move the virtual witch distributed

Similar Questions

• How can I move the Virtual Mode of Windows XP hard drive to another drive

  How can I move the Virtual Mode of Windows XP hard drive to another drive?

  TIA

  Hi Benyl,

  The vhd in programfiles basis cannot be moved or renamed, if done, xp mode stops at the start.

  To move the files under c, first to boot xp, instead of save mode the machine virtual., turn it off. (settings to prompt the user for action narrow close). Close the machine virtual., and then choose stop. This will remove the vsv file. Do not delete the .vsv file because it contains data if you have not registered in the virtual machine.

  Now, move it "C:\Users\CHRIS.domainname\AppData\Local\Microsoft\Windows virtual PC\Virtual Machines\Windows XP Mode.vhd" to a desired location.

  Parameters of xp mode open, go to the hard drive 1 setting and reposition the hard drive to the new location of the vhd. You should now be able to start the virtual machine.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Expand or move the virtual machine to another partition / hard disk

  I tried to expand my 90 GB disk but nothing changes, i.e. the virtual machine is still to 60 GB. I have VMware Fusion 6 (Mac/Windows 10) and my VM is monolithic mode. In this true HD, I even 50 GB free and I can't increase the amount again in an attempt to rectify this problem and I can not to decrease either. I thought to change the location of the virtual machine to another partition/hd with more space, but I don't know how. So I need little help to choose and implements one of the solutions below:

  - or regularise space for the new amount

  - or move the virtual machine (vmdk) to an another partition/HD

  - or to convert monolithic mode to 2 GB split

  What is the best solution?

  Thanks in advance

  It's help me;

  Resize a Windows Partition with disk management tool

  When you maximize your virtual hard disk, you must also expand partition of your guest operating system to take advantage of the extra space.

  Fusion resizes the partition of the guest operating system when you resize the virtual hard disk. If you hold the Option key when you click apply to resize the drive, you can manually resize the Windows partition. For Windows 8, Windows 7 and Windows Vista you can use the operating system's disk management tool to resize a partition.

  Prerequisites

  Check that your virtual hard disk is large enough to accept the increase in the size of the partition. See resize a hard disk.

  Procedure

  1 right click on computer and select Manage.

  2. double-click on storage.

  3 double-click disk management.

  4 in the list, right click on the partition to expand and select Extend the Volume.

  5 follow the prompts to resize the partition and click complete and the question of the partition in the disk management pane displays its new size.

  6. close the computer management window

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• Cannot move the virtual computer to a different location to store data/all

  Hello

  I'm physical conversion into virtual machine using the VM converter. When I try this it I get the message error "the file is too big" or something similar. I did some research and realize that my block on the data store size is not large enough. Fine. I know how to format the data store so that it uses a larger block size. However, I need to pass the current VM to another location. I downloaded some of the smallest virtual machine on a local computer, but for most virtual machine I want to plug a USB hard drive in the server VM to move large virtual machine. How can I do this? Is there another way I can move the virtual machine to another location without hassle? I thought to plug a USB hard drive on my local machine and upload it.

  Any suggestions?

  Thank you.

  I also encountered this problem, and I solved a couple of different ways.

  1. If you have a UNIX server that is running NFS, you can configure a "dropbox" with 777 rights.  Then create a datastore NFS pointing to it, and then use the clone or clone for model option to copy in the NFS data store.

  2. use the product only settlement converter and convert them in one place.  Wipe the data store, reformat with the largest block size and then convert them back.

  Both works perfectly.

• Move the virtual machines to new storage device

  I recently added a storage IBM DS3200 SAS device to my VMware ESX 3.5 server.  I am running 6 VMs locally on the server and I would like to move the virtual machines to the new storage device.  I have formatted disks and the ESX Server sees.  What is the best way to move the virtual machines that currently reside locally on the external storage device?

  Thanking you in advance,

  Al

  I guess you could also try using converter

• Move the virtual computers folder to another computer?

  Hi, I would like to move the virtual computers folder of my laptop to a desktop computer much faster with several hard drives and space. This will have a new installation of VMserver 2.

  What I do on the new desktop so that the guest VM starts.

