Movements of mice in two monitors problems

Similar Questions

• Keyboard shortcut to move a window between two monitors instead of drag and drop.

  I want a quick way to move a window from one monitor to the other in a double configuration monitor without having to drag the window with the mouse. This is particularly useful for full screen windows since to move, I have to exit full screen, catch them with the mouse and drag them to the other monitor. Ideally, I want something I can do with a keyboard shortcut.

  I don't know if this exists, I couldn't find it in a list of keyboard shortcuts. I think it would be an improvement for anyone to use multiple monitors which has good reason to need do to switch between several programs. Since windows looks at multiple monitors and identifies each in the settings of customization like 1, 2, 3, etc, it would make the most sense for me to have one high and one low. So if I have a window screen 2, I can hit a keyboard shortcut to move it to the same spot on monitor 1 (low) or monitor 3 (upwards).

  Maybe it exists in form some and I don't find it not, but if not I think it would be very useful, especially for anyone doing graphic design or programming work.

  (Also I filled out the form for that matter like windows 7, which is what I use at home, but he put it under the XP forum since that is what the computer I write from is running on.)

  Use the following key combination to switch between screens.

  "Windows key + SHIFT + key.

  Detailed instructions:
  Press in and hold the Windows key and then add and hold down the SHIFT key. While now hold both hit the left or right arrow key to move the current active window left or right.

• Some subtle problems with two monitors on Windows 7

  I used two monitors with your Windows 7 Desktop for quite awhile and I just had to replace a.  This is a problem which is probably easy to fix, but I don't know how to do it.

  I figured out which monitor, I wanted to just in front of the keyboard (the larger one) and that I wanted on my right.  The new is more.  They both work very well, but there are two problems:

  1. the office and the taskbar are in the older monitor to the right - I do not know how to move.

  2. the mouse is confused.  He considers that the monitors are in the reverse position.  In other words, when the mouse is moved on the screen to the right, I have to move it OFF THE RIGHT EDGE OF the SCREEN to enter the screen on the left.  I know that I can get used to this, but I'd rather not have to.

  Thanks in advance.

  DK

  Right-click on an empty space on the desktop and choose "Screen Resolution."

  (or Panel of-> screen-> the resolution).

  Above under 'Change the appearance of your screens', you should see two icons of the screen display.  Simply slide one on the right to the left of the icon on the left (so that they switch positions). Then press "OK" your way out.

  To select the screen that contains the task bar, select the icon for this monitor in the same screen as above and a small box should appear below the "Multiple displays" line that says 'Make this my primary monitor '.  Just check this box and OK your way out.

  HTH,

  JW

• When you use two monitors Media Player will not playback on screen #2 video (not a problem with the monitor #1).

  I'm sorry for the long post, but this is the type of problem that is easy to explain in person but if transported by writing it might take a little longer for the sake of the definition. Please read on without fear because this problem is not as complicated as you might think, I hope.

  I use two (2) screens of computers with the same system but why Media Player does not work on a single monitor and not the other monitor?

  I use two monitors with my PC thanks to the CLONE function and things last a lot. #1 monitor is a computer 19 "monitor. Monitor #2 is at the end of the piece. VIZIO, the manufacturer, markets a monitor #2 as a computer screen, nope, it's a 47 '' Vizio HDTV that I use as a computer screen. I use the installation without any problems for over a year now until yesterday. The problem: now, when I use two monitors to play a video, the sound will play but not the video. What I see is a black screen empty. This negative situation applies to only monitor the #2 and does NOT monitor #1.

  > very important Please note... when I have both monitors running and I play a video that you can actually see the video play on the #1, the 19-inch video monitor! There is absolutely nothing wrong with the video player when it runs on the small computer screen 19 inch. But when you turn your head to look through the living room where I Monitor #2 placed you won't see the video running on #1 monitor as you normally would before that dysfunction appeared. (No, instead of this you will see the Windows Media Player (or Nero or RealPlayer) readers 'playing' a black screen blank even if 1) both monitors are indeed cloned and 2) video plays without any problem on monitor # 1. Monitor #2 with media work (sort of) because the volume level is adjustable, and you can see the bar jump up and down and all around media player progression but the problem is that there is simply no video when you try watching the video on a monitor #2.

  > except to play videos through a Player multimedia, I can use my Vizio TV as a monitor for what is related to the computer, there is no another negative question. I can surf the web, edit videos, etc. When I run a video from Youtube to my computer the monitor #2 TV Vizio, the Youtube video plays well. Ditto for Netflix, no complaints there. In fact, I just typed this post on and displayed using Monitor #2... But if I want to watch a video that I saved in a folder XP then the only option is to use the #1 monitor.

