Mini H710 PERC and PowerEdge M620

Similar Questions

• Mini H710P PERC in a server r.620 - updated the bios

  I tried to update the bios in the PERC H710P mini that came with a server r.620 (the boot in the bios of the RAID, the map itself ranked H710P mini card).

  However, none of the available updates would be charge - every the map does not exist.  I used installs it back based, since it is a VMWare host.  Three updates, I've tried have been

  Monolithic mini H710, H710P, and H710P of blade.

  Any ideas?  I didn't want to force an update with the control-no option.

  H710P

  Hello

  I don't know why she does not appear on the download page. I checked several pages to download the product as it should be, and it is not present anywhere. The package is properly formatted, so I suspect it's a timing problem of a certain type with the site. There is a newer version of the firmware that is pending release and will get I hope that Web site to get new data.

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=6P6KN&FILEID=3375018948&osCode=WS8R2&ProductCode=PowerEdge-R720&LanguageCode=en&CategoryID=SF

  You must be the FW 21.0.1 - 0083 or later to apply this update to the firmware.

  Thank you

• I have a mini ipad 2 and I fight a smart box and it is not turning off the ipad.

  I have a mini ipad 2 and I fight a smart box and it is not turning off the ipad.

  Go to settings > general, and then turn on lock/unlock.

• I have a HP mini 110-3130 and locked the touchpad.

  I have a HP mini 110-3130 and locked the touchpad. A small icon with a line through it. Once this icon fades the touchpad mouse stops working.  Suggestions for addressing anomaly welcomed.  There is no light or switch around the touchpad unlike some models

  Hello

  Try double-clicking top left corner of the touchpad - is often the method to turn the touchpad on or off.

  Kind regards

  DP - K

• can someone give me links to download only setup.exe and autorun.exe to the tribes of heroes 5 of the game is that mine are corrupted and I can't download the whole game again?

  can someone give me links to download only setup.exe and autorun.exe to the tribes of heroes 5 of the game is that mine are corrupted and I can't download the whole game again?

  This is the incorrect forum for your question.

  Try using Bing or Google, like this

  http://www.bing.com/search?q=Heroes+5+tribes+of+the+East&form=OSDSRC

• Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat No 4 GB

  Any REFLEX Cannon is 29 min video stop and don't work with cards sdxc fornat Exfat no limit 4 GB?

  For the VIDEO?

  Thank you

  Almost all of the Canon 'Vixia' line of cams are less than 1 k $. The Vixia HF G30 $1150 and it is the only model over $1 k.  Here are all the models to consumer prices.  (X XAnn, XFnnn, & XCnn series is top of the line, and of course the EOS film bodies are much more expensive.)

  As far as I know, they all supports SDXC cards.

• Aggregation of links between poerconnect 5324 and poweredge with broadcom adapter

  I am looking for information on how to build an aggregation of links between my powerconnect and three cards broadcom on my server. I want to create a bandwidth of 3 GB.

  I created a team with suite ABEC 3.

  My network have 2 VLANS.

  At this stage, I could ping my server network, and I can ping the server in my network.

  When I defined the three ports of the switch (where three cards are connect) as LASG and I defined in belonging to a VLAN these three ports whose status is F, I ping the server from the network, but I can't ping the server network.

  Could someone tell me how I could build this bandwidth betwween my powerconnect, and poweredge?

  Thanks a lot for your help.

  
  

• When I work on my sys after every 15 min to 20 min my mouse and keyboard does not work

  Hi all
  Please can someone give me a good answer

  When I'm working on my sys after every 15 min to 20 min, my mouse and keyboard work not and totslly my sys cling...

  Hi Suresh,

  Thanks for posting your query in Microsoft Community.

  According to the description of the problem, it seems your keyboard and mouse stops working, and also Windows 7 crashes.

  I will certainly help you in this matter.

  1. What is the brand and model of your computer, the keyboard and the mouse?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update the drivers for the keyboard and mouse.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Follow the steps in the link.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• When I open a saved PDF file it stalls.   After 10 min, I close and try again the same result.

