Mouse cursor freezes

Similar Questions

• My mouse cursor freezes and I have to reboot for it to release

  original title: frozen

  My mouse cursor freezes and I have to restart for his release, when I click to go back a page or click on the x to close the page, it won't work, I have to keep clicking on it and then finally it will go ahead and work, it also as the page is too frozen.  Also when I type, the letters don't just type, they released the letters wrong or when I type, the letters will go out to a lot of the same quick true letter and I try to go back to clear them and sometimes it stops to type the letters when I'm a backspace to erase the letters, it's strange.

  Hello

  Make sure that all of the mouse and/or the keyboard drivers are up to date, if no 3rd party driver is used.

  --------------------

  Use the startup clean and other methods to try to determine the cause and correct the problem.

  --------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• On-screen text is faded-unintelligible, audio playback is corrupt and the mouse cursor freezes erratically?

  Hello

  Suspecting a severe virus attack, I reinstalled my O.S. Win7x32.  I see now several faults, I.e. the mouse cursor freezes, corrupted - the text to audio playback screen is faded and illegible in places?

  Any help would be greatly appreciated.

  Thank you in advance,

  John B.

  Sorry, but, all that said... FAILURE OF THE MOTHERBOARD!

• Qosmio G20 - the mouse cursor freezes

  Play command and conquer tiberium wars a coupke of minutes in the game, the mouse cursor will feeze not allowing me to select units, etc.. I have to use Ctrl, alt, del to exit the game. This does not in all the other games that I used on the laptop. Is there something I can do?

  Details of my laptop are: the present report time: 24/03/2008, 09:49:38
  Machine name: YOUR-3CB2BF2DC5
  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227 - 2254)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Qosmio G20
  BIOS: v1.30
  : Processor Intel (r) Pentium (r) M 2.26 GHz
  Memory: 1024 MB RAM
  Page file: 508 MB used, 1952 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.2180 32 bit Unicode

  Hello

  If I understand your game freeze but who knows why this happen. As you can see it happen with this game only.
  Have you tried to delete this game and make new facility?

• MS Wireless mouse cursor freeze in XP

  I was getting a random freeze cursor 2 or 3 times a week for a month and a reboot might solve the problem. Yesterday, cursor freeze happened and a restart had no effect. I changed the battery, no change. I replaced the mouse and receiver with one another; no change. I rebooted in Safe Mode; no change. In safe mode, I activated Avast and have a full scan; completely clean except that he told me that he could not access some files. (???) I am not able to select Start scan from Avast because I can't select it due to a frozen mouse. I also checked settings hardware for USB mouse and made sure it was allowed. ; no change.

  I didn't notice if there is a particular application that caused 10-12 freezes last month; I don't think that's the problem. And last week I perform a full scan and a week before a boot scan. the two returned without problems. I am running in XP Pro SP3 on a desktop processor Intel Dual who otherwise worked perfectly for months.

  From the other thread:

  '

  Thread title: move a frozen mouse cursor to select files, buttons, etc...

  Wireless link: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/moving-a-frozen-mouse-cursor-to-select-files/8faf1246-daec-4fb8-9731-723b99c1c51d

  Content of thread:

  My XP SP3 system does not meet a PS2 Mouse or either of two wireless USB mice. I can get to the window of the hardware system, but I need to be able to move the mouse around the screen, so I choose option or file boxes to remove mouse drivers and re - install.  I watched keyboard command lists and none seem to say how to move the cursor by a few (or a few hundred) pixels; only "end of a line, etc...  Is there some these combo keys that allow moving the slider of distances involved to # essential features or the period of ownership of the keys?

  Hello

  Yes, I already had all these checks and found no problem.

  I just installed a PS2 Mouse and now my cursor MOVES!  But I decided to do a rootkit virus scan before anything else (AVAST).  It may take a few hours to complete then I won't be able to do any further testing until tonight...

• The mouse cursor freezes, Silverlight Plugin, Windows 7 Pro 64 bit.

  When activated, the plugin Silverlight 4 freezes my cursor of the mouse on the web pages with Silverlight. Disabling Silverlight plugin restores the function of the mouse cursor, but disables display Silverlight content. Occurs with the latest versions of Firefox and IE. The PS2 and USB Wacom input Tablet mouse freeze. Keyboard PS2 remains active, except the "Mouse keys" used in the cursor. Must press 'Back' key to get the silverlight content web page up the function of mouse cursor. Update drivers Wacom and drivers MS Intellimouse Optical. Uninstalled and reinstalled the Silverlight 4. Problem remains.

  Platform: MS Win 7 Pro 64-bit. All updates current. Material: Card mother Asus P6T, Core i7 930 CPU, 10 GB of RAM. Security through Zonealarm Extreme Security Suite with active Forcefield. No problem on my PC with Win XP Pro 32-bit.

