MS NetMeeting

Similar Questions

• PowerPoint 2010 slide show does not appear in NetMeeting

  We migrated to Office 2010 and now when we try to make presentations PowerPoint (slide show) via Netmeeting w / remote employees, they can't see the presentation - it shows just like a black screen.  We cannot use the broadcast feature because a lot of our presenations contain private information / guarantee and we are unable to publish to a public site.  We do not have an internal broadcast site, people can use.  Is it possible to display a slide show presentation in Netmeeting?

  FYI - when I loaded the 2010 presentation via an old laptop with Powerpoint 2003, he did display via Netmeeting, but it was VERY slow - and we won't have these machines 2003 much more long.

  I appreciate all help. -Anne H.

  Open PowerPoint, select the Files tab and click Options;

  In the window that was open on the left, select the advanced option and then view the left of the heading, select the disable graphics hardware acceleration.
  Click OK. and from this point, you get full-screen that displays normally NetMeeting only for presentation.

• Can I use NetMeeting to connect two computers in different physical locations using NetMeeting to dial a modem line with another computer

  original title: Microsoft Netmeeting

  Can I use NetMeeting to connect two computers in different physical locations but a local call using NetMeeting to dial a number to the other computer by a traditional dial-up 56K modem via telephone lines, (US Robotics ISA 56 K Win Modem kVoice) dialing the telephone number of the other person & their dial-up Modem too?  NetMeeting there software to do this, or do we need to use other software, downloaded or already in Windows XP?  Can we use NetMeeting on Windows XP Home Edition or XP Professional?  We do NOT want to go through the Internet, as our students do not have at this time of money to afford Internet connectivity.  . You want to use NetMeeting for tutoring purposes.

  Hi Rafael,

  Yes, you can use NetMeeting to connect two computers. Follow the steps in the article.

  How to turn on the feature Windows NetMeeting Remote Desktop Sharing in Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/878451

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_netmeeting.mspx?mfr=true

• Why my NetMeeting works with Windows 7?

  I am now able to use NetMeeting with my version of Windows 7 Professional Enterprise (SP1). It's strange for me because all the messages that I read said it should not. And I have not any virtual machine to use XP or other to do. The only proposal I have is my laptop has been upgraded to Windows XP and some components have remained on my hard drive to enable the feature of netmeeting. It is not in my programs listed. However, when I go to RUN and type 'conf', I am able to open it.

  The only problem is that when you open or close my NetMeeting, screen will flash several times until it is closed or open. As a kind of conflict with the video card. Also, if I put my knees on the eve while my NetMeeting is open, when put on again, it starts flashing sameway (black screen) before you even show anything on the screen. This is when I need to restart it manually.

  Getting back to my question, a colleague asked me how to run NetMeeting in his new laptop. Other than the use of solutions of spare or install Virtual Machine with XP, I have not found another that has same situation: why MY NetMeeting running Windows 7? (I would like to know if there is a way to replicate my settings on the computer (even to copy my installed files)?...) I wonder. Thank you!

  Hi, he,

  1. is the computer connected to a network domain?

  2. you receive an error message or error code?

  You can try to uninstall and reinstall Microsoft NetMeeting and check if that does the trick. See the following article for more information:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  If the computer is connected to a domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How to install Netmeeting in windows 7

  How to use netmeeting in Windows 7

  NetMeeting is not included in Windows 7; It's now called Microsoft SharedView (who thinks these names?).   There is a small download to be installed on every machine that want to join the meeting.  Up to 15 participants are allowed, and this program works on Windows 7, Vista, XP, Windows Server 2003 machines.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=95af94ba-755e-4039-9038-63005ee9d33a&displaylang=en

  https://connect.Microsoft.com/site94?WA=wsignin1.0

  Barbara

• NetMeeting does not not between the cisco vpn clients

  Hello

  I had posted the same query a weeks but did not get any reply.just adding more details and hoping som1 help me.

  Here's the real problem:

  We have a client that users use clients vpn cisco to connect LAN business from the public network and access as expected and also able to run netmeeting from his pc, but when users attempt to run netmeeting between two connected to the public network, vpn clients with same ip pool, it does not work.

  Thank you & best regards

  Madhu.

  Try to delete "nat (outside) 1 192.168.1.0 255.255.255.0" and try again.

