MSP Mirage

Similar Questions

• Analog control over the timing of myRIO MSP?

  Hello

  I'm new to myRIO and just got my.

  How do you set the rate for similar samples of the port of an MSP myRIO?

  For example, I would like an analog stream output 200ksps.

  Place the block of OUTPUT ANALOG in a timed loop and runs only gives an output of 6.3 kHz frequency. (measured at the ao1 using a scope)

  See the attached file.

  I incorrectly use the timed loop? (.. .havent used before)

  Or myRIO does needs some extra configuration?

  Thanks for any help to what appears to be a very simple problem.

  See you soon.

  Hey, Carloman.

  In this case the speed is limited by the software (OS, background process and especially the code LabVIEW) running on the ARM processor on the myRIO.  200 Ksps specification is for the hardware.  If you need to write this young, you can use LabVIEW FPGA to write data.

  One of the reasons why it is difficult to reach the 200 Ksps output rate of the side RT is because each iteration of the loop produces only 1 sample (the FPGA is configured for the only point of exit... a sample at a time).  The perfect way to generate samples on the side RT and to write data to 200 Ksps is to build several samples each loop and use a FPGA personality that supports analog output buffer in memory.  This allows to generate N samples each iteration of the loop and then send samples to a FPGA (FIFO) buffer that implements buffer and copy the data.  I believe that it is coming in a future update.

  For now, you can implement this architecture by creating a custom FPGA personality or you could do everything in LV FPGA.

  Let us know if that makes sense.

  Thank you!

  -Sam K

  Hacker of LabVIEW

  Join us / follow theGroup of pirates of LabVIEW on google +

• associate the Windows Installer Windows XP .msp files

  Hello

  I need to execute a file .msp (patch for a software) that would be associated with Windows Installer under Win7, but don't natively is not with Windows XP.  If I right click on the file and select 'Open with', the Windows Installer does not appear in the list.  If I browse and try to locate the Windows installation program, I don't know (I did several searches but not prevail).

  Hello

  If I remember what I did was to remove the association for PaintShop Pro .msp files should open up PaintShop and then click on file > Preferences > file associations, and then DESELECT .msp format.

  To make this work on Win7, you may need to start PaintShop with administrator rights (rather than simply clicking on the shortcut, right-click and select "Run as Administrator" for PaintShop now has the right to change the registry.

  If you succeed, then the .msp file will be more associated with PaintShop Pro and should show as a no associated file.  Then, pair it with Windows Installer patch as I mentioned.  When you have finished installing the patch, you may want to reassociate for PaintShop .msp files, if you have graphics files with this extension.

  I hope this works.

• Cannot open the. MSP.crdownload file in Windows XP

  I am trying to install an update to Adobe Acrobat 9.5.1 and it downloads the file has a range of. MSP.crdownload. I'm running Windows XP and it does not open.

  
  
  Thanks for any help.
  
  
  NP

  Hello

  crdownload seems to be a Chrome extension.

  Reinstall Adobe Acrobat and check if the problem persists.

  http://support.Microsoft.com/kb/307895
  http://support.Microsoft.com/kb/305548

  If the problem persists, I suggest you post in the forums of Adobe support for the best assistance.

  http://forums.Adobe.com/index.jspa

• KB976765.msp 3:-2147287037

  Hi all

  I've been maintaining a customer with a HP DC5800 with XP SP3 32 bit.  He had a series of problems of updating Windows with the .net framework, initially because he was missing the installation directories.
  I have completely deleted all versions of .net (2 to 3.5) using this tool: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx, and brought the system to 3.5V SP1 with update cumulative dotnetfx35.exe by following the instructions at the end of this post and verified 2.0 SP2, 3.0 SP2 and 3.5 SP1 have been installed correctly using the netfx_setupverifier tool
  After this point, I was able to apply several updates by using Windows Update, but I'm currently at a point where KB982168 continually errors with 0 x 663.
  Looking at the log file, a saw that the passage, located directly after my writing, contains what seems to be the offending error.
  I wonder why it sews, because I have installed 2, 0 3.5 and checked that they were OK withhttp://blogs.msdn.com/cfs-file.ashx/__key/communityserver-components-postattachments/00-08-99-90-04/netfx_5F00_setupverifier_5F00_new.zip, which seems to be getting this error 2.0 SP2.
  Someone at - he hints/suggestions
  ?
  Thank you very much.   It's driving me crazy.
  mlitinCN
  The Passage that contains the error

