Missing sensor

Similar Questions

• DELL PE R710 missing sensors on the tab 'Hardware status' vCenter ESX after latest patch update!

  Last month, I update all my ESX host with the latest patches for ESX from 28/04/2011 (ESX410-201104001) via the vCenter Update Manager, earlier this month, accidentally, I have some verification to be done in the server room and noticed a hard drive failure on one of my DELL R710 Rack servers, I you connected the VirtualCenter client and when I click on the tab 'Hardware status' (where the alarms about the) Configuration hardware server usually appear), I noticed that my storage sensors are missing, the network sensors as well! ?? I recall that on March I did have another server hard disk failure, but I saw an alarm (for predictive failure) on my vCenter and I call Dell to replace the drive back!

  I also noticed that now the number of my server sensors are between 73 and 88, before I remember although there were a couple hudred of them! ??

  After some research on the net, I did I frimware/BIOS upgrade of all hardware on the servers, as I install OMSA 6.5 and Dell management plug-in to vCenter and all seems to work just fine, but storage sensors and count sensor under the tab 'Hardware status' issue was not resolved. I think there is a problem with vcenter, because when I connect directly to the host through the vsphere client, in the "State of health" tab all the material appears correctly. I found subjects with similar problems, but they have been with HP servers and not answered or solved!

  Is there anyone with similar problem or no answer to my question?

  Thanks to all in advance!

  godjak

  PSIF there need I can post some screenshots!

  Confirmed.  Without patch ESX410-201104401-SG, my other R710 has a full complement of sensors.

• Windows 7 missing sensor location

  I had to reinstall windows 7 now my position sensor is gone does anyone actually have a fix for this. I tried about 6 corrections say so far not a single one worked.

  We strongly suggest you to contact the manufacturer of the device, so they can help you set up the device.

  Kind regards.

• Envy of HP Touch Smart 17: HP Mobile Data Protection sensor missing in Device Manager

  I had a HP 3D drive guard error after installing drivers of devices in Device Manager in the control panel.  I looked on Google for answers and they said to find the right driver on the HP website, sp71811, uninstall the old drivers and install a new one for this laptop.  I did this and got an error DLL missing after restarting the machine.  You told me to uninstall again and reinstall and do not forget to restart after uninstalling.  The installation said it was incomplete, that the files were not completely installed.  I got an error message about a missing .dll file (don't have the error code now).  Something about a file stack error.  I went to the Device Manager and uninstalled the driver for the HP mobile data protection thinking can I reinsall that Device Manager but he removed the accelerometer.  Now I can't download HP 3D DG due to missing accelerometer.  How can I retrieve the accelerometer and the original problem with HP DG 3D?

  Hello:

  Try the latest version of the 3D driveguard driver...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75979.exe

• Driver file missing - Satellite L310-D4011 fingerprint sensor

  Dear all,

  I just bought laptop Toshiba L310 D4011.
  After you have installed Windows XP Pro, I've upgraded to SP1 and Sp2.
  Loading drivers (downloaded on the Site of Toshiba Support) for the fingerprint sensor, the message is - not found atswpdrv.sys.

  Anyone can throw some light on this?

  Thank you

  Ashok

  Hello!

  Have you downloaded the latest driver from Toshiba?
  And there are new versions of BIOS also available.
  http://www.PC.Toshiba-Asia.com

  So, if you install Windows XP, you must first install SP1 and then SP2.
  You can install SP2 because this service pack has already the SP1 updates.

  Good bye

• tab "Sensors" missing Jdev 11 g

  Hello
  I use JDeveloper 11.1.1.2.0 and I need to create a BAM sensor.
  
  I am following the tutorial included in this Book: http://www.oracle.com/technology/products/soa/soasuite/11gthebook.html
  
  at page 391, first line says: "click the sensors tab to start the process of adding a new sensor.
  
  but on my JDeveloper, there is no tab for sensors...
  
  You have no idea what's going on?
  
