Mise put buffer, triggered analog capture

Similar Questions

• First Pro CC is fragile? analog capture problems.

  I have CC PP on a 64-bit Windows 7 computer. Sufficient RAM, gpu inadequate. (Old nvidia quadro). I work in PS and LR for years and had a video project (marriage of the daughter). I need analog capture. I used a grass Valley converter plugged into Firewire. I installed CC PP. I ran it.

  Good news: the interface and the workflow look familiar and good.

  Bad news: when capturing, it closed upward. Task Manager-force reboot.

  Better news: I have disabled hardware acceleration. and capture worked. Some frames lost, a good no sound.

  Bad news: after the capture of 40 minutes in some clips. I clicked on the lower left corner to view the screenshots. PP then closed abruptly. I opened it and the clips have been shortened to two minutes each. I assumed that PP works with a record of work with memory and finally wrote a finished file.

  So far, I worked on the 'edge' of the PP with an older video card. Premiere Pro is fragile? I don't mind of error messages but the collapse suddenly a system and job loss is downright sad. I can invest time and money to get it going. but...

  I will turn off the acceleration of software and try again. I will walk away from the computer until it is made with no multitasking. Will it be enough?

  As far as I know, body continues to capture when the program loses the "focus" on the capture screen... then do NOTHING else

  http://helpx.Adobe.com/Premiere-Pro/KB/cant-capture-DV-HDV-video.html

  - and more info on Windows http://forums.adobe.com/message/4708997

  -Legacy driver http://www.studio1productions.com/Articles/Firewire-1.htm

  -All versions of Windows from 7 to 10 need legacy driver!

  I have NOT used, but many say to try this for the HDV capture

  -Archived at http://www.videohelp.com/tools/HDVSplit

  -Click the link 1 slot "download sites:" for the latest version

  I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/

  I used http://www.scenalyzer.com/ and it works well, but breaks capture pieces 4Gig

  -which was not a problem for me, since his arrival at the 4Gig on the timeline files works well

• Anyone know how to change a thumbnail of files (file not folder) and then put my own miniature captured (what I do) instead?

  Hiya everone, does anyone know how to change a thumbnail of files (no), then put me captured own thumbnail (which I do) instead? Paul

  Original title: thumbnails

  Hi Paul,.

  Thanks for choosing Microsoft Community Forums.

  According to the description, it seems you want to use the thumbnail image customized for other files.

  You can customize folder icon. But, you cannot customize file icon because if she changes a file's default settings, the file do not work.

  For reference:
  http://Windows.Microsoft.com/en-in/Windows7/change-thumbnail-size-and-file-details
  http://Windows.Microsoft.com/en-in/Windows7/folders-frequently-asked-questions

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Output TTL triggers analog input with PCI-6251

  Hello, I'm new to LabVIEW and have a question that I hope I can get a response on this forum.  I am currently using a PCI-6251 DAQ card with a block of connection BNC-2120.  I would like raise an event on an input, for example a sine wave, which is connected to AI0 analog.  Then I would send a TTL pulse train via the digital output.  What I'm describing can be better understood by the images of this link:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/3017

  In the tutorial page linked above, they do mention the card PCI-6251, but when I read the specs and compared, 6251 also has analog and digital Board, trigger functions, as well as digital I / Os... so I think he should be able to do what I want it to do.  Can anyone confirm this?  If anyone could help me by providing a VI that could do what I ask, just to help me get started, would be greatly appreciated.  Thank you!

  Hello!

  Please post on the Forums OR! My suggestion would be to use build it digital Pulse - Retriggerable.vi found in the Finder for example of OR. Open LabVIEW, go to help > find examples > input/output equipment > DAmx > generating digital pulses > generate digital Pulse-redeclenchables. Change the type of trigger for this departure vi > Analog edge and make the source one line APFI (pin 20 of your card is APFI0). This will generate a pulse based on an edge similar to a level that you specify.

  I hope this helps!

