Mouse behaves badly

Similar Questions

• Microsoft Touch Mouse mouse behaves badly

  When you try to scroll with my touch mouse from Microsoft (not), it closes all open windows and tries to stop Windows 7.  I'm not under any key assignment software (people had suggested AutoHotKey to emulate the Middle-click.

  This does not happen after a restart of Windows 7, but starts to occur randomly after the computer has restarted and Windows worked for awhile.

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

• Mouse behaves badly after the update MS Mouse and keyboard Center

  I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed.  Since this update the scrolling behavior does not work correctly.  In a particular program (a simulation game), scrolling works much too fast.  If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well.  But when I restart the previous settings seem to be lost, so I have to put once again.  I use Win 7-64 bit.  The mouse worked fine before the 2.1.177.0 version.  Any suggestions?  TIA

  PS I vaguely recall a default update but can find no trace of that.  Running MS Mouse and keyboard Center seems normal.  There is no obvious command 'save settings', so I guess it does it automatically.

  Paul

  Hi Paul,.

  Thanks for posting your question on the Forums of community of Microsoft.

  Check out the link and follow the steps in the article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398#appliesTo

  See also:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/is-is/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab05

  Check out the link and check the number of the update has failed.

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  If you are able to get the number of the update failed, try to install the updates manually.
  Reference:
  http://www.Microsoft.com/en-us/download/default.aspx

  Hope this solves the problem.

• Slate 7 HD display behaves badly ONLY when charger plugged!

  Tablet works perfectly, until the charger is plugged.

  Then the drop down menu below, to the top of the screen, will not menu "drop down", some keys to produce a "double blow" and in general, the screen behaves badly and is totally unusable!

  I tried another charger with the same result!  I even tried a ring of ferrite clip - it, still no good.

  Anyone got any ideas?

  Best regards

  Mike

  I think it's pretty clear that you need some kind of equipment repair. Support is the avenue, you will need to continue now.

  In North America, dial 800-474-6836 outside North America find your number here The Support of HP support

• Hello. I have the DVD of Lightroom 5.7.1 version. He just started is behaving badly and I've deleted and reinstalled the product. When I'm in the 'development' module, I get random stains of color in my images. This only happens in the develop module and

  Hello. I have the DVD of Lightroom 5.7.1 version. He just started is behaving badly and I've deleted and reinstalled the product. When I'm in the 'development' module, I get random stains of color in my images. This only occurs in the develop module and no where else. It also does not reach any other software or area on my pc. I also changed the cable and the same triesd another monitor. Anyone have any ideas? Thank you.

  Are patches of red and blue color?

  If so, you probably have warnings of cutting of light/shadow enabled. Press J to hide them.

  You can also activate their power by clicking on the arrows up left and right of the histogram.

  Salient facts cut medium red, medium blue clipped shadows.

• The wireless mouse pointer behaves badly in desktop Acer

  Have an acer desktop, internet explore xp, probably need update of Windows 8

  Original title: have a counter top and just brought a mouse and a wireless keyboard, arrow appear everywhere and have to wait for it to settle down before continuing where I want to go, please advice thanks

  Hi Sabnazzy,

  Welcome to the community of Microsoft and thanks for posting the question. According to your description, wireless mouse does not work properly. I've surely you will help find a solution on the issue.

  1. What is the model number for Acer desktop computer?

  2. What is the brand and model of the keyboard and wireless mouse?

  3. not this problem occurs when you run a specific program or out of order?

  Method 1: Try to insert another port of the mouse and check.

  Try to connect the receiver to a different port. Then check the behavior of the device. By trying the receiver on a different port, you can eliminate all the problems affecting the port itself.

  Method 2:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Step 1: Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, and then run.

  b. type msconfigand click OK. The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal startup - load all services and device drivers and then click on OK.

  d. When you are prompted, click restart to restart the computer.

  If you need assistance in upgrading Windows 8, I suggest you to return the items. You can check hardware compatibility by using the upgrade wizard tool.

  Upgrade to Windows 8
  http://Windows.Microsoft.com/en-in/Windows-8/upgrade-to-Windows-8

  Great upgrade, great offers

  http://Windows.Microsoft.com/en-us/Windows/buy

  Hope this information helps. Please reply back with the State so that we can help you.

