Similar Questions

• How to open the manual mini port for vpn connection in win7?

  How to open the manual mini port for vpn connection in win7?

  Hi Andrew,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• El Capitan 10.11.3 update killed the Ethernet on my 2012 Mini port

  As the title says, I installed the update for 10.11.3 on my Mac Mini end of 2012, and after that I restarted, the Ethernet port no longer works. It worked fine up until the reboot (i.e., I downloaded the update itself through my Ethernet port). Wireless still works, but I really need a wired connection on this machine.

  Don't know if this helps, but the Ethernet port will still appear in the tab "Network" report of the system, but not in the drop-down list in network utility. I tried all the usual stuff - reboot, the evolution of the switch ports, change the cables, but nothing works. (I know that the switch itself is fine, because no other connected computers have problems.)

  Any ideas? I really don't want to have to buy an adapter Thunderbolt to Ethernet, but I really can't with a Wi - Fi only for this machine. All the tips are greatly appreciated. Thank you!

  Try this:

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Repair the hard drive and permissions - El Capitan

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Now, download and reinstall OS X El Capitan 10.11.3 Combo Update.

• CISCO RV180 - filter on Port WAN MAC

  Hello!

  I have configured the VPN tunnel between the main and remote desktop by using two routers RV180. I also created some additional users so personal is not in one of above mentioned offices can use the VPN from their Windows or Linux laptops and connect to the corporate network. Everything is defined.

  Miss me only now an option to connect to mobile devices like the iPhone or iPad so that they can connect and discovers the company web server internal too. Other devices with MAC addresses that are not those don't connect using their software operating system by default, so I had an idea to pass through the router port 443 to the internal web server, but somehow her filter by MAC addresses, i.e. If a person with a certain MAC address connects to WAN it gets transmitted , gets denied. Is this possible with our RV180 router?

  Slava,

  It is not possible to filter by MAC address. You can filter by IP address by creating an access rule, but you must know the IP WAN address that users will connect. Are they all in the same place and it has a WAN IP address, it would work well.

  -Marty

• RV325: Port WAN 1 connected (inactive)

  I bought a router VPN/Firewall Cisco RV325 Gigabit Dual WAN a month or two ago I try to connect to an OTN Verizon FIOS box. For those who are not familiar with Verizon FIOS, ONTARIO (Optical Network Terminal) box is used with Verizon FIOS to convert optical signals into ip packets: basically fiber in-> IPV4/V6 packets out. I had connected it to an Apple Airport Extreme for about 3 months without problem. Recently, I bought the Dual WAN Gigabit VPN/Firewall Cisco RV325 router so I could move the Apple Airport Extreme on the floor.

  I plugged the ethernet cable out of the box of Verizon HAVE in the WAN1 (port 15) of the VPN/Firewall Cisco RV325 Gigabit Dual WAN router. When I click on the menu option 'System State' in the navigation on the left to the RV325, I see connected in green and (Inactive) in red for 1 WAN Port with 0.0.0.0 as the WAN IP address. I tried to disable the port WAN2, allowing the DMZ by deleting configurations VLAN without result. I also upgraded to the latest firmware, deactivation of NSD (Network Service detection) and by increasing the intervals for NSD does not.

  Are there additional parameters that I need to activate/change in order to bring the WAN1 port in service on the VPN/Firewall Cisco RV325 Gigabit Dual WAN router?

  Thanks in advance for your help,

  -Justin

  Have you did match the existing configuration of WAN (PPPoE, DHCP, IP static, whatever)?

• Can I use the Thunderbolt on my Mac Mini port to connect external studio monitor speakers?