  Or try adding something like this...

  outside_nat0 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.0 255.255.255.0

  NAT (outside) 0-list of access outside_nat0

• Y at - it something like Netmeeting in Windows 7?

  Is there a center of ny in windows7 to netmeeting? otherwise all other tools instead of netmeeting in windows 7

  Hello

  Check these options:

  Looking for a Windows meeting space?
  http://Windows.Microsoft.com/en-us/Windows7/looking-for-Windows-meeting-space

  Microsoft Office Live Meeting
  http://Office.Microsoft.com/en-us/live-meeting/

  Forums and Office Live support
  http://Office.Microsoft.com/en-us/marketplace/CE001017195.aspx

  Hosted Web conferences
  http://www.Microsoft.com/online/Office-Live-Meeting.aspx

  Microsoft Office Live Meeting
  http://www.Microsoft.com/business/en-us/products/officelivemeeting/default.aspx

  Demo: Microsoft Office Live Meeting
  http://Office.Microsoft.com/en-us/live-meeting-help/demo-Microsoft-Office-Live-Meeting-HA010240323.aspx

  Office Live Meeting
  http://www.Microsoft.com/online/Office-Live-Meeting/buy.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• NetMeeting connection problem

  VPN3000 dear experts,

  I'm having a problem with Netmeeting connetion from a VPN Client that ends an IPSec tunnel for a VPN3000 concentrator. Peer NetMeeting this VPN Client is a PC behind the hub. I have already read the FAQ on VPN3000, he says that a Netmeeting does not work with a VPN client, but there no reason to detail why Netmeeting does not work with an encryption tunnel. The explanation is very bad that I do not really understand the meaning. If someone can do a better explanation why Netmeeting doesn't work not with an IPSec tunnel would be much appreciated.

  And nobody knows if Netmeeting will benefit from a VPN client?

  Best regards

  Engel

  Engel,

  NetMeeting, according to me, uses H323, including VPN client is not supported. H323 support will there be in version 4.0 of the customer

  Jean Marc

• Update my Tecra 8000 from NT 4.0 to Windows 2000

  When I update me my Tecra 8000 NT 4.0 to Windows 2000, my Setup stopped and I got the message that I had to remove the Configuration Interface for system Toshiba driver. What is going on?

  To enable NetMeeting in Windows XP, you must go to the start menu and select run. Conf and click OK. After the NetMeeting configuration wizard starts, click Next. Enter your personal data and click Next. Select Directory list options, and then click Next. Select the media for your connection and click Next. Set up shortcuts for your convenience options, and then click Next. Click next to configure the volume options and click Next and then click Finish. To start NetMeeting, NetMeeting Startup session (e.g., run conf.exe again to start the application or select the shortcut in the start menu or desktop), click the phone button and enter the IP address of the machine you want to connect with.

• Video-conference

  I use a 750cdt, tecra with a toshiba camcorder (webcam)
  OS is Win 98 SE.
  If I want to use the camara with MSN Messenger, it will not work. With Netmeeting, I see myself.
  Has anyone have the same problem and how did you solve it?
  TNX

  Hello

  Only what I can suggest to you, is to check your cam on each application settings. There is possibility to check the functionality of your cam. I use Webcam (not Toshiba) with both apps and it works well. I had some problems with the sound, but after a few changes in sounds and Audio Devices Properties, everything is OK.

  Maybe your cam settings are not compatible wiouth MSN, google around and maybe you have luck and find a solution

  Good luck!

• Tecra M5: Create Overlay has no message is displayed when playing DVD

  When I try to play a DVD on my Tecra M5 I get the following message 'create overlay failed' and a suggestion that I reduce my resolution or color depth. I got these verses down to the lowest possible and still get the above message. I checked the drivers for the graphics card and a DVD player and both seem to be up to date.

  All of the suggestions.

  Hello

  On many forums, you can see the same question on different models of laptops, but no single solution works for everyone.

  Check please if the extended Office option is enabled. If so disable it.
  1. right click in an empty area of the desktop and select Properties.
  2. in the display properties window, click the settings tab.
  3. on the settings tab, clear the check box of the extend my Windows desktop on this monitor, and then click OK.
  Some users have reported that open Netmeeting causes this problem.

  Also, please check follow page: http://player.interactual.com/help/support/articles/0015.asp

  Good luck!