• Put Validations after the capture of oapagecontext.isLovEvent)

  Hello
  I need in iproc page restrict with error/warning message so that the plaintiff in the confirmation page should not be appover in the approval page
  I'm able to read the applicant Id confirmation page, I also expanded page standard Oracle ApprListCO (approval page - delimited table approval region in which add new appover/change to first approver button is there) so that I can compare with the value of applicant Id extracted from prev page (confirmation page) to the LOV value that we get after Add approver approver/change
  I m iteration VO for LOV attached to this page, but the new value that I entered is nothing coming.
  Here is the code used to retrieve value for LOV that i m call in oapagecontext.isLovEvent () in the form of courses demand. (Tried through 2 ways)
  ApprovalListAMImpl AproListAM = (ApprovalListAMImpl) oaapplicationmoduleA.findApplicationModule ("ApprovalListAM");
  ApprovalListVOImpl VO4 = (ApprovalListVOImpl) AproListAM.getApprovalListVO ();
  Row4 = (ApprovalListVORowImpl) VO4.getCurrentRow () ApprovalListVORowImpl;
  If (oapagecontext.isLoggingEnabled (1))
  oapagecontext.writeDiagnostics ("xxat.oracle.apps.icx.por.approval.webui.ApprListCO", "getEid::getRowCount =" + VO4.getRowCount (), 1);
  
  RowSetIterator selectIter = VO4.createRowSetIterator ("selectIter");
  
  int fetchdRowCnt = VO4.getRowCount ();
  
  If (fetchdRowCnt > 0)
  {
  
  selectIter.setRangeStart (0);
  selectIter.setRangeSize (fetchdRowCnt);
  
  for (int i = 0; i < fetchdRowCnt; i ++)
  {
  Row4 = (ApprovalListVORowImpl) selectIter.getRowAtRangeIndex (i);
  "" ApprId = Row4.getAttribute ("ApproverId") + "";
  If (oapagecontext.isLoggingEnabled (1))
  oapagecontext.writeDiagnostics ("xxat.oracle.apps.icx.por.approval.webui.ApprListCO", "found. Apprid is... "(+ ApprId, 1);"
  }
  
  }
  
  / * LOG: * for this case it prints everything first two column valuecorrectly IE already added approvers, but what I entered as always is null, why? **********/
  
  / * * Tent through different way * /.
  ApprovalListAMImpl AproListAMM = (ApprovalListAMImpl) oaapplicationmoduleA.findApplicationModule ("ApprovalListAM");
  ApprovalListVOImpl VO5 = (ApprovalListVOImpl) AproListAMM.getApprovalListVO ();
  Row5 = (ApprovalListVORowImpl) VO5.getCurrentRow () ApprovalListVORowImpl;
  
  String apprid = Row5.getApproverId ();
  String apprvnm = Row5.getApproverName ();
  
  If (oapagecontext.isLoggingEnabled (1))
  oapagecontext.writeDiagnostics ("xxat.oracle.apps.icx.por.approval.webui.ApprListCO", "not caching Apprid =" + apprid, 1);
  
  If (oapagecontext.isLoggingEnabled (1))
  oapagecontext.writeDiagnostics ("xxat.oracle.apps.icx.por.approval.webui.ApprListCO", "not caching apprvnm =" + apprvnm, 1);
  
  / * LOG: * in this case, it always giving a value already there first online * /.
  
  I m unable to capture new approver Id thru value form also.
  Please suggest how I can capture value LOV came after oapagecontext.isLovEvent () (that's when I tab out of LOV)
  Thank you
  Ashish

  Hello

  The code should be:

  Event names are "lovValidate" and "lovUpdate". Small 'l' IE. «lov... not «Lov...»»

