MS SQL and store data on changes

Similar Questions

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• shut computer down, restarted my time and the date has changed

  shut computer down, restarted my time and the date has changed.  My date always gose for December 31, 4001.  Goin whats?

  Hello
  Date and time incorrect after restarting is usually the result of a dead of the CMOS battery. You may need to contact the manufacturer of the computer for help on this issue.

• How do I to the previous screen in android using phonegap and store data in ios

  Hello

  I use phone of gap technology, in android how previous screen.actually go, I used navigator.app.backHistory () orwindow.history.back () ' its fine for blackberry or ios .but does not not in android... Please suggest...

  Question 2) how to store data in ios?
  I used (window.localStorage, it works very well with android and blackberry not ios.why)
  Thank you

  Hello

  I think you'll have more chance of Phonegap Google Group for your Android questions as everyone is here to help specific BlackBerry.

  https://groups.Google.com/Forum/?fromgroups#! Forum/phonegap

• Location where Windows (xp) stores data has changed and needs to be repaired. How does this repair?

  I ran "fixitcenter.slupport.microsoft.com" and this is what they were saying was wrong. "  They automatically correct some defects, but has not fixed this problem - just tell me what was wrong and said it "must" be repaired.

  1 remove the data store and allow it to rebuild. First stop the Automatic Update Service Click Start. Choose run. In the run box, type services.msc. Click OK. Right-click the Automatic Updates Service. Click stop. Please rename the folder c:\Windows\SoftwareDistribution after stopping the Service Open the Windows Explorer Navigate to the Windows folder Click on the + next to the Windows folder Navigate to the folder C:\Windows\SoftwareDistribution Right-click on the folder C:\Windows\SoftwareDistribution Select Rename in the Menu Rename the SoftwareDistribution.old folder and click enter Now, restart the Automatic Update Service Click Start. Choose run. In the run box, type services.msc. Click OK. Right-click the Automatic Updates Service. Click Start. Starting the service will take a moment. Start Windows Update again UTC/GMT is 03:16 on Saturday, December 3, 2011

• The location where the windows update stores data has changed and needs to be repaired

  I couldn't down the updates for the month. I ran attach it to microsoft, but he told me that the situation has changed and it needs to be repaired. Someone knows how to do this?

  Hello

  Did you change your computer?

  Have what fixit you tried?

  Method 1:

  I suggest you to follow the links and check out them.

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• the location where the Windows Update stores data has changed and needs to be repaired. How to repair?

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  This statement appears when the windows update don't load new updates.  In addition, I can't turn on Windows automatic updates. Windows XP SP3

  Try...

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

• location where windows update stores data has changed and needs to be repaired

  I ran correction for subjects with updated, fixed it some, but should always fix the default windows update sites. I couldn't find a link or instructions on how to perform this task, please help thanks

  Hello

  Who did you run to Fixit?

  Run the Fixit and see if it helps, if you have not tried earlier.

  How to reset the Windows Update components?

  Hope this information helps.

• I've updated my Web page - updates on my server remote "using dreamweaver" and the date has changed, but when I go online to check, nothing has changed.

  everything is connected, dates changed in the remote server, I deleted my story so that his is not only in his memory but actually looking for the page.

  someone at - it ideas?

  Thank you I have worked with host still today and it is a parameter their end they think.

• How to set up a chart and store data points in a table to allow me to do the analysis with him

  Hello

  I am relatively inexperienced, with the help of labview and I try to do the following with the help of an oscilloscope Tektronix TDS 2001 C but have no idea how start.

  (1) load a previously saved regarding the volts/div and setting s/div on oscilloscope

  (2) pass everything that appears on the o-scope on my computer screen

  (3) save the data table so that I can do a scan with it

  I watched some of the diagrams of block of example provided with the driver I downloaded for this particular unit but am still very confused.  Any help would be greatly appreciated

  Hello Chron0,

  I know I guess a little here, but have you downloaded a specific device of ni.com/idnet driver?  This is a good place to find the built-in drivers for third-party devices, and there is one for this particular model.  That being said, when I looked at the examples in the downloaded zip file, I saw a couple of predefined options that look like they should satisfy question #2 of your project based on the method to use to acquire a waveform (permanently, several waveforms, etc.).  Similarly, in the Public folder is a configuration of channel VI which I think should satisfy what you are wanting to do to the #1 question.

