Move to a specific point in video playback

Similar Questions

• Media Center crashes during video playback of need to hard reboot.

  Hi, any help would be greatly appreciated as this has been driving me crazy for several days of attempted troubleshooting, Googling, try many things to fix it... first of all let me apologize in advance for the length of my post but I wanted to give as much information as possible to help anyone trying to rule out things...!

  OK, so the problem...

  I installed Windows 7 Ultimate 32 bit as a clean install on my HTPC, after the first do a complete 1 & 0 format of the hard drive that had previously installed Vista Home Premium, installation went well and I proceeded to install all updates to Windows, and then update drivers for all my hardware.

  The system is used only as a HTPC, it's my only TV and video playback device, (so reliability is essential for me) and it is connected to a defintion of Sony, 44 "Widescreen Rear Projection TV Standard, via S-video, with audio goes to a system DD/DTS 5.1 Surround Sound Speaker Logitech z5500, via a sound card by using the optical cable (specifications of the complete system below).  The system worked flawlessly more of one year using Vista SP1 32 - bit, until I upgraded to Windows 7 Ultimate on the hardware configuration identical.

  Since installing Windows 7, it worked fine for the first week, not a single problem, I am housebound are disabled so that the system is in continuous service 24/7 and he had no problems in the first 10 days, however all of a sudden I'm getting now random freezes requiring a hard reset , but it occurs during video playback of any of my 3 hard disks, or when you try to play a DVD in Media Center. Which led me to think it is associated video (problem of driver or hardware fault) card, disc or HARD associated.

  Frost can occur sometimes, after a few minutes of reading, or sometimes after a few hours, requiring a restart of the hard to get the sytem to answer.

  Reading of the TV via the TV Tuner card is not affected, its only when playing of stored content (MPEG2, h264 .mkv .avi files or DVD) are all media SD HD and all played fine for the first few days.

  Intermittent freezes occurring could block the system completely freeze the image and audio and all activities, nothing would work at all, I tried windwos keyboard, ctrl alt del, nothing at all, to do a reboot hard to recover the system, it can then be either minutes or sometimes an hour before the same thing happens again. I tried to use different video files in the case of the corruption of files, different DVD to exclude damaged disks, same result.

  System includes:

  1. Map - mother ASUS M3A32 - MVP Dlx, Socket AM2 +, 790FX/SB600 chipset, BIOS v.2003
  2. Operating system - Windows 7 complete edition 32-bit Retail (clean install, all the Windows installed updates)
  3. CPU : AMD Phenom 9950 Quad Core @ 2.6 Ghz (stock)
  4. RAM - 4 GB Patriot Extreme Performance DDR2-800 5-5-5-15 2T
  5. Graphics card - ASUS Nvidia 8800GTS @ settings inventory 320Mo
  6. Sound card - card of ASUS Xonar D2X PCI-E
  7. Card TV Tuner - Hauppauge PCI-E WIN - TV Nova S more DVB - S directly connected to the flat outer of satellite, with remote control IR IRBlaster
  8. Player - optics Sony/NEC Optiarc DVD - RW Labelflash
  9. HARD drive 1 - (Startup disk) Samsung Spinpoint 160 GB SATA II
  10. HARD drive 2 - (Only for TV recordings) Hitachi 160 GB SATA II
  11. HARD drive 3 - (Storage media) Maxtor 1 TB SATA II
  12. Netwrok adapter- EDIMAX PCI 54 g Wireless Adapter - uses a RALINK driver
  13. Keyboard1 - Logitech Dinovo Mini Bluetooth wireless keyboard
  14. Keyboard & mouse 2 - Logitech MX3200 wireless mouse/keyboard combo
  15. Speakers - Logitech Z5500 5.1 Digital Surround Sound via Toslink optical cable connected to the ASUS Xonar Sound Card S/PDIF optical

  All the material above has had pilots upated since the sites of respective manufacturers, including BIOS of motherboard, chipset, graphics card, network card, sound card, card TV, keyboard (Logitech Setpoint) etc... etc...

