More questions

Similar Questions

• (Redirected) doing a full install windows 7 pro sp1 64-bit on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...

  try to do a full install on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions...  I get all the features and everything all the way to the last step and everything, but then I think it will be a success, it doesn't say windows startup and let me down in me leaving with a blue screen no signal on my LCD 15 '... If someone would have an idea and would be kind enough and generous to help me as a fellow geek... I mean built my first computer, lived the whole 9 yards, but still cannot understand or resolve this situation... I would greatly appreciate any help of knowledge all my colleagues people could give... .i currently do not have a phone, but is will can always happen to me by message on his or [NOTE from the Admin: Email deleted in accordance with the TOU strategy identification], thank you for your time and also gratitude.

  Best of this post in the Forum OS from Microsoft here:

  http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx

  Bev.

• I applied the new OS update (1.3.1) but which only added more questions than I noticed (so far):

  I applied the new OS update (1.3.1) but which only added more questions than I noticed (so far):

  1 - the emails in my POP account that are deleted on my computer still appear in the Inbox of my pre until I delete them manually.

  2 - If you use my headphones, the ringtone is always routed through the main pregnant when someone calls - can be annoying!

  More to follow, I'm sure.

  I have the same problem.  I deleted previous messages from my list of conversions, and now the phone won't show new conversations with the same people that were started fresh.  I also noticed that when a person to send a message, the messages are appearing.  It is a mess!

• HP 10 more 2201 compressed: HP 10 more Questions

  I'm considering buying a Tablet Android 2201 HP 10 more. I know it's far from being the largest ever made tablet, but I can buy a refurbished for $100 unit delivered online, so it is, at this price, not a bad deal.

  I have two very basic... but really important... questions before I buy, and don't you know, I could not find DEFINITIVE answers to one online! It amazes me how vague and contradictory, information I could find. Even the own characteristics of HP and descriptions do not permanently. I suppose that if I spent a few days in search high and low, I'm able to find the answers after all. But, maybe someone here can provide the answers simple and direct, that I'm looking!

  1. the Tablet offers a HDMI video output (via its micro-USB connector)? I have read many responses... including half say 'yes' and the other half who say "no!"

  2. the operating system Android Kit Kat can be improved? I heard that the (4.4.2) version is one of the worst and buggiest version Android to date, so the upgrade could probably really improve the performance of the tablet.

  Any help (even a simple 'yes' or 'No' to one or both questions above, would be GREATLY appreciated.) BTW, the answers simply direct me to the specifications of manufacturers will not help because, as I said, they are NOT final!

  I hope that someone who actually has one of them and it connects to a TV HDMI will be able to answer, or let me know if the 'casting' video (via Chromecast) is a satisfactory alternative method to feed the video and audio to an HDMI TV. I want to watch downloaded movies (files MP4 or AVI using the VLC Android software), and it would be the main use for the Tablet!

  Thans in advance to anyone who can help!

  Hello and welcome to the HP support community!

  1. I have a HP 10 Plus, model 2201.  It has a dedicated micro-HDMI output port.  It does not use the USB port for the video.

  I'm happy to use it with a ChromeCast (or a fire stick Amazon), and many prefer to control the diet of my couch that physically attach the tablet on television.

  2 HP did not provide a way to evolve past 4.4.2.   The operating system works well for me, don't know what questions you read everything!

  It has worked very well on a recent trip to Hawaii.  I used it to download all my images of drone of Kaua'i.  A took a micro SD card out of the GoPro and inserted in 10 more, then uploaded via wifi.

  HTH,

  WyreNut

• AnyConnect VPN Mobile disabled 5505 SEC no more questions

  Hi all

  I have a 5505-SEC-BUN-K9, must purchase a license of Mobile Anyconnect vpn.

  For the question now, I was able to active the anyconnect for mobile but the sec as well as features all failed. How can I check the question?

