missing video import after importation to the computer

Similar Questions

• After turning on the computer, the screen stays black

  original title: fix a black screen

  After turning on the computer, the screen stays black

  It could be that your video settings have been set to a resolution that your monitor does not support.

  You can start mode (repeatedly tap the F8 key during startup key) safe?  Safe mode requires a video resolution supported by all monitors.  If it works, try to change your video resolution settings
  (Control Panel-> display-> (tab) settings.

  HTH,
  JW

• After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

  After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

  Hello

  Some research suggests that ProfileCnt.exe belongs to a wireless card or

  Ethernet card.

  Work using the boot minimum troubleshooting to identify the troublesome program,

  then uninstall/reinstall this program.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

  What program is involved.

  Don

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

  * Original title: Vista 32-bit SP1

  I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

  I will certainly help you with this issue.

  This problem may occur if one of the following conditions is true:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Here are a few articles that you can consult in order to solve the problem.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

  How to obtain the latest Windows Vista service pack 

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

  Solve the problems when you can't install Internet Explorer 9

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them

  put all my pictures from recovery disks 1-2-3 after re buting the computer tried to re install won't let me download them help

  Hello

  Read the results of a problem similar to yours at this link Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/restore-backup-after-clean-installation/2b443d83-BFE9-4601-A055-a10e7ec7e183

  See you soon.

• Does anyone know why when I run Defender and he finds a Trojan horse, and I try to remove it, it begins to make then after some time the computer stops

  original title: Defender

  Does anyone know why when I run the defender and he finds a Trojan horse, and I try to remove it it starts to do then after some time the computer stops and when I restart it Defender always tells me there is a Trojan horse and the same thing happens when I try to remove it?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How can I find the results of a 'chkdsk' after you restart the computer?

  Original title: checkdisk

  How can I find the results of a 'chkdsk' after you restart the computer. I am running "Vista Home Premium"

  Hello

  CHKDSK (short for Checkdisk)-<-- see="" the="" vista="" log="">
  http://en.Wikipedia.org/wiki/chkdsk

  Journal of checkdisk is EventViewer which is easy to read with the 2nd utility here.

  Look in the Event Viewer to see the newspaper.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  Control Panel - Classic view - administrative tools - event - left panel - Windows logs Viewer - under the
  above - click on request - in the middle column, scroll down the list that indicates the Source - click Wininit.
  good Panel - Wininit event - click on the event properties - new window will open with the journal you want.
  Scroll as needed. Event ID is 1001.

  ---------------------------------------------------------------------------------

  If you clear the log before you checkdisk annex, it is easier to find but by time and Date
  should be easy enough.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why have I not lack of photos in the collections. How can I sort this. It's so boring after a number of collections to find a lot of missing pictures when you turn on the computer again.

  Why do I get "missing photos" in the collections of bridge. and how to use them.   so boring after the construction of a few collections to find the photos missing when you restart the computer.

  Aare move you or rename the pictures or folders having a collection? Bridge is a file browser, not an asset manager, so everything you do have an impact on the file names and locations can invalidate the elements stored in a collection.

  Mike

• Motherboard integrated audio device missing randomly after turning on the computer.

  Hello

  Old location:

  I recently changed my laptop Elitebook 2540p motherboard. When I installed windows 7 Enterprise 64-bit on my computer the computer lists not all audio devices in the Device Manager page. I checked the bios for all faulty settings and they are all good. Theres no yellow mark in the list of devices is and all the drivers appear to be installed.

  New location:

  Installed windows 7 and computer again found / installed normally audio devices. I tested computer for hours to read the audio data from it and everything worked well. I restarted computer several times / re installed the battery on the computer. A reboot the computers audio button mute fast under the screen seems to be orange and the speaker sound in windows icon has been marked as X I have check the list of devices in Device Manager and there is no audio device listed (no sound device at all). Once I restarted computer and before the computer started downloading windows I pressed the mute button and it turned blue. Then I went to windows and audio devices / audio devices has been registered and work / sound working again.

  Old location:

  I have motherboard integrated IDT audio device.

  When I try to install audio drivers from hp for 2540p site I get "your system does not have the minimum requirements for this patch." And the Device Manager does not list all IDT audio devices.

  I then installed xp, computer peripheral audio IDT normally found and sounds work properly.

  New location:

  After I made the new windows 7 install and all my audio drivers installed / devices showed in the list of devices / audio worked / I downloaded sound drivers driver HP site and install them to the computer.

  Audio problems has not appeared again after my screen mute button HP turned to orange / speaker Windows sound was marked as X / computer didn t found no audio device.

  Currently waiting if the problem happens again and try to think what would cause this (hardware or software problem)? And how to solve this problem permanently.
  

  UPDATE: I have fully charged battery / computer was off while what to do and the problem came back. Mute button fast turned to orange. No audio devices and speakers marked as x. "No audio device installed".
  

  I then installed USB headset and the computer recognizes the and the sounds are use of usb device. Theres still no IDT audio device, shown in Device Manager. Only usb headset work.
  

  Any help for this problem?
  