  Initial added after Clean install software:

  1. Internet Security - Comodo Firewall v.3.13.126709.581 (updated daily since installed)
  2. Antivirus - Alwil Avast Professional 4.8 v (update daily & daily analysis of all local drives)
  3. Browsers: Firefox v. 3.5, Google Chrome
  4. MCEBuddy v.1.1 - for automated video Conversion of MCE .wtv smaller file size .avi TV recordings

  All of the above software has been installed by using the latest available versions downloaded from the manufactuer sites, which claim to support Windows 7 and all have been updated regularly since its installation.

  I have tried many of the suggestions I've seen posted to try to solve this problem, including:

  1. Uninstalling and reinstalling Media Center and WMP
  2. Disabling subtitles in Media Center
  3. Disable unused mobo onboard devices in the BIOS
  4. Update BIOS
  5. Updated all drivers
  6. Disabling Control Panel Nvidia PhysX
  7. Disabling the Enhanced Sound features for reading devices
  8. Run CCRegistry cleaner
  9. Run many Virus scans nomral mode and safe - no problems found
  10. Don't run the Checkdisk on all HARD drives - no problems found
  11. Run the SeaTools Diagnostic tools for HARD drives - all disks HARD discover OK
  12. Tried playing files AVI of HDD separated to avoid a HARD drive problem - same problem occurs on all readers
  13. I tried change graphics card for an ATI HD4850 with the latest ATI drivers - same problem.
  14. Tried to change the audio output S/PDIF instead of Xonar Soundcard onboard - same problem occurs
  15. Tried the Windows 7 repair facility - problem persists.
  16. Tried to uninstall all updates of Windows -same problem
  17. I tried the system restore to before the occurrence of the problem started - no help
  18. tried to re-downlaoding all hardware drivers updated and re - install in the case of a corrupt driver download - no chance even problem

  Essentially none of the abvoe helped to solve this problem, and it becomes really frustrating to have to restart the PC again and again trying to watch a recorded video file or DVD.

  After remove all the above I can only assume that it is a problem with Windows 7, needing a fix of the millisecond.  At least I think that I've exhausted everything I can try... ???

  With what is my HTPC, if I can't perform reliably, I have to reinstall Vista, Vista was not the best OS, but at least it was reliable for me in terms of my HTPC.

  I was really eager to get Windows 7, I used the RTM version on my netbook for some time before I made the decision to purchase the full retail version for my HTPC, and never had any of these problems with my installation of netbook that I used for playback of media files from an external USB HDD.  So I'm really disappointed to have these problems after doing all that I could to make sure that Windows 7 would work OK.

  If anyone can give me any suggestions of what I can try, anythign I can too watching, or if someone has hada similar problem and found a solution for him... Please, please, post more details, because I am really at my wits end now and have to resort to watch the recordings on a 10.2 "screen of my netbook with some speakers of the small laptop usb, after spending so much money on my system and surround sound Setup HTPC, its devastating to think that I'll have to go back to Vista...

  Absoultely ANY suggestions would be appreciated...

  Thanks in advance for any help and once again, I'm sorry for the length of the post, if there is more information needed I've not provided above, please let me know and I will try to publish as soon as POSSIBLE...

  After the forum of scouring and reding of countless discussions, it seems, there is some sort of problem with Media Network Sharing tha could be the cause of this problem, as many people have reported that disabling wmpnetwk.exe in the Services.msc solves the problem.

  It's not an ideal solution for me, as I have a HTPC in the room that I play media from the main HTPC downstairs and all the hype MS seemed to suggest that Win 7 is it is much easier to achieve, and has been one of the main points of sale used in one of their commercials for the operating system.

  This my MS you need to pay attention to this problem and work towards a solution and allow users to know when the solution has been provided, probably have a service that must be disabled to let the operating system work reliably is quite counterproductive.

