MouseOver move 1 6 buttons on the front for easy Gallery

Similar Questions

• Create a button on the front for the diagram

  Hello

  I am looking to create a button on the front for the diagram.

  Is this possible? If so, how?

  Thank you!

  
  

• Satellite Pro M30: buttons on the front don't do media control

  Buttons on the front does nothing when the machine (satellite Pro M30) is disabled or order the multimedia. Is there something I need to do to configure, or is it a hardware failure?

  Hugo

  Hello
  to perform the General music in "offline" mode, I pushed and hold down the Mode button until the blue LED on the CD symbol lit up on the front.
  After that I inserted a music CD, and portable he played very well in "offline" mode

  But this time I had to study the manual actually.

• How to customize the 3 buttons on the front of the Portege R400?

  I wonder if it is possible to customize the function of the three buttons on the front of my R400?

  For the moment, they seem to do nothing. I would use both of them as PgUp and PgDn display documents in tablet mode.

  Using the program "Toshiba button Support" I am only able to set the knob to "e-mail" under the screen.
  Documentation, forum, knowledge base do not mention anything about the R400 and three buttons. At least not how we define their function.

  Is to customize their possible at all?

  Hello

  What buttons do you mean exactly?

  As far as I know there are 5 different buttons;

  -Switch
  -Cross-functional button
  -ESC/display rotation button
  -Windows Security button
  -Toshiba email button

  The user manual must provide details of the simple buttons.
  But as I m don't me wrong, the configuration button is not editable. It's fix.

  You're right about the utility of Toshiba button support. This utility controls the functionality of the mail button. It is a single button that can be configured and you could assign an application to the it.

  Concerning

• HP Envy 120: Touch screen does not show. Buttons on the front are unresponsive.

  The touch screen does not appear or appears with vertical bands of color. Power switch; WiFi; Open on the front buttons do not work. It will be printed from the computer and printed the test page. After it printed the test page, it stops and will not respond to the buttons on the front, but will always show from the computer. I unplugged and plugged back in after waiting for 30 seconds.

  If it is not under warranty take it. Buy something else.

• How to add a record button on the front panel to save waveform data

  Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

  I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

• A button on the front panel reset

  I use a record button on the front panel, in the mode "change when you press on. I have run the VI, then press the record button. After having intercepted the VI, the button lights. How do the button return automatically to the OFF state during execution of the VI next time?

  Set the property to "False" node, it will reset.

• Is there a way to put a button on the front panel only when clicked gives a pop-up dialog box with more information on it?

  Hello world

  The simulations that I create are very simple themselves but are intended to use in the classroom to help students learn more about the proven theory.  I hope to be able to place a 'help' or 'other info' button on the front panel that rises wants more info on theory, they can click on it and a pop up appears with background information on it.  It should also have a second button to close it and return to the main façade.  Can anyone lead me in the right direction?

  Thank you!

  Use a structure of the event on the main vi when the button is clicked, launches a "help" void / vi. On the inside of the Sub vi (with the set properties to load the front when it is called, of course), use another structure of the event to wait until then click on the button of the Subvi, you can return to the main VI. Do you need assistance on using the structures of the event?

  Charles

• Call a help file (.chm) when press a button on the front

  I can't call a help file (.chm) when press a button on the front. I have only called when press a key then right click the mouse and navigate the selected key for the button.

  Call the help file (.chm) when press a butto wrote:
  I have only called when press a key then right click the mouse and navigate the selected key for the button.

  This part is not so clear for me.

  But you have coded according to the part file .chm calling within the event to change the value of this button?

  If not try this using the Structure of the event & post here.

  If you post your code here, someone can help reg what has gone wrong.

• Scan of the computer does not work in silent mode of the button on the front panel.

  The machine is the Photosmart all-in-1 6280 on a network of small size and using the HP Solution Center. Basically everthing works fine, but when I use the button on the front panel to scan a document, it seems necessary to walk to the computer to answer a question about whether I want to scan another document until I could walk to the printer/scanner and press the button to scan the following document. Surely, there must be a way to do the scan run in quiet mode so that I don't have to keep clicking OK on the computer every time? I have already disabled the overview of digitization and the prompt for advanced options.

  Oops, forget all that; now I found the setting 'interrogate analyses' which stood on another branch of the installation menus. That solved my problem

• How can I move my existing sites to the catalyst for business for subscribers of creative cloud?