  Depending on what you are willing to do data analysis, with regard to the software used, functions, etc., there are several reporting tools in LabVIEW which will allow you to save the table and manipulate later. A good place to begin with, it will be to search for "File i/o" in the search bar helps LabVIEW and select the option under the heading "Palette."  There are several options here that I think might be useful, including writing in the file.vi worksheet.

  It will be also good to be familiar with the Finder example OR in LabVIEW.  There are examples of spreadsheets / saving data, as well as VISA, which you can do some reading on, because the interface VISA, it's how you communicate with this device (Fortunately, the driver already download it!)

  Good luck to go ahead and keep us informed here on your project!

  -Dave C

  Technical sales engineer

  National Instruments

• need help with hex and handling data extraction

  Hello

  I have able to transmit hexagonal commands on the serial port of my camera and receive responses in hex him successfully. I was able to confirm this by changing the display format to the spell for the control and the indicator. Now, I want to store the portion of the hexagonal received data and use it in my future orders. Example of received data as below:

  0001 1100 0010 E002 6 93 4D7E 2C4D AA66 F00D

  The red blocks will be incorporated in the next command so that when I sent this command it will look like this:

  F00D 0014 2000 0003 0000 0020 77AF E002 6 93 4D7E 2C4D

  In short, send the command and get response, extract and store data in red blocks, then send different control that contains the data that is stored. Everything is in hexadecimal format. Question is how can I extract/store the bytes wanted to and then rebuild a hex command containing these bytes? Can I convert it to normal string, byte array, or hexagonal table? If we use the latest methods of 2 conversion, I need to ensure that the zeros are not lost.

  I enclose my VI. Please take a look and help to provide a solution.

  Thanks in advance.

  Here, s what I had in mind (LabVIEW 2010):

  

• Insert and add data to the table to a batch file

  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE Production 11.1.0.7.0
  AMT for 32-bit Windows: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production
  
  
  My patch to input file looks like this:
  
  A0397990002000001
  A0459380377000075
  A1291115796000002
  C0483110026000080
  D0491114923000004
  A0348400660000000
  G0209111373-
  
  Separate columns look like this:
  
  A0397 990002 000001
  
  account amount of IDN
  
  
  I'm new to PL/SQL and having a problem changing or adding a record in a table. Don't know how to check if a record exists in the table change if not
  Insert the record.
  
  If the quantity is 000000 or - the record should be deleted. I have code in place to do this however, don't know how to handle change or add the part.
  
  Here is the code I have so far and thanks for looking:
  
  Set serveroutput on
  create or replace directory user_dir as 'c:\dataformats\incoming\ ';
  
  
  DECLARE
  
  
  v_filename VARCHAR2 (100); -The name of the data file
  v_file_exists boolean;
  number of v_file_length;
  number of v_block_size;
  f utl_file.file_type;
  s varchar2 (200);
  lineString varchar (200);
  
  -not used c_ *.
  c_account ID_REQ_STG.account%TYPE;
  c_IDN ID_REQ_STG. IDN % TYPE;
  c_quantity ID_REQ_STG.quantity%TYPE;
  
  ID_REQ_TUPLE ID_REQ_STG % ROWTYPE;
  
  v_account varchar (5);
  v_IDN varchar (6);
  V_quantity varchar (6);
  
  BEGIN
  v_filename: = ' PTCLICK. MANUAL.12SERIES.TXT';
  
  
  DBMS_OUTPUT. Put_line (v_filename); -the name of the file
  
  
  UTL_FILE.fgetattr ("USER_DIR", v_filename, v_file_exists, v_file_length, v_block_size);
  
  IF v_file_exists THEN
  
  dbms_output.put_line ("'File Exists");
  
  f: = utl_file.fopen ("USER_DIR", v_filename, "R");
  
  IF utl_file.is_open (f) THEN
  
  LOOP
  BEGIN
  UTL_FILE.get_line (f, s);
  lineString: = s;
  
  dbms_output.put_line (lineString);
  
  v_account: = substr (lineString, 1, 5);
  v_IDN: = substr (lineString, 6, 6);
  V_quantity: = substr (lineString, 12.6);
  
  
  dbms_output.put_line (v_account);
  dbms_output.put_line (v_IDN);
  dbms_output.put_line (V_quantity);
  
  -REMOVE
  
  IF v_quantity = '000000' GOLD v_quantity = '-'
  THEN
  REMOVE FROM ID_REQ_STG
  WHERE account = v_account and
  IDN = v_IDN;
  commit;
  dbms_output.put_line ('Deleted the folder' | v_account |) «and» | v_IDN);
  END IF;
  
