Module error

Similar Questions

• RTF model error: compilation in the hidden module error.

  I use MS Word 2007 to change my rtf models.
  After installing the patch PS2 for MS Office I can't edit the rtf models more.
  When I try to edit any field in the model I get a message box with the 'Microsoft Visual Basic' header and the message "compilation in the hidden module error: Module_editFF.
  I noticed that the BI Publisher tab is no longer visible in the toolbar. I uninstalled the add-on and reinstalled again, the question remains.
  Any help will be appreciated.
  Thank you.

  If you do not see the BI Publisher tab, then go to MS Word-> Word Options-> Add - ins-> manage-> select Add-ins Word and make so that the "Templatebuilder.dot", TBCrosstab.dot etc. are checked.

  Thank you
  Bipuser

• Equium A100: Cannot open 'Accessibility' - complete common Module error

  Toshiba assist on my Toshiba Satellite A100 laptop, I press the accessibility of the icon. He then came with the error 'Common Module complete'.

  Help would be appricitaed.

  Hello

  The common modules is a Toshiba application that is necessary if you want to use and install another Toshiba programs such as controls for example.
  You simply remove the modules common and after restarting the laptop new install program.
  If you won't find the common modules in the area add & remove the list of programs and you will not be able to remove it then just reinstall.
  It helps to...

• Satellite A100: I am not able to use the keys FN - common module error

  HY,

  I have a toshiba satellite A100 series and I have a problem:
  I'm not able to use the fn functions (for example fn + f9 to turn off the touchpad or fn + f3 to the eve and so on...) and I got an error concerning "common module.

  A dialog box told me that the common module is closed...
  Someone knows this problem?

  I'm sorry for English...

  Thank you

  Hello

  I put t know why this error message and why the common modules stopped working, but to my knowledge, the common modules are needed to run and use the FN keys for example.

  So here is my advice;
  Go to Toshiba's European diver page, choose the common law modules, download, unzip, and reinstall it again!

  After restarting again the FN keys should work again.

  Best regards and good luck

• cFP-AO-200 analog output module (error-33180)!

  Hello everyone

  I use the CFP 1808 Bank as well as other such modules that HAVE 111 and enter I-110, I recently bought a Module AO-200 out of the currents of the order of 4-20 mA, I connected the module to the Bank and updated the device of the MAX Software, then I opened the Getting Started/Analog Output.vi leave examples in Labview to test 2011 map the VI returns an error with the code 33180 for me, I don't know what the problem is, but I tested the card with the MAX and wrote the values to it successfully.

  Can someone tell me what is the problem with my VI

  Thank you

  I was able to reproduce your error. You must select 'All' in the Point IO Point field for this vi.

• FPGA IO Module error, recognizes NEITHER 5751 in LabVIEW

  Here is my configuration:

  • Windows 7 sp1, 64-bit
  • LabVIEW 2013 sp1, FPGA, real-time

  Which is connected via an Ethernet cable to:

  • Chassis SMU-1078
  • SMU-8135 embedded controller
  • SMU-7961R FPGA x 2
  • Module e/s NI 5751 x 2
  • LabVIEW time real 13.0.1
  • NOR-DAQmx 15.1.1
  • NOR-RIO 15.5
  • OR PXI Platform Services 14.1.0

  NOR, Max the FPGA and 5751 adaptation Modules appear as a gift. But in my LabVIEW project, IO Modules always show an error. I chose the good 'NI 5751' option, but the State still shows this:

  

  I tried to restart the chassis and the computer. I tried selecting another Module of e/s and then back by flipping. I am also unable to compile the code example on the FPGA (Xilinx errors).

  Any ideas?

  The status shows you which adapter module expects the bitfile who is currently on the fpga module. The reason why it says no is probably because you have not deployed anything the fpga target since he powered and there just the default image loaded on it. Try deploying a bitfile to which has been compiled to work with a 5751 and you'll be fine.

  I do not know why you can not compile the 5751 get started example however. I'd make sure you have all the build tools installed correctly. What are the mistakes do you receive when you try to compile? Such problems are sometimes easier to solve by phone if you want to open a support on ni.com/support ticket.

• Parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the faulitng module error

  original title: problem with shdocvw.dll

  Hey guys just a quick question.

  bascailly, I'm working on the first line of support for a company and we have created a software for the United Kingdom NHS, basically our software is used by doctor general practitioner through the United Kingdom to read documents electronically.

  a question we seem to become much lately is certain parts of our software will disappear and then when it is closed, we get the usual "software encounterd a problem and needs to close" and the module faulitng error. When event viewer is selected the below appears.

