< model: header > < end: model > in rtf does not

Similar Questions

• MICROSOFT SAYS MY SYSTEM IS COMPATIBLE BY FAR, BUT FOR SOME REASON, THIS MODEL OF DELL DOES NOT ACCEPT IT.

  HELLO, I TRIED TO UPGRADE TO WINDOWS 10 MONTHS NOW. MICROSOFT SAYS MY SYSTEM IS COMPATIBLE BY FAR, BUT FOR SOME REASON, THIS MODEL OF DELL DOES NOT ACCEPT IT. I HAVE A DELL STUDIO 540, X 64 BASED PC. PLEASE HELP, I REALLY WANT TO TRY WINDOWS 10.

  Original title: WIDOWS 10 UPDATE

  If Dell has said that it is not compatible, I wouldn't do it.  Dell needs to have the drivers and software for it or it is not working properly.  I would make sure you call, email or web-chat with Dell and ask them first.

  If you really want to try anyway (at your own risk), you can, but I suggest that do you a full picture of backup of your computer in order to "undo" that and go back to the way you are today if something is wrong or you don't like it.

• TPServer 8710 - Custom conference ending the notification text does not

  Hi all

  in our network, we have 8710 TPServer and etc.

  the "Conference of custom ending the notification text" does not work

  What do you advise?

  tkanks a lot.

  Hi Onur,

  We have therefore 3 numbers

  Conference custom ending the text of the notification, notification of CTS - Man 10 minutes and 2 minutes of GST.

  This should be no Rendevouz for meetings,

  -What version of CTSMAN?

  -Do you see the BBFRR in CTS?

  -See you BBFRR in C20?

  -Do you think the meeting scheduled in CTS - Man?

  -When in the conference can you send a normal text to CTS?

  For one of the question:

  Use of conference custom ending the notification text

  Ending Conference custom notification text

  End notification text Customer conference

  If you check the help:

  Use custom Conference end notification text allows the telepresence server to use a personalized message to warn participants that the Conference ends.

  The telepresence Server uses a message by default unless you check and write a personalized message. The default message is that this conference is about to end.

  Does not apply to the Cisco CTS endpoints.  See the reference endpoint interoperability for more details

  -Gonzalo

• Model editable region does not

  I use DW2004.  I have a model with a number of editable regions.  A region is causing me problems.  When I apply the template to a page, the BeginEditable and EndEditable tags become the modifiable themselves.  Try saving the page causes errors on registration of changes to areas that cannot be changed.

  The model has this combo box:

  <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->

  <! - MainText - >
  < div id = "MainText" >
  < div align = "left" >
  <!-TemplateBeginEditable name = "MainText"->
  Main text
  <! - TemplateEndEditable - >
  < / div > <! - align left text - >
  < / div > <! - MainText - >

  MainText is a CSS style

  #MainText {float: right; width: 565px; margin: 0 0 0 0; background-color: #ffffff ;}}

  In the document after the template is applied, I get the following.

  <!-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++ -->
  <! - MainText - >
  < div id = "MainText" >
  < div align = "left" >
  <!-"MainText"-> #BeginEditable
  < table width = "329" border = "0" cellpadding = "10" >

  It comes from the <!-#BeginEditable-> "MainText" can be changed.  If I make a return after the "->" tag is more able to be changed.  Even with the changeable of the end tag.  As soon as I come back to Design view, the code changes to become editable.

  For now, I have about 150 screwed to the top of pages after the execution of an update of the model.  Can anyone help?

  'Mistakes' which highlight the lack of alt tags on graphics is part of the constraint of accessibility on the creation of all components so that they can be accessible... where the graphic is not loaded, in which case the user employs a screen reader and so on. About an image used as a dividing line, you can probably just put alt = "", as the graph does not add any content information and in fact would be disturbing to understand your page to users of screen readers. "

  It's what w3schools VBScript:

  What is VBScript?

  • VBScript is a scripting language
  • A scripting language is a lightweight programming language
  • VBScript is a lighter version of the Microsoft Visual Basic programming language

  I had not seen this error before. If you use javascript, in fact, I think I want to modify this code to

  I agree with your updated solution. It's like trying to untie the knot of Gordium, which (if you remember) was "untied" by slicing him with a sword. So do new pages from the improved model and move content manually via cut and paste are your best bet.

