Motherboard has preferred memory sticks?

So I admit my desktop PC HP Compaq dc7100 is a bit old, but it will do everything I want to do if I could just get over a GB of ram in the thing to work.  I had with two sticks of 512 s (Hp brand) and I bought more ram to go with them.  None of the ram, I buy, which seem to me to have everything in common with the original sticks that are important, does not work in the computer.  Even when I remove the originals and put the new ones it gives me error emits a beep and not dΘmarre.  The only way that my computer works is with the original ram and only orignial ram.  It's weird.  As I said, everything I'm doing is getting a little more speed from gig a bum of ram.  What could be stopping the motherboard to the 'exotic ddr ram '?  Thanks in advance!

Hello

Based on the following link, it supports up to 4 GB:

http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?prodSeriesId=410112&ObjectID=c00229814

You must buy the good RAM to work and must be non - ECC RAM as shown in the link above.

The foloing manual can help:

http://h10032.www1.HP.com/CTG/manual/c00283274.PDF

Kind regards.

Tags: HP Desktops

Similar Questions

  • F10: Memory stick reader has stopped reading

    My drive stick of memory used to read the memory stick, once I put it in my F10. However, now when I put it in the system kind of freezes and does not do anything to be in the drive, even if it appears in my computer as a removable disk.

    Also oddly it won't read my camera when I connect it via USB when the memory stick is in the camera? When I put in a different memory stick he reads very well.

    Can he explain this mysetery?

    Hello

    Your ad make me a bit confused.
    What do you mean by memory stick? Did you mean an SD card or a USB key?
    I don't know if it your case, but it is possible that this means of communication has a failure of m.

    Once I tried to use a broken SD card and each time after having plugged the card froze my laptop. This medium was blame for it.

  • Multi-card reader don't like to give back the cards Memory Stick Duo Pro 23 Pavilion all-in-one

    I want to just make sure I don't do something wrong.

    When I plug it into a SD card seats when inserted about 2/3 of the way into the slot and I can easily put my fingers on it to remove it when it's time to take it out.  When I plug the Memory Stick Duo Pro that is not recognized until it is at least inserted 9/10 and I can push completely rinse with a case and am not sure that it has bottomed out or not.  It works fine, but now it is not removable without the use of pliers tweezers.

    Is this normal behavior and waited for the mult card reader integrated into 23 all-in-one Pavilion?

    I have a more than adequate solution.  I plugged in the little USB card reader that accepts MS Pro Duo in their own homes. This post is therefore more closely to ensure that I'm not missing something obvious.

    My guess is that the drive or the motherboard was designed for the case to be a little closer it is.

    Hello @MarksPavilion,

    I understand that you have problems, remove the Memory Stick Duo Pro card reader that he will not jump out far enough to catch. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

    I want to thank you for display on the HP Forums. Have a great day!

  • BIOS reports that node NUMBER 1 has no memory during installation VMVisor - 4.1 on ASUS KGPE-D16

    Hello

    I try to install vSphere Hypervisor (ESXi) 4.1 on a newly built server and during the installation process, I get the following error message:

    The BIOS reports that node NUMBER 1 has no memory. This problem is caused by either a bad BIOS or a very skewed distribution of modules of memory.

    Here's my server details

    Motherboard - ASUS KGPE-D14 socket 34

    Processor: AMD Opteron 6128, 2 GHz

    Memory - Kingston 2 X 4 GB

    Currently I use a single processor and 8 GB of memory (4 GB each two locations) and do not install another CPU or add additional memory to the same problem of NUMA. I went through all the articles from vmware regarding this issue and there is no luck so far. Please help me how I can solve this problem and get further.

    Thank you

    Praveen

    You have the RAM installed in what locations? If you use a CPU, I think that you need a stick in the first slot of orange, ignore the following location Orange and install the second stick in the third slot orange.

  • Satellite R20 - Memory Stick PRO Duo problem

    I looked and saw a lot of similar posts from users with a similar problem. Unfortunately, most of the answers suggested by looking at the user manual and taking note that the phone does not support the Memory Stick PRO Duo. Technically, that's true. However, many Sony cameras come with an adapter that turns the PRO Duo stick a Memory Stick PRO. These include very well in Flash Media Bridge adapter. The manual also indicates that the drive supports this stick.

    What's weird, is that Windows Vista recognizes the insertion of the memory stick, but he then told me that I need to format it before so I can use it. I don't remember what I used the term, but there was a time eventually (with an older driver and/or the installation of XP?) when I could operate using a tip of reboot or something. No, however, I get boor. The stick (and its adapter) work very well. I can read it using another USB adapter. (Connected to my dell monitor 24 "... so not exactly a portable solution)

    My laptop is the Satellite R20 Tablet and my OS is Vista Business

    Thanks in advance for your help.

    -Michael

    Duo cards have been gradually were they not? I'm sure that the Duo do not support Toshiba laptops. The only solution is a USB adapter, preferably a compact.

