Modem wireless Qosmio and Alcatel speedtouch

Similar Questions

• I have a wireless printer and changed modems and need to know where to go and change the security key to make it work wireless

  I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

  I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

  The method depends on the printer. Read the instructions or uninstall, and then reinstall the printer. It will ask you the modem settings.

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• My laptop does not recognize my modem wireless of suddenlink cable/wireless.

  My laptop dose not recinise my modem wireless of suddenlink cable/wireless, I had to format my hard drive and I lost the info. for the wireless modem, I tried the KeyCode and it will not reconise the code.

  Hi Richard,

  What is the number and the model of wireless modem?

  You can get in touch with your ISP (Suddenlink) provider for further assistance on this issue.

  SuddenLink Support

• Encryption advice please WRT160N router/gateway/modem wireless

  I would like clarification on security and encryption please.

  I have a WRT160N router/gateway/modem wireless with WPA security is enabled.  I have a wired office with LELA installed and a wireless laptop.  A key is required when connecting the laptop but on page properties in LELA, it says "wireless encryption - no ' is this extra encryption in addition to the security theWPA. WH n I try to enable it, LELA asks the password admin but after entering that does nothing (except once again ask!)  What I am doing wrong?

  Thank you

  That your network is already reached, but him dosent software LELA display you something on your safety. This means that the LELA was not able to properly synchronize with the router and its wireless settings. So in this case, you do not have to worry about this, if you want you can uninstall and reinstall the LELA software on your computer, that might solve the problem. Or of another Complitely uninstall LELA software from your computer.

• is it possible to connect 2 computers 2 different 1 modem wireless routers

  is it possible to connect 2 computers 2 different 1 modem wireless routers?

  Why do you have 2 routers?

  Depends on the design of the modem. It probably only supports a connection. So, you'll probably end up making a wired connection between modem and "1 router" and if you really need a second wireless router, install a wired connection between the 2 routers.

• Windows Vista does not work with modem wireless broadband

  I saw no answer to this problem.  Can anyone help?

  Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G.  The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless.  Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.

  Summary:
  Vista / Netgear wired - work
  Vista / Netgear wireless - does not work
  XP / Netgear wireless - work

  I went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop.  I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft.  I am convinced that it has something to do with Vista.  Any ideas?

  Hi jhandcc,

  Please provide the complete error message you receive.

  Step 1: You can follow the steps described in the article below

  Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/948180

   

  If the problem persists,

  Step 2: Download and install the latest service pack for windows vista on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791/

   

  Reference:

  You cannot connect to a wireless network on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935222

   

  For more information, see the link below

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Let us know if this helps

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change of modem wireless on HP Pavilion dv9700 CTO Entertainment Notebook PC

  I have a model laptop DV9700 CTO Entertainment Notebook.  It came with a modem Wireless 'G '.  I wonder if I can change the internal modem into a wireless "N".  I know I could install a modem to USB port and select that make my connections but USB ports are a bonus and I prefer to do the internal switch.

   

  Is this possible. ?  HP makes a modem of replacement in the "N" category for this laptop. ? I searched around and can't seem to find a part to study number.

  Hello

  Dan202 wrote:

  I have a model laptop DV9700 CTO Entertainment Notebook.  It came with a modem Wireless 'G '.  I wonder if I can change the internal modem into a wireless "N".  I know I could install a modem to USB port and select that make my connections but USB ports are a bonus and I prefer to do the internal switch.

   

  Is this possible. ?  HP makes a modem of replacement in the "N" category for this laptop. ? I searched around and can't seem to find a part to study number.  HP uses modems Intel and Broadcom 802.11n for this series of portable

  Don't forget that some 802.11n Intel modems use a configuration triple antenna as well. This means that the replacement of the modem (if Intel) requires a display of both replacement block.

  An accurate answer requires better identification of your laptop.

  Look at the label with barcode at the bottom of your laptop. After all, there, except the serial number.

  Here is a link to the maintenance and Service Guide.

  All the information found in the manual. The trick is to know how to use the manual.

  Best regards
  ERICO

• PhotoSmart 3210 All In One wireless network and does not know how to connect now lost.

  Hi, I have a 3210 all in one Photosmart, and I can't find it on the network more.

  I know that I've done worse of unistalling, reinstallation of the driver HP software and change the IP address of the printer. So I hope that someone can help me with this problem and return to the place where its still visible.

  I have a PC with XP and a Mac with OS 10

  Computers are both connected to the modem wireless cable router.

  The printer is connected to the router via ethernet.

  I can see the printer using a browser and entering the IP address of the printer. I can ping its IP address. The Mac can see the printer, but have installed the correct drivers to see (I think I can handle this, no need to worry about this yet).

  The problem is that I can't see it in the "Add a printer" Wizard on the PC. So I can't add it to the PC.