  If ("lovValidate". Equals (oapagecontext. GetParameter (OAWebBeanConstants.EVENT_PARAM)). "lovUpdate".equals (oapagecontext.getParameter (OAWebBeanConstants.EVENT_PARAM))) ".
  {

  }

  Thank you
  Gerard

• Analog capture and edit with PPro CS4

  I got an old Sony TRV119 a few weeks ago at a yard sale.  It's an analog 8mm camera.  I intend to use it to transfer a box full of old 8mm tapes that I have in the 90's on DVD.  I have a Sony TRV30 or a Sony HDR - HC1 to use for analog-to-digital conversion, and then to my PC via IEEE 1394.  I'll make a montage with PPro CS4 and Encore CS4 allows to make the DVD.  I did it a couple of times before, but it has been a few years since the last time I did it and I barely remember how to connect to them.  The only thing I remember is that the Sony used for analog-to-digital conversion cannot have a tape inside to make it work.  I used the TRV30 for analog-to-digital conversion in the past.  If anyone can me clue or point me to a resource I would be very happy.  I think that similar to this discussion have been on this forum in the past, but I can find them.

  Thank you

  Dan

  TRV119

  Composite video and audio ports

  TRV30

  USB

  FireWire

  Audio/video ID - 2

  Headphone output port

  ID-2 video S

  LANC

  Microphone port

  HDR - HC1

  FireWire

  USB

  Component to

  A / V out

  Not sure if it will work, but you could hang the trv119 with a composite to the trv30 and the trv30 with firewire to the computer.

• Need for speed analog COTS of encoder Signal

  Hello all, need help for shopping.

  I have a client who wants to get an analog output at the level corresponding to the speed of rotation of a coder instead of the traditional measures of freq.  We want a stand-alone package which makes the measurement of the frequency on board and puts just an analog output scaling.

  Need< 100="" ms="" latency="" and="" ability="" to="" resolve="" 5="" rpm="" to="" 1000="" rpm.=""  just="" don't="" know="" where="" to="" go="" to="" buy="">

  Anyone know of such a device?

  Thank you

  Wes Ramm

  An example of many manufacturers of frequency to voltage converters:

  http://www.dataforth.com/functional.view.aspx?ptypeid=11

  Look at the detailed specifications to ensure that the input voltage range is compatible with the encoder as well as response time.

  -AK2DM

• Input analog frequency on DAQmx measurement

  I have an analog impulse (amplitude varies) connected to my USB-6212 DAQmx device.  I am looking for a way to measure the frequency of the signal.  So far, I have found no method DAQmx supported to achieve this.  I'm coding in LabVIEW and the only way I found to do this is by writing my own code for the analysis of signals amplitudes to determine the level of half-max to find fronts and edges in order to count the pulses to calculate the frequency.  Someone please tell me there is a better way.  I need help on this one guys.

  With an analog capture, you can try the function extract your unique information on the Signal Processing > range of measures of waveform. There are also Express your measures VI.

• InputStreams for HTTP [S] response data: confirm a minimum memory buffer/reading early?

  I need to manage data from a web service response. The format of the response data is under my control and is returned as a stream (net.rim.device.api.crypto.tls.TLSInputStream) to my BlackBerry application. The content of the feed is an XML stream that contains simple header information and then one or more 'chunks' of data. The data is compressed (gzip) and coded (Base64). BB app must decrypt, decompress, and then process the data in the stream. For the purposes of my application, I never need all of the data at a time; processing flow for real, that's what I'm looking for. I've implemented a pipe which, in pseudocode, looks like this:

  SecureConnection httpsConn; already implemented

  InputStream httpsStream = httpsConn.openInputStream ();

  InputStream compressedStream = new (Base64InputStream.decode (httpsStream));

  InputStream is = new GZIPInputStream (compressedStream);

  int aByte = is.read ();

  The goal is to put buffer in the bit data as possible so that the operation on the side of BB is not intensive memory as the data grows. The effective implementation of this pseudo code works very well.

  The question I have is: I can confirm that the httpsStream I have created from the httpsConn is completely not himself read the BB in the specific RIM code? In other words, if there are 20 MB of data in the stream, I don't want to know that the stream has read data HTTPS completely - 20 MB all - and then put at disposal. Instead, I want to know only as much data is consumed as I makes (is.read) as well as a small buffer, perhaps, for the effectiveness of the network. A third way to ask the question: I think that it is supposed to be the definition of a well implemented InputStream, but I'm having a hard time finding a definitive '' Yes, J2ME (or BB) InputStreams promise to read HTTPS data on request and not all at once.