  I have a set of technical Pro monitor speakers that use Bluetooth to connect to the Mac.  However, I don't like the way they sound on Bluetooth, and I prefer not to use the headphone jack to hang them either.  Is there a a way to connect them using the Thunderbolt ports or USB ports?

  http://www.TPRO.com/collections/monitor-speaker/products/powered-Bluetooth-USB-s tudio-monitors-mb6000

  Here is a USB audio

  http://www.Amazon.com/GP/product/B001MSS6CS?PSC=1 & Redirect = true & ref_ = oh_aui_deta ilpage_o02_s00

  There are the dock thunderbolt which have audio connections as well as other ports too:

  http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/

• Driver Miniport WAN ikev2

  I looked at the other posts, but I can't seem to find what I wan't.

  I have a Japanese stationary (Desktop) that I bought and me personalized.

  I had a Windows 7 Home Premium 64-bit Service Pack 1 as a Christmas gift.  When I installed the windows I had no internet and after it has been installed the internet did not work. The Solver problem that I had to update my driver but without the internet, it is impossible to update on the same computer. I need to transfer the driver from my laptop to my desktop computer through a USB to get the driver but I can't find him. Help me find the correct driver please.

  I googled on my laptop on how to fix and I looked up the name of the driver on my desk and I google the name of the driver, but it doesn't seem to be everywhere.

  Is it possible that the driver is outdated and is no longer accessible for free?

  I have to pay for a program to fix?

  You have the driver for me?

  The game to the top of my desk.

  Processor: AMD Athlon (TM) II X 2 220 processor 2.80 GHz

  10 GB installed memory

  System type: 64-bit operating system

  Computer: ACPI x 64 PC-based

  Network card: miniport network extended WAN

  It is a fujitsu computer

  If you need more details, I'll send them but I hope this will be enough to solve my problem.

  All I wan't is the driver.

  I solved it by contacting my Japanese friend. Thanks anyway for trying.

• Lrt224 direct traffic through ports wan by device

  Hi, is it possible to have all traffic via wan1, but devices that I select (by Mac address or otherwise) go to wan2

  Hi AppleBhoy,

  You can use binding protocol to achieve this.

  1 create a rule (all traffice/all ip) binding to wan1.

  2 create rules (all traffice devices / your ip) binding to wan2.

  Please be reminded of the priority of the rules.

• Aspire VN7 - 591G which of the following is my wifi card?

  I have an Acer VN7 - 591 G-77FH. I wonder which of the following is my card of fi wi so the update, because I can not connect pc via wi fi

  

  In addition, what are the Mini Port WAN?

  The good driver wireless Acer VN7 - 591 G-77FH is:

  (NFA344) wireless LAN driver

• The WAN Port is communicating with the Ethernet switch?

  I have a Comcast gateway that the router is disabled in so it acts only as a modem. This is related to an Airport Extreme, which serves as my router via the WAN on the AE port. I created a different WAP with a Capsule temporal from the airport, located downstairs with an Ethernet cable from one of the Ethernet ports on the AE to the WAN on the TC port. I think it's what we call a 'roaming network.

  My question is, can I connect my switch Gigabit 8 ports in one of the Ethernet ports on the TC to complete connections wired to all devices connected on it, or should I first connect EI to the switch 8 ports and then connect the switch to the port WAN TC to complete my network "roaming"? In other words, plug it into the port WAN AE or TC still allows you to use other Ethernet ports as a switch?

  Thank you!

  can I plug my Gigabit 8 ports switch in one of the ports Ethernet on the TC to complete wired connections to all devices connected on it

  Yes, assuming that the TC has been configured to run in Bridge Mode, which would be normal.

  or should I first connect EI to the switch 8 ports and then connect the switch to the TC WAN port to complete my network "roaming"?

  It would be considered preferable to wiring, if it is convenient to do so.  For example, in the configuration of the wiring in the previous example just above... If there is a problem with the time Capsule, then all devices connected to the switch to the time Capsule would have a problem as well.

  If the switch is connected to the AirPort Extreme, and the TC is then connected to the switch... If the TC has a problem, the other devices connected to the switch of will not be affected.

