Mouse Touchpad not scrolling

I have a HP Envy spectrum 13t: 2000 updated the week last to Windows 8 (64-bit).

I reinstalled the driver of Synpatics several times (finally understood how to stop the automatic updates of windows), but I can still use the scrolling feature on the right side of my touchpad.   When I go into settings it shows that it is ticked, but it does not work. Any suggestions?

Also, I did something with the touchpad where my screen changes in full screen, but I don't know what I'm doing.   Any suggestions?

Download and install the latest Intel chipset driver of here.

Reset.

Uninstall the current driver for the Synaptics ClickPad and restart.

Download and install the latest deiver here.

Check the results.

Tags: Notebooks

Similar Questions

  • my built-in touchpad mouse will not scroll down

    original title: mouse Touchpad

    I was searching in the control panel and uninstall some programs from Microsoft (like a total fool!) and now my built-in touchpad mouse will not scroll down.  I have to use the arrows on the far right of the screen to scroll up and down.  Integrated on my lap top touchpad scroll upwards and down.   Any suggestions?  ASAP please!

    If you have a Dell, I can show you step by step. Options in Dell are not the same as the other makes it necessary.

    In general...
    Right-click on an open office space > Personalize > mouse pointers (Yes! of the mouse pointers) > from here, you will have to consider for theParameters of the Touchpad > if found, click it. Then, search equivalent of 'change settings button scroll '. If found, click it. Then, see if the "Activate " box is DISABLED. If so, check it out > OK

    See screenshot...

    t-4-2

  • Touchpad and mouse does not scroll on AOL or Fox News site

    Original title: mouse and keyboard does not not on the first page of web sites.

    \When opening site Internet AOL or Fox News, my touchpad and mouse does not scroll.  In addition, the normal ads that appear on AOL and the Fox new sites do not appear.  Touchpad and mouse work fine on the facebook page.  I can't click and close AOL and Fox News.  I run a system check total notron and restore systems affecting a couple of days, when everything worked well.  Any ideas to solve the problem?

    Hello

    1. what web browser do you use?

    2. What is the brand and model of the computer?

    3. What is the brand and model of the mouse?

    4. you receive an error message?

    5. have you made changes on the computer before this problem?

    Step 1:

    If you use Internet Explorer, you can view the following link.

    Why a few blank pages or incorrectly displayed in Internet Explorer?

    http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer

    Step 2:

    You can see the following link.

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=tab04

    Please provide us with more information to help you further.

  • computer laptop 15-r028TX: laptop mouse pad not scroll

    Hi I use a hp 15 notebook pc r028tx...

    my touch pad is not scroll and even show no matter which setting to change...

    It's also not showing one of its features shown here before like, if you drag the left edge, you can switch between the windows...

    I would be grateful for your solution

    HI @vivek_kallakuri ,

    Thank you for your request, I will do my best to help!

    I understand that your TouchPad is more you to scroll with it.  Here is a link for the use and troubleshooting of the TouchPad and ClickPad (Windows 8) that will guide you through a step to try.

    Have you tried Automated fault (Windows 8) research?

    Did you run the HP Support Assistantsince that happened?

    If it was a recent change you might consider doing a restore to where he worked.

    Using Microsoft System Restore (Windows 8)

    You can also try a Refresh Your PC to solve problems (Windows 8). This will reinstall the OS and should not affect your personal files.  I recommend doing a backup first just in case.

    You can consider contacting HP support for assistance that they can connect remotely to your system to help solve the problems.

    Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

    World wide phone holder

    The last thing I can suggest would be to do a cover of the plant. Performing a recovery of HP (Windows 8) system

    You will notice there is an option to make a backup during this process, if you don't have one I suggest you do one now.

    Restore files that have been supported to the top using HP Recovery Manager (Windows 8)

    Good luck!

  • Need help mouse Touchpad not working not properly (HP Pavilion g6-2005ax)

    Problem: Mouse Touchpad doesn't work does not correctly (HP Pavilion g6-2005ax)

    Product name: HP Pavilion g6-2005ax Notebook PC (Windows 7 home basic 64-bit)
    Software: Synaptics Touchpad on PS/2 Port V7.5

    1 week back I bought Pavilion g6-2005ax laptop since then my mouse touchpad is not working properly
    Remains of structures between the two using the touchpad, this problem exists until the system needs restart again and again, just for this touchpad problem
    If I really disappointed just for this problem
    so please help me to answer how can I solve this problem.

    Awaiting your quick response

    Thank you

    Hello

    Please find the link given below might help you solve your problem.

    The use and configuration of the touchpad

  • touchpad not scrolling

    Hi I have an acer aspire V3 series laptop PC with windows 7.  log in my touchad stopped working after connecting a usb mouse. Even after the mouse is disconnected and restarted, the problem remains. Other functions of touchpad are very good except the scrolling. Check the properties of the touchpad. everything is fine, the scrolling is enabled. could someone please advice? Thank you.