  • create a bootdisk on a memory stick

    I would like to create a bootable disk or a disk image on a stick of memory from 32 GB to be used as a startup. I buy a new Mac, iMac or a Macbook. I would like to know the migration process only certain apps and files, for example, what is the actual method. I don't want to clutter the new mac with everything I don't want to use in this regard. I migrated from a Mac to a newer version before, but it was the disc that only moved problems as well.

    Thank you

    32 GB memory stick.  You can install a bootable using Diskmaker X Installer

    <http://liondiskmaker.com>

    Or you can install an OS X on it.  But you can not install this copy, except by cloning on another disk using something like Carbon Copy Cloner, SuperDuper or disk-> utility restore.

    You are in the forum Lion, so I should mention that if you buy a new Mac, it will come with El Capitan, and the new system will work NOT Lion.

    Applications-> utilities-> Migration Assistant to transfer selected data classes, but it is not very well underseeded.

    You can drag and drop some of your applications and data (assuming that the Applications do not store things in other folders).  Some things, like your email, browser bookmarks, backup iPhone, application preferences, etc... are in your folder-> library (Finder-> go-> (hold down Option Key)-> library).

    It may be best to simply re - install all the apps.

    You can use a utility such as Carbon Copy Cloner to transfer data.  He has the ability to transfer selected files, as well as all the property and the attributes of the file.

    Better to keep a full backup of your current system so that you can go back and get things you forgot.

  • Satellite T130: 5-in-1 Bridge Media Slot - how to use the Memory Stick?

    Hi all

    My T130 has a bridge 5-in-1 Media Slot for SD card / Memory Stick / Memory Stick Pro / MultiMedia Card and xD-Picture Card.

    But how it should work with a Memory Stick? Its smaller SD card and just fall into the slot (no klick and no contact - and no easy way to get it out with your fingers).

    Do need me an adapter for this (mentioned nowhere in the manual)?

    On my old Sony Vaio, I have two slots, SD and Memory Stick - but how should this work with one slot on T130?

    > But how it should work with a Memory Stick? Its smaller SD card and just fall into the slot (no klick and no contact - and no easy way to get it out with your fingers).

    Need an adapter for the Memory Stick!

    Notes; You can use only Memory Stick 128 MB and 256 MB.

    Welcome them

  • Memory stick is not recognized bySatellite one

    Hello

    I m quite a novice to the problem I have is that the laptop won t recognize any memory sticks when a scan has been made, he said that there was a lack or outside date driver but I don't know which

    If someone has experienced this problem and is at - it an easy way to fix it?

    Thanks in advance.

    If you want to discuss these problems you must provide some basic information such as the model of laptop and operating system preinstalled.
    Can you please tell us what memory card do you use?

    Memory card reader installed and listed correctly in the Device Manager?

  • OS = slow download of memory stick update. Why?

    I have a Macbook Pro 2010 with two USB 2.0 ports. I have been using a Lexar 16 G memory stick 2.0 to save Word files and number. I recently updated my OS of 10.6 to 10.11. Since the upgrade, the Lexar takes much longer to download and a few times, has not answered the command "Eject Lexar".  I'm curious to know why this is happening.

    try using disk utility to repair the USB key.

  • Qosmio F30 - 141 Memory Stick DUO / card reader problem

    I have a problem with the Memory Stick Duo Adapter/Memory stick PRO DUO card.
    Computer does not recognize volume. Unit Memory Stick appear in the system, but when I click on it in the Solution Explorer, computer say "insert the disk in drive E". I have the original card Memory Stick PRO DUO 2 gb and MS Duo adapter. 30 sec computer try plug this card.

    Computer properly operate with the Memory Stick Pro 1 GB card and Memory Stick M2 card 1 Gb with adapter M2.
    all this work cards in my Photo and on another computer.
    I am trying to connect this card to Sandisk 6 in 1 adapter PCMCIA, but in this case, no one card works.
    This device appear in IDE ATA/ATAPI controllers like '___Memory_Card_Adapter_II', but the driver for this device is not installed (KODe 28).

    Thanks for the wonderful world of the internet for this info:
    F30-141 does not support memory stick pro duo and adapters has not been tested.
    I'm afraid that also use adapters of doesn't help.

    I bought an external card reader. It s a small device and was very cheap and the best is that this external card reader takes in charge most of the maps ;)

  • Card Memory Stick from Sony USB2.0 and Qosmio nine reader

    Hello
    I had a problem with the multicard reader in my Qosmio F10. I have a digital camera of Sony that uses a MemoryStick PRO Duo. The F10 does not have the MemoryStick PRO-Duo without the Sony adapter because the Duo card is smaller than the standard Memory Stick.
    The F10 acknowledges that the Sony Memory Stick has been inserted and a little image of the stick appears as a new drive, everything ok. However when I try to open the drive, the F10 said that the MemoryStick PRO Duo is not formatted and asks me if I want to reformat the drive.
    I am sure that this is not a problem with my Memory Stick Pro-Duo because it is formatted by my camera and contains pictures. I have done the above on my friends Toshiba Satellite and it works fine. I also experiemented with another Memory Stick Pro - Duo and I have the same problem with the F10 once again, there is no problem when I use it in all other devices (other than my F10).
    I'm concerned that there is a problem with my card reader. You have any suggestions on how can I fix?
    Thank you very much. J.