  On the laptop the VMserver is installed on the 'C' drive with the virtual computers folder on the disk "D". This may or may not be the case on the new office!

  Thank you

  Paul

  Should be relatively easy if you follow these steps:

  (1) stop (do not hang in the case has different chiptset between the two hosts) all running VMs

  (2) copy all of the files and folders that are there for the virtual machines that you want your host existing to the new, either to files in the existing data store or create a new data store that points to the folder heierarchy where you copy them on.

  (3) check files hard .vmx and ascii on arrival to ensure that they reflect the paths right on the new machine

  (4) in the web user interface, find the .vmx files and add them to the inventory (see screenshot)

  (5) check in the virtual machine network adapters are you like in case they are different between the two hosts

  (6) start them

• How can I move the "Virtual Machines" folder to the My Documents folder?

  VMwareFusion is to put the "Virtual Machines" folder in the Documents folder in the home folder (/users/ [username] / Documents), how can I move elsewhere (as/Library/Application Support)? The user Documents folder is not the right place for automated it system files, it is intended for personal documents.

  
  

  I am running VMware Fusion on OS X Yosemite (and the virtual machine is Windows 7).

  You can keep your virtual machines anywhere you want. Here are the steps to move:

  1 exit VMware Fusion. You can stop first of all of your running virtual machines.

  2. drag your virtual computers folder or the individual VM "files" where you / them. Filenames usually end in ".vmwarevm". There is no need to call the new folder "Virtual Machines" - you can call it anything you like.

  3. Launch VMware Fusion. If the library of the Virtual Machine window is not open, open it (Windows menu-> Virtual Machine library).

  4. ensure that all of your icons for the virtual machine are light gray and say "file not found".

  5. right click on each virtual machine in turn, and select Remove. When you are done, leave the window of Machine virtual library empty open.

  6. in the Finder, drag the icons of file virtual machine in their new location and drop them in library of virtual machines VMware Fusion window. Drop them one by one in the original order, you got, or rearrange icons later.

  7. run your virtual machines as before.

  When you create new virtual computers, navigate to the desired file before the Save.

  IMPORTANT NOTE: If you your folder of Machines ~/Documents/Virtual excluded from backups Time Machine, don't forget to change the exclusion to the new folder.

  Time Machine backups are not reliable for virtual machines. You must have another strategy. (I shut the virtual machine down, compress the 'file', and then move the compressed file to a folder that is included in the Time Machine backups. This isn't the only strategy, but it works for me.)

• Move the virtual machine from one host to another with shared storage

  Hello

  I have a question on how to move a virtual machine from one ESX 4 host to a host ESXi 5.  These hosts have access to the same shared storage but the ESX 4 host is outside the network and host ESXi 5 is inside the network so vMotion is not an option.  They are in different groups.  I know that there must be an easy way to move this virtual machine, but for the life of me, I can't find it.  I guess I have remove the virtual machine from the external cluster but how to make the virtual machine in the internal cluster?

  Thanks in advance...

  If both host access to the data store even where VM's store, just stop the virtual machine, remove inventory on ESXi 4, go to ESXi 5 vSphere vSphere, browse the data store where the VM is stored, do a right-click on the .vmx file and add to the inventory.

• How to move the Virtual Machine VMWare Workstation 10 to a completely different computer

  I have a laptop that is going to become my 'old' laptop, I bought and am always set up a new computer.

  I have a VM THAT evolution created on the 'old' portable using VMWare Workstation 10.  I installed the software VMWare Workstation 10 on the new laptop computer and am ready to move to the existing VM development since the old laptop again to continue the development of software on the virtual machine to the new machine.

  I never moved a computer virtual from one computer to another, and I guess that all I have to do is to copy and move the folder and all its content from the old laptop to the new, and then I'll be back in business?

  Just make sure it is this simple before doing so.

  Thanks for any input.

