive and the ram... but ALWAYS the same fatal error.

    Does anyone have an idea?

    Thank you

    @bdug

    Enter: e9lofo1us5 (3rd character is a lowercase L)

    Kind regards

    DP - K

Maybe you are looking for

  • P50 boot Workstation Dock problems

    I have a P50 with i7-6820, M2000M, 16GB. If I have the laptop docked and boot restart or cold it won't start, fans throw high and the screen remains black. I can turn off or unplug the monitors when it's like this and it's not helping, the caps lock

  • Data acquisition tool NOR-DAQmx with Matlab R2012a

    Hello I'm trying to control NI USB-6211 of Matlab 2012 using NOR-DAQmx Data Acquisition tool: http://zone.NI.com/DevZone/CDA/tut/p/ID/3005 I'm working on win7 64 bit. And I see the device AND Measurement & Automation Explorer. The tool does not work:

  • acquisition video framerate

    Hello I tried to acquire images from a camera to 30 frames per second for the time-sensitive image processing. Currently I have a while loop with grab imaq acquire wired to imaq avi writing framework. The calendar of the loop is controlled by a wait

  • HP 15-do2onr: disc no. 8.1 Windows included in the package and no product key

    I just bought my HP 15-d020nr 15.6-inch Touchsmart laptop a few days ago. Windows Update has been downloaded a ton of updates in this regard. Now, all of a sudden, tonight I discovered that after these updates are underway since it made my Windows 8.

  • Cannot assign a static Ip

    Hello whenever I try to assign a static IP to one of my computers it dosent work... the problem is I have a PCI Wireless and every time I put all the information and he said his works very well but it dosent recive packages and I cannot get Internet