  Beth

• Data Modeler 3.0 EA1: import areas and model 2.0 does not work

  If I import (or open) a relational model to model 2.0, which refers to the areas, model 3.0EA will not recognize the areas. I find myself with a model full of types of columns 'UNKNOWN '. I tried to import the areas first, and then import the model opening (or import) model and then the areas and even import areas in fields by default before you open the template. Nothing works; column types will always be marked as UNKNOWN.
  
  Is it me or a bug of the "known"?
  
  Bert Landry

  Hi Bert,.

  Version 3.0 doesn't know anything about your domains - just copy defaultdomains.xml 2.0 installer (it is in the datamodeler\domains directory) to 3.0 directory datamodeler\datamodeler\types.

  Philippe

• photosmart HP 6510 model B211a black does not print

  Replace the black cartridge with a 564 XL HP cartridge.  We used XL cartridges of HP past and only use brand.  It does not print in black - tried 2 other cartridges with no luck.  Ran the clean and align the cycle at least 4 times and still no luck.  Is there a way to reset to factory default or somehow get this to print in black.  The other fine print cartridges.

  Becoming very frustrated.

  Thank you

  Scott

  Follow these steps above with no luck.  Decided to call HP and they have is not the printer but wants to see me one handed at a reduced price ($100).  They send a label for me to post them the wrong printer because I am sure that they resell and it happens.

  In my view, that the printhead is malfunctioning for the black cartridge only.

• Toshiba LX830 - END/PRTSC Screen Capture does not work

  Hello

  I use a Toshiba LX830 with Windows 8.1.

  The END/PRTSC button on the keyboard does not work, it is the same key on the on-screen keyboard. I'm trying to take screenshots. Various combinations have been tried for example ALT + END/PRTSC, FN + END/PRTSC, FN, CTRL + END/IMPR.

  Nothing is entered for paste in Paint.

  Any help would be appreciated. TIA

  I found the answer: Windows + Fn + PRTSCN

• Header running including the text does not appear

  I have a table with a number of lines, each one for a different product. Each product has a type of product. The type of product does not anywhere in the line. But I want to use the product type in a header running on the master page. Is there a way to make the hidden text, it can be picked up by the variable header running but not displayed in the cell where it is defined? Or y at - it another way to accomplish what I'm doing?

  I'm generating the table programmatically, so it is easy to add type of product with a character style for the text of the first cell in each row. I don't want just the product of the first cell to display type part.

  Thank you!

  Unlike a table of contents that can be non-printable text, I don't think that a variable will do that, using the method of Willi to make it invisible is so logical. I would go a little further, however, I think and place this information into something anchored in one of the cells. Set the positioning custom, so it has no effect on the flow of text.

  I would define also an object for these anchored frames style that has both a definition of position to the anchored object, so you don't need to do all the time, and the good assigned paragraph or character style to be picked up by the variable. During the editing phase, I would define it as red or another contrasting color so that you know that you will see if it is present and will be able to spot when he is away and then change the style definition to give the text a fill [None] just before the release.

• BSOD: "a process or thread crucial to system operation has unexpectedly released or ended." Startup Repair does not solve the problem-

  I recently had a serious viral infection on my laptop Windows Vista SP2 Gateway.  After you run the antivirus AVG cleaner, who seemed to have had to quarantine or delete some files infected, System I couldn't Boot Windows to the top on this machine - even in the (all flavors of) Safe Mode.  When you try to start, I'd get

  a Blue Screen of Death with the msg of error in the title of this thread.  Before turning off the crash dump, the system indicated:

  ' * STOP: 0X000000F4 (0 X 00000003 0X85F22848 0X85F22694 0X82A26AB0).

  Other messages in the BSOD said I might have new HW causing the BSOD (I did not - but nevertheless I removed all external HW and tried again - got the same result).

  So one of the first things I did was to capture the startup log, so I could see what the pilots were hang up / does not.  Here's what I found:

  (1) the last driver to load (as indicated in ntbtlog.txt) was monitor.sys.  My understanding is that this indicates that when this driver loaded, the system crashed at this place - suggesting that there is 'something wrong' with this particular driver.  However, it seems likely, that I can use the screen/monitor (built-in) to the laptop without problem.