    Hello

    I found this useful document:
    http://support.toshiba-tro.de/KB0/TSB4C00SU0008R01.htm

    Please also consult this forum announcement:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8511&MessageID=29961#29961

    Good bye

  • SLATE 21 MEMORY STICK

    Hi, I have a slate 21 my problem is that when I plug in my memory stick I can see it in the file manager, but not the content. All the files on the memory stick are in Hp media player and the books I have on there under the picture so that I can't read.

    The other problem is that when I try to copy something on the memory stick Manager of files stops and shows me unfortunately, file manager HP has ceased. Can you please tell me how to fix it.

    (Sorry if I misspelled. I am from Romania)

    We do not support the rooting in any form.

    Our system does not prohibit this. As mentioned earlier, the operating system Android 4.4 KitKat won't allow any application, including the operating system itself, to move or manipulate files that are not in the same location as the application itself.

    I.S. = internal storage

    External storage = E.S.

    Application = AppA

    Request B = AppB

    If AppA is on I.S., he should be able to read and use files on I.S. or E.S., but cannot move, delete or create files on E.S.

    If expediency is on E.S., it should be able to read and use files on I.S. or E.S., but cannot move, delete or create files on I.S.

  • HP 110-210: 'I put a memory stick (110-210 HP desktop computer) and nothing comes up.

    "I put a memory stick and nothing comes up.  I don't know how to locate photos that I downloaded on the stick. »

    The query formerly box appearing high on the right is no longer appears. . (since my warranty has expired).    It's a constant problem since the PC was purchased (case #[Personal information deleted], case #[personal information deleted]) as well as other problems IE: bad NIC etc.  This old rather infirm Senior took the PC110 - 210 already replaced once.  I kept the 2nd PC despite the problems.   Everything just too old for at the back of the store.  Thanks for any help.

    Sorry, as I asked earlier, what program you used originally?

    Other than that, I recommend from this day forward, you manually open the memory stick (as I first loaded) and copy and paste the images on drag to a folder on your hard drive. Then again that upward on another drive or in a cloud like Microsoft OneDrive service, etc.

    Don't be fooled by letting them on the memory stick.

    Good luck.

  • Satellite L755-144 - USB memory stick problem

    I have a L755-144 Satellite with Windows 7 Home Premium.
    I tried two USB keys with this computer. It works fine, the other has the following problem:

    When plugged in the first time, a driver loaded for her and then he saw in devices and printers, but not in the computer. It is not possible to browse the files in devices and printers for this stick and it does not activate the remove material option safely; the files that are on it can not be seen.

    I installed the latest driver USB from Toshiba, but that made no difference. Should I give up and use a different memory stick, or is there something else I could do to make this one work?

    > I tried two memory sticks USB with this computer. It works fine, the other has the following problem

    I think that there is a compatibility problem between the USB and the USB key because the other key USB worked fine so I put t think that it s USB port or driver issue.

  • Satellite A300-20n - memory stick pro duo question

    Help people!

    When I put the memory stick sony pro duo in 5 in 1 reader and try to upload photos, I get the message:
    The disk in drive F is not formatted. Want to format it now? Yes / No...

    Nothing happens if I press Yes or no... any body has any experience?

    Thanx

    Hello

    As far as I know the card reader supports Memory Stick Pro, but it does not support the MS Pro Duo cards.

    Please see the user manual.
    You will find an info what cards are supported.

    You can use the maps:
    SD, SDHC, MS, MS Pro, MMC and xD

Maybe you are looking for

  • I do not understand iCloud photo library...

    IM probably having a time above, but I am having trouble with the use of the library. I found that the way it worked you take a bunch of photos on your iPhone and then download the ones you want to keep the photo library to icloud. Everyone has signe

  • HP Split X 2: BIOS password reset

    When we went to close our split HP x 2 it saysUpdate and stop or update and restart. He did theupdated, and then click stop. When we went backon the blue screen asking Administrationpassword or power on password. We used the one wethought was suppose

  • Satellite Pro P100-327: Power Saver utility

    I have a Toshiba Tecra S1 and Toshiba Satellite M40X and two of them had a utility called 'Save energy' that I found very useful. Windows has its own power plant, but it cannot control things like the brightness of the screen and separates not plugge

  • M127FW MFP: Laser Jet MFP M127FW Pro stuck displaying "printing Page Fax: 2.

  • How to create a header in csv file

    I m still beginner in Labview, I'm just learning it this week... I want to do a data conversion for temperature probe... I m having trouble creating a header in the csv file, can anyone help me? I am also attaching my csv file, what I wanted to do li