  Thanks in advance for your help :)

  Do restore of the system as a first step. If this fails,

  1. uninstall all software of Monitor 2

  2. unplug the monitor 2

  3. restart the computer

  4. connect the monitor 2

  5. install all the software monitor

• Win runing XP two monitors in DualView mode and not remembering the last size and location of the records? How to solve this problem?

  I am running WinXP SP3 with two monitors running in DualView Mode and everything worked as expected until I installed the latest NViDIA drivers.

  After the update of the pilot, all windows and folders open centered on the main display and all pop-up windows from any open window, centered on the secondary display.

  Any changes to the size and the location of the windows and/or files is not saved.

  I searched the Internet for solutions and found nothing.  I tried Microsoft FixIt to the more obvious (said) problem similar to mine and it did not fix the problem.

  I finish the registery fix suggested and it fixed the problem.

  Any suggestions?

  Please notify.

  Roger P. Hendrix

  Hi Roger,

  1. have you tried to uninstall the Nvidia drivers (if you do not want to make install)?

  Follow these steps and check if the problem persists.

  Step 1:

  Uninstall the Nvidia drivers and check if that helps.

  a. Click Start, click Run and then type devmgmt.msc.
  b. right click on my computer and click on manage, and then click Device Manager.
  c. right click on my computer, click Properties and click the Hardware tab, then click Device Manager.
  d. click right Nvidia drivers and uninstall it.

  Step 2:

  Do e restor systemto the point that your computer was working normally and check if that helps.

• How can I move my cursor back between two monitors?

  I have two screens and I would use two separate software at the same time.  To do this, I need to know a quick way to move the cursor back between the two monitors.

  Thank you

  Doug AC

  The only way is to drag your cursor to the other monitor.

• Using two monitors. Impossible to move image Adobe CS6 right monitor.

  Is it possible, when using two monitors, to any frame CS6 either monitor? Right now it is cemented just to my left monitor, and I want it on the right.

  Well well, after a few frustrations and poking around I finally thought to it guys.

  In the Illustrator menu bar, click "Window", then "Application Framework". It seems that the unchecked option will leave the application 'attached' to your primary monitor. Audit, he will place the application in a window of 'free form' that you are free to move.

  Thank God!

• Double desktop screen "stacked" on first office on a single monitor after using two monitors Netflix to the TV

  Double "stacked" on first desktop on one monitor - desktop screen came just after using two monitors (Netflix on TV extended

  My computer kept crashing after I had hung a dual monitor.  The second monitor was my television, playing a Netflix movie while I also used my computer to work on.  After splitting the two, I kept crashing for a few days.  I tried to delete the second monitor in the display settings, but does not know how to do this, if it's possible, but I think it's the problem and the cause of the double view of the desktop on my computer now.

  Does anyone know how to confirm what the problem is for some, and/or instructions how to solve this problem if you already know what can cause this problem.  No assistance at all would be greatly appreciated.  I tried to understand this two days...

  Note, in the heat of the Las Vegas area, I thought this may be due to overheating, but I actually he cooled in the refrigerator for a short time and restarted, but still have the problem.  Thank you.

  You have a Nvidia 8600 M GS graphics chip located on the motherboard, the drivers for it are provided by your manufacturer, HP, PC-specific to your model and NOT of the site MSUpdate or Nvidia.

  http://www.nvidia.com/object/notebook-Win7-WinVista-258.96-WHQL-driver.html see the following"However, please note that your notebook original equipment manufacturer (OEM) provides certified for your mobile drivers specific to their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. The OEM cannot stipulate support technical issues raised by the use of this driver. »

  Since you apperently have a laptop / Notebook, you get all pilots that manufacturers of PC and NOT of MSUpdate site system. Driver version numbers shown on the MSUpdate site cannot be relied on as correct

• Latitude E7450 processor and controller, E - 2, unstable configuration port of the U2715H - two monitors-

  I have two monitors U2715H connected via a CDM-> DP cable each to a docking station E-Port Plus (in fact an Advanced Port Replicator EURO2) in which sits a laptop Latitude E7450 processor and controller. All items are brand new. E7450 processor and controller is equipped with 16 GB of RAM and two graphics cards: Intel HD 5500 Graphics and NVIDIA GeForce 840 M; selection is automatic, which usually means that the 5500 is running. It runs Windows 7 Enterprise SP1 (64-bit). The docking station has apparently DP 1.2 a capacity (for chaining) but DP 1.2 is disabled in both monitors.