  (2) several drivers do NOT load: they are:

  1 NDProxy.sys

  2 Kvhfjgcv.sys

  3 Kbdhid.sys

  4 i8042prt.sys

  QUESTION 1: "Monitor.sys" being the last driver to load, should I assume this is the driver the system hung up on (that is, which caused the BSOD)?  And if so, that means I should replace this driver?  If so, how do I do that (how and where can I get a copy of 'Clean/good' of monitor.sys)?

  QUESTION 2: Is it possible to get "good versions" of drivers I listed above which was NOT loaded (I guess they didn't not load because they have been corrupted by the virus or the virus cleaner, or maybe just deleted by the virus cleaner because they were infected) to put into the Windows\System32\Drivers folder?  How?

  Here are the steps I took to try to fix the "corrupt system".  I inserted my Windows Vista DVD into the DVD drive and loaded Windows using that.

  Once that came, I then tried the following (and here are the results for all that I tried):

  (1) I selected the option "Repair", then choose "Microsoft Windows Vista" OS and press "next".  He tried to 'attempt to repair' for 15 minutes about, then finally stopped with a message: "Startup Repair cannot repair this computer automatically.  "Details of problem indicated: (a) the problem event name: StartupRepairV2." Signature 01: ExternalMedia; Signature 02: 6.0.6000.16386.6.0.6001.18000; Signed 03:6; Signature 04:131074. Signature 05: 0xF4; Signature 06: 0xF4; Signature 07:0; Signature 08:2; Signature 09: WrpRepair; Signature 10:5; OS version: 6.0.60090.2.0.0.256.1

  (2) I selected the option 'display diagnostic and repair details '.  He said that all tests successful (error code = 0 x 0), and

  then indicated the 'cause': ' unknown error checking: bugcheck f4, parameters = 0x3, 0x88607b80, 0x88607ccc, 0x82a78ab0. "

  - AND -

  Repair action: repair and checking the integrity of system files.  Result: failed.  Error code = 0 x 5

  (3) I checked that the restoration of the system, and even though I know I had some Restore Points created at the origin of this system, System Restore has indicated that there was no restore points to go back, (leading me to believe that the virus must have killed)

  (4) so I chose the selection "Command Prompt", which opens by default "X:\Sources >".  I'm in C: and then typed: "sfc/scannow".  The system has responded with the following messages:

  "Start system analysis.  This process will take time. " follow up 30 seconds later by the message:

  "Windows resource protection could not perform the requested operation".

  MAIN QUESTION: any reflection on what other tools and options I try to repair the windows installation / driver set?

  Hello

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/958233

  Method 2:

  Connect over winre and rename the driver files that he talked with *.old quick order. You can find these % system32%. Follow these steps:

  a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).

  b. in WinRE, open a command prompt. To do this, follow these steps:

  On the screen to install Windows, select the appropriate language to install, time and

  currency format and keyboard or input method options and then click Next.

  c. click on repair your computer.

  d. click 7 installation you want to repair, and then click Next.

  e. click on command prompt.

  f. navigate to % system32% and rename old files 8.

  Method 3:

  After step above the computer restarts. Run the System File Checker tool to troubleshoot missing or corrupted system files. Follow the steps from the link:

  http://support.Microsoft.com/kb/929833

• Ending a course/lesson does not

  I have prepared a lesson and it works perfectly when I saw the project as a pdf. On the last slide, I have an exit button and have implemented everything that I believe needs to be put in place to complete the course when this button is clicked.

  Then I published in HTML5 and transferred to my LMS - and everything works except the exit function!

  Leave the button on the player to captivate does not work either.

  I must have missed something somewhere - but as a new user, I don't know what I've missed.

  All advice is appreciated. I use 9 Captivate.

  Thank you

  Generally, you are either launch the content in a separate window, in which case the user closes just this window using the kill the browser button in the upper right.

  But if the content inside some sort of SCORM player where there are several lessons and a table of contents that the LMS provides then launch your learner might just be selecting the lesson well or next to the table of contents by clicking another button/link which is theirs on-screen LMS, hence they have initially open the course.

  Anyway, the point is that the Exit button is usually only goes to work reliably in some circumstances, and given that these circumstances are often beyond your control, I find that he is not better because it is there.  LMS most provide better ways to navigate a course between modules.

• Model change DreamWeaver does not update of child Web pages?

  Hello group,

  
  Sorry for my question from newbie here.

  I loaded a HTML Web page and try it in a DreamWeaver template file.