  The devices allowed for this platform:
  The maximum physical Interfaces: 8 perpetual
  VLAN: 20 unrestricted DMZ
  Double ISP: Activated perpetual
  VLAN Trunk Ports: 8 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active / standby perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: 25 perpetual
  Counterparts in other VPNS: 25 perpetual
  Total VPN counterparts: 25 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: 76 days allowed
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual
  Cluster: Disabled perpetual
   
  Internal guests: 10
  Failover: disabled
  Encryption - A: enabled
  Encryption-3DES-AES: enabled
  Security contexts: by default
  GTP/GPRS: disabled
  Premium AnyConnect peers: by default
  Other VPN peers: by default
  Assessment of Advanced endpoint: disabled
  AnyConnect for Mobile: enabled
  AnyConnect Cisco VPN phone: disabled
  Shared license Premium AnyConnect server: disabled
  Sharing license: disabled
  Proxy sessions for the UC phone: by default
  Total number of Sessions of Proxy UC: default
  AnyConnect Essentials: enabled
  Botnet traffic filter: disabled
  Intercompany media engine: disabled
  Cluster license: disabled

  Have you tried to re-apply your activation key for the license of security more?

  If you don't have it available, you may need to open a TAC case to get worldwide license team to regenerate it for you.

• isn't 90% more questions from the actual training?

  Several years ago I had an instructor (Chinese leader) who was in charge of the certification test,

  and she said that most of the test questions is from dishes of course.

  It allows to actually take the course.

  Many Oracle certification tests (not all) have one or more Oracle University courses that match very closely the subjects that will be tested.  In these cases, the course of the ORGANIZATIONAL unit is a great way to prepare for the exam.  There is certainly no fixed percentage (90% or other) of the exam questions which can respond by using the material presented in the course.

  For tests where these exam-course correlations exist, I think that there is at least some degree of direct liaison between the two.  OR developing tutorials and reviews - people doing this development perhaps in some cases.  Even if developers review certainly not access o material of course and probably vice versa.

• More Question

  Hello, a couple of days, I bought PS Elements 8 download. Today, I talked myself into the upgrade to 8 items PS Plus and gave them $49.00, assuming that the software would change. As of now, it doesn't seem like there is a change, but I noticed that online storage has increased from 2 gig of 20 gig. In my account manager, I see the download for 8 items, but no to plu product download. I guess my question would be of fact I have buy more or just extend my storage space? If there is more that how to make the benefit more? Is this something that comes more servers or what. I'm sorry if I'm misinformed, but it's really not clear what I bought. Thank you in advance if someone could clear up this place for me before I spend hours trying to figure that I don't know the software well enough to notice a potential change.

  , but I noticed that online storage has increased from 2 gig of 20 gig

  It's really what you should see, however, and the fact that you can now download the things added in the content panel that has Gold banners above, so I don't know what else you think that you are missing?

• SQL MORE QUESTIONS

  According to the tables and the attributes below, I need solve 25 questions. I answered some of them and some of them I couldn't solve. I need your help please.
  
  School (sch_name, sch_phone, sch_code, sch_dean)
  Advisor (adv_code, adv_fname, adv_lname, adv_phone, sch_code)
  Major (maj_code, maj_desc, sch_code)
  maj_adv (maj_code, adv_code)
  student (std_code, std_lname, std_fname, std_gend, maj_code, std_dob)
  rank (std_code, gr_lname, gr_fname, gr_t1, gr_t2, gr_hw, gr_pr)
  
  
  create table school
  (sch_code varchar2 (8) school_sch_code_pk primary key constraint,)
  sch_name varchar2 (50).
  sch_phone varchar2 (12),
  sch_dean varchar2 (20));
  
  insert into the values of the school ('BUS', "School of Business", 281-283-3100', 'Ted Cummings');
  insert into the values of the school ("EDU", «School of Education», 281-283-3600', "Dennis Spuck");
  insert into the values of the school ("MSM", "School letters" and Human Sciences, ' 281-283-3333', "Bruce Palmer");
  insert into the values of the school ('DRY', 'school of Science and engineering', ' 281-283-3700', "Sadegh Davari");
  
  create table Advisor
  (adv_code varchar2 (08) advisor_adv_code_pk primary key constraint,)
  adv_lname varchar2 (15).
  adv_fname varchar2 (15).
  adv_phone varchar2 (12),
  sch_code varchar2 (8) constraint advisor_sch_code_fk references school (sch_code));
  
