Motitor non generic PnP

Similar Questions

• Non - generic pnp on the 2nd monitor and no sound

  Original title: generic Non - pnp on the 2nd monitor

  • 2 monitors... Left (23 1/2 ")... Law (21 1/2 ")
  • ........................................ DYNEX... AOC ENVISION series
  • The two usually run on 1920 x 1080
  • With the help of the ATI Radeon HD 5700 series
  • Both using VGA adapters convert
  1. Turn it on one day and the resolution is all screwed up after using an Xbox on the AOC (AV HDMI cords don't transfer sound for me)<---- might="">
  2. Cannot repair resolution of VGA resolution (?) (1600 x 900, 1440 x 900...) due to the generic Non-Plug-and-Play monitor.
  3. System Restore - nothing
  4. Drivers switch autour using AVG and other versions of Radeon. -fucking nothing but resolution
  5. Re-plug-nothing
  6. Defragmentation (desperate after 4 hours) - nothing
  7. Restart for the 100th time
  8. The computer stops at 'Starting Windows' screen and stops at halfway through safe mode.
  9. F8 F8 F8 F8 F8
  10. 'Repair your computer' - nothing
  11. Connect to the computer through Tablet and update all the drivers - back to step 2 of this ti time sometimes shows generic Non - pnp monitor and sometimes peripheral display watch on: laptop display even if my 2nd monitor displays and able to react to what I put on it.

  Monitor AOC is shifted from 3/4 "(black margin on the bottom) and an uncertain amount to the left (no right margin)."

  trying to be as helpful as possible, I have a lot of work to do and CS work is almost impossible for me without 2 monitors to work please help, thank you.
  UPDATE! : I had no sound.

  Mike,

  Disable the LogMeIn driver from Device Manager and check. There are a few reported issues where LogMeIn driver has disabled the aero thus also changed the screen resolution feature.

  -Click Start, and then press on and enter type Device Manager.
  -Double click on graphics cards to expand the video drivers.
  -Right-click on the LogMeIn mirror driver and then click on disable.
  -Restart the computer and see if that helps.

  You can try to uninstall the video drivers and then install the driver from the AMD website as given in my first answer.
  Note: it is there no trouble uninstalling the video driver. When the video driver is uninstalled, Windows starts with minimum VGA drivers. The resolution of the screen (icons on the screen) may look bigger, but after installing the latest video drivers, the screen resolution will be back to normal.

  Please try the following steps and answer results.

• Non - Generic PNP monitor problems

  So a few months ago, I had a problem with my PC where it would do the sounds of disconnection/reconnection as im Plug and unplug a USB... I had no idea what it was and he finally stopped.

  Now, she came back and found out that the cause is what is called my 'generic Non - PNP monitor' I had my window peripheral upward and the noises at the start I looked and saw that coming in and out of connection and other. I only use 1 monitor and run Windows 7 Home Premium.

  I had first turned off this unit and it stopped for a few minutes then it re-enabled itself and started to act up again. Then I uninstalled the driver, but he quickly reinstalled itself... I ended up re - turn off and unplug that I discovered on my screen plugged into my hard drive internal, but also my Radeon. Since I unplugged I have not heard but I want to know if it was the real problem or I'm just have a chance with her?

  Hi Nathan,

  Thanks for the reply.

  It seems that your computer detects that you have another monitor connected. You have a monitor to fix?

  You can set the second monitor in mirror and then disconnect. That could prevent switching monitors.

  Hope this information helps.

• Satellite L650 - generic PnP monitor normal?

  Hi all...

  look at this photo in my computer, is it normal?
  [http://www.m5zn.com/uploads/2010/12/25/photo/1225102212204kcap6f72cqhwo4cr7f.jpg]

  I think its driver problome. Please help me.
  My laptop is satellite L650 psk1je

  Hey,.

  In the photo you posted, I see nothing of what is unusual, that everything is ok, and why the generic PnP monitor is not ok?

  My screen as a Plug & Play monitor and everything is ok with him.
  In addition there is no special driver for monitor.

  Then n t you worry about this, everything is ok.

• Restore settings from the generic pnp monitor on Dell laptop

  While trying to do a second monitor to work with my Dell laptop, I changed somehow the settings on my laptop screen.  Looks like it has changed the appropriate parameters for the additional monitor.

  I can't understand how to restore the original settings for the generic pnp monitor on my laptop. I don't know how to manipulate icons in the window' display settings '.»  When I move the '1' icon, I see just zeroes--not numbers.  At one point, the size of the modified icons - the '1' was smaller and larger '2'. Who is now reversed.

