Minimize the VMware session at MAC 4.1 Fusion bar

Similar Questions

• does not load the pages of the last session - 2015 Mac Book pro

  Hello

  You just bought a new Mac Book Pro 13. Safari and Chrome using for navigation. My user account is admin and in both browsers the classified are marked 'open the pages of last session', but it does not work.

  need help.

  Thank you

  In your Safari menu bar, click history > reopen all windows from last Session.

  For Chrome see the called extension, "Session Buddy" > https://chrome.google.com/webstore/detail/session-buddy/edacconmaakjimmfgnblocbl bcdcpbko

• Installation of the VMWare Tools (XP/Mac) error

  Hello

  I had problems with the von VMWare Tools installation. Whenever I try to install it, I get the response attached to this email. I use the most recent Mac OS X and Windows (SP3) as well. Windows is the virtual machine.

  Any ideas?

  Thank you

  In the "Major known issues" section (near the bottom of the document) frequently asked Questions about VMware Fusion , take a look at «Fusion 2.0.2»

  In short you need to download the latest Version: 2.0.2 | 2009/02/11 | Build: 147997

• the hearing session sharing - PC to mac?

  Hello

  I just bought a new MacBook pro and I would like to share a session of filtration for the new mac

  is this possible?

  Best regards

  Martin

  The session file is compatible between the systems.  When some people have a problem is when their audio files on a shared network location, stored paths are represented differently on each platform.  The best way to solve this problem would be to choose file > export > Session on the PC and choose to make copies of all audio files.  This will create a directory with local copies of files that can be copied on the Mac.  If you want to use these network sources, you get an error when you open the file SESX on Mac and have the possibility of linking the clips of new files.  Browse to the network share and select the first file and the rest, if in the same directory, should be found automatically.

  Another potential conflict would be not specific to the platform of plugins you may have.  Hearing on PC supports VST as long as the support of Mac VST and Audio Units.

• Firefox opens the last session and tabs regardless of settings.

  For the last month or two, I had this problem as well as others. Kept getting a popup to set my search engine, I did several times without success. This question went. Tab question remains.

  No matter what setting I use open the previous session. I have Tab Mix Plus 0.4.1.8 so I've disabled that and checked the settings in FF to open to my Home Page. No good, don't always open the previous session.

  This was not a problem with Tab Mix Plus over the years that I used it. Exactly, I removed it from the Add - ons. Options of FF and together to start with the Home Page and restarted FF but always opens the previous session.

  Including a snapshot of the modules enabled.

  What is the cause?

  Olhank

  Your list of details of the system shows that you have a user.js file in the profile folder to initialize prefs each time you start Firefox.
  The user.js file will be present if you or a other software created this file and normally will not present.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Windows hides certain default file extensions.
  Among them .html and .txt, so you can see only a user file name without .ini and .js file extension.
  You can check the type of file (file extension) in the properties of the file via the context menu in Windows Explorer.

• Why Firefox always opens with the last session tabs?

  When I open firefox always opens with the last session tabs? How can I solve this problem?

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  The user.js file is present than if you or another software has created this file and normally it wouldn't be here.
  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Windows hides certain default file extensions.
  Among them are .html, .ini and .js, .txt, so you can see only file name without the file extension.
  You can see the type of actual file (file extension) in the properties of the file via the context menu in Windows Explorer.

• Where are stored the "last Sessions"? I'm changing from Win XP to Windows 7 Pro and want to save/access of previous Sessions.

  The question comes down to my needs. Where are stored the "last Sessions"? I backed up my drive "C", My Documents, my pictures, etc., so I should be OK with bookmarks. But, I would also like to be able to access previous sessions.

  The current session is stored in sessionstore.js file in the Firefox profile folder.
  There are also backups in the folder sessionstore-backups that you can copy the sessionstore.js file make Firefox to use this file.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Mozilla restores the pages of the last session, but I do not set and don't want

  When I open Mozilla firefox, it always restores the last session pages. I tried to restore default startpage, but he restores the other pages anyway.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

     http://kb.mozillazine.org/browser.sessionstore.resume_session_once
  

  You can use this button to go to the Firefox profile folder:

     Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
  

     http://kb.mozillazine.org/Profile_folder_-_Firefox
  

      hope it will sort out your problem
  

• 26 of Firefox does not load the home page. Instead, it loads the previous session (and that includes all tabs). It does not matter how Firefox is closed.

  26 of Firefox does not load the home page. Instead, it load the previous session, regardless of what has been entered in 'Options '. The browser runs in Win 7.0 64 bit; Norton Internet Suite 21 provides security features. There are some solutions 'cloud', also running as Google Drive, box, Skydrive and Cubby. The browser behaves in the same way in all my machines (installation and the OS is similar to that described above) and no amount of reset 'Options' seems to affect it. Nor is it affected by the way that Firefox is closed. This is obviously a bug that should be fixed.