  insert into portfolioadvisor ('A1', 'Porter', 'Mattie', ' 281-283-3163', 'BUS');
  insert into portfolioadvisor ("A2", "Grady", "Lost", 281-283-3400', 'BUS');
  insert into portfolioadvisor ("A3", "Tran", "Van", 281-283-3203', 'BUS');
  insert into portfolioadvisor ('A4', 'Sale', 'Nili', 281-283-3202', 'BUS');
  insert into portfolioadvisor ("A5", "Kwok-good', 'Yue', 281-283-3864', 'SEC');
  insert into portfolioadvisor ("A6", "Jones", "Lisa", ' 281-283-3551', "EDU");
  insert into portfolioadvisor ("A7", "Palmer", "Bruce", 281-283-3445', "MSM");
  
  
  create major table
  (maj_code varchar2 (10) major_maj_code_pk primary key constraint,)
  maj_desc varchar2 (30),
  sch_code varchar2 (8) constraint major_sch_code_fk references school (sch_code));
  
  insert into large values ('ACCT', 'Accounting', 'BUS');
  insert into the great values ('Ministers', 'Finance', 'BUS');
  insert into large values ("ISAM", 'Management Information systems', 'BUS');
  insert into large values ('SMK', 'Computer Science', 'DRY');
  insert into large values ('HIST', 'History', "MSM");
  insert into large values ("INST", "Instructional Technology", "EDU");
  
  create the table maj_adv
  (maj_code varchar2 (10) constraint maj_adv_maj_code_fk main references (maj_code),)
  adv_code varchar2 (08) constraint maj_adv_adv_code_fk references Advisor (adv_code).
  constraint maj_adv_maj_code_adv_code_cpk primary key (maj_code, adv_code));
  
  insert into maj_adv values ('ACCT', 'A1');
  insert into maj_adv values ("ACCT", "A2");
  insert into maj_adv values ("Ministers", "A2");
  insert into maj_adv values ("ISAM", "A3");
  insert into maj_adv values ("ISAM", "A4");
  insert into maj_adv values ("CSCI", "A5");
  insert into maj_adv values ("INST", "A6");
  insert into maj_adv values ("HIST", "A7");
  
  
  create table students
  (std_code, varchar2 (9))
  std_lname varchar2 (15) constraint student_std_lname_nn not null,
  std_fname varchar2 (15) constraint student_std_fname_nn not null,
  std_gend varchar2 (8).
  maj_code varchar2 (10) constraint student_maj_code1_fk main references (maj_code).
  date of std_dob,
  constraint student_std_code_pk primary key (std_code));
  
  insert into student values ('S1', 'Jordan', 'Michael', 'F' 'Ministers', to_date (10 March 1962 ',' Mon-DD-YYYY ""));
  insert into student values ('S2', 'Barkley', 'Charles, m', null, to_date ('12-Sept-1964, ' Mon-DD-YYYY ""));
  insert into student values ('S3 ', 'Johnson', 'Magic', am ', 'ACCT', to_date ('13-Sep-1960, ' Mon-DD-YYYY ""));
  insert into values student ("S4", "Williams', 'Serena', 'F', 'ISAM', to_date (October 23, 1980 ',' Mon-DD-YYYY" "));
  insert into student values ('S5', 'Duncan', 'Tim', am', 'ISAM', to_date (August 7, 1972 ',' Mon-DD-YYYY'));
  insert into values student ("S6", "Graff", 'Steffi', 'F', 'SMK', to_date (30 April 1962 ',' Mon-DD-YYYY ""));
  insert into values student ("S7", "Navratilova", "Martina", 'F', 'ACCT', to_date (18 December 1972 ',' Mon-DD-YYYY ""));
  