  Failing application dme7_client.exe, version 7.1.0.270, failing module shdocvw.dll, version 6.0.2900.6212, address 0x000b26fe failure

  It seems that the only way to solve this problem is the newspaper on a differnet and use them as seems to be the specific user. does anyone have any ideas of what we can try to solve this problem without obiously the user with a different account?

  see you soon

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link below to ask your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories

  I hope that helps!

• Adobe reader - defective module error: Comctl32.dll

  Running Windows 7 Home Premium, SP 1.
  Computer is ACER Aspire - laptop 4830TG with 8 GB of RAM, processor intel i5 - 2430M.

  Not sure when this happened, but I am unable to open Adobe Reader 10.  The error indicates the fault module to be Comctl32.dll, specifically,

  C:\Windows\WinSxS\x86_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\Comctl32.dll

  The size is 619KB

  Player will initialize, but off vacuum and freeze as soon as he tries to do anything, including the posting of a menu bar.  I reinstalled drive several times and took first.  It seems that the issue is really the Comctl32.dll file.  There are so many versions on my system is unable to find a way to tell if it is corrupt.
  Virus scan shows no risk.
  Cannot restore far enough to make a difference.

  Does anyone else have a problem like this?

  Any other suggestions?  I really appreciate one, hoping you have another for the flash player or I can't watch all the great you tube movies.

  Nothing else. that I can help. A Google search reveals some results.
  https://www.google.com/search?q=Adobe+reader+error+-+Faulty+module%3A+Comctl32.dll&rls=com.microsoft:en-us&ie=UTF-8&oe=UTF-8&startIndex=&startPage=1&rlz=1I7GGHP_enUS449#hl=en&rls=com.microsoft:en-us&rlz=1I7GGHP_enUS449&sa=X&ei=WOowUNnZBtOXqAGa74C4Cg&ved=0CEkQBSgA&q=Adobe+reader+error+-+Fault+module%3A+Comctl32.dll&spell=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=3a3b7bc5f354e183&biw=1198&bih=628

  And if all else fails:

  Adobe Reader forums *.
  http://forums.Adobe.com/community/adobe_reader_forums/adobe_reader

• Book Module error "Unable to contact Web Blurb"?

  I used Lightroom successfully in the past to download a book without any problems. I am running the newest version of Lightroom v 5.6. I have just finished a new book and get the error message "could not contact the Blurb Web Service. Check your internet connection. "My internet connection is fine, my firewall and anti-virus are turned off, I rebooted my computer and Lightroom. The same problem.

  My research has shown, it is a very common problem, but all the forums I found have no answers on how to solve the problem. All the posts I found on this problem are either unanswered or suggest things like turning off and on again 'uncheck apply background in the world' and other stuff related to the background and the text, or change the style of the cover back, etc.. None of them worked for me.

  I'm ordering this book as a wedding for a client album and it is URGENT that I get the order uploaded in the next few days, or I'll have to refund the payment to its customers and lose the work, which would be extremely professionally embarrassing. I am VERY frustrated and are very keen to waiting customers. PLEASE HELP ASAP!

  Janine Fugère
  As seen by Janine

  www.asseenbyjanine.com

  I solved the problem of Lightroom book Module 'impossible to contact the Blurb Web Service. Please check your internet connection. »

  With the help of telephone technical support of Adobe Lightroom, a very patient man named Himanshu helped me to discover what was causing this problem, after research on the issue and call me back. Nice touch Adobe! It was nice to be able to do other things while Himashu researched and consulted other technicians to find my solution.

  As very many other people have reported in the user forums, the problem is not that I have no Internet connection.

  The problem was caused by Windows 8 settings my PC of the user account, which had somehow the Internet settings that conflict with the Blurb since Lightroom download. Adobe Lightroom tech support person helped me to create a new user account, and I'm able to download successfully to Blurb from Lightroom under the new account. We have created a quick try test book and it works beautifully under the new user account.

  Don't know how this solution would translate to a MAC user (I read people with Mac computers, get the same download error), but I advise to check the settings of your Internet user account, regardless of the type of computer you are using.

  The minor glitch, I still is that my new Windows user account can not access my photo files (or any other file) from my old user account, even when I gave the new user account administrative access. I have a very large internal hard drive, so my photos & catalog are stored internally. Lightroom support advised me to contact Lenovo (the manufacturer of my computer) using transfer all my files from my original to the new user account that I just created. I will do it very soon.