  I then created Web pages from the template file ((fichier-nouveau-Page à partir dele de modèle-Site-modèle) and made sure the checkbox "Update Page when changes were made to the model" was selected/checked.)

  Then, I created several children Web pages and saved as .html files.

  I decided to change the system of navigation - part of the region of uneditiabel in the model - bar by opening the template file and edit-ing this file and then saving them in the same DreamWeaver template file.

  However, Web pages were not updated to reflect changes to the navigation bar in the French model?!

  Can someone tell me what I am doing wrong?

  

  I think it's something I'm doing wrong with DreamWeaver...

  If anyone is interested, here is the HTML code.

  -----------------------------------------------------------------------------------

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN".
  "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml">".

  < head >
  <!-TemplateBeginEditable name = "DocTitle"-->
  < Title > CNC Joe workshop - Home Page < /title >
  <! - TemplateEndEditable - >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  "" < link href = "... / style.css" rel = "stylesheet" type = "text/css" media = "screen" / >
  <! - keep the http-equiv for IE8 meta tag - >
  < meta http-equiv = "X-UA-Compatible" content = "IE = 8" / >
  <! - link CSS file here - >
  "" < link rel = "stylesheet" type = "text/css" media = "screen, projection" href = "... / style.css" / >

  < / head >

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -->
  < body >
  < div id = 'wrapper' >
  < a name = "top" > < / a >
  < a href = "index.html" target = "_self" title = "Home Page of CNC - Joe" > "
  "" < img src = "... / joesworkshoplogo.gif" width = "770px" height = "300px" alt = "Shop CNC Joe - Home Page" / >
  < /a >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-BEGIN OF MENU DROPDOWN->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->

  < div class = "mainmenu" >

  < ul >
  < class li = "li_nc" > < a href = "index.html" target = "_self" > home < /a > < /li > "
  < class li = "li_hc" > < a href = "cad.html" target = "_self" > CAD < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "cad_intellicad.html" target = "_self" > IntelliCAD < /a > < /li > "
  < class li = "li_nc" > < a href = "cad_draftsight.html" target = "_self" > DraftSight < /a > < /li > "
  < class li = "li_nc" > < a href = "cad_progesoft.html" target = "_self" > Progesoft < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "cam_html" target = "_self" > CAM < /a > < ul class = "ul_ch" >
  < class li = "li_nc" > < a href = "cam_mach3.html" target = "_self" > Mach3 < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_vcarve.html" target = "_self" > V-Carve < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_cut3d.html" target = "_self" > Cut 3D < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_bobcadcam.html" target = "_self" > Bob-CFAO < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_meshcam.html" target = "_self" > lattice CAM < /a > < /li > "
  < class li = "li_nc" > < a href = "cam_deskcnc.html" target = "_self" > desktop CNC < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "projects.html' target ="_self"> project < /a > < ul class ="ul_ch">"
  < class li = "li_nc" > < a href = "projects_zzeroplate.html" target = "_self" > Z zero plate < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_x0y0edgefinder.html" target = "_self" > X 0 - Y0 Edge Finder < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_digitizingtouchprobe.html" target = "_self" > touch scanning probe < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_millwebcam.html" target = "_self" > mill webcam < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_laseredgefinder.html" target = "_self" > Laser Pointer Edge Finder < /a > < /li > "
  < class li = "li_nc" > < a href = "projects_davidlaserscanner.html" target = "_self" > David Laser Scanner < /a > < /li > "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "reference.html" target = "_self" > reference < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "ref_gcodes.html" target = "_self" > G-codes < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_nema.html" target = "_self" > info motor NEMA < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_vbearings.html" target = "_self" > V-bearings < /a > < /li > "
  < class li = "li_nc" > < a href = "ref_linearguides.html" target = "_self" > < /a > < /li > linear Guides "
  < /li > < /ul >
  < class li = "li_hc" > < a href = "offtopictopics.html" target = "_self" > off-topic topics < /a > < ul class = "ul_ch" > "
  < class li = "li_nc" > < a href = "ott_backyardfoundry.html" target = "_self" > BackYard Foundry < /a > < /li > "
  < class li = "li_nc" > < a href = "ott_blacksmithing.html" target = "_self" > forge < /a > < /li > "
  < /li > < /ul >
  < class li = "li_nc" > < a href = "links.html" target = "_self" > links < /a > < /li > "
  < class li = "li_nc" > < a href = "contact.html" target = "_self" > Contact < /a > < /li > "
  < /ul >
  < / div >