  NOTE Insert student (std_lname, std_fname, std_code, std_dob)
  NOTE values ('S2', 'Barkley', 'Charles', to_date('12-Sep-1964','DD-Mon-YYYY'));
  
  create the table class
  (std_code varchar2 (9) grade_std_code_pk primary key constraint)
  constraint grade_std_code_fk references student (std_code).
  gr_lname varchar2 (15) constraint grade_gr_lname_nn not null,
  gr_fname varchar2 (15) constraint grade_gr_fname_nn not null,
  gr_t1 number (5), constraint grade_gr_t1_cc check (gr_t1 between 0 and 100).
  gr_t2 number (5),
  gr_hw number (5),
  gr_pr number (5));
  
  insert into rank values ('S1', 'Jordan', 'Michael', 90, 80, 98, 90);
  insert into rank values ('S2', 'Barkley', 'Charles', 60, 100, 100, 60);
  insert into rank values ('S3', 'Johnson', 'Magic', 88, 98, 96, 98);
  insert into rank values ("S4", "Williams", "Serena", 92, 92, 92, 92);
  insert into rank values ('S5', 'Duncan', 'Tim', 90, 94, 94, 96);
  insert into rank values ("S6", "Graffiti", "Steffi", 80, 83, 84, 72);
  insert into category values ("S7", "Navratilova", "Martina", 91, 88, 94, 95);
  
  the questions are:
  
  Give the following commands:
  
  1 the names of students who do not have a large.
  2 display the names of the students whose name has two "o" inside.
  3 the names of the students whose first name has an "e" in it.
  4 the names of the students whose name has exactly five characters in there.
  5 the names of students with higher test grade 2 test 1 grade.
  6 the names of pupils with grade of the project between trials 1 and 2 test classes.
  7. give the name of the student whose name begins with the character 'B' or who have never transformed into working from home.
  8. give the command that will appear two columns and one record. The first column will have the title "Major" and "ACCT" as value. The second column will have the title of 'MIS_Count' and will display the number of advisors of accounting.
  9 display the name of the student whose test 1 score is higher than the average on test 1.
  10. give the names and surname of the students who scored above average on test 1, as well as above average on the test # 2.
  11 show the date variable system using the double table.
  12. show the date variable system using the table of quality ensuring that the date is displayed only once.
  13. give the name of the student who is the oldest student and scored highest on the first try.
  14 list different majors and number of advisors for these majors.
  15 show the names of students who do not quality for any element.
  16 show the names of students who do not have at least one element.
  17 the names of students who have the same major as 'Michael Jordan'.
  18. give the names of the students whose average on test 1 and test 2 is higher than the average on the homework and project.
  19 display name and the average of the test 1 and 2 test for each student.
  20 display the number of students in the student table using three different methods.
  21. view student numbers in the table of student accountants.
  22 display the number of students of accounting and finance in the student table.
  23 show the average on the test 1 and 2 test for female students.
  24 show the number of students of accounting and finance including test 1 grades are above average on test 1.
  25 display the name of the major that has more than two students.
  
  I'm stuck with the following questions (1,12,13, 15,16,17,24) and the rest, I finished them but I'm not sure.
  Thank you and looking forward to hear your suggestions.

  Hi and welcome to the forum!

  This looks like a duty for me to be perfectly honest. When it's people are usually not willing to spoon feed answers because is not helping improve learning.

  I'll try to help if you can show me what you have tried for the issues that you are having problems with.

  Thank you!

• Quick Fix for more questions to eFax (Photosmart 7510 & Envy 110/114)

  Problems resolved by the patch:

  
  

  • Cannot send eFaxes
  • Cannot receive eFaxes
  • Cannot connect to the eFax on the front panel of the printer.
  • Cannot save eFax on the front panel of the printer.
  • Trying to access with eFax, it says that the printer is not connected wireless.
  • Trying to access with eFax, it asks that you activate web services before continuing.

  The fix:

  
  

  First, press the ePrint button in the upper left corner of the screen to your printer to access the menu of Web Services.

  Once there, press the button "settings".

  If printing is turned on, turn it off and then back on. Press the return key, then press 'Print the State'.

  If ePrint is off, turn it on. Press the return key, then press 'Print the State'.

  These steps may seem strange given that the problem is with eFax and eFax works on printing via ePrint service.

  If this fix does not work for all of the questions listed above, the problem is probably related to something else. Let me know what problem you are having in this thread and I will do everything I can to get all this work for you.

• More questions about custom asynchronous device

  I am trying to create a custom asynchronous device for VeriStand and have the following questions:

  (a) at what rate entered in the course of analysis and data channel pushed into the FIFO of the custom device entry? The scanning speed depends on if the input channel is mapped to a control of workspace object or if it is mapped to an output of the simulation model (.dll file)?