  Meanwhile, my temporary workaround solution had to export my Lightroom Catalog and photos I'd need for this book on an external hard drive, so I could access it from the new user account. The my wedding guests book has been uploaded successfully to Blurb!

  I share so others with this problem by uploading from Lightroom on Blurb may also find that this solution works for them, too.

• Primavera EPPM 8.2 - report Module error

  Hello friends,
  
  I'm new to EPPM 8.2 and we just install EPPM 8.2. Now, when I log in via the Admin user ID, I am able to access and run reports. I created a new user and
  given the same permission admin, but with this ID (test), I am not able to access report Module. I get the error message like: "No Data is available because your P6 Username is not valid for connecting to The Reporting Database."
  
  I am enclosing pictures of error also. Could someone please guide me to get rid of this error? [http://tinypic.com/view.php?pic=2s17rb5 & s = 6]

  You have access to MoS? Doc contains the details.

  Here are some things to check
  1. you must give the user access to the 'Company reports' module to P6
  2. create user with the same name in BI Publisher and provide the access required in accordance with the Configuration Guide
  3. run schdeuled Global services
  4. check that you are able to run the reports to BI Publisher by using the new user and it is return data
  5. If the abve is true then check in P6 and if you still have the problem then bounce application server and repeat the test.

  I'm assuming you did P6 Admin configuration correctly

• Flex 4 Modules Error #1009

  Hi all

  I am upgrading my applications to flex 3 and flex 4.5 and has encountered an error. It occurred when a component has been added dynamically in a module. The codes that can simulate the error were extracted as below.

  TestError.mxml

  <?xml version="1.0" encoding="utf-8"?> 
  <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
       
       <mx:Script>
            <![CDATA[
                 import mx.events.ModuleEvent;
                 
                 protected function ml_readyHandler(event:ModuleEvent):void
                 {
                      trace("Module finished loading");
                      (ml.child as TestErrorModuleInterface).testTracing();
                 }
            ]]>
       </mx:Script>
       
       <mx:ModuleLoader id="ml" url="TestErrorModule.swf" ready="ml_readyHandler(event)"/>
       
  </mx:Application>
  

  TestErrorModule.mxml

  <?xml version="1.0" encoding="utf-8"?>
  <mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" 
               layout="absolute" width="100%" height="100%"
               implements="TestErrorModuleInterface">
       <mx:Canvas id="_box">
            <mx:Label text="HERE IS MY TEST MODULE" x="142" y="133"/>
       </mx:Canvas>
       
       <mx:Script>
            <![CDATA[
                 
                 public function testTracing():void
                 {
                      trace("This is a method in the Test Module");
                      var comp:TestErrorModuleComp = new TestErrorModuleComp();
                      _box.addChild(comp);
                 }
            ]]>
       </mx:Script>
       
  </mx:Module>
  

  TestErrorModuleInterface.as

  package
  {
       public interface TestErrorModuleInterface
       {
            function testTracing():void;
       }
  }
  

  TestErrorModuleComp.mxml

  <?xml version="1.0" encoding="utf-8"?>
  <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml">
       
       <mx:Label text="element" width="80" />
  
  </mx:Canvas>

  And it is detailed error stacktrace:

  TypeError: Error #1009: Cannot access a property or method of a null object reference.
       at TestErrorModule/testTracing()[F:\MyEclipse_9_0\workspace\ViSR_Interface_Flex4\flex_src\TestErrorModule.mxml:16]
       at TestError/ml_readyHandler()[F:\MyEclipse_9_0\workspace\ViSR_Interface_Flex4\flex_src\TestError.mxml:12]
       at TestError/__ml_ready()[F:\MyEclipse_9_0\workspace\ViSR_Interface_Flex4\flex_src\TestError.mxml:17]
       at flash.events::EventDispatcher/dispatchEventFunction()
       at flash.events::EventDispatcher/dispatchEvent()
       at mx.core::UIComponent/dispatchEvent()[E:\dev\hero_private\frameworks\projects\framework\src\mx\core\UIComponent.as:13128]
       at mx.modules::ModuleLoader/moduleReadyHandler()[E:\dev\hero_private\frameworks\projects\mx\src\mx\modules\ModuleLoader.as:465]
       at flash.events::EventDispatcher/dispatchEventFunction()
       at flash.events::EventDispatcher/dispatchEvent()
       at ModuleInfoProxy/moduleEventHandler()[E:\dev\hero_private\frameworks\projects\framework\src\mx\modules\ModuleManager.as:1149]
       at flash.events::EventDispatcher/dispatchEventFunction()
       at flash.events::EventDispatcher/dispatchEvent()
       at ModuleInfo/readyHandler()[E:\dev\hero_private\frameworks\projects\framework\src\mx\modules\ModuleManager.as:793]
       at flash.events::EventDispatcher/dispatchEventFunction()
       at flash.events::EventDispatcher/dispatchEvent()
       at mx.core::FlexModuleFactory/update()[E:\dev\hero_private\frameworks\projects\framework\src\mx\core\FlexModuleFactory.as:535]
       at mx.core::FlexModuleFactory/docFrameHandler()[E:\dev\hero_private\frameworks\projects\framework\src\mx\core\FlexModuleFactory.as:681]
       at mx.core::FlexModuleFactory/docFrameListener()[E:\dev\hero_private\frameworks\projects\framework\src\mx\core\FlexModuleFactory.as:131]
  