  Hello!

  I have three sites that I always welcomed with heart Internet (www.heartinternet.uk). I understand that I can host 5 free sites with catalyst for business with my creative cloud membership. How can I go on this passage?

  Thank you very much

  has answered your thread How can I move my existing sites to the catalyst for business for subscribers of creative cloud?

• How can I move the home button between the front and the address bar?

  Her that I have my firefox put in place over the years is to place the buttons like this:

  [Back] [Front] [Stop/Reload] [Home] [Progress Animation] [Address bar]

  Now in FF29 I'm trying to move the home button between BackForward buttons and the address bar and it won't let me.

  I thought that FF29 was supposed to be the most customizable Firefox yet? * confused *.

  Is there a way to do it, am I missing something? Thank you

  "I thought that FF29 was supposed to be the most customizable Firefox yet?
  
  Who told you that was incorrect, as far as I'm concerned. Firefox is more customizable than the 'competition', but not as much as the previous versions were.

  The home button can be moved, but the back / button drop-down list is set to the address bar - they cannot be separated.

  The combo Stop / Reload button is locked in the address bar.
  
  The 'old' activity indicator has disappeared. Deemed unnecessary with the animation of loading on the left corner of each tab, where the favorite icon once the page is completely loaded.

  https://support.Mozilla.org/en-us/KB/how-to-make-new-Firefox-look-like-old-Firefox

  Many users install the extension Classic theme restaurateur.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/classicthemerestorer/
  But I don't think it will turn out to be along term solution. As users begin to install other extensions, I think they're going to face compatibility issues where the new extension "expects" the user to use what Firefox is come with - not the 'retro' functions

• pause button on the front panel

  Hello.

  I try to run synchronous, continuous analog conversion of 2 cards of PXI-6259, and capture the State of the several digital at the same time.  I managed to get everything is configured and working properly, however I have a problem if the user presses the button "pause" on the front panel.

  From what I can tell, acquisitions of data will continue to run in the background (I'm using a task DAQmx and stop was never called).  For my analog inputs, this is not a problem.  However, the digital inputs always generate a ' 200010 - on-board memory overflow error. Due to the limitations of system and/or the bandwidth of the bus, the driver could not read data the device enough fast to follow the flow of the unit. »

  Is it possible to register for an event of user interface that is generated when the user presses the button "pause", so that I can stop the acquisitoin of data before the error occurs?

  Thanks in advance,

  -Rich

  NormPgh wrote:

  I thought to add my own button "pause" / control, but my users have become accustomed to hitting the pause on the front panel button, and it will be difficult to get them to change.  I guess that the error would remind them :-)

  Well, that's easy to fix - change the appearance of window properties if the toolbar is not visible, while the code runs, and there will be a pause button for your users to click.

  Many of our applications have a function somewhat like this.  My colleague implementation in a very simple way: he put the graphical indicator within a box structure.  Connect a Boolean control "pause" to the structure of the case, and that's it.  Data acquisition runs constantly but will only update the chart when the pause button is false.  This approach might work for you?

• Best way to share/update buttons on the front panel

  Hi y ' All!

  I am a beginner in LabVIEW (2 years experience: 1.5 academic year and a team of the FRC and professionnellement.5 of mentoring as a new graduate in a startup).

  We develop an application using LabVIEW which is intended to be user-friendly touch screen and we have so many front-facing button with which we are dealing. In order to make the code more readable in force and easily scalabe, I will like to know if there is an effective way to process orders from the front.

  To illustrate, let's say I have this UI:

  

  

  The real way we propagte these controls is to create a cluster of the reference of all controls (it's where I wish we had LabVIEW 2012-_-) once unbundle that we need in the appropriate section of the code (means it's a large number of sons everywhere...)

  

  So are there better ways to achieve the same goal?

  Thank you!

  I'm talking about a Controller of GUI in this thread. This can give you an idea.

  Ben

• Symbol of the three discs stacked to the left of the power button on the front of the CPU

  Pavilion p7_1070t CTO desktop PC

  What is the symbol on the left of the power button on the odf before the CPU?  It looks like three stacked discs and a light under the symbol flashes?

  Hello

  It's just a visual indication of when your drive is reading or writing data - so if it flashes quickly this would indicate a lot of hard drive activity, less when the LED flashes slowly.

  Kind regards

  DP - K