  I can't determine if it's a bug with Silverlight/Win 7 64 bit or a problem with my computer/hardware. I don't have problems with my mouse cursor otherwise. The research of this question gave no solution. Suggestions to solve this problem would be appreciated.

  Hi DelgadoFlash,

  1. did you of recent changes on the computer?

  2. the problem persists both 32 and 64 bit browser explore?

  This can happen if you haveWacom Graphire Tablet input connected to the computer.

  You must disable Tablet PC Input Service in the Service Manager and check if the problem persists.

  (a) click Start menu and type services.msc in the search box and press enter

  (b) later in the list of services, locate Tablet PC input service.

  (c) make a right click on it and click Properties, set the Startup Type to disabled and press the Stop button.

  (d) close the services window

  After disabling the service above you won't be able to use the device.

  As a work plug the appliance only when you need to use.

  Rename an executable file calledWISPTIS.exe in the C:\Windows\syswow64 directory to something likeWISPTIS_old.exe.

  WoW64 is synonymous with "Windows on Windows 64-bit", and it contains all the files of 32-bitbinary required for compatibility.

  If the above step works, then you will need to contact Wacom to check if they have released an update on this issue.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Flex 3 - my mouse cursor keeps freezing!

  I recently bought a Lenovo Flex 3 Lap Top with Windows 10 operating system, and it has been giving me a lot of problems when playing music on itunes. When I opened my itunes and play music my mouse cursor freezes every two seconds. IM become frustrated and think of returning the laptop because I can't fiind a solution can anyone help please? Thank you.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  In response to customer relationships of performance of mouse lagging on Flex 3 14, Flex 3 15 and Yoga 500 laptops running Windows 10, Lenovo released an update the Audio driver, version 6.0.1.7624.

  The updated Audio driver can be downloaded here: http://support.lenovo.com/us/en/downloads/DS104700

  Thank you

• do not move the mouse cursor

  Hi all. today I did something really stupid. I was in a chatroom without supervision earlier and another person and I'm in it and I could tell definently I makes him angry. I left the chat room and 15 minutes later im on another site and the cursor of the mouse is suddenly freezes and does not scroll on the page. everything else seems to work very well. so I restarted the computer, the mouse works when the windows password page appears, so I type the password and then loading this page and the home page comes (one with all programs, etc.) and appears as soon as that is when the mouse cursor freezes and not scroll or move. everything else continues to load and seems to work very well. If I restart the computer and put it in safe mode and the mouse works moves very well and everything. Anyway, the bottom line is I think the other person sent me a virus or something that is used to pass my cursor in normal mode. What should I do? also, I can't get the sound to work on my computer in safe mode. says low right volume icon ' audio service does not "and I want it running in safe mode, until I can get this cursor problem is resolved. any help is greatly appreciated and please explain in terms laymans, because I don't know anything about computers. Thank you very much for your time and have a great day.

  Hi crazyforfrance,
   
  As the mouse works properly in safe mode I suggest you try troubleshooting this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
   
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:
   
  Clean clean boot.
   
  a. Click Start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  b. on the general tab, click Selective startup.
  c. under Selective startup, click to clear the load startup items.
  d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  e. click OK.
  f. When you are prompted, click on restart.
  g. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.
  
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  Note: In safe mode you may not be able to hear the sound because the sound drivers and other drivers may not load and only essential drivers can handle, which are very important to run an operating system. and it's a way of diagonistic.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• The mouse cursor slows and freezes

  Original title: cursor freezing

  My cursor continues to slow, gets slow-and then freezes, if this problem a support or can I fix it I?

  Hello

  1. What is the version of your Windows operating system?

  2. What is the brand and model of the mouse?

  3. did you last changes before the show?

  4 when was the last time it was working fine?

  Please click on the links to solve the problem.

  Method 1:

  Step 1:

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You need perform a clean boot to prevent possible ask contradictory to interfere with the installation of the updates.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below

  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

  Method 2:

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 3: Scan your computer by using the Microsoft Safety Scanner by clicking Download now:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Windows 7 screen freezes, freezes mouse cursor and keyboard freezes.

  Hi all

  About a month ago my internet kept cutting at about 02:00 in the afternoon - even if my BThub said it was a signal - and my internet access would not return until 05:00 sharp later that day here. This went on for about two weeks, it doesn't happen too much now, however, recently, something happens...

  I have a desktop HP Pavilion s5000 and all day - every day - not only freezes my screen, if I'm online or simply type in a Word doc, but my mouse cursor and keyboard freeze too, all at once. It's as if all of the computer crashes, and the only way I can "unfreeze" it is cutting off the entire batch to the switch. In this case nothing three times a day to ten times a day. Can someone tell me what could be the problem and how I can try to solve it? I did a system restore, to restore the PC to a date earlier, I did this about five times now, but the problem persists.