  I looked around the support of HP and they told me to uninstall the drivers and reinstall them. There was also mention of changing the IP address of the printer to a larger number, but that no longer works. So I went to the automatic assignment of an IP address to the address of the printer. And finally, I've seen mention to unplug the printer and by pressing 'ok' and 'Cancel' all plugging back in. He did a very long installation, but does not solve the problem.

  I searched the forums for a solution and can not find one - so I've exhausted all help (Ive been on the forums enough to know to search before posting a question).

  If Im not sure what to do next. Someone at - it suggestions? I don't really know what I can do to fix this problem: I'm sure it is just a corrupted file or bad setting somewhere I just do not know where he is.

  Thanks in advance for any help.

  Message edited by creeg on 30/09/2009 22:42

  For your Mac:

  If you're running Snow Leopard, the driver for the 3210 is compiled.  Open the applet Print & Fax under system preferences, then press [+] to add the printer.  For other versions of Mac OS, download the driver from here and run the installer.
   
  If you continue to have problems with the Mac, reset the printing system Mac and repeat the instructions above.  Information about resetting your Mac printing system can be found here (http://support.apple.com/kb/HT1341)

  For the PC:

  The 3210 is on the network, we will try to add the printer manually. First verify that you can access the printer's internal web page by accessing its IP address or host name.  You can find the IP address and the host name by printing the network configuration page.

  Here is the sequence of manual installation of the printer driver for XP:

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the host name of the printer. You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Question about wireless, routers and network adapters... hope is the right place for the?

  I have a modem to my cable service and I was told that I could network 4 (3 desktop computers and 1 laptop) computers. I plugged the modem, I plugged the router up... i put in the disc of the cable operator to make the wireless network and it does not connect them for some reason any. the cable service representative didn't tell me, I would need something more, but would need one of these network adapters wireless that goes into the USB port on the back? the computer on which the modem is hung up works fine... it's one of those self install the things I told them that I'd rather have a tech cling to me but they insisted that I could do... (obviously any fool can do, I'm not a fool... I'm just stupid! lol "title =" Smiley Tongue"/ > can someone just tell me if I would need one of the cards or y at - it a way to tell if my computers are ready for the wireless... I have 2 dimension E310 XP media center copmputers... is tehre a way to check whether she would need the adapter or not... hope I explained everything properly...) Thank you bunches! antkaki [renee]

  third time to post my question, don't know why it is being deleted... someone can let me know?  Thanks again

  
  

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Wireless keyboard and trackpad malfunction since El Capitan

  Since the upgrade to El Captitan, I turn my wireless keyboard works after almost every sleep system order of the to make it usable again. Otherwise El Cap or any application would react to shots of keyboard with a separate period and, often, repeating only one several times.

  With Yosemite, everything was fine.

  My configuration: trackpad, mouse mighty mouse and keyboard, all wireless, on a late 2013 27 "i7 iMac with 32 GB of RAM, no later than OS X.

  Any ideas?

  There are a number of issues to support why this could happen. Have you tried to reboot the device? Also - are the batteries discharged on the wireless keyboard and the magic trackpad?

• Using a new wireless keyboard and trackpad?

  Can you use a new Apple wireless keyboard and the trackpad designed for Mac OS with an ATV nine?

  Thank you.

  You must have the latest tvOS 9.2 update. Specifically, it adds support for keyboard not in the original. I doubt that she would support a trackpad; It's experimental. Furthermore, there is an app for Apple TV iOS. I paired a keyboard with my ATV, but use the remote to input keyboard app, because it's so convenient.

• Satellite T110 - Wireless disappeared and can not re - activate

  Recently, I have a 3 month old toshiba satellite, the problem I have is that when I initially shot to the top of the laptop the wireless light was extinguished, and the Fn F8 combo did not work. The light is on but only active / disable bluetooth. I don't see the device wireless network, only the LAN card settings.

  I reinstalled the wireless drivers, and this has not solved the problem. Toshiba radar indicates that the wireless device is disabled but I don't know how to activate it.
  It worked about 2 weeks ago and I was able to connect wirelessly without problem.

  Any assistance before considering again at the store.

  Hello

  Normally you can toggle the WIFI connection if you press the FN + F8 key combination.

  If that doesn t work, I would recommend updating BIOS. You can find the latest version on the Toshiba site.
  Check this box!

• Qosmio G10: Qosmio and Windows startup Logo only appears during startup

  Hi all

  Strangely, I turned on the laptop and a white screen is all I can see - not even the backlight of the TFT screen. For I type my password to start blindly and press on enter, and the computer does its thing for 45 seconds (still nothing on the screen and no backlight either) and then all of a sudden the screen password of Windows and the backlight lights up as usual.

  So, indeed even if I can access my computer as usual, I can't access my BIOS, or make changes to the Windows startup.

  I haven't got a clue what the problem is? Any ideas?

  Thank you

  Warren

  Hello Warren

  Is it possible to test it with external display? Connect external monitor to the Qosmio and press your power button. I am really interested about result.