  Thank you very much!

  -Jingwei

  _Box is null?  It may not have been created yet.

• DASYLab Lite, CompactDAQ Ethernet, "the stream blocked by a later module" error

  I receive the message 'the stream blocked by a later module' and then the execution stops. I tried to remove the modules without change. He usually stops 8 minutes, 20 seconds (500) in the race. It happened on two different computers (same network, however). How can I get my program to run longer (forever?)?

  I am using a cDAQ NI 9188 (CompactDAQ Ethernet chassis), NI 9237 (strain gauge module), NI 9211 (thermocouple module), OR-DAQmx 9.5.1 and DASYLab Lite 12.00.01. My program of DASYLab affect strips from 100 Hz sampling frequency. The calculation of the average (reduce) block performs an average arithmetic with the size of the interval of 100 and a block size of output of 1.

  

  Thank you!

  Which module complains about being blocked? Look at the title bar of the message - it should show the name.

  You can observe the locking by turning on pre-trial block view-Animation-FIFO.

  I am suspicious that average organizes blocks more were awarded.

  One thing to try and really monitor your computer after doing this...

  Go to the Options menu in the spreadsheet view, then open the General preferences. Change these two settings - see the image - turning them off. The risk is that your application uses too much memory, so, please, provide oversight.

• Resource reserved with NI 9219 module error

  Hello

  I use the NI 9219 read 3 analog inputs (2 current and 1 tension).  I have a two VI for playback the output current of the pressure sensors and other for the thermocouple. When I run them at the same time I get error related to the reserved resource and data are read only. How can I remove this error and get data of the pressure transducers and the thermocouple at the same time. Thank you

  Sylvie

  Have you done a search for this error? This is a very common mistake. You must have all the measures in a single task.

• Qualcomm 3 G module error message "no signal available.

  I have Acer Aspire 1830 with inside Qualcomm 3 G module.

  After I insert the card GSM SIM, then I opened the Acer 3 G Connection Manager, but he says "No Signal available.

  I don't know why but in the Device Manager, 3 G Modul detected and all the drivers are installed. Then I see the configuration on the Acer 3 G Connection Manager and it fills the right APN, username and password etc...

  My OS is Windows 7 Home Premium 64 bit, my card SIM of Telkomsel Indonesia.

  Can someone help me? Thanks before.

  Usually, the 3G module is locked to a carrier in the region where it was sold.

  Acer does not provide additional support to change carriers.

• Book module: error text/fonts when recording

  Get an error while downloading them on Blurb or save as PDF on the desktop.  The error indicates a "textual error and the police ' everything and save the project in two places.  No choice, just don't give up.  Lightroom continues, but I can't successfully download on Blurb or save as PDF in Lightroom.  LR 5.7.1 on a PC with16GB of ram and 500 GB available storage on my HDD.

  My project is over 170 pages of images and text on the cover (with an image), the back cover (with a picture) and the last page of the book that was entirely text.  All used at different sizes of Arial text and that doesn't seem to affect the problem.  Neither the presence of text on the front and the back and the spine.  After scanning below the Forum I came across a question of I_AmTaterBug 13 Sep 2013 16:01 with the same problem.  After looking through the suggestions I tried to change fonts (without success) and finally replaced the one and only one page of text (the last page) and replaced by one that had an image and text.  I lifted the text on the previous page and pasted in the text portion of the new page.  Then I added an image to the other side of the page and retested.  Voila... no problem!  Maybe it was the last single page of text, but for some reason, he ran in PDF format and then upload to Blurb.