  Many thanks in advance,

  Danni.

  Hello Danni,

  Thank you for reaching out to us to the Microsoft Community Forum.

  When your computer hangs or freezes, it is disruptive and can slow you down. There are a few reasons your computer might hang, freeze, or crash. Try the following common methods provided for in article below as a first step to solve the problem.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also as you use HP computer, you can try the troubleshooting provided in the link below steps and check if that helps resolve the issue.

  Computer hangs or freezes (Windows 7)

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Important:

  In case you follow ' step 7 "in the above link from HP that speaks to recover the computer to factory settings then you will need to contact HP support and we also recommend that you back up all important data to an external drive before recovery of the computer to the factory settings.

  Hope that the information provided will help you. Do we know the State of the question, so that we can help you further.

• Cursor freeze (R7 Aspire 571 G)

  Hi guys! Ineed your help!
  Lately, my mouse (cursor) started to freeze. It looks like all the second cursor freeze for a bit, and it will once again every 1-2 seconds. First I thought that he just a battery of my mouse is released, but when I plug in a different mouse - the problem persists. Then I tried button touchpad - same question.
  I have a 10 Windows and installed all of the upgrades. 35% of RAM CPU HDD works around 8%, 0%. All programs are turned off.
  Here is the link for the video, how it looks like (in the video, I was constantly moving the mouse without stopping). Sorry for the quality: https://youtu.be/ClCjBTTwpS4

  Guys, I solved this problem by reinstalling the realtek drivers. These gels happens because of FMAPP.exe (in the Task Manager) If you stop it manually - freezes disappear. But it is useful until you restart your computer.
  I deleted the realtek drivers and reinstall the old version through "Acer Recovery Management" (c:/Ptogram/Acer files). And now the freezes disappear.

• my cursor freezes.

  MY WINDOWS XP IS GRATEFUL TO THE MOUSE, BUT WHEN I MOVED THE MOUSE CURSOR ON THE SCREEN DOES NOT MOVE. HOW CAN I FIX THIS PROBLEM?

  Hello

  1. what changes have been made to your computer, after which the issue started?
  2 have you installed a new mouse?
  3 - is the cursor freeze on a particular application?
  4. If so, what is the name of the application?

  Test the issue in a clean boot State.

  Note: The steps in the article to restart your computer as usual.

• Arrow cursor freezes on the desktop to start OK in safe mode

  Compaq Presario laptop.  Windows Vista SP 1. Touchpad

  My wife's cell phone goes through a normal startup and about 5-10 seconds after the desktop appears, the arrow cursor freezes in its previous location.  It will not move.  It apppears that touch screen turns off.  To turn off the computer, I pressed the power button.

  When I start in safe mode the touchpad works very well.

  I reinstalled the driver touch screen safe mode ATP.  No joy.

  This has happened in the last two days.  After it happened, I did a full scan with a Norton freshly updated in safe mode.  Only a minor tracking cookie has been found and fixed.  The problem has not disappeared.

  Do I have to restore full or is it just a simple fix?

  Hello

  Two methods:

  1 try a restore of the system back to before that happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  -----------------------------------------------------

  2A. What antivirus/antispyware/security products do you have on the machine? Be one on which you ALREADY had
  This machine, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  -----

  2 B follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  2 C. After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  2. D Vista and Windows 7 updated drivers love then here's how update the most important.

  It's my generic how updates of appropriate driver: (include reinstalling the drivers for the touchpad).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• The mouse cursor flashes busy

  Hello world

  I've just updated to the latest version of windows 10 and now, every time I enter Acrobat my mouse cursor flashes busy. The Manager of tasks shows 2 different process called Adobe RdrCEF (32 bit), a work constantly and others appearing and disappearing very quickly. If I'm quick enough to close it the problem stops, but it doesn't seem like a convenient way to solve the problem...
  Any ideas what I could do?

  Thank you.

  Hi leo69,

  Please try to uninstall and reinstall the application.

  Download Adobe Reader and Acrobat cleaning - Adobe Labs tool cleaning tool allows to remove Acrobat, then restart your system.

  Then try to reinstall the application here: Adobe - Adobe Acrobat Reader DC Distribution

  See also this KB doc: Troubleshooting of errors, freezes | Adobe Reader | Windows

  Let us know if problem still persists.

  Kind regards

  Meenakshi

• Turn the mouse cursor

  This only happens when I visit Facebook, but the mouse cursor turns and will not stop. Firefox will never block or unresponsive, but it behaves as if there is always from my PC 'think '. Any ideas on how to stop my cursor to turn constantly?