  (b) at what rate the VI real-time asynchronous custome device running? Is it at the same rate as the primary control loop rate? Can I change the rate of implementation of a custom device and how?

  (c) I have a quad-core PXI time real platform. How can I connect the device customized to a specific processor, like what you do with a simulation model (.dll file) in the definition of system file?

  Thank you in advance.

  Data FIFO

  The rate at which data are pumped on your meter is static and has nothing to do with the question of whether the workspace is connected, or if a model is mapped to one of your channels. By default, data are pushed in input of your Custom FIFO each iteration of the loop of primary control. If the FIFO is full, the oldest data packet is crushed. In addition, by default, outings THAT FIFO is controlled ever iteration of the loop of primary control. You can, however, use the NI VeriStand - Set custom decimation of device to mark a property on your customized device that will tell the system its decimation expected in the. If you set a decimation of 10, for example, the primary control loop will be send every 10 iterations of new data and check for new data out FIFO only every 10 iterations. This can help reduce the load of the processor in your system if you do not need updates that often.

  Similarly, you can use the NI VeriStand - Set of deep FIFO to control the depths of the FIFO of your entries and exits FIFO respectively. By default, both have depth 1.

  Delivery rate

  The rate at which your custom device runs depends on how set you up. You can for example, having your Custom asynchronous device uses its own schedule and run at a pace totally independent of the system. Your VI could have regular while loop with a 10ms timer, for example, or it could be based off some hardware device timing.

  Alternatively, you can choose yourself closely synchronize with the primary control loop. This by registering using a property that your Custom device has a timed loop that will use the clock of the device. The unit's clock is a source of synchronization that is checked each iteration of the loop of primary regulation after Custom peripheral FIFO have been updated. You sign up for this simply by calling the NI VeriStand - Set loop property Type specifying Timed loop to loop type and use peripheral clock be true. Then, as the VI model, thread just the clock of the camera in your calendar input source for the timed loop. If you have specified a decimation factor, as mentioned above, you should probably also to use this factor as your dt. This means that if you have a decimation of 10, you only run your timed loop 10 all the graduations of the source of synchronization clock of the device.

  Another simple way to synchronize closely with the primary control with a few problems loop is simply base your timing off the coast of the availability of new data in your entries or exits FIFO. To do this, you can simply use regularly to loop and then just wire - 1 for FIFO wait times. Then your custom device will run as soon as the data are produced and consumed by the system.

  Specification of a processor

  There is no property integrated for the allocation of the processor, but it will be very easy for you to implement yourself. You can specify the processor to run on in the Explorer system by creating a custom using NI VeriStand - property set the property of the element. For example, you could define a property of I32 entitled 'Treatment', with-2 meaning auto-affectation and any non-negative value indicating an index of specific processor. Set this property in one of your device in System Explorer configuration pages and then read the property in VI of pilot in the engine using NI VeriStand - get the property of the element. Then just wire up the value of the property at the entrance of affinity processor on your timed loop. However, you should always check that this processor is on target. Otherwise the timed loop will report an error and abort. It's exactly what we do for models in-house.

• More questions about registration of the plugin on a Production Server package

  I tried to review other messages (as well as the documentation for VMware) regarding the plugins installation/registration on [the customer] production servers.  Specifically, I was looking at this recent announcement:

  https://communities.VMware.com/message/2292717

  The following response was a very good point, but I was looking for a little more in detail about how other developers are doing this installation/registration:

  laurentsd: as a plugin developer, you are responsible to write an installer that customers will run to register your plugin package. You do not want to treat to run a java program directly :-)  The installation program should be easy to use.

  I was curious to know how many people have their customers to install a Web Client plugin.

  The States of doc SDK - Tutorial.html in the 'record of your plugin...» "article for the mode of production (step 1), you can:"

  Use a script program or installer to create the object of Extension data programmatically and enter this data object using the ExtensionManager.registerExtension method

  This means that the .zip file must be placed on a server access with HTTPS access.

  [Variant 1]: are most of the people having the client stores the .zip file in a HTTPS server in the customer environment?  If Yes, then I guess that the installer prompts the user to specify the URL to the zip file, which is then rolled into the Extension data' things "programmatically.