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/about:config

• 7 - fusion '3D Acceleration requires an update of the VMware tools in the Virtual Machine'

  Hello

  I installed the free Fusion 7 trial this week on my iMac and subsequently installed Windows 8.

  The resolution of the screen under Windows is very low compared to the Mac OS.

  In addition, I have the warning message in the Windows display settings:

  '3D acceleration requires an update of the VMware tools in the Virtual Machine'

  I also note that the display driver in Windows is the display driver database with Microsoft.

  A few weeks ago I installed version 6 of Fusion and it worked very well.

  Any ideas?

  Thank you

  John.

  Take a look at the installation and the use of the VMware tools and more spicifically to manually install or upgrade VMware Tools in a Windows Virtual Machine.

  If by chance, VMware Fusion is not properly mounting image VMware Tools windows.iso file then you have to do it manually.  It is located in "/ Applications/VMware Fusion.app/Contents/Library/isoimages/windows.iso" and will have to be copied, not moved, in a location that is accessible out of the bundle of VMware Fusion.app as the office.  If you need to do this, you can right click on the bundle of VMware Fusion.app see the content of the selection box and access its location to copy.  To assign the windows.iso on the CD/DVD image, take a look at: Connect and Set Up a CD/DVD Drive

• Network cable unplugged, the Panel grey adapter after removal of Fusion to a new mac

  I can't "solve this problem.

  A couple of months, I moved to a new iMac (end 2013) and the network in Fusion stopped working.

  Windows (XP) says: "network cable unplugged".

  Merge network adapter control says it has allowed (part that my mac is turned on), but the Panel is disabled, grayed out.

  I tried to change to full NAT, but mothing changed.

  Since then I upgraded Fusion 6 an update of version minor and improved Fusion 7, but the problem is still there.

  In the knowledge base, I found something similar, called other products VMWare, who suggested that the problem might be in the configuration of the network of Mac, but I am not sure where; and, in any case, S.O. and configuration and even got on the older iMac, where everything worked fine.

  I'm quite often connected to a VNC using Tunnelblick, but I tried to turn it off and the problem is still there. (And even once, on the old Mac it worked great even through VNC).

  Any suggestion?
  

  S. *

  After asking the VMWare Support they suggested merge to uninstall and reinstall from scratch. It worked.

  Uninstall completely merger: http://kb.vmware.com/kb/1017838

• VMware Tools for Mac on EsXi 5.5

  I'm trying to install VMware Tools on a Mac on my 5.5 EsXi box.  I get the following error:

  VMWare Tools upgrade error

  Call 'VirtualMachine.MountToolsInstaller' for the 'host name' object on EsXi host failed.

  VIX 21003 = error code

  Anyone where I can download Vmware Tools for mac on an EsXi 5.5 box?  Perform a google search, I am led to this page to download VMware Tools:

  Index of /45848/tools/esx/5.0

  However, this site lists only on Windows and Linux.  I do not see any version of Vmware Tools Mac.

  Nevermind, I was able to get rid of the error message by removing my cd player.  Its strange that after mounting will cause this error.  Also its strange that there isn't any downloadable version online.  But no matter I got it solved.

• VMware Tools for Mac will not install bug.

  Hello I have a clean install of Mac OS x 10.9 I raise in a virtual machine but when I bring the VMware Tools installed, get an error:

  Cannot install VMware Tools on this disk.  VMware Tools requires Mac OS X 10.5 or higher.

  Screenshot attached.

  I've tried versions both 6.0.1 and 6.0.2 darwin.iso for VMware Fusion. but the same error.   I wonder what VMware is actually audit to determine the versions of operating system.   I have in the past summer success install the same software on the same computer, but I have tried to reinstall from scratch (more than once) and tried many changes of setting on both hosts and guests with no joy.   Anyone know how to fix?   

  Thank you.

  mapsurfer wrote: there was a facility of Mavericks I had done a ton of work on which to install VMware Tools, which makes me think there is some file touched along the way

  who was happy to install VMware tools...

  I'll tell you one last time...  When clean install OS X 10.9 Mavericks under VMware Fusion 6.0.2 VMware Tools are not automatically installed!

  In addition, it turns out that the "internal" or "removable" made no difference that I was able to move the vmdk from SATA, SCSI (appears inside the system) but that made no difference either but has been tested

  I have mentioned that the drive internal vs external because VMware Fusion before 6.0.2 has not created a good installer for OS X 10.9 Mavericks nor was it settled the case, and the fact that it was not properly installed may have been a contributing factor to the VMware Tools install problem not necessarily imply that the disk shows as external!

  I wonder if there is another way to install VMware Tools manually?  I can see the directory structure exposed within the darwin.iso but don't know if I can cp

  This straight out of the iso, but not being is not a Mac OSX expert... don't know if I can run alternate and no package installer idea what files are changed by install VMware Tools.

  Still confident enough, I can work around the issue of the installer.

