Monitor does not return after sleep.

Similar Questions

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• Monitor does not work after windows update failed

  After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?

  Starting in recovery system (from the Vista DVD) options and do a startup repair.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  If the startup repair does not resolve the problem, try other system recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• Monitor does not work after installing Windows 7.

  I have a Dell laptop with a Dell S1709W Flat Panel screen.  After replacing the Windows Vista came with the laptop for Windows 7, the monitor does not work.  The monitor said that he does not any signal from the computer.  The computer does not show that it has detected the monitor.  The monitor's cable and the connections are good.  What should I do to get the monitor to work?

  You have a graphic external connector for a secondary monitor, if yes attach it and then go to the Dell support web site and download Windows 7 drivers for your laptop model. Install the driver chipset first, then the driver graphics/video, network/LAN and drivers of the potential.

  If you do not have an external graphics connector, call Dell Tech support. They have a method to recover your system without losing data or applications.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Some applications does not respond after sleep (El Capitan)

  Product: 13 '' Macbook Pro retina (12.1) (base model sheet)

  El Capitan Version: 10.11.6

  The problem:

  When I connect after that my Macbook went down, I often have problems with some of the stock apps. In particular, I had this problem with the Mail Messages, reminders and calendar. This seems to be a problem when they are open before putting the macbook to sleep. This same problem happened with non-apple-stock applications.

  Once logged in, if I click on the application icon, the application window will come into focus. After that, I'm unable to use the application (as if frozen) and I often just see the spinning Rainbow mouse icon.

  Can I force quit the app and then open it again, but now the application does not load.

  To solve the problem, I can restart the macbook and all is well.

  Some others probably associated with funny things I saw (only attracted to this once... but did not look at one time or another):

  I open the calendar application after the macbook was sleeping and my full general calendar was empty (which would be nice if it were true!). In any case, I checked the 'accounts' and also found that there was no accounts! (I have 3 goes). So I wonder if there is a problem with the accounts after sleep since these apps I've had problems with all iCloud account and mail also uses some other accounts.

  Big Question: Is there something I can do to make that happen?

  Thank you very much for your help! Sorry if this is a double post, it is difficult to find an answer via google search.

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to Message, Mail, etc.

  If you still have problems, check the startup disk.

  Launch the disk utility located in/Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

• Qosmio G30-195 - infrared receiver does not work after sleep

  Hi all!

  I have a problem on my laptop after Exchange of service of the motherboard.
  Once I booted Windows (Microsoft eHome transceiver) IR receiver works well in all programs, but when the system resumes from sleep mode, the IR receiver unloads from memory and can not find the search for material.

  If the remote control does not work until I have to restart Windows. Windows XP SP2 and Windows XP MCE behave the same. Before the exchange of motherboard I didn't you have a problem.

  What can I do with this?

  > What can I do with this?
  Contact service again and tell them the same thing. They need to know why this happen.

  By the way: you can use other USB devices connected after waking from sleep mode?

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• DisplayPort monitor does not wake from sleep

  Hello

  just bought a Sapphire Radeon HD 7790 & realized, I could connect three monitors - yay.

  A few times the small monitor connected via displayport has not awoken from his sleep.  I have a beep as if remove the USB device.  The monitor power on / activate suits him.

  The two monitors connected with DVI awake without problem.

  I see threads referring to assign the displayport as the initial display adapter in the BIOS, but I don't see anything in the my BIOS (XPS 435MT) for graphics cards.  The GPU (I guess it's the GPU) set the dsiplayport as the monitor #1 monitor in the numbering system.  I understand that I have no control over this.  The attached DVI monitors are numbers 2 & 3.

  Carefully analyzed the logs of events during this time & can't find anything.

  Any help?

  Thank you

  Will update & reply to this message, I hope it helps someone else.  Apparently the TriXX is OK on the 7790.

  This YouTube video is my card:

  Video YouTube TriXX of Sapphire 7790 OC double-X

  If this does not work you can try changing the power settings in the BIOS - in my case, in the BIOS power management settings is not set to the sweetest sleep state.