• HP pavilion a530n: restart hang

  Hello

  I have HP Pavilion a530n

  I've updated the bios

  motherboard ASUS K8N8X-(Diablo-UL6E)

  3.11 BIOS revision 31/08/04

  CORE 08.00.09

  The Athlon 64 processor brand

  Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600

  Connection to the local network

  It's a great machine, I feel some as a hardware malfunction and I came to HP looking to reduce at the source of the problem and get the right solution/replacement.

  In a first time considered to be a graphics card problem, I believe that it is the processor. Spikes in CPU usage (lag) for video media / scroll / animations/Games etc no matter what ranging from 80 to 120 MB and audio sync studder problems occurs.

  Graphics drivers from Nvidia has mitigated the problem by increasing the performance even more. But there has got to be hardware at fault. Then

  I decided to test the performance of the processor (on the clock) and I arrived for an update of the bios that would allow me to unlock the processor speed and diagnose the problem.

  "as had recommended", I missed the warnings and ran the installer. I did a backup.

  I ran restarting set up, hanged. Forced shutdown. initialized to a checksum error in the diagnostic screen (POST)

  connected to windows messenger windows could not connect to retry or cancel (two at the same time error messages), connection to the internet explore has been limited and some pages may not display, refreshing was necessary.

  It mainly that my office now has not run the warm boots. (it stays on, "hangs" before entering the MBR or by MAIL)

  Cold only work boots.

  It's the factory version

  Provider of system BIOS: American megatrends Inc. 2.11 31/08/2004

  SMBIOS Version 2.3

  carried out the restoration of the system - created minutes before.

  I reinstalled the operating system. I could not install the drivers or connect to windows messenger. I found that most network services have been disabled. I have reactivated them and was able to install the drivers.

  I went into the settings BIOS and "permits" the diagnostic screen. Connected to windows and connected, restarted messenger and it worked! for about 3-4 warm boots.

  Problem was solved temporarily; no major changes, there is no software currently only SP3 and. Net4 I was able to get windows update to download Internet Explorer 8. rebooted and hung... I don't remember exactly what happened just before.

  I cleared the cmos jumpers

  I also found a few bios utilities and a legacy of ASUS K8N motherboard-specific versions. (FAQ describes most of my problems)

  but I'm still not able to retrieve the version 2.11 of the factory and/or flash their public services.

  I've disconnected all devices but still hangs on reboot.

  loaded by default F5 and saved out F10. services.msc services are activated and started

  I searched on the HP Pavilion a500 Fund data base for a bios which corresponded to the K8N8X - LA motherboard, found another which fixed a problem of logo outside of send/receive error reports.

  Nothing without major change

  I downloaded the map network, the hp chipset drivers.

  Control Panel > Power Options > UPS >

  theres a [!]

  "The UPS service is currently stopped."

  If this is the reason why my computer is unable to restart

  run the command

  cmd /k sc config UPS start = disabled

  run a command that says ' [SC] ChangeServiceConfig SUCCESS. "

  Still, he was arrested after reinstalling the operating system. This isn't a solution

  I found this bios chip.

  What is delivered factory bios version?

  Manufacturer

  ModelChipset

  BIOS ID

  Full BIOS ID

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0302-000001-00101111-110703-HAMMER-N8XLA300

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0311-000001-00101111-083104-HAMMER-N8XLA308

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0310-000001-00101111-060104-HAMMER-N8XLA308

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  63-0311-000001-00101111-083104-HAMMER-N8XLA308 AM61CA02

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0307-000001-00101111-031304-HAMMER-N8XLA309

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0303-000001-00101111-120303-HAMMER-N8XLA302

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0310-000001-00101111-060104-HAMMER-N8XLA308

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  63-0302-000001-00101111-110703-HAMMER-N8XLA300 AM61CA02

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  63-0307-000001-00101111-031304-HAMMER-N8XLA309 AM61CA02

  ASUS to HP/Compaq K8N8X - LA

  nVidia nForce3 (CK8 + MCP2)

  AM61CA02

  63-0303-000001-00101111-120303-HAMMER-N8XLA302

  Solved the problem of restart.

  You can email me at [email protected]if you need assistance.