  At this point, I want to just restore the settings of the laptop monitor the way in which they were and start on my original problem (which was Windows Media Player works with the second monitor).

  If you disable the second monitor that the computer should return to the unique display. In the display settings, click on the second monitor if boxes before "this is my main monitor" and "Extend the desktop to this monitor" is checked, click to uncheck the boxes, then click on the apply"" button.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  my original problem (who used to work in Windows Media Player with the second monitor).
  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Solving the multiple monitor problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems

• Windows does not recognize second monitor, lists as generic pnp monitor

  I have a Setup dual monitor. When I bought the monitor in that I plugged it, windows 7 recognized immediately there were no problem driver. After about two weeks all sudden Windows Add as the right brand and model but just as a generic pnp monitor. I rebooted and the problem was solved. Then it started happening more and more and now I have nothing will fix the problem. I installed the drivers for the monitor, ATI drivers reinstalled and nothing else in between I can find. It wouldn't be a problem except that when it it lists as is the generic monitor does not have the correct resolution and I'm stuck with a second monitor that is horrible with a lower resolution. Any help or ideas would be useful.

  Specifications of the computer:

  Windows 7 Ultimate 64 bit

  Motherboard Asus Maximus II

  Intel Core2 Quad Q9550

  4 GB of Ram

  ATI Radeon HD 4870

  First monitor: Acer AL2216W

  Second monitor: Optiquest Q2162wb

  Hi k.Winger,

  What happened when you tried to remove it in Mode safe?

  I suggest to disable your antivirus and security temporarily software and try remove and reinstall driver.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is generic PnP in Device Manager?

  Original title: Identification of the display by the Device Manager in Windows 7

  Hello community,

  I have two Dell 24 "ultrasharp monitors connected to my computer (i.e., Dell Dimension XPS 420) via an Nvidia GeForce GT 620 graphics card. When I check the device to the display manager, it shows the first monitor as a generic "PnP" monitor and the second as a Dell screen. In addition, I chose the second monitor as the main one. Does anyone know why the first monitor is referred to as under the generic name by Device Manager?

  Thank you in advance.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  A generic driver just means that Windows 7 has installed one of its drivers and the component should work fine, but maybe not as many features as the drivers from the manufacturer.

  If you're worried, just go to the support site for the manufacturer of your area and see if there are any drivers you can download and install.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information helps. Please do not hesitate to answer, we would be happy to help.

• generic pnp monitor on computer laptop dv6700

  Hi, maybe a stupid question

  Why does my laptop have a generic pnp monitor listed in the Device Manager?

  I've searched high and low to find the driver for the monitor (not the display adapter) just the monitor that is installed on my laptop. but I'm not able to find one anywhere. Why don't I have a listed specific screen and where can I get a

  I very much appreciate all the answers and help about this

  Here for a good time, not a lot of time

  Yes! HP does not have drivers for notebooks...

  most vista drivers work with win 7 as well...

  but I think that I found a driver for infrared to your laptop even for Vista...

  Try this driver:

  FTP://ftp.HP.com/pub/SoftPaq/sp41501-42000/sp41705.exe

  OR

  FTP://ftp.HP.com/pub/SoftPaq/sp42501-43000/sp42722.exe

  Remove all the drivers installed previously to IR

• Generic PnP Monitor driver problems

  I tried to print from my laptop and it won't let me. I think of network problems. The message indicates that the generic pilot pnp can be altered. I tried to solve this problem by trying to find a download or remove and reinstall. No luck. It is not a huge problem, but I like it to be resolved. There is no free site to scan computer and suggest corrections... I'm not going to pay for it. For any help or suggestion would be greatly appreciated.

  SR

  Your printing problem is most likely a driver.  Re-install the printer driver that you

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• I want to enlarge the screen of my ACER aspireone D255E resolution, I don't date my Graphic Media Accelerator but generic PnP monitor limits it's resolution 1024 x 600... What should I do?

  I've updated my Graphics Media Accelerator (which now is Intel GMA 3150), then I adjusted the upper to 1024 x 600 screen resolution, but the monitor displays only a part of the resolution, what do I do? Help please...

  Hi Dave,.

  The description above, you want to increase the resolution of the screen as it is limited to 1024 x 600.

  I suggest you try the steps from the following link on how to get the best display on your monitor.