  When I open a PDF - registered Adobe Reader (not answer) and it it stalls stalls.   After 10 min, I close and try again the same result.  Sometimes it works for a few minutes, then it will start in neutral and I get nothing fact.

  What is your operating system?  Version of player?

  Can you open Reader by itself?

• H710 PERC (PowerEdge R820) firmware update

  Hello world

  I have a new server PowerEdge R820 and I'm not able to update the firmware of PERC H710 (21.1.0 - 0007, A03) to the latest version 21.2.0 - 0007, A04.

  I tried with a key USB bootable with the files BACK to the inside, but just update software says no: "no controller detected."

  The server is online since 2 weeks now, so there is no current RAID rebuild and I tried also with PERC H810 firmware, no luck.

  Any advice? Thank you

  Daniele

  If the system has access to the internet, reboot the system, press F10 when you are prompted to enter in the life cycle of the controller, then once its there, select Firmware update, exit FTP selected server and proceed from there, its quite intuitive. One of the choices will be updated the H710 controller.

• Upgrade H310 mini to mini H710/P

  I use a RAID1 and a mini volume RAID 5 on r.620 with PERC H310.

  However, due to performance issues, I would like to upgrade path my mini H310 H710 or H710P.

  Is it possible to do without any reconfiguration and data wipe?

  Yes, the H710 supports the migration of virtual disks H310.

• PowerEdge M620 AHCI

  Hi, I would like to use AHCI for a specific m620 blade, but I have select ahci BIOS and disable the integrated controller (h310) readers are not detected by the server.

  Is there another part that goes into the Groove of raid to have ahci?
  I couldn't find another thing but H310 H710 H710P so I wonder how is SATA AHCI possible?

  Hello

  You can not display using the chipset SATA controller allowing him everything simply. If you were previously using a H310 then the bottom of basket is connected to the H310. Backplane must be connected to the connector on the motherboard for the chipset controller see the SAS/SATA drives.

  In addition, the chipset supports SATA. SAS drives will not work if SAS backplane is connected to the system board. We have a background of SATA basket for the configuration that you try. If your system was ordered with a PERC, there from the SAS backplane. SAS is backward compatible with SATA, so I don't see a reason why backplane SAS would not work. It is not a supported configuration of.

  Thank you

• Impossible to reconfigure RAID5, expand VD size option grayed out on mini H710

  H710 mini installed on a server R320.

  3 Sata drives in a RAID5, 1 VD group

  1 Sata Drive not configured

  All readers of the same make and model,

  I try to add the 4th disk and expand the VD, but the size option to expand VD is grayed out.

  Installing OMSA is not an option on the server.

  What I'm missing here?

  Thanks for the reply, but it looks like I'm the problem ;)

  It actually is a 2 step process to get this working.

  1 - Setup (f2)--> device--> management--> management VD h710 settings--> reconfigure VD--> selected Raid 5--> Select new drive--> click on apply.

  then, the screen returns to the previous menu

  2. ensure that Raid 5 is still selected, click on apply again

  voila...

• PowerEdge 1900 and Poweredge 840 and NO hardware RAID SATA HD, FreeNAS with ZFS

  I searched these forums and the web in general a concise my questions answer, but nothing is done.  I just happen to find someone who is using 'old' technology and it retarget as much as you might think (I am a broke student by the way).

  I bought a Poweredge 1900 Server & server Poweredge 840 ebay about last year.  I've been busy and have yet to work with these two units.  I wanted to use the PE 1900 as a file server and then push a backup of these files on the server off site, the PE840.  I intended to buy four 1 TB or four disks SATA 2 to (WD Black or RED WD) for each system, respectively.

  I've been through a few videos on youtube the other day and discovered FreeNAS.  This seems to be a much better solution than the use of Ubuntu Server, but it also made me think about the hardware Raid with these systems.  If FreeNAS uses ZFS (software raid controller), you want to avoid a hardware raid controller.