  It's as simple as that. When you start in the new machine, it should ask if you copied or moved. Answer that you moved it will keep the same MAC address and you will not be able to connect the two copies at the same time. You copied it saying assigns a new MAC and they both can connect, but a Windows machine can ask to reactivate. Seems to me he asked also to reactivate when I copied it for an Intel system AMD system, but it was a long time ago

  Lou

• Move the virtual machine to the workstation from 9 to 7 Workstation

  Hi all

  I have created a virtual machine (PBX) on VMWare Workstation 9 and I need to move it to Workstation 7.1.  I tried to create an ovf file using ovftool, but I couldn't expand the FVO on the side 7.1.  Is there anything else I can do to move the machine to the course?

  Thanks for your time.

  Martin

  "You can just copy the file to the virtual machine with all its files, this will keep even the machine virtual UUID and MAC address if you select 'I moved' we ' when you start the virtual machine after you have copied. However, before copy on the virtual machine, make sure that you go to compatibility mode (formerly hardware version) from the 9 VMware Workstation interface.

  André

• Storage vMotion - impossible to move the virtual machine

  All,

  I have recently upgraded to version 4.1 ESXi 4.1 U3 of VC2.5 ESX 3 vCenter Essentials - I decided to make my new vCenter server a VM - everything went well on the upgrade so I am now looking to do work on my storage system (EMC Celerra). I have virtually no space on my LUN and my CIFS shares are increasingly full also... However I have a file inside the EMC system which is 6 to size which houses a 200 GB LUN - it's the logic unit number that contains my VM vCenter. What I want to do is... move this vCenter VM off this LUN to local storage, reassign 6 TB to the pool file system and extend the 3 TB CIFS file system and then present the rest of the space as LUNS for VMware. My problem is that I'm not licensed for storage vMotion and they only way I can storage vMotion, VM off the coast of this LUN is to stop it and move it but because it's my vCenter Server I can perform this action by the customer.

  I guess I might need to drill holes in the host using putty to move the vmdk file, but I'm looking for any useful measure to enable me to move this virtual machine.

  Thank you

  If you are not allowed to Storage vMotion, then you can watch using VMware Converter and do a V2V.  Once the VM vCenter has been "copied" in the new destination LUN, it works, make sure that everything is right, then delete the 'old' vCenter VM disk.

• Move the virtual machine Linux from AMD to Intel

  Hi, I'm running several CentOS 5.4 and 5.5 virtual machines on an AMD64 based host ESXi 4. I need to replace the AMD ESXi 5 host and move the VM to host Intel based host with an Intel-based.
  
  I did it with a VM test (cold migration), and it seems boot, but I read that I might need to change the kernel for Intel.  Is this necessary?  If so, can someone point me in the right direction on how to do it?  Thank you!

  If the test computer worked then no there is no need to replace the core.

• Move the virtual machine from one host to another ESXi

  Hi all

  Quick question, if I wanted to move a virtual machine hosted on a server ESXi ESXi server what is the easiest way? Should I use the converter to do?

  Thank you

  ESXi 4.1 (Vsphere Hypervisor)

  So have free Vmware Vsphere Client

  In this case, the options are:

  • Standalone converter
  • Browser data store (download and transfer files)
  • SCP or FastSCP and then add the virtual machine to inventory with the browser data store

• Cannot move the virtual machine to another host

  Here's the situation... I am running 3 ESX 4.0 host in a cluster and I upgrade the memory on these hosts.  I put one day and now I want to use vmotion to move a virtual machine to host more memory, so I can then turn off host 2 to add more memory.

  When I try to migrate the computer to another virtual host he said "the virtual machine must be powered down for that purpose."

  I did it before with success when I first created this group with the HA and DRS settings are enabled.

  Now, I can't do this and I don't know what setting or what changed to cause it to not allow me to manually migrate a virtual computer on one host to another.

  If I wanted to put an ESX host in "Maintenance Mode" thinking that it will automatically move all VM for 2 other hosts in the cluster is not it either... I get a message saying that ' a host into maintenance mode does not any virtual machine functions... blah... blah... and continues to complete the entry into maintenance mode, all virtual machines must be closed or moved to another host. "  Manual intervention may be required.

  Again, I think that if a host is down these VMs would be move... that of the whole point of a cluster but doesn't seem to put in maintenance mode to allow them to go unless I turn off the virtual machine

  Any ideas?

  Go is one of the requirements of vMotion. The message after you had corrected the condition, I'm sure would be erased after awhile.