  Articles related to the causes of the problems of reboot:

  Microsoft technical support

  «This article describes how to resolve an issue where your computer stops responding (hangs) when you restart to complete the installation of Microsoft Windows XP Service Pack 2 or Windows XP Tablet PC edition 2005.» This problem occurs on a limited number of systems that use a version of basic input/output system (BIOS) that does not support production for Intel Pentium 4 and Intel Celeron D processors based on Prescott C-0 walk. »

  SECURITY

  "Mebromi is a Trojan horse aimed at computers with AwardBIOS, Microsoft Windowsand antivirus software from two Chinese companies: Rising Antivirus and Jiangmin KV Antivirus." [26] [27] [28] Mebromi installs a rootkit that infects the master boot record. »

  Once you reinstall the operating system, it should start normally. When you install SP1, SP2 and SP3 configurations start to become disabled as you progress through the facilities. Mainly the SP2 that is embedded with .NET framework.

  as a result.  Disabled at kernel/BIOS level networks > where activation of services is only superficial and plastic. The machine will be fractal reboot:

  PEOPLE WITH DISABILITIES

  The alerteur...
  Album...
  The Human Interface device access...
  Messenger...
  Net.Tcp Port Sharing Service...
  Network DDE...
  Network DDE DSDM...
  Remote Access Auto Connection Manager...
  Routing and remote access...

  Manual

  Application layer...
  Man asks...
  ASP.NET...
  COM EVENT SYSTEM +...
  COM + SYSTEM APP...
  Distributed transaction...
  Extensible authenticator...
  Fast user switching...
  Telec...
  Key health and...
  HTTP SSL...
  IMAPI CD-BURNING...
  Indexing Service...
  Logical Disk Manager...
  Logical disk administrative management...
  Software MS shadow...
  Network connection...
  NetMeeting Remote Desktop...
  network access...
  network connections...
  network location...
  provision of a network...
  NT LM Security...
  Office source engine engine...
  Performance logs...
  Multimedia notebook...
  QoS RSV...
  Remote access...
  Remote Desktop...
  Remote procedure...
  Removable Stora...
  SOPHIE...
  Smart card...
  SSDP Discovery...
  Symmatec password...
  Telephony...
  Terminal Server sErvice...
  Uninterrupitble power supply...
  Universal plug-and - lpay...
  The shadow copy of volume...
  Windows image acquisition...
  Windows install...
  Font Windows presentation Foundation...
  Wireless Autoconfig...
  WMI Performance...

  Auto...

  Net.Tcp port sharing...
  automatic updates...
  Intelligent background...
  Computer browsers...
  Cryptographic service...
  DCOM server...
  DHCP client...
  The error report...
  Event log...
  Help and support...
  IPSEC Services...
  Microsoft .net framework...
  NOrton Antivirus Auto protect...
  NVIDIA Display driver...
  Plug-and-PLay...
  Pring spooler...
  Protected storage...
  Remote procedure call...
  Secondary logon...
  Security Accounts Manager...
  Security Center...
  Server...
  Shell hardware Detection...
  Symmatec event handler...
  Symantec Settings manager...
  System event nOtification...
  The system restore sErvice...
  Task Schedulred...
  TCP/IP...
  Themes...
  WebClient...
  Windows Audio...
  Windows Firewall...
  Windows Management Instrumentation...
  Windows time...
  Wireless Zero Configuration...
  Workstation...

  I say this with absolute certanty

  I never had any problems with the installation of SP3 and .NET 4 or all the problems on my computer of this magnitude.

• Imaging Source DFG/SV1 acquisition card is not correctly recognized in LabVIEW 2009

  I have an Imaging Source DFG/SV1 frame grabber/capture card (I think that this example uses a Bt878 chip) that I am using with LabVIEW 2009 (Fall edition 2009 academic Site license), including elements of acquisition of vision (NEITHER Vision, NOR-IMAQ (4.3) OR-IMAQdx (3.4), etc.). I have all the latest sources of imagery support drivers and software for the Board of Directors (http://www.theimagingsource.com/en_US/products/grabbers/dfgsv1/ drivers: v6.0.3.0, IC Software v2.1 and IC Imaging Control v3.1) with drivers being compatible DirectShow. The DFG/SV1 is detected in MAX under devices NOR-MAQdx / DFG/SV1 / cam0 and I can grab and preview images, however to 320 x 240 resolution, I have a higher resolution camera and know that the jury is capable of greater resolution using IC software manufacturing and also via TWAIN with ImageJ software drivers. Interesteingly, if I try to acquire an image of the card purchase using the Vision Assistant, the DFG/SV1 card is not recognized as a card acquisition, but listed under IEEE 1394 or GigE peripheral, revealing with it being direct device that I can't understand. Despite this I can acquire images, but I am limited to 320 x 240 format and change the type of image (RGB, UYVY etc) causes an error. Once again, oddly enough, I can use "enter and select mode example VI" which should only be compatible with IEEE 1394 cameras.