• EA6500 manually select the speed and duplex to WAN port

  Is it possible (settings hidden?) to manually set speed or duplex in port WAN EA6500? I use EA6500 with Genexis HRG1044 (FTTH) and the latter has known issues with the download speed when local is connected to gigabit. It seems that the EA6500 and the HRG1044 Genexis do support auto-negotiation and who always results in gigabit which translates the poor in upload on the internet. Switch from 100 Mbps between EA6500 and Genexis HRG1044 does the trick, but I was wondering if it can be done without it. BTW, my internet speed is only 100 / 100 Mbit/s in any case.

  You can't adjust the WAN speed on the EA6500 with the Linksys firmware. The only solution is to put a switch 10/100 between the modem and the router.

• RV Support VLAN Tagging on WAN Port?

  Hello

  I would like to know if RV Series Router can support VLAN tagging on the port WAN himself? I need this cause my ISP using these methods to connect to the router/modem to the end user.

  Thank you.

  -----

  Kind regards

  Danny

  Please visit RV315W.

• With WAN Miniport problem when you configure the VPN in Windows 7 server

  I tried to make my computer a VPN server by establishing a "new incoming connection" under connections in the network and sharing Center. Originally, she she started but showed no WAN Miniport connections. I could not connect to this VPN with my other computer.

  What I've done so far:

  • I have 'upgrade' all WAN Miniports in 'MAC Bridge miniport driver' Device Manager (since I couldn't uninstall them as they were) and then uninstall all WAN miniports. I restarted my computer and then I tried the device drivers to install automatically, but only a few installed successfully.
  • Then, I downloaded the latest WDK (8.1) and tried to reinstall all Miniports WAN via devcon.exe with the command "devcon.exe install c:\windows\inf\netrasa.inf MS_PptpMiniport. He says that the node has been created, but it could not install the drivers. I restarted my computer, but some of these minis ports appeared as 'Unknown' in Device Manager, while others appeared with their names but with numbers attached because I tried a few times, Ex: "Miniport network EXTENDED (IP) #3".»

  from my understanding, I need at least WAN Miniport pptp to work for VPN to work. I don't know what to do at this point. Any help is greatly appreciated. Thanks in advance.

  Gateway DX4822-01 desktop PC

  Windows 7 64-bit, SP1

  Hello Jdrumr,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• Port of question - no video - DVI double separator i7-HDMI > DVI

  What I'm missing here?

  I have an i7 2.3 g-Mini late2012.  10.8.5. in a studio where I fed a dual display

  using a separator of video signals by - everything first, Tripp Lite, now an Aluratek - DVI 2-port video splitter (powered

  units).

  Followed by all the good order in start-up, the device worked for maybe a week and a half.

  Walked away and returned after maybe 48 hours either from Friday to Monday.  Computer is running

  "sleep" mode... The attempt, no signal wake video monitor not recognized.  Powerd deactivation/activation, no change.

  Reset PRAM and disconnected/reconnected Mini power after 30 seconds... tried reconnect splitter/monitors...

  sequence... still no resolution of the video signal to not watch.  Indicators on the splitter show the signal of the i7.

  and connectivity to the monitors.  I excluded this device that the fault.

  Am following the process mfgr correct insofar as the separator like so new out-of-box in reconnecting

  power on it - getting nothing.  Strange thing is, I had the same problem with the Tripp Lite - that's why I

  bought this Aluratek separator to replace.  Now, same problem.

  When connected to same monitors, this worked fine right out of the box.

  Now the same problem as the other separator.  Changed two different HDMI > DVI

  cables. All cables. No change.

  Either monitors directly linking ON the HDMI Mini port - display works fine.

  Tried the MiniDisplay port to the separator. didn't work...

  Which may conflict in operating system - something making these monitors sleep, something system-wise

  who is disrupting this process?  Even pulled all other connections (external USB port stuff) and it

  did not solve.

  It is also a coincidence for two separators to fail with this same issue - seems to indicate something with the

  Mac. In the meantime, no double posting until I can understand it.

  Any help greatly appreciated-

  Thank you

  Mike

  I suspect the power adapter... and maybe check for a loop of mass too.