  *********************************
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: Media enabled only if the package is safe.
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: looking for sourcelist for product {CE914C4B-AC50-31E8-9DA2-15DB29D8568F}
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: added {CE914C4B-AC50-31E8-9DA2-15DB29D8568F}; for the potential sourcelist (pcode; disc; relpath) list.
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: check now product {CE914C4B-AC50-31E8-9DA2-15DB29D8568F}
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: Media is enabled for the product.
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: attempting to use LastUsedSource from source list.
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: source c:\727673e66f2fbe46f38ab1\ by train.
  MSI (s) (90:C8) [05:56:26:750]: Note: 1: 2203 2: c:\727673e66f2fbe46f38ab1\NDP20SP2-KB976765.msp 3:-2147287037
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
  MSI (s) (90:C8) [05:56:26:750]: Note: 1: 1706 2:-2147483647 3: NDP20SP2 - KB976765.msp
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: processing NET source list.
  MSI (s) (90:C8) [05:56:26:750]: Note: 1: 1706 2:-2147483647 3: NDP20SP2 - KB976765.msp
  MSI (s) (90:C8) [05:56:26:750]: SOURCEMGMT: processing media source list.
  MSI (s) (90:C8) [05:56:26:765]: SOURCEMGMT: resolved source: ' NDP20SP2 - KB976765.msp'
  MSI (s) (90:C8) [05:56:26:765]: Note: 1: 1314 2: NDP20SP2 - KB976765.msp
  MSI (s) (90:C8) [05:56:26:765]: cannot create a temporary copy of the patch ' NDP20SP2 - KB976765.msp'.
  MSI (s) (90:C8) [05:56:26:765]: product: Microsoft .NET Framework 2.0 Service Pack 2 - update '{2E6863BB-4082-3B05-BB2C-20EF16D4BD82}' could not be installed. Error code 1635. Additional information is available in the logfile C:\DOCUME~1\admin\LOCALS~1\Temp\Microsoft .NET Framework 3.0 - KB982168_20110920_105554062 - Msi0.txt.
  MSI (s) (90:C8) [05:56:26:765]: Note: 1: 1708
  MSI (s) (90:C8) [05:56:26:765]: Note: 1: 2729
  MSI (s) (90:C8) [05:56:26:765]: Note: 1: 2729
  MSI (s) (90:C8) [05:56:26:765]: product: Microsoft .NET Framework 2.0 Service Pack 2 - Installation failed.
  ****************************************************
  The statement used to remove and reinstall .net Framework
  ********************************************************************
  Step 1: Remove the .NET Framework using the removal tool

  ==========================

  KB2538242, on the other hand, is a security related update.

  Official version:

  See the section "How to get help" of http://support.microsoft.com/kb/2538242

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  Unofficial version: I sent many users to Support MS by the above on KB2538242. In all cases, the technical support basically threw up his hands in frustration and told the user that there "really don't need updating so just hide it."  True story - YMMV.

  Good luck!

• I have a disk full of photos that I am unable to see the end of the name of the MSP file.

  original title: pvm?

  I have a lot of pictures that I am unable to see the end of the name of the MSP file, that - what it means or what program can be used to open them to see to change this?

  http://www.HP.com/United-States/consumer/digital_photography/free/software/index_ww_eng.html

• VSOM MSP RHEL Server runtime error

  Hello

  I encountered the problem in VSOM in MSP RHEL Server loading. Login page displays no value. Error loading /media1 during the startup process of RHEL. It says "editing local files system error" and "mount: structure needs to be cleaned. After reviewing the status of service cisco, VSOM is down and in the end "/ media1 is not mounted.

  Anyone has idea or has encountered such a problem, please advise. Thank you.

  Hey Ritchie,

  I think that the option we're trying to do repair is not help us here,

  Run the command again to repair, also follow them above below the foregoing steps above mount the partition.

  ++ Run xfs_repair for /media1

  #-L/dev/sdc1 xfs_repair-l/dev/sdc2

  Represent-L Force newspaper zero setting, let me know if no query.

  Thank you

  Maëlle

• VGA SIS Mirage 3 for WIndows 8

  Help me please on VGA SIS Mirage 3 driver for Windows 8?

  Thank you

  Hello

  The manufacturer is responsible for the OEM drivers. Check with their support,
  their documentation online and drivers and ask questions in the forums (if any) on any
  known issues. If there is no Windows 8 drivers don't try to use the latest Windows 7
  versions.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• OM_5.4.0_Man_Node_A01.msp installation fails (Windows Server 2008 x 64)

  I can't get it to load the patch installer. Of course, life would be easier if Dell has released a proper version of OpenManage (with support for Windows Server 2008 x 64).

  Here are the instructions...

  Application of the Service Pack
  1 double-click the MSP file or enter the following in a command prompt window:
  MsiExec.exe /p OM_5.4.0_Man_Node_A01.msp

  And the error message...

  Windows install

  The upgrade patch cannot be installed by the Windows Installer because the program to be upgraded is may be missing, or the upgrade patch may be a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.

  
  

• Annex MSP import in Instantis

  I am trying to download the MSP project schedule in Instantis.  I have the plug to download and I can get to the point where I choose the file I want to have the Instantis to convert the .xml file, but when I choose that it, it asks me to choose a name for the .zip file, but it does not give me any place to do the 'ok' button is grayed out and I can't advance any further.  Can someone tell me what I am doing wrong?