  I'm not sure why LabVIEW is not seen this card properly, I contacted Imaging source who were also intrigued by the fact.

  Any information on how this could be resolved would be much appreciated.

  Thanks in advance.

  Hi OCastell,

  With this Council Imaging Source, the only interface supported with drivers of NI Vision Acquisition is through using IMAQdx DirectShow interface. It is possible that their DirectShow driver does not properly support all of the capabilities of their Council. Given that ICR software and TWAIN support can be routed to a different implementation of one of the DirectShow support, you can see the different features available. Unfortunately, you probably go through Imaging Source to determine why their DirectShow driver does not support the full resolution. You can confirm that it isn't IMAQdx this limiting trying other software such as Windows NetMeeting or AMCAP DirectShow and see what capture resolutions are listed.

  Because the DirectShow interface is managed by IMAQdx driver, it will not be detected as a framegrabber IMAQ using the IMAQ driver. This is expected since it fits in the same category as firewire and GigE Vision cameras and is supported with the IMAQdx driver instead.

  The "Grab and select the Mode" example VI isn't really specific FireWire, although he was certainly intended to highlight the various video modes that generally expose FireWire cameras. Since the DirectShow devices are similar and have several selectable video modes, it's why he's probably working. In any case, IMAQdx abstracts usually differences between all supported camera types and in general a single VI can run on all cameras IMAQdx-taking in charge unless you rely on buses or the camera-specific features.

  Regarding Vision Assistant marking the camera as 'IEEE 1394 or GigE', I think it's just an aesthetic issue (which may already be fixed in new versions). When IMAQdx was out, these are the supported types of cameras and so Vision Assistant was trying to say clearly what driver was used for the type of device. Now that IMAQdx supports a multitude of new interfaces (including DirectShow and some IP cameras) that the label is inaccurate.

  Finally, looking at the specs for this capture card, it looks like a standard reference BT878/848 model and then you could try potentially replace your Imaging Source driver with one here:

  http://BTWinCap.sourceforge.NET/

  I used this with a with IMAQdx BT878 capture card and can get it to capture an image full resolution (but of course, your results may vary...). It goes without saying that this solution using DirectShow is much more limited than using an industrial camera on 1394/firewire or a framegrabber IMAQ.

  Hope this helps,

  Eric

• Was Windows 2000 Pro?

  Hey. I heard people talking about Windows 2000 Pro with respect.

  "This is a fantastic product!

  Well. is this true?

  Hello

  Windows 2000 is a line of operating systems produced by Microsoft for use on personal, desktop computers business, laptops, and servers.

  Published on February 17, 2000, it is the successor to Windows NT 4.0 and is the final release of Microsoft Windows to display the "Windows NT" designation.

  He was replaced by Windows XP for systems of office in October 2001 and Windows Server 2003 for servers in April 2003. Windows Me was released seven months after Windows 2000 and a year before Windows XP, but Windows Me was not intended to be, nor served it as the successor to Windows 2000. Windows Me was designed for domestic use, while Windows 2000 is designed for businesses.

  He had a lot of new features such as the update of Desktop Windows, Internet Explorer 5, (Internet Explorer 6, which entered in 2001 is also available for Windows 2000) Outlook Express, NetMeeting, FAT32 support, Windows Driver Model, connection sharing Internet, Windows Media Player, support for WebDAV etc.

• Unauthorized remote access

  Help!  Someone has gained unauthorized remote on my computer. What can I do to fix this?  Merlin

  Try the procedure here to remove NetMeeting:

  <>http://xphelpandsupport.MVPs.org/how_do_i_remove_netmeeting.htm >

  Otherwise, go to-> Windows Firewall Control Panel, click the "Exceptions" and uncheck the box in front of "Remote Desktop".  If there is a line of NetMeeting, you can remove the control from the front of this one, too.

  Best I can do...

  HTH,
  -JW