  [Variant 2]: or, most people hold their own on their own server HTTPS .zip file by using an installation program with hard coded URL value in the .zip file, and having the user simply launch the installer without entering any additional data?

  Or maybe there is an Option of [3] that I have not yet thought?

  It seems that [option2] is obviously easier for the customer, but makes it harder to make a plugin that everyone has access to.  [Variant 1] requires a bit of work for the customer, but allows the developer to restrict access to the plugin for customers who have paid for the product.  Certainly the installer can block based on the license key, but anyone with some knowledge of vSphere Client Web plugins as well as documentation 'Save your plugin package' could take a plugin .zip file and install it manually without an official Installer (when the .zip is hosted to the public).

  You must take the URL of the ZIP file as an input for your script so that all options can be supported. If the zip file is hosted in the customer environment, then the URL should point to that. If you host the zip file on your own server, then the URL should point to your server.

  You should code hard not URL that you have mentioned in the #2 option, because there are several companies and agencies Government which do not allow to connect outside of their network.

• SQL * more question: unprinted despite SET ECHO ON command

  RDBMS Version: 11.2.0.4

  OS: Oracle Linux 6.4 (bash shell)

  I'm kinda a newbie to SQL * more.

  Here's a SQL * Plus script embedded in bash script that scales multiple data files. This script has been run on the DB server side.

  #! / bin/bash

  export ORACLE_SID = ORCL1

  echo "resize Datafile began to" 'date '.

  sqlplus "/ as sysdba" < < EOF

  set echo on

  Set of feedback on

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.338.834340223' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.337.834340223' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.336.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.335.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.334.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.333.834340225' resize 25g;

  ALTER DATABASE DATAFILE '+ DATA/brfcsprd/datafile/manh_audit_lob.332.834340227' resize 25g;

  quit smoking

  EXPRESSIONS OF FOLKLORE

  echo "resize Datafile ended in" 'date '.

  As you can see, the SQL * more script contains ON SET ECHO ON and PUT your COMMENTS.

  But in the logfile (see below), I don't see every ALTER DATABASE DATAFILE... command printing. I see that ' altered database.'  printing messages.

  I executed the script to nohup as

  nohup resize.sh > MyResize2.log &

  $ cat MyResize2.log

  DataFile resize started at Sun Dec 29 00:09:45 MYT 2013

  SQL * more: Production of the 11.2.0.4.0 on Sun Dec 29 00:09:45 version 2013

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With partitioning, Real Application Clusters, Automatic Storage Management, OLAP,.

  Options of Data Mining and Real Application Testing

  SQL > SQL > SQL > SQL > SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  SQL >

  Database altered.

  Hello

  ECHO applies only to the SQL commands * Plus reads through the @ or the STARTUP command, no statements you type directly in the SQL > prompt or read the bash script statements.

  Try to create a separate file, containing only the command ALTER DATABASE in a separate file (let's call it alter_database.sql for now) and call it from your script bash, like this:

  #! / bin/bash

  export ORACLE_SID = ORCL1

  echo "resize Datafile began to" 'date '.

  sqlplus "/ as sysdba".<>

  set echo on

  Set of feedback on

  @whatever/alter_database

  quit smoking

  EXPRESSIONS OF FOLKLORE

  echo "resize Datafile ended in" 'date '.

• More question of trace

  Hello
  Is my version of db: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  
  I was getting this error:

  SQL> set autotrace on
  SP2-0618: Cannot find the Session Identifier.  Check PLUSTRACE role is enabled
  SP2-0611: Error enabling STATISTICS report

  So I googled and followed this link step by step

  Question about AUTOTRACE, SP2-0618 and SP2-0611

  But then I ran into the following situation

  SQL> drop user def cascade;
  
  User dropped.
  
  Enter user-name: abc
  Enter password:
  
  SQL> @/opt/Oracle/111/sqlplus/admin/plustrce.sql
  SQL> drop role plustrace;
  
  Role dropped.
  
  SQL> create role plustrace;
  
  Role created.
  
  SQL>
  SQL> grant select on v_$sesstat to plustrace;
  grant select on v_$sesstat to plustrace
                  *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  
  SQL> grant select on v_$statname to plustrace;
  grant select on v_$statname to plustrace
                  *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  
  SQL> grant select on v_$mystat to plustrace;
  grant select on v_$mystat to plustrace
                  *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  
  SQL> grant plustrace to dba with admin option;
  
  Grant succeeded.
  