  Nobody seems to answer my post above with other suggestions and wmpnetwork.exe disable workaround was published last November, all the while still there is no permanent solution...?

  EDIT: Just to confirm this wmnetwork.exe Netwrok disabling media sharing in the services, as well as disabling the media streaming in the Netwrok Sharing Center > advanced sharing Options, solved the constant crashes for me.

  So all the MS speak of 3rd party drivers for the cards video and other material or material defects are to blame, it's total BS, the only problem is to do with Windows and Windows Media Sharing, lets hope, they decide to do something to fight it... !!

• iOS 10 video playback stops working until you restart

  I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

  Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

  The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

  Hello, Sunkai!

  Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

  I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

  Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

  1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
  2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
  3. Try a different network.
  4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
  5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

     If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Flash crashing and video playback/Streaming problems

  Recently did a reinstall of Windows 7 and have experienced problems with Flash and video playback in general. Questions may or may not be related. I have not detected problems with the opera and so I think that these are problems of Firefox. 3 major video sites that I use are (HTML 5 player) YouTube, twitch.tvand Crunchyroll.

  (1) flash very quickly and systematically accidents

     * Specifically noted when viewing streams on twitch.tv
     * Often crashes within a minute, almost certainly within a few minutes
     * Crash logs provided below
  

  (2) reading crashes

     * Occurs on all 3 sites
     * On twitch, stream freezes (but Flash does not crash). On YouTube, loading circle comes up and video freezes
     * If this occurs on twitch, Flash less likely to officially crash
  

  (3) volume cuts

     * Occurs on all 3 sites
     * If this occurs on twitch, Flash may still crash after
     * I've had volume issues with my system in general, with volume occasionally cutting in gaming programs, such as League of   Legends and Hearthstone. That being said, I do not experience this issue with Opera and this only occurs on video playback in Firefox.
  

  Flash Crash IDs:
  BP-8e2f650d-7fc2-4235-a864-ef4282151205
  BP-a6760c7c-c561-4be5-BD48-bea1f2151205
  BP-82dee164-B506-4282-BCA7-6f18a2151205
  BP-ef411a19-00B9-4406-B91F-bd0572151205
  BP-2cee7e29-008C-4e6f-9FAA-eea992151117

  Attempts at Solutions:

     * Disabled hardware acceleration in Flash
     * Reinstalled/Updated Flash and (I think) made sure there is only one version of Flash
     * Reinstalled/Updated Firefox
     * Cleared cookies/cache/other stored web data
     * Updated all drivers
  

  I wouldn't stop using Firefox as my preferred browser and works fine on all my other devices, but if the problem persists, I'll have to. Any help or insight is appreciated!

  Unfortunately, I have tried all fixes of cor - el without success.

  However, I started to use audio drivers Realtek instead of Microsoft and everything seems to work more smooth. Will update later when I did several tests.

• Spectrum of HP 13-3004tu Ultrabook: video playback choppy after you install the latest video drivers

  I upgraded my video drivers (Intel high definition (HD) Graphics Driver 10.18.15.4248 place) for my Ultrabook 13-3004tu of the spectrum and after reading so online video (YouTube, videos on the sites of integrated information ect) play jerky and the sound is distorted. He was going well until I downloaded the new driver.

  Hello @kiwifruit28,

  Welcome to the HP Forums!

  I have read your message and understand that after updating the graphics driver, your spectrum HP 13 - 3004tu Ultrabook there are problems with the video playback. Here is a document to help solve this problem. Here is a link to HP hardware Diagnostics where you can test your hardware for portable computers. Alternatively, you can do a System Restore to a point before the end of the update of the graphics driver.

  Thank you.

  If this post helped you, feel free to click on the thumbs up!

• HP envy: improve video playback

  polishing break when trying to play videos on fb twitter ect ect

  Benny_McNair54 wrote:
  

  polishing break when trying to play videos on fb twitter ect ect

  Make, model, speed ISP? There are many factors that affect internet video playback as well as the specifications of your hardware.