  
  -CHANGE
  
  
  
  -ADD
  
  
  
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  dbms_output.put_line ("' no data found");
  EXIT;
  END;
  
  END LOOP;
  
  END IF; -is open
  
  UTL_FILE.fclose (f);
  
  
  ON THE OTHER
  
  dbms_output.put_line ('file does not exist');
  
  END IF; -file exists
  
  EXCEPTION
  
  WHEN UTL_FILE. THEN ACCESS_DENIED
  DBMS_OUTPUT. Put_line ("' no access!");
  WHEN UTL_FILE. INVALID_PATH THEN
  DBMS_OUTPUT. PUT_LINE ('PATH DOES NOT EXIST');
  WHILE others THEN
  DBMS_OUTPUT. PUT_LINE ("SQLERRM: ' |") SQLERRM);
  
  
  
  END;
  /

  Hello

  Looks like a good candidate for a MERGER with an external table.

  The external table:

  create table ext_table (
   account varchar2(5),
   idn number(6),
   quantity varchar2(6)
  )
  organization external (
    type oracle_loader
    default directory user_dir
    access parameters (
      records delimited by newline
      fields (
        account position(1:5) char(5),
        idn position(6:11) char(6),
        quantity position(12:17) char(6)
      )
    )
    location ('test.txt')
  )
  reject limit unlimited;
  

  Then a simple MERGER should perform all your needs:

  MERGE INTO id_req_stg t
  USING (
   SELECT account,
          idn,
          decode(quantity, '-', 0, to_number(quantity)) as quantity
   FROM ext_table
  ) v
  ON ( t.account = v.account AND t.idn = v.idn )
  WHEN MATCHED THEN
    UPDATE SET t.quantity = v.quantity
    DELETE WHERE t.quantity = 0
  WHEN NOT MATCHED THEN
    INSERT (account, idn, quantity)
    VALUES (v.account, v.idn, v.quantity);
  

  Documentation related to the MERGER: http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9016.htm#SQLRF01606
  and on the outdoor tables: http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/tables013.htm#ADMIN12896

  Published by: odie_63 on June 10, 2010 14:26 (added docs)

• Store data on a USB device

  Hello

  I dreamed of my server at home, now I bought a server and have my first problem.

  My hardware:

  HP ML110 G7

  I hoped that it would be possible to install esxi 5 on an sd card (which works fine) and store data for a virtual machine on the sd card or a USB stick (which is not possible)

  Is it possible to use it as I mentioned?

  Stefan

  Welcome to the community,

  Unfortunately not. VMware does not support the VMFS partitions on USB/SD devices.

  André

• automatic change of files to store data

  Hello

  I have a stand-alone system that works with 7 serial ports.

  I need to store a huge amount of data (115,200 Kbaud / port) because the system must continue to work for a week.

  In two days, I have a file size of over 500Mbytes. The problem is that I'm storing the data in a .txt file and then, when I want to the process, with the data, the computer laptop can´t open a file so the size.

  I can´t find a way in which the vi can change in real-time (himself) the file to store the data.
  Maybe the way is to create 3-4 files before the while loop (in which I read the data), and then change the file in which to store the data, but I can´t find a way to do it. With the get_file_size.vi that I know when I need to change the file, but how I have to do without leaving the whole loop? In my view, necessary to ensure that the visa_read.vi works...

  maybe better or another format or way to store data?

  It does not matter of data loss while changing the file.

  Someone at - it an idea?

  Thank you

  A quick...

• Lock on a table and SQL * Net more data from client

  Hello

  I have a problem loading data through Php in Oracle: web page of Php open an xml file, create a .csv, then begins to Oracle using an external table to process the data.

  The problem is that, the second time that PHP is trying to run the following query:

  INSERT INTO table1 T (Field1, Field2, field3, field4, sphere5, case field6) VALUES ('Aaa1E63819707', SYSDATE, 'KO', 'error', 'L', 'file_name.xml') POLL INTO Field1: id

  on the Oracle sessions, I have an exclusive lock on table1 and wait for SQL * Net more data from client.

  Where is the problem?

  Thank you

  Igor

  Finally I found the problem: a DBA changed the cursor sharing EXACT force! I restored the CORRECT setting and now everything is fine.

  Thank you

  Bye,.

  Igor