  SQL>
  SQL> set echo off

  Because they say the table or view does not exist, I did the following:

  SQL> desc v$sesstat;
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   SID                                                NUMBER
   STATISTIC#                                         NUMBER
   VALUE                                              NUMBER
  
  SQL> grant select on v_$sesstat to plustrace;
  grant select on v_$sesstat to plustrace
                  *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  SQL> select * from v$sesstat
    2  where rownum < 2;
  
         SID STATISTIC#      VALUE
  ---------- ---------- ----------
           1          0          0

  I think I have the tables, but at the same time it is said table does not exist. I don't understand.
  Please advice.
  
  Published by: 934451 on March 20, 2013 07:51
  
  Published by: 934451 on March 20, 2013 07:53

  I think you must be having 'sysdba' privileges to grant on v_$ sesstat.

  I just tested and yes it must be sys in order to give grant on v_$ sesstat.

  Published by: TSharma on March 20, 2013 11:04

• More question of 2 TB LUN.

  Currently I have a NetApp FAS2040A connected through HBA. I created the LUN 8TB on the device and introduced him to ESXi, but the ESXi has a limit on the VMFS 2 TB. I need to present a LUN to VM 8TB runs a Win 2008 R2. What is the best way to do it without losing too much performance and risk data loss. Some of the ideas of mine are as follows:

  (1) create a LUN VMFS TB of 4 x 2 and use the dynamic disk in Windows to create a partition of 8 TB

  (2) 2 TB LUN to create and use extensions ESXi to bring this volume to 8TB

  (3) a licence to CIFS and create the 8TB on the device

  I'm new to the ESXi fearly please bare with me. I'm looking for the best suggestions or the ups and downs on the above scenarios.

  Thank you for your help.

  Even if you create a store of data from more than 2 TB virtual disks are always limited to 2 TB.  If you need to present 8TB to the VM, then your best option would be to configure the computer virtual to connect directly to the 8TB LUN using the MS iSCSI initiator software.

• More question of the duration of the video/Audio output

  NOTE: (Sync = Sync, however spelt).

  Hello

  I had a problem with almost all Blu - ray discs in yet that I've only just noticed (my friend at work identified for me). If I say a disc with 4 videos of each to 20mins each (just for example), it seems at least video tracks suffer from this problem as listed below:

  The problem:

  The video and audio are out of sync over another, or so it appears on the surface, after looking for a solution to this problem myself or generally to research what was going on, I noticed tracks begin as usual but that I tested it myself (as the worst for bugs ironically) appeared what was going on. The video track, I checked was around 25mins (and x number of seconds) just by browsing the disc but I noticed the stream BD was a time of 32minutes game, clearly 7minutes longer than the original source file, then why is it? Well, after an hour or 2 of re - look at the content, I noticed this video track sometimes looping backwards (just one time) in seconds, so when playing for example, video and audio popular lets say 03:57 play time and then the video will be back jump for example 03:46 while the audio continues to play in what should be normal. Even then seems to keep the entire video so the tracks are not overwrite the original but in addition to the track that extends the length of the video.

  That has not been explained probably well so in short, the video seems to go back a few seconds during playback (when the product) while the audio continues on normally, not only put the tracks out of sync and extend the video length of 25mins to 32.

  Apparently this has been consistent in just about every disc I've done, it is common only in one of the video tracks although some what happened to it most.

  The job well files source before entering again, I usually have them in mp4 because I have always worked with mp4 to work and it is easier for this kind of stuff (for me personally), they have the same parameter coded before entering again and then in again. The source of the videos play fine before never be affected by the recall and have no problem.

  Seems to be something happening on the output Ecore.

  Any idea what could be the cause? Although I doubt it has much to do with the encoding in all encoding settings are by default (if I remember correctly).

  I have practically lost over 30 discs BD on it now without realizing and could be much more if I had not noticed, could really do with help here as im stuck in what could cause video to not only jumpback once track from time to time but create 7mins extra video length making of the thought.

  This could be a problem of variable capture frame rate. First like either variable frame rates. Good luck.