  I expect tons of streaming audio and video apps are partial evidence that works real data on the fly on the Net.  Still, I left the details as XML processing by SAX - it's one on the behavior of the InputStream HTTP [S].  But it brings the fourth way to phrase my question: if I use SAX instead of a tool of DOM to treat my HTML because I want to monitor the pressures of large data flows, will I get cancelled by buffering I can't control in the low-level InputStream HTTP [S]?

  Before you say, ' HTTP [S] is not where you should make streaming ", this is not streaming in itself. It is instead one - possibly large - answer to a POST.  Highly 'typical' web interaction

  If changes in response based on the version of the OS, presumably 4.6 or better is the target platform.

  Thank you!

  -Del

  I don't remember the said documentation. All I remember is that I proposed of workaround to someone on this forum and they later confirmed that he has solved the problem of buffering (they were streaming audio as great answers HTTP - streaming started to work very well, without a lot of latency).

• How to activate IP accounting or capture packets in Cisco ASA 5510 (8.2)

  Hi all

  Please help me for activation

  IP accounting packets or capture in Cisco ASA 5510 (8.2).

  Thank you

  Solene

  Hi Eric,.

  Create a list of access with the source destination ip address and/or tcp/udp ports

  can use it

  CAP_NAME access-list ACL_NAME buffer 12345bytes INT_NAME capture interface

  You can check capture

  See the capture?

  Name Capture PASSWORD

  |     Output modifiers

  Take care

  PaulC

• Capture the moment don't reflect Timezone (Sony a6000)

  The time zone on my camera (Sony a6000) is set to PST (-08:00).  However, when I import my photos into Lightroom, the value of time to Capture for each photo is equivalent to GMT, for example if I take a photo at 11 am PST, the Capture time is 19:00.  The "creation time" for photography is always correct, and I can 'fix' the time of capture by running the operation of 'Change the file creation date' on the photo.  However, this is not ideal because I import photos into folders YYYY_MM_DD and the initial import (which uses the wrong Capture time) often puts the time of capture-based photography in the right folder incorrect.  Y at - it a good solution for this?

  [There are no doubt some to make case for switching all my camera zone time GMT, but I spend most of my time in PST and it is a much nicer term for importation.]  [In addition, my other main camera (my iPhone) has the same problem as described above, if there is an event where I take pictures with my Sony and my iPhone and then import them both, often photos of the event will be spread over two separate records of date because of the issue of the time of capture.]

  I use Lightroom 5.6 on Mac (El Capitan 10.11.3).

  Thank you!

  Jonathan

  How Lightroom determines 'capture time '?

  For metadata in general, LR meets the standard of the industry of the metadata working group.  For the date of capture, LR examines the metadata EXIF DateTimeOriginal field, that all digital cameras add photos. (There are various complications if this field is missing in the photo or there are XMP metadata stored in the photo).

• BetaCAM SP UVW-1800 Capture in Premiere Pro

  I'm on first Pro CC2015 on Windows 10 using Matrox MXO2 w/MAX with a BetaCAM SP (SONY UVW-1800), attached to the Matrox i/o device drivers Matrox WYSIWYG Windows 8.1 running...

  While it's not exactly as smooth as my VT5 NewTek SX - 8 BoB was several years ago, I have Premiere Pro operating as an analog capture via my Matrox MXO2 device. AWESOME! Thank you Adobe, Matrox and Microsoft. I have a huge amount of exceptional images recorded on cassettes BetaCAM SP and I am now able to ingest footage in Premiere Pro for my G-Tech G-SPEED are 8 TB high performance eSATA RAID Storage for SD/HD Production.

  PS - It would be great if Premiere Elements can supports an e/s of consumer device, as my father has 100s of VHS tapes that he would like to play with.