  Right now the ACPI Suspend Type is S3 str:

  ACPI Suspend to RAM: ACPI stands for Advanced Configuration and Power Interface - that some people may find as options in their BIOS Setup programs. The Suspend to RAM, sometimes referred to as feature S3/STR, let the PC save more power in standby mode, but all the breast where the computer-related devices must comply with ACPI. Some BIOS have a S1/POS option for this scenario. If you enable this feature and you are having problems with the splash screen, just go back into the BIOS and disable. (not one of my options)

  Definition of ACPI to form of hunger more power to suspend for example s1 (POS) of power in standby mode could be the answer:

  S1: All processor caches are flushed, and the CPU stops the execution of the instructions. The power of the CPU and RAM is maintained. Devices that do not indicate that they must stay on can be turned off.

  S3: Commonly known as secondary, sleep or Suspend to RAM (STR). RAM remains powered.

• Monitor does not work after restoring update

  Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.

  Hi Chloe,.

  Thank you for the update.

  I understand that since the DVD burner does not work, you are not able to create installation media.

  Put a USB installation media option. You can use both links to download and create below

  Update Windows with only a product key

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Here are the steps:

  1. download and open the Setup file install Windows 8 Microsoft from the link above.
  2. Enter your product key of Windows 8 and start the download.
  3. once the download is complete, select install by creating media.
  4. Select the USB flash drive (it should be the default choice) and insert the USB key.
  5. accept all prompts to clear the contents of the USB key in order to start the process.

  

  

  

  

  

  Let us know if that helps. Keep us informed so that we can help you further if necessary.

• Satellite U940 - backlit keyboard does not work after sleep

  If my computer goes to sleep the light most of the time does not work. CTRL-Z is nothing.

  I have reset the values by default and still no luck. I need to reboot to get it to work again.

  I see it as one problem for others:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=70512

  Looks like you have created several post on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=71599
  Recommend to follow a thread to avoid misunderstandings.

• Tecra M5 does not return from sleep mode

  Sometimes my Tecra M5 won't wake up from sleep mode.
  The LCD does not turn, and hard drive works only for a second.
  I have for it to turn by pressing the power button / stop for a long time and then run again without my work that has not been saved.

  Other times I'm having problems with turning it off. Wondows disconnects and the PC is pending for a long time with LCD on - logging off XP screen.

  I have instaled videoprt.sys update and the latest BIOS 1.60

  Thanks for help.

  Hello

  I'm don't know if this will help, but try to install Microsoft Windows XP KB917332. You can find it on http://www.laptopvideo2go.com/drivers/ms_kbs/

  Please report the results!
  Good luck!

• XP toolbar based on the network not showing folder does not icons after sleep. Is it possible to "Refresh" w/o reboot? __

  I have a couple of toolbars (right-click Taskbar, toolbars, new toolbar), I created the network folders. More often than otherwise (used to not be that way a few years back) do not show the icons on the toolbar after the release of the standby mode. I can right click and choose "open folder" and reach the places I need as a work-around, but that beats the purpose of having the toolbar.

  I would like to have a way to refresh/reset the toolbar and have the icons without rebooting (or deletion / recreation). An hour or two, they made their reappearance - of course like to know what sequence of events caused that. Select / deselect the options to the right click (show the title, text, etc.) on the toolbar does not make the icons reappear.

  Hi swBytes,

  Try to create a mapped network share drive. Subsequently, you try to add the drive as a toolbar.

  Mapping a network drive

  How to connect and disconnect a network drive in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• keyboard does not work after sleep

  I have a light keyboard Logitech model Y-UY95. When the awakening of the mode standby the keyboard does not work.  Anything can be typed. I have to restart Windows 8 and then it works again.

  Had a similar problem on a HP Elitepad 900 go to sleep and not waking up... update the firmware/bios fixed it.  This known problem when I called HP, was not documented any wher however