• Satellite L305-S5921 - video playback is fuzzy, not clear

  I hope this isn't a double wire - I have done several searches, but couldn't find it, so forgive me if I missed it.

  In any case, I bought the L305-S5921 a couple of months. It's a great phone for the price. My only complaint is video playback - it is not at all crispy and is rather blurry. When I watch DVDs and watch videos of resolution "superiors" on Hulu, it's blurry (Note: 'High resolution' Hulu is 480 p).

  I tried to adjust the resolution of the laptop before video playback, but it doesn't seem to help.

  I read a review of this laptop on the review of a store page, and he said he had to change video playback. Someone has any idea how to "fix" it? I couldn't email this person, as it was anonymous.

  Or, do you know if any programs (like ffdshow) will help? I think this can help with the DVD, but does anyone know if it would help with streaming from Hulu?

  If you can help, please be as explicit as possible - I have some technical knowledge, but this problem seems to be beyond my comprehension!

  PS - everything on this laptop looks great - photos, games I play (not too demanding of salvation graphics, etc...). It's weird because I've had this laptop to replace your old desktop (7 or 8 years old) that I had (with a CRT monitor). But, this monitor seemed better on video than this laptop brand new with a resolution of more than world!

  Thanks in advance!

  Hello

  Especially videos that are broadcast from different pages are saved or transformed in low resolution.
  Why?
  Due to the transfer of data high.
  Movie files high resolution are too large to download common or upload.

  So if you scale movies in full screen, then it might be possible that the resolution of the film would not be perfect.

  But this isn't a number of laptop but it s files of movies that are broadcast from different pages like youtube or hulu

• video playback iTunes 12.3.1.23 does not

  I've recently updated OSX Yosemite 10.10.5 and 12.3.1.23 iTunes on my MacBook.  My iTunes will now play songs, but video playback for TV shows/movies that I purchased through the iTunes store does not.  The video player is still black, and there is no sound.  The files have been downloaded to my MacBook and do not play in iCloud.  Ideas or suggestions?

  I tried iTunes closing and restarting the computer.

  I also tried to change my preference of video playback 720 p 1080 p, as suggested in another thread.

• ProBook 450 G1: Question of Probook of video playback in G1 of the 450 after upgrade to Windows 10

  Hello.

  Issues (stop, shaking in the video and sound) are multiply video playback after upgrade Windows 8.1 for Windows 10.

  Questions for:

  -Playback (avi, mkv, mp4 etc.) VMP Movies & TV AND;

  -Playback of video from Youtube by Edge and IE11;

  -Video playback in games.

  NO problem all does to (workaround):

  -Reading of files (avi, mkv, mp4 etc) by VLC player.

  -Video playback from Youtube through Firefox.

  Not any way to workaround that emit in the games: its integrated use of resources of the browser.

  VLC uses own video codecs, so I think that this emission source is possibly in embedded Windows 10 codecs?

  Drivers:

  Intel SoftPaq Download Manager Video drivers (latest for Windows 10: technical support site the same as at HP).

  AMD drivers for Widnows 10 SoftPaq Download Manager (the same that at HP supports the site) is buggy and causes crash (the "internal power error"). If Catalyst drivers from AMD (latest from Windows 10) site.

  Additional drivers, also upgraded for Windows 10 (via the SDM for Windows-10): chipset keeps drivers, WiFi, 3D etc.

  Any ideas?

  Problem has been resolved by unistalling HD Audio drivers (installed on Windows 8.1 early HP).

  After the reboot, the drivers HD Audio was automatically installed and then updated via Windows Update.

  Video playback is now correct through no fault inside any software (IE, edge, WMP etc.).

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• No picture for video playback in WMP12, VLC or QT but don't brush on video playback in IE or Firefox for example with Youtube

  Very strange, recently my main account on desktop PC does not display a picture on the video playback but video playback works fine on any other user accounts on the same PC.  I rebooted WMP12, AMD video card drivers, flash, etc. QT.  Run the WMP rearmament as suggested in these pages.  However, there are no drivers or CODECS because on the other account user video playback works fine.   Windows 7 Edition Home Premium on the desktop with a two year videocard, AMD - all standard hardware that worked well before.