  I just tested this on a clean build and with the help of pacifists opened the VMware Tools.pkg (Install VMware Tools.app/Contents/Resources/VMware Tools.pkg) in the bundle 'Install VMware Tools.app' on darwin.iso (VMware Tools for OS X) and "Selected files.pkg content" then clicked on install and check 'use administrator privileges '.  He basically just moved the files in places and then after that I restarted the computer virtual VMware Tools seem to work.  I tested VMware shared folders, copy & paste, drag & drop, and change the resolution of the screen... all seem to work fine, however it was simply intended as a test and not a recommended method to install VMware Tools and I don't know if it is essentially a complete installation.  I don't have the time now to analyze the two occurrences, one made appropriately and the other using pacifists to see if there is in fact no difference.

  I was also going to take the vmdk to another platform and see if any difference (doubt it will be)

  Any platform with not brand hardware Apple is a direct violation of the SLA products and may not be discussed in these forums!

• display of the results with a mac duplicate script

  I'm still pretty new to powershell scripts and have learned quite a bit from reading the code, others have implemented here on the forum and other items. Given that, I still have a lot to learn and I'm having a really frustrating issue with a small script, asked me to set up.

  The purpose of the script is to try to locate the duplicate MAC addresses separately for VM, host physical NIC, and VMKernal interfaces. First, it brings together all the MAC addresses for each and stores individually. It also combines each of them in a table, so that in this way it may list the duplicates they each individually, as well as duplicates between them as well. When I run the ps1 file into powercli, I get the partial results. The VMKernel box lists the mac address, but not the name of host or portgroup related. The combined results end up completely empty. If I paste the exact content of the ps1 file into powercli directly, it goes through correctly and displays all the required information that is not there when I run the script file, with the exception of the vmkernal host and name new portgroup. For some reason we won't not display information at all. I noticed that the amount of extra empty lines displayed in the combo box are as many lines of results that come through when I just paste the script in. So it's like we know it is data, but just can not visually display for some reason any and I honestly don't know enough to understand why. I guess its some sort of in the form of question, and I hope someone can tell me what I'm doing wrong.

  Is attached a copy of the script, and copy/paste between the powercli window runs the script and also simply paste the script into the window. Of course, my poor coding style makes it semi difficult to read when I just paste the contents of the script in powercli.

  Note: according to the vmworld session I attended with LucD as one of the hosts, I apoligize for killing puppies with my continued use of the write-host I have not had time to study alternatives and not me used them as well.

  I really appreciate any help that anyone can provide me with

  
  

  Great idea for a script.

  I think that your problem is with this line

  $combineddup = $combinedreport | Object-group Mac | where {$_.} {Group - gt 1}

  who should I be

  $combineddup = $combinedreport | Object-group Mac | where {$_.} {Group.Count - gt 1}

  I have attached a revised version of the script with a few other changes I would like to suggest. Take a look.

  Do not hesitate to ask if some of my proposed amendments are unclear.

  On puppies, you're excused for the first 10 scripts that you post in this community

• This virtual machine may have been moved or copied during the priming two different Macs from the external SSD drive

  I am using this SSD external boot drive to start two different iMacs at work and home, making all my stuff to update this SSD.

  However, when I open the virtual machine in Mac OS X Server 10.6.8 (Snow Leopard) on VMware Fusion on OS X 10.8.3 5.0.3 (Cougar) installed on startup such external SSD disk, VMware asks what follows by trying to open the virtual machine on the FIRST Mac:

  "This virtual machine may have been moved or copied. In addition, I saw:

  Q.) VMware tells me: "this virtual machine may have been moved or copied. What should I do?

  VulnHub - Frequently asked Questions

  Choose "I moved it", or "I copied it"?

  Is it possible to PREVENT VMware Fusion ASKING such question with each single switch to Mac (as said, I always start the two Macs at work and home from the same SSD drive)?

  Thank you.

  VirtualMac2009 wrote: WoodyZ, the "Mac OS X Server 10.6 64 - bit.vmx" has a lot of lines. I understand that I should just stick

  UUID.action = 'keep '.

  the last line and save. Right?

  The order of placement of the options in the .vmx configuration file are not relevant as long as each is on its own line.

  On the other hand, I hope than boot from SSD external drive to start two different Macs (one at work and one at home) will not break she like says dlhotka.

  The main issue will be the differences between the CPU and according to what difference, say a Core 2 Duo vs Quad Core this by itself may be sufficient to trigger WPA on a Windows Virtual Machine.   Like many a Client in Mac OS X or OS X Client that shouldn't be a problem however with Mac OS X Server or OS X Server so that I moved it with a Core 2 Duo vs Quad Core, I have not had problems yet but the haven of the exhaustive tests with the server version.  I think it will go well, however, we should always do... maintain appropriate backups!

  Post edited by: WoodyZ - point makes it dlhotka about snapshots is a very good and must be taken into account! ;)