  My current assumptions, please correct me if I'm wrong on any of the following:

  I think that each of these systems to support drives up to 2 TB?, I think that I can use the SATA drives and not SAS, four discs in each system drives.

  I believe that I can boot from USB flash drive (a quick, which I intend to install FreeNAS on which they recommend)

  I think I can connect readers to the Perc/Raid Controller controller (& just turn 'off' RAID), or simply directly on the motherboard.  (What woud be the advantages/disadvantages of the use of the card or simply by using the Council)

  I intend on working with what I have right now (cheap and available), then once I get this configuration work that I take it out of the sand/lab sandbox, upgrade the processors and ram up my budget will allow and go live with the installation program (if it is still possible)

  From now on, they are sitting in a corner, begging to consume energy, and fans of polute the soundscape with their cries (PE1900 precisely).  I know that I could pursue other options but I already these two units.

  I really want to utilze FreeNAS its serving capacity file and ZFS for its reliability.  Is it possible with this camera?, or should I junk them and move on?

  Thank you for your answer!

  I've done some research more and since FreeNAS is built off of FreeBSD supported hardware is the same.  I couldn't find a list for FreeNAS specifically so I looked to FreeBSD.  I was still confused about the material and decided to go forward with the poweredge 840, for two reaasons, there already 8 GB of ram and it is not as heavy to move on (from 1900). I shoot the raid controller (for simplicity) and I plugged in three 250 GB SATA drives and a 40 GB SSD.  I had to set the bios for the usb key is recognized and also due to adapt to be considered as a hard drive, then had to define the sequence of boot to the usb drive, acting as a hard drive.  Once all that has been said and done, I wrote my FreeNAS image on my USB and booted up.

  It took maybe 10 minutes and I was up and running (once I had configured the hardware and bios), I created a RaidZ (as proposed FreeNAS) and with my three 250 GB drives, it produced 453 GB of usable disk space.  The 40 GB SSD is used as L2ARC (from my cache of understanding), I tried the installer with and without the 40 GB SSD.  The difference was impressive, just opening the photos or streaming video on my laptop Win 8.1 (Dell 17r) is almost flawless, as if the files were stored locally.

  I was impressed by how quick and easy to use FreeNAS, simple and fast network shares can be configured with permissions that works quite simply not in less than 5 minutes.  I don't have Windows Server down, but generally configuration active directory takes a little more effort.

  I am satisfied for the moment and continues to experiment with the Poweredge 840 until I commit to a processor upgrade.  Once I acquire 16 GB memory for my Poweredge 1900 I will perform with her, as it has only 1 GB now, crazy.

  Thank you for your help.

• How can I check my Mac mini for spyware and other viruses

  How can I check my Mac mini for software spyware and other forms of virus? Recently, I received an electronic invoice which seems to come from Apple on a purchase that I did not. Unfortunately, I answered by clicking on a link that asked me to cancel or manage this purchase that led me to a site that didn't look like an official Apple site. I am afraid that simply by doing so, I welcomed the spyware on my Mac mini hard drive.

  My Mac was purchased in 2011 and runs on OS X El Capitan (version 10.11.6).

  Kind regards

  Politkovskaya

  Receive a fraudulent e-mail for a purchase confirmation, you did not is a very common scam. Remember that you are not misled by providing personal information solicited by this e-mail.

  Unfortunately, I answered by clicking on a link that asked me to cancel or manage this purchase that led me to a site that didn't look like an official Apple site. I am afraid that simply by doing so, I welcomed the spyware on my Mac mini hard drive.

  No harm will come of the fact that you wrote. Fraudulent Web sites that are made to appear as legitimate those who are specially designed to convince you to reveal personal information. If you don't have that, no further action is necessary or justified. Do not install anything, no matter the source or the apparent popularity, in response to one such scam. To do this would be the first step in a path well worn to the misery.

  On the other hand, if you were tricked into providing personal information (like your Apple ID and password) you will need to change your password on Apple ID. Please write back for instructions.