Move/copy files Windows 7 crashes

Similar Questions

• move/copy files

  I'm on a laptop running windows vista home edition and I want to move or copy a file from onedrive but if I try to drag it the file will not be going over the edge of the window... If I try to copy and paste the copy seems to work but when I try to stick the option isn't available

  suggestions?

  You cannot drag or copy / paste the files on the site OneDrive.  You need to right-click and choose 'download '.

• I get no audio from a saved windows movie maker file/windows xp

  I have no problem to connect my dv camcorder or no problem editing. Audio works while editing and preview, only after I have save the project that there is no audio data

  Try to save your project to AVI video format.
  and see if there is an improvement.

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

• Will be copied files Windows Vista 32 bit Media collection if the upgrade to Windows 7 64 bit?

  I currently have a Vista Home Premium 32, 6 Windows version and I'm looking to switch to Windows 7.__If I read, and buy the upgrade, will my Windows Media files from the collection copied to version 7 if I want to select the 64-bit?

  Questions about Windows 7

  Hello

  If the system is upgradeable to Windows 7 there should be no problem however things
  can and go wrong.

  1. make sure that you have backups. Redundancy is good, many using different methods.

  2. run the Upgrade Advisor and verification of the major features with the Compatibility Center.

  3. check with your system manufacturer and device BIOS manufacturers and drivers for
  Windows 7. Many manufacturers have special instructions and help to help upgrade
  for Windows 7. Many also have warnings on the traps, we should take account of.

  Windows 7 Upgrade Advisor - RUN THIS http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Find the center of compatibility (mainly original)
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I connect to my CC all tabs appear as assets except my files window, it crashes to the animation.

  went here App does not open. Wheel of progress turn continuously
  

  
  

  Tried logging and logging first.

  
  

  Tried to remove the OOBE folder, but there is no AppData folder and I made that display all the files and folder in the control panel. (Confusion)
  

  
  

  Then uninstall and reinstall but it keeps telling me and the uninstall program tells me - failed to uninstall creative cloud to desktop. You still have creative Cloud applications.

  
  

  Thinking maybe this isn't my problem so I stopped and went back to the cloud and it still crashes.

  
  

  Should I uninstall everything?
  

  
  

  Puzzled, worked a lot so far.

  Once you uninstall creative cloud you must rename OOBE to OOBE.old to the following location:

  Windows: C:\Users\[username]\AppData\Local\Adobe\OOBE

  Run the CC cleaning tool

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Install the creative cloud

  See if you face the same problem again.

  Concerning

  Varun

• How to move/copy files from Dropbox in Photos?

  With the help of 1.5 for OS X 10.11.6 pictures

  DVDYourMemories has invested hundreds of negative and digitized photos in folders DropBox.

  How to * get DropBox Photos or something that I can use to make a slideshow out of them?

  I don't want to have to download a single image at a time!

  As any photo - import it - application file menu Photos == > import - or select a photo, and then drag the Photo icon in the Dock or to the open window of Photos

  LN

• Expanding Cross dissolves on mov. the files cause first crashing?

  Hello Adobe community.

  I was wondering if anyone else is having the same problem;

  

  

  Strangely, this happens when dragging multiple clips with a cross dissolve (and sometimes even simply by dragging a clip it freezes).

  I already tried to create another project file in another scenario, but the error still appears. I have to work around by removing dissolves it and then adding them later.

  Hope anyone can help with that, or at least fix the bug.

  -John has.

  Try to export a PNG image instead of use the frame to hold.

• Windows Explorer crashes when you open any folder with MPEG2 files.

  WinXP SP3 - When you open any folder with MPEG2 files, windows Explorer crashes. If the folder contains only the MPEG1 files, it opens without a problem. We first thought it was a problem of media player, but we can not even click on a file to open it in media player.

  Hi kathyd,.

  ·        You did changes to the computer before this problem started?

  Since we do not know what is causing this problem, I'd suggest unanimous the event viewer on your computer and check the details in the window logs messages/error codes important related to the question, during the time where this problem occurs and after return.

  Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Access the link below to learn how to view and manage the event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  You can try to start both computers in safe mode and check if it can open the folder where the MPEG 2 files are stored and if windows Explorer crashes. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Copied file too big for 700 MB disc

  I use microsoft 97-2003worksheet I save to the documents in a file sent Insert DVD RW Drive (D :) Speed 1-4 CD - RW 700 MB.

  Duly filled format, copied file, window message file larger than the drive again "Try."

  Help, please

  Jim

  Jim,

  DVD can hold more than 4 GB of data.

  CD can hold about 700 MB.

  It seems you are trying to burn the file on a CD of s.

  Try inserting a flammable DVD in your player... and your document on the DVD burning.

• Explore Windows 7 crashes when you try to copy files, pictures, etc.

  I have Windows 7 and since a few weeks ago, every time I try to copy files, documents, photos from one folder to another or photos from my SD card to my computer, or unzip compressed files, when I try to paste, explore Windows crashes and closes.

  Can someone help me please.

  Thank you.

  If you mean that you see something like this:

  

  If this is the case, read this:

  Maybe you have a distressed Explorer Shell Extension.