    Hello

    The drivers for the touchpad can be damaged, which could result in a malfunction.

    I recommend the following methods and check if that helps.

    Method 1: Run the hardware and devices troubleshooter.

    It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    See the article below.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

    If the problem persists, update us the touchpad drivers and check if it helps.

    Method 2: Update drivers for the touchpad in Device Manager.

    (a) press the Windows key + R, type devmgmt.msc.

    (b) to expand mice and other pointing devices.

    (c) click on properties, click the driver tab.

    (d) click the Update Driver button.

    (e) click on the OK button.

    See also section below.

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

    If the problem persists, feel free to post. We're here to help.

  • Touchpad not scrolling after disabling/re-enabling

    I am running Windows 7 on a 64-bit laptop G62. I decided recently to review what programs were running at startup and disabled the Synaptics Pointing Device Driver, not knowing what it was for. After re-start the computer, I noticed that I couldn't scroll using my touchpad more. I have reactivated the Synaptics Pointing Device Driver and restarted my machine, but scrolling does not always work. If I try to open the "mouse" of the Control Panel, it says 'Impossible to connect to the Synaptics Pointing Device Driver'. Continuing, I am told that the Synaptics PS/2 Port TouchPad "device works correctly. However, I can't change the settings to enable vertical scrolling or allow horizontal scrolling. I don't know what the problem is and what I should do to remedy. If anyone has suggestions/solutions, I would be very grateful to hear. Thank you.

    Nevermind, I solved the problem. Search "Synaptics" in my computer. Opens a folder labeled Synaptics. Selected InstNT. Right click; Choose 'run as administrator '. Problem solved.

  • The wheel on my mouse will not scroll from the current software update. It works on all other programs on my PC. Help, please!

    I use Firefox with Windows XP and a Lenovo ThinkPad and Lenovo optical wireless mouse. Some websites do not allow me to scroll or click on the links

    I was in my version of FireFox from current to version 3.6.25 and that fixed it. I never pass!

  • Synaptics touchpad not scrolling

    Hi, I know there are already several post on this forum about similar issues, but after going through most of them, I could not solve my problem.

    I have a HP Pavilion 14-b130sa, running windows 8. Last night I turned off my phone after using it daily for writing an essay, when I turned then the laptop back on about 3 hours later, I could no longer scroll using the touchpad. My phone doesn't let me run or watch pilots synatics 7.5 or all files, as it is said that they can not be found.

    I tried to reinstall the drivers, but this did not seem to have helped. I went through the other suggestions on this support page, but nothing has helped

    I would be really grateful to anyones suggestions, this is a minor feature, but I got very used to and which helps when reading for testing!

    Dear customer,

    Welcome and thanks for posting your question on the Forum of Support HP

    Looks like you are facing difficulties to solve problems with your laptop Touchpad

    We will surely help you with this

    Steps to drain the static charge and load the BIOS default settings to solve the problem

    Step 01. Turn off the laptop

    Step 02. Disconnect the power/AC adapter and also remove the battery too

    Step 03. Press and hold the power button of the laptop for a minute

    Step 04. Now re - insert the battery back in and plug again the power supply/adapter

    Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

    Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

    Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

    Step 08. Now, please wait until the unit load the Windows operating system

    Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

    Please click on this link to find several troubleshooting steps to solve this problem

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • Magic mouse does not scroll up and down in the Pages?

    Hi my Mouse 1 Magic suddenly stopped scrolling up and down in the Pages, BUT: it scrolls by always going up and down in Safari and some other programs I've tried like overview and reminders.

    If you are using El Capitan I believe that there is an update of Pages since last October.   Have you downloaded.

    In my view, the current version number with the El Cap is 5.6.   Failure to have done might be the problem.

  • The mouse will not scroll after the clean boot

    Hello!

    I just had perform a clean boot, because I had problems to connect to the internet, but after that (and re - start Windows normally later) my touchpad doesn't let me scroll upwards or downwards. It's as if this feature has completely disappeared. What can I do about it?

    I use Windows 7 on a Toshiba Satellite C855 - 10 p.

    Thank you!

    You may have inadvertently disabled the software Toshiba Touchpad controller.  You could go back to MSCONFIG to check if it is listed.  Or you may need to download again on the Toshiba site.

    You can also use system restore to restore the registry in how it was previously (in recent days).  Learn how on this in the option #1 here.

  • Keyboard and Mouse/touchpad not working not not @ simultaneously.

    Earlier tonight while playing Guild Wars 2 I move my PC with the num pad and try to use the mouse to get a better view. The mouse works for about 5 - 1.5secs before locking and I have to release the buttons on the keyboard until the mouse is moved again.

    Now before you ask this same problem occurs when in windows.

    Update to the latest drivers.