  I have correctly configured the system to have Windows desktop space both monitors at 2560 x 1440 resolution, even with screen internal latitude as a third request for an extension to its full resolution (1920 x 1080). The main screen can be set to one of the two (or three) and I can successfully move the sequence of monitors around (left, middle, right).

  There is therefore no doubt about the ability of the system to support the planned configuration. However, when I dock the Latitude (most with the lid closed) and start, most of the time he is unable to restore the configuration of the two external monitors. Some of the symptoms are: one or two monitors go black, indicating the cable connected but no signal from the docking station. If there is a picture on one of the monitors at startup, it may or may not contain the login screen. (I can still log in because I know which keystrokes to send.) If the login screen is visible, it is usually in low resolution. If I have several active screens, but one is black, I can move the mouse pointer (or an entire window) on the screen black (in the middle or on the side), but it is not visible here.

  Both monitors come right out of the box and the only change I made is to move from the DP to the mDP as input channel. I reinstalled the cables and exchanged the cables between the two DPs on the docking station. I turned the market monitors. I ran the self-test the requirements on both monitors. The connection of the laptop on the docking station is a little wobbly, but I use the spacer provided for the E7450 processor and controller and making sure the connection is correct and stable. I've updated all the drivers and BIOS of processors E7450 and controller. I recently saw a reference to a BIOS for the docking station; I didn't know it existed, but I'm not.

  The installation instructions provided with the monitors were a note on consulting the CD provided for the use of the screen to maximum resolution. E7450 processor and controller is not an optical drive, but I read all of the documentation for the monitor to Support technical without finding what whatsoever to shed light on the situation (in addition to ensure that the graphics card and drivers are up to the task).

  Once I connected, I can manage to make it all in order by randomly (?) lower the resolution of the screen, change the position of the main screen (left-center-right), deselection reselection CDM as entry way and forcing other changes. Once the two or all three screens in operation, I can put them all to maximum resolution and beginning of work. However, it is rather annoying and I would like to have a stable configuration.

  The configuration seems to survive power cycling of the laptop / station but not if I also disconnect the laptop. I should mention that when I detach the E7450 processor and controller, I can use it in other configurations, with or without other external monitors through other ports, before turning it off and later re - anchor as described. However, for the first month I had two old non-moniteurs Dell of any resolution (on DVI and VGA ports) connected to the docking station and the configuration is stable, and for years I used for my older Latitude with a docking station that is older, remembering his device between different hardware configurations.

  Please, someone - and Dell support staff in particular?

  (Editing/updating after transfer of the Forum/devices/Forum/computer laptop and video monitors)

  A brief update of the Denmark...

  We have experienced the issue for several months since the purchase of laptops E7450 processor and controller and docks of Port E II.
  (HDMI screens / black screens with flashing DisplayPort).

  But the new Dock firmware A07 21 v3.10.1. April seems to have solved all our problems.

  Here is the link VMM3320 STD HUB Firmware for E5250/E5450/E5550/E7250/processors E7450 and controller:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=FV9KP&FILEID=3535351776&osCode=WT64A&ProductCode=latitude-E7450-Ultrabook&LanguageCode=en&CategoryID=VI

  Best regards
  Martin

• Two monitors - keep extended mode when the lid of the laptop

  original title: two monitors, in "extended" mode - computer cover laptop shutdown problem

  I want to be able to close the lid of my laptop, and do NOT have any video single monitor mode.
  I want to work as if I was turning in a configuration of monitor monitors two off. Nothing moves, nothing recalibrates, and she's not back on a laptop with a single connected monitor.

  Any ideas?

  What is it in a Dock or simply extended with the video output? If it's just expert panel, you can change the behavior of the 'status quo' power management when you close the lid.

  If it comes in a Dock, it is as expected since it will divert the attention of any screen is available when the lid is closed.

• Dual monitor problems

  I have been using two monitors (1 monitor my primary monitor, 2 monitor showing an extension of monitor 1) for several years now. All of a sudden, monitor 2 links is no longer. I swapped the connections from the cables to the back of my Tower. When I started my computer, startup began the 2 monitor, but as soon as Windows is fully booted, 1 monitor again became the primary monitor and 2 the screen went black. I guess this isn't a hardware problem.