  Thanks in advance
  
  Kind regards
  
  Neuquino

  Hello
  On JDEV 11.1.1.2, we now monitor features in another perspective. So in the view of BPEL, select the drop down at the top right and select monitor Perspective. You will be able to adjust sensors here. In addition, we have created a feature called monitor Express in this version which allows you to use on the box for your BPEL process BAM dashboards.
  You can find details on http://www.oracle.com/technology/products/integration/bam/collateral/new%20features%20in%20bam%2011gr1ps1.pdf.
  Concerning
  Poyard

• 5701na stream 7: Stream 7 & sp72220 Kionix G-Sensor Driver to

  Hello
  I've exhausted forums and the web looking for a method to activate the feature of merger of Kionix sensors on my two stream 7 tablets.  Everything works very well with 'Win 8.1 with Bing', but the sensors will not successfully install under Win 10.  I unpacked the SP72220 package and then unpacked the Installer "setup.exe", which contains the drivers/inf / files/reg entries etc. from batch.  But try as I can, the Fusion of sensors Kionix device does not start, instead, it reports an error 10 and remains disabled.  You name it, and I tried it.  I have re-installed the OS several times, and I've tried the drivers Win 8.1 as well as pilots Win 10.  I even downloaded several versions of Kionix and the Internet, always with the same result.  I also tried DoubleDriver similar to backup the drivers provided by a Win 8.1 install, then restore to a Win 10 install, but then again, the appliance will not start.  I really don't like win 8.1, but if the sensors does not start, then I might well have to go back to the operating system that is installed at the factory.

  Has anyone seen elsewhere this behavior, and if yes, do they have a solution?  Personally, I think it's something to do with exe or batch files in the package.  It took me a while to understand the parameters in batch files, but I think Miss me something with dpinst.exe, wudfupdate, mkdevnode, etc.  I'm really at the end of my patience with that, but the tablet will be pretty unusable if the screen does not turn.  I fear not install the drivers and the mods reg from the command line, if anyone can help with order of preference.  It's going to be something that the installer is missing.

  Thank you.

  It turns out that it was both "n" to win 10.  Any framework as the Kionix driver needed, simply was not available in the version "n".  The driver is installed around the silence, albeit with a prompt, box, but it finished within 10 seconds.  Previously, the box opens and you would see the framework for updated driver that passes through all the options, but not install anything.  So I'm done with Win 10 Pro 1511 February 2016, the MSDN ISO.  The only other annoyance was 8.1 Home Win activation key burned in the BIOS, which caused the Win 10 install to assume it was an upgrade of the home.  I created files EI.cfg and PID.txt and thrown on the specified USB port \Sources folder Pro with the VL activation key and everything has worked.  Thanks for the comments.

• Windows 8.1 Fingerprint Sensor Driver does not

  Hello guys,.

  After I updated for Windows 8.1 my fingerprint sensor driver no longer works!

  my laptop is Envy-Dv6 7300 ex

  I trid download last update driver for Envy-Dv6 7300 ex driver fingerprint sensor digital validity 'sp58900.exe' file, but does not!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = on & CC = Aemea_middle_east & DLC = in & sw_lan...

  HP experits!  What we please? It is the urgent dinner!

  Thank you

  Abdelrahman Nabil

  Software Developer

  Happy for you missing USB driver yellow is the sensor I belive after I uninstall and reinstall easy pass HP works like Charm after the reboot!

  and it was one of the manythings that I try.

  but I guess the way to write it as follows:

  1. go to the Device Manager.

  2 - uninstall the USB not recognized yellow marke and uninstall Valideity WBF DDK to add/remove components.

  3 - Download the driver of sensor of fingerprint of CV for your labtop.

  4 reinstall HP Simple pass without uninstall it so you do not miss the credintial registered, you have sites Web and windows login.

  5 restart your knees.

  See you soon!

• Envy 17 - j020us Windows 7 drivers missing

  Hello

  I just bought a HP Envy 17 - j020us today. It came stock with Windows 8 is installed and I have, for my own reasons, decided to install Windows 7 above. Long story short, the installation has worked, for the most part. The only problem was that I was missing some drivers. I searched and found http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/ENVY-17-j020us-windows-7-driver... which was very helpful. However, there's still about 3 pieces of material that is not installed, the drivers with the network controller. I have attached hardware IDS and compatible IDS is available upon request for any "missing" material below. Can someone help me find the drivers?

  Network controller - hardware ID:

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086 & REV_C4

  PCI\VEN_8086 & DEV_0887 & SUBSYS_40628086

  PCI\VEN_8086 & DEV_0887 & CC_028000

  PCI\VEN_8086 & DEV_0887 & CC_0280

  Feature 'Unknown' - hardware ID:

  USB\VID_138A & PID_0050 & REV_0060

  USB\VID_138A & PID_0050

  Feature 'Unknown' - hardware ID:

  ACPI\INT33A0

  * INT33A0

  Any help would be appreciated. Thank you

  Hello

  Please try:

  1. network: http://ftp.hp.com/pub/softpaq/sp57501-58000/sp57976.exe

  2 validity sensor: ftp://15.217.49.73/pub/softpaq/sp45001-45500/sp45050.exe

  3 Please try: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20866

  Kind regards.