  What you have to do is to create a project in Instantis with a calendar template (I use Ad - hoc activity) and set the dates of beginning and end of project.  Add your resources.  Export the calendar of MSP.  Copy the rows/columns you want to use your MSP MPP file and overlay the calendar exported Instantis.  Export the calendar back to Instantis and you should be ready to go.

• Adobe Reader Script 11.0.0 - install .msi + MST + msp

  Hi all

  I try to install in silent mode: Adobe Reader 11.0.0 + STD and with spots 10.0.1 + 10.0.2

  My .bat:

  "MsiExec.exe/i/qn" % ~ dp0\SETUP\AcroRead.msi "PATCH="%~dp0\SETUP\AdbeRdrUpd11001_MUI.msp "PATCH="%~dp0\SETUP\AdbeRdrSecUpd11002.msp "TRANSFORMS is"AcroRead.mst ".

  But I have an error message:

  

  My other .bat:

  MsiExec.exe /i "% ~ dp0\SETUP\AcroRead.msi" TRANSFORMS = "AcroRead.mst" / qn /norestart "

  MsiExec.exe/Update "% ~ dp0\SETUP\AdbeRdrUpd11001_MUI.msp" /qn /norestart

  MsiExec.exe/Update "% ~ dp0\SETUP\AdbeRdrSecUpd11002.msp" /qn /norestart

  That one works fine, but I want to put him in one line.

  Thanks to you all

  Hi christopheg98108552 ,

  Inform that you can install the latest version of Acrobat Reader all of its updates are cumulative.

  You can also try to install the application by using the command line, refer to this article:-

  https://www.Adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Cmdline.html

  Kind regards

  Christian

• Mirage does not list the info of the base for certain machines...

  Impossible for the life of me figure out why Mirage does not show what base layer has a machine. It seems random see photo below. When the base coat is not listed, you can apply layers app because the option is grayed out. The only way I can fix it, is to re - allocate a base layer. but isn't ideal...

  I use Mirage 5.6

  

  Hello

  I can only imagine that you have may have removed a CVD and Centraliced the CVD again without choosing a BaseLayer.

  If you do this, then you will get CVDs where no BaseLayer will be shown and then the only way to solve this is really to give the last reused BaseLayer on this device.

  If it appears out of the blue so it's a bug of Mirage and you open a support for this call.

  Timo

• Configuration of server SSL Mirage?

  Hi community

  I have problems to install the Mirage server, installation failed when you set up the server with SSL. I have create a signed self web server certs internal for our internal CA according to the video

  Mirage of VMware: Preparation of internal CA signed certificate SSL - YouTube

  I import the cert under Local computer and also the title of trusted root certificates, but always with no luck... error is still the same I checked also the permission (I m Domain Admin) and there is no error in the subject or...

  

  Any ideas how to solve this problem?

  Best regards

  Fixed it with disable UAC in the register only with msconfig is not enough ;-)

• Mirage Server installation fails: the server failed to register

  Quick history: the single server installation (Server 2012 R2 w / SQL Express 2012) using the version 5.5.05294 for all components. I have a dedicated domain service account and management group that has local administrator rights and I am connected using this account. I have disabled UAC completely. I've successfully installed the Mirage Management Server and the SQL database looks good. I installed the Console of Mirage as well and can connect to the server and load the license key.

  Here is the error I get when you install the Mirage server:

  

  It does not right 'Record VMWare Mirage to the Cluster of servers', which is located just past the step where it checks the version compatibility. If I go back to the Console, I've seen the Mirage Server installed, but gives the status of "Version mismatch". I am 100% certain that the version is the same (5.5.0.5294) and even when so far to control binary files and the SQL database to ensure that all list 05294 version:

  

  As you can see, the version is the same and I have already installed the management server:

  

  You look at the log of the server installation.

  Install using:

  msiexec /i INSTALLATION_PATH/l * v LOG_FILE

  Open the log file and look for errors after the message, it could lead you in the right direction (post the log of the excerpts here)

  Make sure that your Mirage account has the correct permissions in AD (KB 2105800 details most of them).

  Also, make sure that the user has read permissions to users and computers basic UO in AD.

• Impossible to install a security update on Acrobat Reader DC because the previous version of the product has been installed with the package integrated MSP

  Hi all.

  I'm trying to 15.010.20056 update is installed on 15.009.20079 version of Acrobat Reader the domain controller that was installed as integrated (with the updates included) package in our corporate environment. So during the installation, I get these errors: 1328 and 1603. If I uninstall the current version of MS, install 2015.007.20033 (most recent Adobe site) version and then install updated security, everything is going very well. How to solve this problem?

  I assume that you have installed 15.009.20079 by AIP. Is that this is the case, then you won't able to correct this AIP installation at 15.010.20056.

  Because of facilities using setup.exe will be updated at the latest by only applying the fix. Please refer toRe: AcroRdrDC1501020056 msp and msi as always ~ ~ for more details.

  If you have not used of AIP, please let us know so that we can continue.