  After some tinkering on the video card Control Panel, I could get 2 monitor to display, but it is no longer made reference the name of the 2 monitor (Asus) as a monitor. It refers to the second screen as "Digital Display" and considers it a generic Non - PnP monitor. I don't understand how it happened, why it happened or how to get my second screen displays correctly again. Currently, monitor 2 a haywire resolution, and I can't improve it (my own, its because he does not recognize the Asus monitor properly and does not know the capabilities of resolution of it).

  I hope someone can understand my problem and is able to help, because I simply can't understand it.

  Hello

  Sorry for the delay in response.

  Thanks for posting your query to the Microsoft community. If you are always faced with the question, I suggest you to follow the steps and check if it helps.
  First update all the drivers on the manufacturer's Web site. I also suggest you to re - configure multiple monitor configuration and check if it helps.
  Guided Help: Setup dual monitor is easy in Windows 7!

  Additional information:
  Move windows between multiple monitors

  Hope that the information provided has been helpful and let us know if you need assistance in the future. We will be happy to help you.

• screensavers to halfway across two monitors

  I have a Dell computer, two monitors running on Windows 7. The screen saver displays halfway on both screens and I can't make the image display on one or the other.  I tried display settings and they are not helping.  Does anyone else have this problem?

  Hello

  What is the current multiple monitor display settings?

  Follow these methods mentioned below and check.
  Method 1: I suggest you to check the display resolution value for both monitors. Make sure that the resolution of the screen is the same on each display.
   
  For more information, see: get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  Method 2: Duplicate the display settings and check if you can view the screen saver correctl. there.

  To change your display settings to duplicate.
  a. open the screen resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.
  b. click on the drop down next to several screens, click duplicate these screensand then click OK.
  The option appears only when Windows detects multiple displays, more than one monitor connected to your PC.

  
  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

• How to set up two monitors on Lenovo T420 with docking station.

  I have a T420 on a docking station (cradle ThinkPad series 3, #4333710U)- and two monitors (each aprox 24 ").  I tried several variations using the NVIDIA display as well as the native Windows Display Manager (7) and am unable to render images on the two external displays.  Can someone please help?

  Hi John,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to determine the root cause of the problem.

  1. Did you do last changes made on your computer before this problem?

  2. Have you tried to monitor primary as secondary and vice versa?

  3. All device drivers are updated?

  After reading your post, I understand that you want to use two monitors with extended view, then you can try the steps in the following Microsoft article and see if it helps.

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  If the problem persists, then pass to the below mentioned method and see if it helps.

  Method 1

  If you haven't tried Exchange monitors so I suggest you to try and see if the problem still occurs.

  To change the settings of two monitors you can consult the links below:

  Guided Help: Setup dual monitor is easy in Windows 7!

  http://support.Microsoft.com/kb/976064/en-us

  Change settings display on multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  Note: This link is also applicable for Windows 7 .

  Method 2

  If the problem persists I suggest you to update the display drivers. As the display drivers for two monitors are not the same, so try to update and check the status.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also try to update the drivers from the manufacturer's website.

  NVIDIA DRIVERS

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Excel on two monitors, the window is uneven

  I use Excel like this for years and never had a problem. Received a new computer with Windows 7 and Office 2010. Now, when I minimize Excel and stretch it across my two monitors, the window of excel is more horiztonally even on both monitors. In the secondary monitor, the bottom edge is higher than the lower edge of the primary monitor of 2.5 inch.

  Help, please.

  Hello

  For several years I have seen the problem that shows your image.

  You can see in the picture the monitor of the number 2 is offset, vertically with respect to the number of monitor 1.

  You can move the monitor autour images using the mouse in the same way as you would move a shortcut on the desktop.

  Place the mouse cursor on Monitor 2, hold down the left mouse button and drag the image upwards slightly until it is aligned with the number of the monitor 1.

  Click apply/OK.

  Test and let us know the results.

  Concerning

• Splitting of the "parts" of Photoshop Elements on two monitors

  I have two monitors and would like to implement the following configuration: a monitor for full screen image editing and one screen for the menus, buttons, and the GUI tools. I read a suggestion to go watch one at a time each individual 'Panel' more in high school, but is there a way to move the image being edited on the secondary screen instead? Move each panel every time too long seems to be the way to solve this problem.

  I use Photoshop Elements 10 on Windows 7.

  Try to move the editing window, but re - set up your preferences.

  Go to preferences to change General

  Then choose allow Documents floating in the editing Mode completes.