• HP Pavilion m6 - 1068ca: missing drivers after windows reinstall (hard drive failure)

  Hi, I had to reinstall windows in a new hard drive after the failure of my hard drive by default. I couldn't find any drivers. Please help me find the drivers for my PC. The ID of material for the missing parts are the following:-

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C & REV_00
  

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112
  

  USB\VID_0A5C & PID_21E3

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C & REV_0A
  

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C & REV_14

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Thank you.

  Hello:

  For the smbus and usb controllers, try the AMD chipset driver.  The first file listed.  Install and reboot.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Standard VGA graphics card

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp57269.exe

  BCM20702A0

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp56715.exe

  Ethernet controller

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56952.exe

  PCI device

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56956.exe

  Unknown device

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56957.exe

• Fingerprint sensor can be found on Portege R500

  Since my Portege R500 has recently developed a habit of not being able to find the fingerprint sensor.
  I have re-installed Truesuite (new version 2.0.2.0) but that didn't improve matters.

  On startup, I get an error software fingerprinting system is not available.
  At the start of TrueSuite, trying to footprints fingerprinting registration, I get a message "cannot open the sensor.

  Am I missing a driver or so (at the start there is also a cryptic message on a port USB)

  Any ideas?

  It of difficult to say why the new fingerprint driver or software does not solve your problem

  The whole story is really mysterious.
  The European driver Toshiba page provides the AuthenTec fingerprint software (v2.0.2.0)
  If reinstalling this software does not help the question must relate to a corrupt Windows Vista files and in my opinion that using the Toshiba Recovery CD should help.

  A question:
  Have you installed SP1?

• New ink cartridges with no sensor

  We bought replacement cartridges HP for HP 6500 has more printer (920XL cartridges) and they do not work with the printer. It seems that they do not have the same sensors as the old cartridges (see the top of the cartridge vs. the bottom page).  We bought a set of WB Mason and tried a second series of Staples, but we had the same problem with both sets.

  Someone had this problem recently?

  

  Differencess you notice are due to a HP change made in the body of the cartridge as shown in the document here.  The two cartrdiges the old and the new should be accepted into the printer.  What is the error message you see on the printer?

  If the printer is giving a message "the following ink cartridge is missing or corrupt...". ' the document here can help.

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Pavilion dv6-6166ee: help me please get missing drivers for dv6-6166ee Win10-64 bit

  Greetings

  I just reinstalled Windows 10 64 bit after a failure of the system during updates. I contacted Microsoft and they said that the problem is missing from my system drivers.

  In Device Manager, I found two missing devices,

  1. with the hardware ID fingerprint reader:

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  2 - unknown device with the hardware ID:

  ACPI\VEN_HPQ & DEV_0004

  ACPI\HPQ0004

  * HPQ0004

  Please help me fix my laptop problems.

  Thanks in advance

  Hello:

  You need these drivers...

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp58900.exe

  This package provides the HP 3D DriveGuard for laptops software
  models that run an operating system supported. HP 3D DriveGuard protects
  the hard drive in "parking heads ' if the cell phone accidentally falls or
  is suddenly struck by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• ThinkPad Yoga 14 (20FY) - can not auto-rotation, Missing in Action Center - WIndows 10

  I just did a clean install of Windows on my Thinkpad Yoga 14 10. I tried to install all the drivers that I could. The only thing missing for the laptop, it's that I can't auto-rotation in tablet mode. Auto-rotation setting is missing from the center of the action and enter the display settings is not an option to allow auto-rotation. I also tried enabling the sensor, the sensor monitoring service and Service of sensor data with no luck. What are the conditions to get this working?

  Thank you!

  I finally got it to work. After some intense searching, I found the driver that I had to install. It ends up being the Intel integrated sensor Solution. Installation of the package has work as well as the addition of a "sensors" section in device with drivers HID sensor Manager.

  http://support.Lenovo.com/us/en/downloads/ds112057

  It's weird that the driver does not show in the ThinkPad Yoga 14 drivers page.