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows7/getting-the-best-display-on-your-monitor

  Post us the results once you try the steps above.

• My pc does not recognize that my Sony TV as generic monitor...

  So, I got this desktop of a parent computer and everything worked at the time, his and all. But it was always filled with things I didn't want to uninstall, so I decided to reset it using the Rcovery system tool (via: start > F11 > System Recovery...)

  During the process, a window popped up saying that I have to unplug everything from the pc. The only things connected throughout the entire process werer my mouse wireless, wired keyboard and my Sony Tv.

  I fear that the computer is something to my tv because at the time, the pc WAS read the monitor "Sony TV", as it should have. But now, after the recovery, it will only recognize the TV as

  'Non - generic PnP monitor on Standard VGA graphics card'.

  and now it does not recognize the speakers built into the monitor. I also have new options for resolution that actually match the borders of the screen without killing the quality, but it means nothing to me without the sound. I unplugged the HDMI cable and put it in my xbox 360 and it works again normally, his and everything.

  Please help me, Forums. You're my only hope.

  Hello @Lyko,

  I understand that your computer is showing your Sony TV as a PnP device and there is no sound. I'd be happy to help you, but first of all, I encourage you to publish your product for your computer number. I'm a link a HP Support document below that will show you how to find the number for your product. Because with that I can give you accurate information.

  How can I find my model number or product number?

  In the meantime you can try to use the HP support document: connection to a TV or monitor to your Windows 7 PC using HDMI, which will ensure that you have configured it correctly.

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• New monitor S2031 incompatible with new Pavilion P7 - 1108P?

  I recently bought a Pavilion P7 - 1108P with Windows 7 (64) for use with an HP S2031 LCD monitor 9 for my accountant home based business. The Pavilion has an AMD A4 - 3400 APU with Radeon HD graphics card. There is no VGA port at the back of the computer, only two DVI - D ports. I connected the new monitor to the new computer with the single-link DVI cable supplied with the equipment. My problem is with the display; It is huge and pixelated and won't work with the accounting software I need to use. On the page of screen resolution, the display is listed as 1. Monitor Non - Generic PnP "with no other options available, and the resolution is set to 640 x 480 and disabled with no other option." I tried to install the drivers on the CD supplied with the monitor, but nothing changes. I also downloaded the drivers from the HP website for this monitor for Windows 7, but the computer says that it was not properly installed. After three hours on the phone with HP Tech Support, I was told that the monitor was not compatible with the computer. I did my homework before buying, the specifications of this status monitor is it compatible with Windows 7, which miss me so much? Any help would be greatly appreciated... I left my job full time to start this business there are 4 weeks and I need to get up and running as soon as POSSIBLE!

  Thanks in advance!

  I'd say contacting the line of support by the following thread:

  http://h30434.www3.HP.com/T5/desktop-monitors-and-video/new-HP-Pavilion-PC-can-t-change-monitor-resolution/m-p/1048161#M15274

  -DM (an employee of long date HP)

• Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

  I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

  Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

  Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

• Monitor HP 650 G1 is generic list pnp - I need more resolution of 1366 x 768

  Hi Forum

  I discovered that my HP 650 G1 is exposed generic pnp.

  I need increase this to more than x 1024 768 x.

  This is because some site is displayed correctly if it is less than x 1024

  Help, please.

  Thank you

  Michael

  Hello

  The following PDF shows a few options for the display of the series (page #12):

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04126035.PDF

  Did you BUY the next option? You pay more to get it:

  15.6 "diagonal backlit by LED FHD glare SVA slim (1920 x 1080)

  Kind regards.

• Need advice on the installation of the driver (Generac monitor pnp) officejet 7410

  Hello I have an Officejet 7410 MFP, Win7 Home Premium 32-bit and a 32 bit IE9. I have a third-party driver updater (Driver Boost) I did a scan for new drivers and installed all the drivers except the drivers OJ7400. . These 2 drivers are generic pnp monitor that have a different icon for my HP officejet 7400 series. Boost driver support said I should install all updates. However, I request support here because I am wary of a pilot who is not associated with my officejet 7410 icom. Please provide recommendations related to this issue. Thank you.

  Hello

  You can download the drivers for your printer below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76971-1&cc=us&DLC=en&LC=en&OS=4062&product=391194&sw_lang=

  Proior start the installation, be sure to unplug the USB and restart the PC, and then start the installation. You will be guided to connect the USB cable during the installation process.

  Kind regards

  Shlomi