  Takes to elements first scanning tapes using a 'consumer'... and it has a forum at http://forums.adobe.com/community/premiere_elements/content for you the father to ask questions

  Connect your VCR to the http://www.amazon.com/Grass-Valley-Canopus-77010150100-Converter/dp/B00030ATTO device and the device to your Firewire port

  NOTE - first Elements 13 version no longer works with Firewire, but having your father ask in this forum on the other (free!) software to capture video sound

• Two triggers to do different things in the same place

  I was wondering if I could put two triggers in the same place and ask them to do different things. I wanted to have something happen when I click on the image and something different happen when I hover over the image.

  Is this possible?

  Thanks for your help!

  Of course, it's possible, but it didn't exactly have much to do with Muse. You need to change the underlying jQuery widgets more than anything else.

  Mylenium

• stream capture required checkpoint YVERT do not go forward

  Oracle DB version: 10.2.0.5
  
  Configure the replication of unidirectional flow of a schema. The stream runs fine and the start SCN and required checkpoint YVERT were moving forward. I put in retention of capture to 3 days. But, the required checkpoint SCN, start YVERT and fist of SNA does not last four days progress. The flow of capture and apply works perfectly and she asked all of the latest recordings.
  
  But, if the flow is given for all cases, capture can get the old archivelogs since the required checkpoint SCN does not advance. What is a possible reason for him and how to solve? Could someone explain please?

  Leave it alone and wait. Every 6 hours (last time I tested), you'll see alert "first SNA has changed."

• Bug in the Edit Capture time function?

  I have problems with the feature 'Edit Capture time' in LR3. I'm curious to know if others have a similar experience and you have a few suggestions.

  I have lots of old jpg files that have been scanned and stored on my computer over the years. The actual creation date is not correct on most of them. As I was their import in LR3, I tried to change the date and I've been to unexpected behavior when trying to resolve several images at the same time. What I noticed is that LR3 will correctly assign the new time of capture on some images. The rest, he attributes a time completely random capture that could be earlier or later than what I selected years. I have to repeat the process several times on the images with the wrong date before ultimately bringing all to have time to capture that I want.

  To clarify what I mean by several images, I would say that it could be as little as 2, and other times, it's as much as 100 + images. I use the stamp of time in my naming convention for my file names are unique, so I like it to be as accurate as I can get it for stuff I shot with film. I'm running the 64 bit version of LR3 with the latest updates on a computer that is running the 64 bit version of Windows 7. I have 8 GB of memory in my machine. More than enough free disk space. Does anyone have ideas on this?

  Another thing that I will mention, that may just be me not understanding how the feature is supposed to work. I put a time to capture the 25/05/2000 12:00:00 AM for 33 images. After several attempts to get all 33 of them to make the change, I have them sorted by capture time and noticed that after 10 images from the time of 12:00 to 12:00:01. Then it changed to 12:00:02 after another8 images until I finally touched all the images of 33. I thought it was supposed to put them all to the same date and time? Here, because I do not remember the time I took these pictures in 2000, the only reason why it is important is so that the images appear in the correct order when I sort by capture time.

  I didn't know what it is about that online, but I thought I could put it out there and see if I get anything back

  Let me first explain how the "time capture Edit" is supposed to work in LR (the UI is a bit missleading here), and maybe that will shed light on what you are seing:

  • If you have a picture selected and choose "Adjust at a date and time", the time of Imaging is set to the date / time specified.
  • If you have more than one selected image and choose "Adjust to a date and time", time of creation of the most selected image is set to the date / the specified time and time of creation of all other selected images are adjusted by the same amount of time, because the image chosen was to be adjusted to the date / time specified.

  Example:

  Image	Date/time before	Time after	Change Header 4
  More selected	2010-08-01 15:00	2010-08-03 17:00	+ 2 days + 2 hours
  2nd selected	2009-01-15 01:25:13	2009-01-17 03:25:13	+ 2 days + 2 hours
  3rd selected	2003-12-31 23:00	2004-01-03 01:00	+ 2 days + 2 hours

  I guess that what you are writing is based on different (perhaps with 1 second interval) original date/time on your images.

  Gossweiler beat

  Switzerland