  Several recent systems of the incidents involving Acer and MyWinLocker of EgisTec (which is already known to include some suspicious Explorer shell extensions) that could come preinstalled on your system.

  Even if your system is not at Acer there installed MyWinLocker and since there were many reports indicate that it contributes to crashes explore it seems a good place to start looking.

  If you look in your installed programs and find MyWinLocker or whatever it is of EgisTec and you don't know what that is, or why it is there consider just uninstall, restart, and then see how things work.

  If you have determined that MyWinLocker or any other program EgisTec intervene follow GP below, so you will be able to see all Explorer shell extensions.

  If you see all the extensions of EgisTec, software security PSD, eDataSecurity, DragDropProtect (they will be some of pink extensions) start with these first.

  If none of these things exist, continue:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display, choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  A user reported that it was necessary to restart the browser after each adjustment to do that press Ctrl-E since in ShellExView.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!

• Tecra S3 Windows Explorer crashes on copying files and other actions

  Tecra S3 Windows Explorer crashes frequently on the copy of files and other actions. In the system event log, you find the event ID 26 Application Popup Explorer.exe Application error problem (in Dutch: Toepassingsfout) read write memory error.

  Start the Softex Omnipass Service service. Change the startup type to automatic. The problem will not happen again. You don't have to use this application after the service started.

  Post edited by: wboere

  Hello

  Unfortunately, this path is not easy to say anything because, who know what did you do with OS and how is your personal configuration. If this problem occurs because some time roll back OS to an earlier time using System Restore tool.

  Also check this page useful http://www.helpwithwindows.com/techfiles/explorer-crashes.html maybe you'll find some answers there.

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How copy/paste or copy/move a file to another folder in Windows XP

  I need to copy/paste or copy/move the files from one folder to program existing to another folder.

  Use the movement commands to copy do?

  Hi Jimmyjack1941,

  I suggest you to read the following articles for more information.

  These are the items if you use the Windows Explorer to perform operations:

  To copy a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_copy_file.mspx?mfr=true

  To move a file or folder

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/windows_fcab_move_files.mspx?mfr=true

  You can follow these commands to move and rename the file or folder using the command prompt:

  Moves files and renames files and directories.

  To move one or more files:
  MOVE [/Y | /-Y] [drive:] [path] file1 [,...] destination

  To rename a directory:
  MOVE [/Y | /-Y] [drive:] [path] dirname1 repert2

  [drive:] [path] file1	Specifies the location and name of the file or files you want to move.
  destination	Specifies the new location of the file. Destination can consist of a drive letter and colon, a directory name, or a combination. If you move a single file, you can also include a file name if you want to rename the file when you move it.
  [drive:] [path] dirname1	Specifies the directory you want to rename.
  repert2	Specifies the new name of the directory.
  /Y	Deletes the request for confirmation that you want to replace an existing destination file.
  Y	Causes of request for confirmation that you want to replace an existing destination file.

  The switch /Y may be present in the COPYCMD environment variable. This can be derived with / y on the command line. Default value is quick to replace unless is running of command MOVE within a command script.

  Example:

  move c:\windows\temp\*.* c:\temp

  Move the temporary directory c:\windows\temp files in the root, this is of course assuming you have the windows\temp folder.

  Note: Microsoft does not move the files/folders installed application.

  Hope this information helps.

• How can I copy/move the files/folders to other files/folders in windows 7?

  Can you move or copy files or folders with the help of drag-and - drop in windows 7?  Can move or copy files/folders by right click Select copy/move files drop-down menu files, select the file and click ok in windows 7?  It's the easiest way to move/copy large files.  With fall and drag it moves only files unless it's external media then it will copy. What do you do if you need the same files in different folders?

  This is what you need:
  http://www.thewindowsclub.com/ultimate-Windows-Tweaker-v2-a-Tweak-UI-for-Windows-7-Vista

  Download and run as administrator and click "other settings"... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• Files copied to a motherboard crashed and trying to move to another location, but it misfortunes do not work.

  Original title: help can find

  went from vista to new computer.  Cannot return image of office-put files there, when recovered from fall of motherboard.    Need to have the view of all programs.  New computer won't accept my disk for adobe 9 photoshop elements, so can '; t update or download the program on the new computer.

  Hello

  I understand how it feels when you try to restore the files from the motherboard crashed to new computer and then you can not move files from one place to another place in the computer. Do not worry, I'm here to help you with this question.

  I would like to know more information about the issue, so that I could help you better.

  1. what happens when you try to move the files/folders?

  2. do you get any error code or error message?

  I suggest for the following articles in the help of Windows 7 and check if it works for you.

  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  If the links provided does not help then try to take ownership of the files/folders and check.

  Follow the steps to give permission to a file/folder in particular:

  a. Locate the file or folder you want to take charge.

  1. Right-click on the file or folder, click Properties, and then click the Security tab.
  2. Click Advanced, and then click the owner tab.
  3. Click Edit, and then do one of the following:
     • To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.
     • To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.
  4. (Optional) To change the owner of all subcontainers and objects in the tree view, select the check box Replace owner of subcontainers and objects .
  5. Make sure that you are able to access the program folder files in Windows XP of Windows 7 computer.

  Please reply with the status of the issue, so that we can better help you.