  <!-END OF THE MENU drop-DOWN->

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-END OF THE MENU drop-DOWN->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~ -->
  <!-TemplateBeginEditable name = 'content'->
  < h2 > projects: scanning Touch Probe: < / h2 >
  < ul >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < li > < /li >
  < /ul >

  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!--end of the editable - the rest is boilerplate-->
  <! - TemplateEndEditable - >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  < br / >
  < p > < a href = "#top" > top < /a > < /p >
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  <!-- Footer Region                                                                                    -->
  <!-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~ -->
  < div id = "footer" >
  < hr / >
  < p >
  "< a href ="http://validator.w3.org/check?uri=referer">."
  "< img class ="logo"src ="http://www.w3.org/Icons/valid-xhtml10"alt ="Valid XHTML 1.0"Transitional height ="31"width ="88"/ > < / a >"

  "< a href ="http://jigsaw.w3.org/css-validator/check/referer">."
  < img style = "border: 0;" width: 88px; "height: 31px;
  "Class ="logo"src ="http://jigsaw.w3.org/css-validator/images/vcss"
  ALT = "Valid CSS!" / >
  < /a >
  < /p >
  < h5 > < strong > < i >
  This site is only for educational purposes. Any resemblance to any person, alive or dead - is purely coincidental
  < /i > < / strong > < / h5 >
  < / div >
  < / div > <!--end Div Wrapper - >
  < / body >
  < / html >

  OK - I thought about it!

  When I edited the .dwt model - I used 'SAVE AS' to save the file - it's FAKE!

  I should have used just on 'SAVE', and DreamWeaver then asks if I want to update the files created with the template.

  Further Questions:

  -Whence the DreamWeaver store information about which pages were created with what model?

• Microsoft wireless mouse model 1007, wheel does not

  original title: Wireless microsoft model 1007 mouse, wheel

  Microsoft wireless mouse model 1007, wheel works and what doesn't. What's up w / that?

  Hi BradCasey,

  I suggest you to follow the steps described in the article provided below and check if it helps.

  http://support.Microsoft.com/kb/838398

  http://support.Microsoft.com/kb/239679

• Mandatory label with help - model of wording does not work

  Hello
  
  I use Theme16 and have a text field with the following label properties.
  

  Label
           Template - Required Label with Help

  But nothing changes when I display the class text Label in the.
  
  Thank you
  Deepak

  Hello

  You can use all the images located in the Apex.
  If you download Apex installation zip, you can check image folder which images it y a. then use those who, for example as /i/themes/theme_1/image.gif

  BR, Jari

• End of chapter action does not not as advertised

  In the scenario, I created two chapter points and wanted to see the menu displayed at the end of each chapter.  The current approach of end shows the last Menu.  Yet when it is burned, the BD just continues to go to the next chapter after chapter is finished.

  What I've done wrong?

  Thank you!

  It is not clear that you have applied the "last menu" to apply it to each chapter. Link a button to each chapter. Does it work?

• High-end non apple headphones does not properly with iPhone7

  I just bought the new iPhone 7 and discovered that my ear Bowers & Wilkins do not seem to be compatible with my new phone.  The sound works fine but the microphone and stop working after a pause control more then a few minutes.  I thought it was a question of headphones, so I have replaced, but still the same issue.  So for example I connect my headset into the adapter (supplied by apple), launch my music application, press play on the phone and the sounds of beautiful high definition comes out.  I can then press pause on the microphone control, press a second time to play and it works fine as do volume adjusters.  However, if I press pause and wait a few minutes, the remote control on the speaker cable does nothing.  The sound still works if I hit 'play' and 'pause' on the screen.  As soon as I unplug the headphone jack and plug back in, the remote works again, until I pause for a longer period.  It seems to stop responding when asleep screen and pause mode.  I disabled the screen lock to see what is happening.  Now pause mode for more than five minutes, the remote works but the screen stays on!  If at this stage, I turned off the screen (paused).  Two minutes later, distance mic and controls do not work.  So certainly associated with iPhone screen go to sleep.  Does anyone else have this problem or the solution.  This problem will not occur on the iPhone from my friend 6.

  Apple is aware of an issue affecting the controls on the headphones by the port of lightning and working on a fix.