    Envy of HP DV7 - 7212nr - no hardware changes.

    FIXED BY me with 3 minutes of google.

    http://en.kioskea.NET/forum/affich-217981-cannot-move-mouse-while-typing

  • Problem with Microsoft wireless mobile mouse 4000 scroll will not scroll on any computer?

    My mouse does not scroll vertically, but it scrolls horizontally. I tried different mouse on this computer and they are all scroll very well and I tested this mouse on different computers and it won't yet scroll. I followed through all the utilities provided on this site (checking the HID, reinstalling the software, verification of parasitic programs, etc.) and nothing has worked. Is there something else I'm missing?

    Hi Vjenkins,

    As the mouse does not work on different computers and other mice work on this computer, it seems that there is a problem with the mouse itself.

    Sinceyou have followed the steps mentioned in article to resolve problems with the mouse button or scroll the parameters, I would suggest that you contact Microsoft hardware support for further assistance.

    Hardware support

  • my magic mouse suddenly stopped scrolling in pages

    While editing a long document into pages my magic mouse suddenly stopped scrolling.

    I have looked on various online forums and found no solution.

    I checked my setting and preferences, but found nothing changed.

    It scrolls up and down allows very well on the Internet pages and in number and even get out of my folder in the Finder.

    I tried other folders and documents in Pages and the mouse does not scroll.

    It shows that 35% battery life and I think, if she was too weak, do not work on anything.

    I did something wrong?

    I'm fairly new to Mac and perhaps I accidentally pressed a combination of keys for my editing.

    I hope someone out there can tell me how to solve this problem.

    I had to resort to using the arrows up and down!

    And my mouse scrolls quite happy in this question paper.

    Well, I'll answer myself that I see no way to change the message.

    I checked again on the Internet and came up with a site that said I had to change things for my mouse or trackpad (don't have to make one of these!) accessibility. I wasn't click the scrolling speed and the arrow to 'faster' (he was placed in the middle of the speed bar).

    I then chose one of my documents Pages, and to my amazement, found that I could scroll through once again with the mouse!

    While that's fine I can continue once editing, I would still know WHY it is suddenly stopped and WHY he started working so I changed the speed of scrolling.

    All responses are welcome.

    If I hit a key by chance combination that has stop working in the Pages, then I would like to know so that I don't make this mistake once again if in fact I did a mistake.

  • Pavilion dv7: Hp Pavilion dv7, synaptics pointing device do not scroll after windows 10

    After the upgrade to windows 10 my mouse does not scroll. I've updated the driver, without help. I uninstalled and reinstalled it, no help. I drove back from the driver, any help, I don't reupdated the driver no help, I deleted the system whole synaptics and it not redownloaded from their Web site, no help, updating the driver again, no help. I then went live... help the technician did an update again... without help. I went to the live help again and technician did a cleaning/repair of the system from the command prompt, no help (I then abandoned with live help) and yes the scrolling option is checked in the settings. Please can someone help me.

    abracadbra ive got mine working!  is a long time try this then try to stay with me and forgive me if I get a lil confusing...

    go to your add/remove programs and remove the synaptics program

    you have to restart... it will say: it will not work or possibly used... your fixed points of the mouse and click on

    Once it's done and your back on the desktop click your search in the web area and windows at the bottom left at the beginning

    type restore and click on Recovery Manager

    under I need help immediately, click the driver reinstall (second option down in the first column)

    follow the signs from there

    or sorry for instructions long but you can also use the hp support assistant, click diagnostics and tools, keyboard and mouse from the evil that pulls up which one is troubling you and it gives you a way I tried and did not work so I said no and he gives me the second option which is above... Please let me know if it works for you...

Maybe you are looking for

  • scope of nor-5114 interfaced to 2576 OR multiplexter relay and a signal to test via Coax, noise problems

    Hello We use a system of connected steps and have questions about the best method to interface to our test design. DUT (Test Point [n])---> 6 ft coaxial cable---> 96pin--> NI 2576---> NI 5114 (map interface) connector Note1: the map interface 96pin a

  • How to control the quote on NAS devices by windows server 2008 R2?

    Dear all, I have Windows Server 2008 R2, and I have an important investigation concerning the control of quotes on my NAS device. I have a LaCie 2big Network 2, connected to my network and I copied all my data on it, my shared folder is public, so it

  • "scanner not found".

    I was wondering if anyone has experience with this error message, even if they print on their all-in-one: 'the scanner could not be initialized (Scanner not found).' I could scan until I unpacked & re - configure my Mac to a new apartment - as far as

  • Help, please! black screen with blinking cursor...

    my screen said to check the file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to

  • Icons, images and text have become too narrow on Vista

    Recently, I turned on my computer and found that the icons on my desktop had been rearranged and were smaller than they are usually.  I went to view the settings to try and get everything back to normal size, what I've done.  But now everything on sc