  I don't see what is different in this user account.

  Ideas?

  Hello

  Video content probably uses a compression codec that is not installed on your computer.

  This problem is specific to a particular video?

  Check out these links and follow the steps to solve the problem:

  http://support.Microsoft.com/kb/265523

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

  Please let us know the results.

• Problem with WEI: could not measure the performance of video playback.

  Hello, Microsoft

  First of all I'm new to the forum, Please warn me if I posted in the wrong section, or did something wrong.

  I have a laptop, (x 86) Win7 Home Premium. Before posting, I tried everything Microsoft sugguests and nothing will do, as the update of the graphics card, etc. WEI did not work as usual today, I got the problem said: could not measure the performance of video playback.

  Here is the winsat.log

  180337 (1304) - winsat\logging.cpp:0815:-BEGINNING 2014\1\23 20:20:42 -
  180337 (1304) - winsat\main.cpp:4301: command line = "C:\Windows\system32\winsat.exe" formal - CancelEvent 0f602be3-3268-4fb8-be81-0ebe47022e9b
  180337 (1304) - winsat\processwinsaterror.cpp:0095: ERROR: tried to read resource strings, unknown exception occurred
  180352 (1304) - winsat\main.cpp:4474: > IsFormal is TRUE IsMoobe = FALSE.
  180399 (1304) - 4585: Watch dog system active
  180399 (1304) - winsat\main.cpp:4600: watch dog timer 600.0 seconds hand
  181491 (1304) - winsat\main.cpp:2505: > DWM doesn't work do not.
  181491 (1304) - 2470: > EMD service will be restored to the exit.
  181507 (1304) - 0983: > read the active power as «381b4222-f694-41f0-9685-ff5bb260df2e» mode
  181507 (1304) - 2793: > power policy saved.
  181928 (1304) - winsat\syspowertools.cpp:1015 >: 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c value of the power system active"
  181943 (1304) - winsat\main.cpp:2814: > policy set to maximum power.
  183020 (1304) - winsat\logging.cpp:1763: ERROR: phase enter/leave imballance
  183020 (1304) - winsat\main.cpp:0948: > IsOfficial = TRUE IsFormal = TRUE IsMoobe = FALSE RanOverTs = FALSE RanOnbatteries = FALSE
  183035 (1304) - winsat\main.cpp:1775: > Run Assessment features
  183566 (1304) - winsat\main.cpp:1775: > Run Assessment dwm - aname DWM-time 10 - fbc 10 - disp off - normalw 12 - width 1280 - height 1024 - winwidth C (1144) winheight - C (915) - rendertotex 6 - rtdelta 3 - nolock
  184190 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184190 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  184190 (1304) - winsat\main.cpp:2037: > DWM Assessment results treatment SUCCESS
  184190 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  184767 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  184767 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  185344 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185344 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  185906 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  185906 (1304) - winsat\main.cpp:1775: > Run Assessment d3d - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  186467 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  186467 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Batch - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt c, point 10 objs - C (26) - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187013 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187029 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Alpha - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 300 - batchcnt C (75) - C (26) objs - rendertotex 6 - rtdelta 3 - texpobj c (1)
  187591 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  187591 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname Tex - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - texshader - totaltex 10 - texpobj c (4) - rendertotex 6 - rtdelta 3
  188168 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188168 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname ALU - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 500 - batchcnt C (125) - C (20) objs - noalpha - alushader - totaltex 10 - texpobj c (1) - rendertotex 6 - rtdelta 3
  188730 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  188745 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomF4-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 150; 200; 241 - batchcnt C (50); C (200); C (300) - objs C (12); C (26); C (45) - noalpha-geomf4shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189291 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189291 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname GeomV8-time 7 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75; 100; 120 - batchcnt C (25); C (100); C (150) - objs C (8); C (17); C (29) - noalpha-geomv8shader - texpobj C (0) - rendertotex 6 - rtdelta 3 - tierframes 60 - tiertime 1
  189868 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  189868 (1304) - winsat\main.cpp:1775: > Run Assessment d3d-dx10 - aname CBuffer - time 5 - fbc 10 - disp off - animate 10 - width 1280 - height 1024 - totalobj 75 - batchcnt C (25) - objs C (8) - rendertotex 6 - rtdelta 3 - texpobj c (1) - cbuffershader - cbufa 2 - cbuff 5 - cbufp 6
  190430 (1304) - d3d\dx9misc.cpp:1030: error: could not start the events of the kernel trace log
  190430 (1304) - winsat\main.cpp:1775: > Run Assessment mfmedia-input C:\Windows\Performance\WinSAT\winsat.wmv - nopmp
  190804 (1304) - media\mediaerror.cpp:0151: mfmediatest.cpp @ 445: 0 x 80070070 == ERROR_DISK_FULL
  190804 (1304) - media\mediaerror.cpp:0095: error: failed to start NT Kernel Logger.
  190820 (1304) - winsat\main.cpp:2056: > assessment mfmedia FAILED because of an error
  190836 (1304) - winsat\processresults.cpp:4018: > wrote bandwidth video memory to register 0
  190836 (1304) - winsat\processresults.cpp:1274: not limiting DWM Score 1.0 - no DWM performance score
  190836 (1304) - winsat\processresults.cpp:1405: this WDDM, considering D3D score 2.0
  190836 (1304) - winsat\processresults.cpp:1480: > partition disk writes in register 0
  190960 (1304) - winsat\syspowertools.cpp:1015 >: 381b4222-f694-41f0-9685-ff5bb260df2e value of the power system active"
  190960 (1304) - winsat\main.cpp:2855: > state restored power.
  190960 (1304) - winsat\main.cpp:2870: > Successfully reenabled EMD.
  190976 (1304) - winsat\main.cpp:2896: > SystemRoot Composition
  190976 (1304) - winsat\watchdog.cpp:0311: Watch dog system shutdown
  190976 (1304) - 4909: > exit value = 1.