• When I click once, my mouse behaves as if I clicked twice

  Original title: mouse issues

  I started having a strange problem. I use a simple click on my mouse and in recent weeks, often when I click once, it behaves as if I clicked twice. Delete two emails instead of one or opening an email when I really only clicked in once to display in a pain of reading.

  I changed the mouse because I assumed that maybe it's the problem, but that is not fixed. I looked at the settings of the mouse and there is nothing that seems to affect it. I'm a little puzzled. I don't know if I is hardware or software. any ideas?

  Hello

  1. how the mouse is connected to the computer (USB or PS2)?

  2. is the program specific question?

  3. What is the make and model of computer?

  4. If you bought the external mouse, what is the brand and model of the mouse?

  If you use Microsoft mouse go through this link and check with the question.

  http://support.Microsoft.com/kb/266738

  If you do not use the Microsoft mouse, follow these steps and update us with the results.

  Step 1: Start the computer in safe mode and check the functionality of a mouse.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the computer works fine in safe mode, perform the clean boot.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  I hope this helps!

   

• How to make my mouse behave

  Is it possible to desensitize this undisciplined mouse? Put a Governor on it? The SHIFT key in the LOW speed?

  Will go back in my inbox at Mac tools and (hopefully) get one of the old mouse to use instead of this rat mini bouncing things around the screen that makes me sick at heart. Come on Apple too in this neuromuscular rodent for us with some difficulties. My fingers/hands tremble sometimes uncontrollable and things fly around on the screen. Go to the point on something and I'm "Chase" it as moves slightly off screen. I can grasp like a gorilla, but the keyboard and mouse are not strings, wheel or pick and shovel (no problem!). Tired of this mischievous mouse. The trackpad yuck!  Please try your hand think he's on the keyboard of a piano! No sympathy needed here. Always walk on the green side of the grass to 71 and love every day!

  Have you tried the speed of tracking for your mouse in system preferences?

  Go to the Apple Menu > System Preferences > mouse and move the slider to speed track toward slow and see if that helps.

  

• Scroll and zoom behaves badly

  Just last week my laptop started acting weird.  When I scroll down with my mouse, there's not down, just scrolls save.  On the drop-down menus that I must use my arrows, the menu will not open.  On games when I Zoom out, he zoomed back right, will not stay outside.  When I try to move the volume rocker continues to go up.  When I try to adjust the color, tint etc on the photos the slide bar keeps sliding back by itself. I use a logitech wireless mouse.  The same one I used for a year without problem.  Help?

  Hello

  Have you tried another mouse on this system and that mouse on another system?

  =====================================================

  If this is not the perhaps of mice a system restore to before it started can help.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  =====================================================

  If the above didn't help:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Refresh the driver stack:

  Control Panel mouse configuration and devices - right click on the mouse - pointing UNINSTALL - REBOOT

  If mouse drivers 3rd party update or reinstall.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The mouse behaves strangely when RDPing in Terminal Server

  Hi all

  I have a few users with Mouse emits when they in their Server RDP terminal server. Some mouse clicks are part not at all and some simple clicks are part such as double-click, and some are normal. Double-tap speed is set at a rate that would not cause this. "Click items as follows" is defined as double click. Anyone have any ideas as to what it could be?

  Hello

  For assistance on this issue, you can ask your question in the below link:

  (Services Terminal Server) remote desktop services

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• Application behaving badly

  Dev 11.1.2.1
  
  I see some bad behavior in my application. I hope that someone will recognize the symptoms and to share the solution.
  
  The application contains a menu top of page. Menu selections run workflows. Workflows allow the user to create, modify or view records in the database. We use an Oracle database.
  
  Generally, the application works very well. Here and there some parts stop working properly. For example, I have a .jsf with a selectOneChoice to select an employee. I have a table that shows the hours of the employee for the week. The soc has a value change listener that runs the ViewObject that gave are shown in the table. The soc is autoSubmit. Partial table triggers include the GS.
  