  -BIOS is updated to the latest version of the HP driver download center.

  -All windows drivers are installed.

  -Bios configured correctly.

  -Reassembled the motherboard and tested all the cables are correctly placed.

  EliteBook 2540p

  Windows 7 Enterprise 64-bit

  Motherboard Info: VB841AV product number

  Product model BU RCTO i7-640LM Mfdf 2540p

  598762-001 MB SYS W/PROC CORE 2 DUO 2.13 GHZ

  P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC Compaq HP ProBook, EliteBook, slate/Tablet PC, Armada, LTE. -Hp moderator of the Forum

  After change of motherboard second the audio computer´s worked well and the audio devices never disappeared from the computer. The first new motherboad that I had and I changed had broken the IDT audio chip.

• Windows Wireless Network must be started manually after you start the computer to the top.

  Have been able to automatically connect to my home wireless network for 3 years.
  All of a sudden the wireless connection fails to start. Right clicking and selecting 'Diagnose and fix' update option 'start Wireless Network '. By clicking on this solves the problem until the computer is restarted.
  So, how can I make it permanent as it used to be? (Note: bluetooth and WiFi lights are light up front and aftering diagnosis)
  Of course some service, etc. has changed, but I can't understand which should be set to 'automatic' or missing etc service/process.

  Notes:
  I put everything as advised by the site of Black Viper for Vista Ultimate SP1 standard (sevices.msc).
  Startup is normal (msconfig)
  Network and sharing Center is attributed to all (except password protected sharing)

  System: Dell XPS M2010 (no hardware changes - all original)
  OS: Vista Ultimate with XP1 update (not install them, re-installed original)

  Any advice greatly appreciated.

  Wayne

  Hi James

  Tried SFC/scannow - no problem found.

  I tried services.msc - noticed WLAN on manual, set to auto, rebooted, the problem seems to be solved.

  The big question is how does 'manual' - no account required to this idea is the only way that it connects to the home network and Internet.

  So just to let it auto update do its thing and reload the Windows updates that may have been cancelled.

  Grateful for your assistance.

  Concerning
  Wayne

• L540 missing WiFi/BT after activation of the mode standby

  Hello

  I use L540 running Windows 8.1 64bits. After waking from sleep, my Intel(r) Dual Band Wireless-N 7260 does not work. Operating system detects the NIC, but Device Manager shows the exclamation point. Troubleshooting Auto does not work. There are two ways to fix this problem - stop and restart PC or device uninstallation/installation using Device Manager. All the drivers/firmware is up to date.

  Do you have an idea what to do?

  Hi Aleksandarm,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the Wifi does not work after wake up mode standby on your ThinkPad L540.

  Please check is the (allow the computer to turn off this device to save power) is checked, to proceed to the steps you have to go Device Manager expand network adapter and right click on Intel(r) Dual Band Wireless - N 7260 go to properties, click power management and change the setting.

  Can you please provide us with the Dual Band Wireless-N 7260 (R) driver version.

  Please let us know the results once you have completed the steps above.

  Best regards

  Agnes Kumar

• Error loading operating system after shutting down the computer because of the high operating temperature

  I decided to re - install Windows XP Pro x 86 on my wife's computer. So I went into the BIOS to make sure that the CD/DVD drive has been configured to start first, and then I inserted the DVD and then restarted the computer.

  Now, the XP disc started normally. I installed XP to the point where I deleted all previous partitions and then created a new. Windows then displays the warning that the computer would not be able to boot up to what XP finished installing. I guess that's because start-up files have been deleted when I deleted all previous partitions during the installation.

  Right after I clicked on enter the warning message, the computer shuts down. No! So, I try to re-boot, in the hope of all simply continue with installing XP, but instead, the computer will display a message indicating that the computer has been stopped because of the high operating temperature. I then go ahead and get a message saying: "Error loading operating system."

  No matter what I do, I can't go any further. I can't get into BIOS or anything. If I try the F10 key (or whatever the keys are), I get a beep. It does not properly respond to my entries.

  I don't think that the high temperature operation destroyed all components. The computer stopped several times in the past. Furthermore, it would not be part of integrated security if Microsoft enabled the computer reach a destructive temperature before stopping. I think that the problem occurred during installation was interrupted just after that previous partitions have been deleted.

  BT, I don't know what to do now. Loooking for suggestions.

  Hi Diadem1981,

  You can follow this link completely & check if the problem persists.

  Error message "Error loading operating system" when you restart your computer during installation

  
  Reference: How to install or upgrade to Windows XP

  Hope the helps of information.

  Please post back and we do know.

• My continuous monitor to go blank a few seconds after turning on the computer. Change the power switch on the monitor eventually gets there after many attempts. I tried to reinstall the monitor, but it did not help. Any suggestions?

  Problem with monitor switch off automatically on start up.

  YOU really need first to establish that your monitor isn't the problem here, before starting troubleshooting upstream (your video card driver could be the next logical step).

  Awkward though it may be, you must first get your checked monitor.  If you don't have a friend or acquaintance who might be able to help, a local computer store would be a logical starting point.

  Good luck.

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.