  Please help, THX 1 billion

  Hello Derek,.

  Please keep us updated on the status of the issue.

  I'm sorry for the late reply.

  The IFE can be used to show what part of the system should provide the largest increase in performance when it is upgraded. For example, a computer with the lower under-score in his memory, would benefit more than an upgrade of RAM to add a faster hard drive (or any other component).

  Also see this article:
  What is the Windows experience index?
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-experience-index#what-is-Windows-experience-index=Windows-7

  I hope this information helps.

  Thank you

• I have a thumping sound during video playback.

  I have a computer Dell Inspiron 1545, 64-bit laptop, equipped with Windows 7 family Premium SP1. During video playback, streaming online or a video on my computer, I get a noise very loud from time to time. It is almost an audio feedback effect. Sometimes the video hangs at the noise. I've updated the audio drivers; I deleted the audio driver in the Device Manager and rebooted I tried another card sound and different speakers. Nothing works; I always get the noise and the occational of freezing. I read a lot of articles online from other Windows 7 users, indicating the same problems, so I have to believe that this is a problem with Windows 7 itself. If you go on Bing and just type in Windows 7, this site and others coming, talking about sound and freezing problems. What is the problem with Windows 7 and what is Microsoft going to do to correct the problem? I often have to connect my laptop to my TV for playback of movies, but the noise is very discouraging. Help!

  Hey,.