  Again, in general, this works very well. But sometimes, the page display and selection of a new employee in the soc has no effect on the table. The value change listener does not work or the table does not update or something. The "Done" button on the .jsf works. Click to return to the menu and then go back into the .jsf. Sometimes who's going to make it work properly again, sometimes it will not. If not, then I need to close the session and then again to make it work again.
  
  The app is developed on a Windows 7 PC. It is deployed on a Sun Server. I see this problem when you run the application on the Sun Server, rather than in my stand-alone WLS. The behavior is difficult to reproduce on demand. Generally there is only one user that is running the application; execution of the test plan.
  
  There are other strange behaviors, but it is a good example.
  
  No one knows what may cause this?
  
  Thank you, Steve

  Steven,

  The recommendation to disable the grouping of applications module is simply a troubleshooting technique to help you determine what is the problem, not a solution to the problem. If the problem is related to the cycle activation/passivation, turning off AM pooling will make the problem appear each time instead of intermittent. Therefore, if you disable AM pooling (for testing) and to find the 'sometimes' problem became a problem 'always', while you have identified the scope where the problem is and can then begin to dig more deeply to find the real solution.

  John

• Flash object behaves badly in Firefox

  Firefox launches the flash out of its container file?  The page behaves correctly in IE8 (32-bit).  I posted in the forums of DW who suggested it was a matter of flash and not DW.

  http://www.uscrates.com/examples/antiques/antiques.html

  Thanks in advance.

  The best way to test and possibly solve the problem, is either find the external css doc that references "#mainContent" id and set the properties of "high" and "left" (if they exist otherwise add them) XY px absolute or relative locations. "

  You can also use a style inline on the doc html itself in thecss styles internal to substitute the external doc, just add something like this to your html doc.

  #mainContent {}

  position: absolute;

  top: 100px;

  left: 200px;

  {

• Desktop icons behaves badly

  I was wondering if someone could help.

  I'm 1 of those people who likes elements of the Office organized in a certain way.

  For some reason any, since I upgraded to El Capitan (maybe same Yosemite), whenever I restart my MBPro, everything in the re - arrange themselves alphabetically on the left side of the desktop.

  

  

  I've read some people mention one. DSStore reset. The only problem is that it does not help.

  I don't know what I can do.

  If anyone can help, that would be really appreciated >

  Click on the desktop, and then press command + J to open the display window.

  

  Under her sort by: you can select what option arrangement you prefer menu drop-down. You can also adjust the size of text, icons and spacing of the grid size.

• TB newly installed on 8.1 Windows 64-bit computer behaves badly

  Download is usually fast, but stops at unpredictabily. But even worse, if I try to delete or open mail, TBird usually freezes and says that it is "not responding". I tried to uninstall and reinstall twice, and what happens is always what I had already installed, even though I deleted everything associated with him, as well as uninstall. Any ideas what can happen and how can I solve this problem?
  Thank you
  [email protected]

  What is your 'excellent program antivirus/anti-malware?

• LTE: Smart Lock began to behave badly

  5.1 running XT1527

  "I'm Smart Lock with"Trusted sites"and the" body "detection enabled.

  He had worked fairly reliable until recent days when sometimesbordering on often, rather than to present the unlock code from the display (time and the padlock icon), the screen remains blank when I either pick up the phone out of my office, or come out of my pocket.

  To wake the phone in these cases, I press the power button that gives me a slightly different screen, time of day, date, next alarm time awake, Mid-Center of the screen, combined icons, lock and camera at the bottom of the screen. Sliding upward on this display unlocks the phone.

  This does happen from time to time, and I did not understand a particular set of circumstances that may be related. I have not changed the settings of smart lock since I initially set them up. There has been several app updates in the last week or two.

  The phone still works, and I know how to open upwards, so it is not critical. Just strange.

  Oh, never mind. What was the problem, it seems to have disappeared.

  It seems that most of the problems I encountered with this phone seems to disappear by themselves after a few days. It is perhaps the side effects of many updates app coming down all day, the temperature and humidity or moisture from my fingers.

  So far, long service life only problems I have are with the app of my car and with the function of Group 12.

  In the future, I'll wait for a problem to persist for at least a week before saying anything.