  Follow the methods provided by bluto32.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/automatic-volume-leveling-during-audio-playback/f9656c4a-B5E7-4cff-B029-7577f0efa549?TM=1371183288230

• Choppy video playback in Windows Media Center (Windows 7) WTV

  I recently experienced a video playback jerky with windows media center.  Sometimes the recorded TV (WTV format) play very well for about 2-3 minutes until the video playback is very jerky (probably about 5 to 10 frames per second instead of the usual 30-60 fps).  The audio is not again normally.  Windows Movie maker also plays choppy video (Windows Media Player seems to work very well).  The main menu of Windows Media Center, itself becomes generally restless slow when I'm scrolling autour options, even when there is no video game in the background.  Video streaming on the Internet and DVD seems to play fine on Windows Media Center, and I can even stream HD video without problem.  I also know that this isn't a problem receiving the TV tuner since I test with the video recorded previously.  I bought my computer in June 2009 with Windows Vista and upgrade to Windows 7 a few months later.  Everything worked perfectly well until recently.

  I tried to update my video card drivers, reallocation of Windows Media Center to a task of "high priority" to improve performance, the RAM Cache to improve the performance, my graphics card setting to low quality setting to have superior performance to compensation.  I even tried to reinstall Windows Media Center, reinstall Windows Media Player and the restoration of my entire computer to a State a few months in the past where the problem was not intervened.  The memory usage seems OK too (I have 6 GB).  Basically, I don't think that the issue is performance related.  I'm guessing that there is some little conflict, pilot program, codec, etc., which is originally the video playback to go bad after a few minutes.  Any thoughts?

  Here is some info on my Page "system information":

  Microsoft Windows 7 Home Premium
  HP-Pavilion
  System Type x 64-based PC
  Processor Intel (r) Core (TM) 2 CPU Quad Q8300 @ 2.50 GHz, 2500 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 5.43, 10/09/2009
  SMBIOS 2.5 version
  Physical memory (RAM) installed 6,00 GB
  6,00 GB total physical memory
  4.33 GB available physical memory
  12.0 GB total virtual memory
  9.56 GB available virtual memory
  Page file space 6,00 GB

  NVIDIA GeForce 9500 GS
  Adapter RAM 512.00 MB (536,870,912 bytes)
  Installed Drivers nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um
  8.17.12.6099 driver version
  File INF oem80.inf (section Section004)
  32 bits/Pixel

  For what it's worth, I was faced with the problem of stuttering for always (continuously from a WHS for a HP Media Center Extender) and had tried all of the recommended patches (updates driver, network card settings tweaking, etc..)  Nothing helps.  Last week my router died (Netgear WNDR3700, who was the State of the art when I bought it a year ago).  I replaced it with an old but unboxed Linksys WRT320N and stuttering all my problems disappeared.

• Sound does not, slow/choppy video playback. Reboot to fix.

  I have a problem with my PC.  Don't know if a hardware error or system.  It is common during video playback.  Usually, he plays very well, but sometimes brutally, everything is in slow-mo with no sound. The only way to solve this is to restart the PC.  On most pages, it makes also has flash declined. Tried to stop all services and unnecessary processes, virus checks, updated windows and the latest video card drivers, card sound, etc.  Not sure how this can be fixed.  Extremely boring all playing a game and my sound dies.

  Hello
  OK, this is the driver related or heat related.
  1. set to update your video and sound drivers restart and try again.

  Look for the old drivers Device Manager and update

  Drivers can become outdated and could be damaged to the point where they slow the system performance. Looking for the old drivers Device Manager, follow these steps:

  Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

  Click the Hardware tab, and then click Device Manager.

  Right click on the device, and then click Properties.

  Click the driver tab.

  Compare the version of the driver on the tab, with driver version information on the latest version of the driver that is published on the website of the manufacturer.

  To resolve problems that are caused by corrupted or outdated drivers, install the latest drivers:

  Click Start, click Run, type the sysdm.cpl in the Open box, and then click OK.

  Click the Hardware tab, and then click Device Manager.

  Right click on the device, and then click Properties.

  Click on the driver tab, then click on set to update driver.

  Follow the instructions on the screen to complete the update of the driver.

  2. check the power of your computer, especially near the card... check video to make sure that this video card is not loose (if it is not a card on board)
  Eddie B.