MSVCR71 were found not to re-installingthe app mayfix the problem

Similar Questions

• Computer has recently been corrected it now say windows is not genuine, go online to solve the problem. Windows validation does not any ideas how I can fix this

  Computer has recently been corrected it now say windows is not genuine, go online to solve the problem.  Windows validation does not any ideas how I can fix this

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  IMPORTANT -online if you run Windows 7 or Vista 64-bit, you must Access the site via IE 32 bits only!]

  `~`

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx>

  `~`

  If you are still not able to validate your Vista installation, follow these steps:

  I. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062>

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  II. after running the tool, click on the button continue, and then click the copy button (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  III. start a new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  >>

  >

  IV. A help desk specialist will analyze the data and recommend an appropriate solution.

  UTC/GMT is 21:28 Friday, December 2, 2011

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• audio and video not synchronized. returned to projects already finished and they also are not synchronized. What could be the problem?

  Audio and video not synchronized. Returned to previously published projects and they also now not synced. What could be the problem?

  Figured that generator out of sync unplugged. Thank you

• Comcast mail will not work on Mail.app PORT 995 problem once again!

  OK, so this problem has arisen in the last days.

  I can't send or receive mail from Comcast in Mail.app

  At first, it was the 995 problem, but now it just says:

  The server returned the error: the attempt to send data to the server "mail.comcast.net" failed.

  After three calls to Comcast, told me it's because Mail.app, because "Apple changed something in the application.

  Is not the thing the more ridiculous than you already heard? I have not updated anything either and to my knowledge, Apple is just change your app on your hard drive.

  Twice before, Comcast, once they have admitted that the problem was theirs, has been able to fix it. But not now.

  Yes I can get mail on the web, but it's stupid, and I need to use the POP email... I work online all day.

  They suggested one of the ports be changed from 587 to 465 but that doesn't work anymore. I use SSL with PW auth.

  I have set up scores of Mac for people and this isn't a problem with Mail.app, but a Comcast server problem that they will NOT admit.

  Anyone having this problem and what to do? I have about 50 other emails configured, are not those of the areas will on the same PIPE and using the VERY SAME SETTINGS to SEND?

  Have you tried the settings for IMAP e-mail? Or is your requirement such that you need POP?

  http://customer.Xfinity.com/help-and-support/Internet/email-client-programs-with - xfinity-email.

  How to set up a Comcast Email in Mail | CityMac

• ExplorerFrame.dll is not working and unable to solve the problem of other similar positions. Who can help me?

  Windows Vista Edition Home Premium. I can't looking for photos, Control Panel, computer etc... He said: "class not registered" when I click on any folder. I googled the error and solutions must go to cmd.exe and type regsvr32 ExplorerFrame.dll. Do that and it doesn't work. I get a response that says: "ExplorerFrame.dll" module is not compatible with the version of Windows that you are running. Check if the module is compatible with a x 86 (32 bit) or x 64 (64-bit) version of regsvr32.exe. »

  I also tried sfc/scannow and that crosses and said errors were found and he was not able to fix all the. It's that I got. I hope that someone who has had this problem can help me find a solution.

  Kevin

  Hi Kevin, welcome Microsoft answers forum! You did changes to the computer? Have you installed the latest windows updates? Step 1: Check if windows is enabled, if not, go ahead and activate windows how to activate Windows Vista http://support.microsoft.com/kb/940315 step 2: install the latest windows updates.

  Step 3: Check with a different user profile

  If you do not have a different user account, you will need to create a.  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Step 4: Online a scanner for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  You can check the link that addresses a similar issue and try to install the hotfix mentioned in KB 935855 http://social.technet.microsoft.com/Forums/en-US/itprovistadesktopui/thread/1480f05f-f2a5-4e43-9c78-39ddf9193d93

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Primary - eve app has the problem

  Dear all,
  
  I have a primary - eve of installing oracle 10 g 2 on Linux. My backup database is a database of physical intelligence.
  It was working fine since there an abnormal reboot on the computer to sleep. My primary database OEM says:
  August 7, 2011 11:28:46 Data Guard of STANDBYDB status is error ORA-03135: connection lost contact. It shows in detail: error ORA-01034: ORACLE is not available
  
  Now the problem is that my archive logs is not applied to the standby database. When I query on the primary database, last few records are as follows:
  
  Select sequence #, applied to the order of v$ archived_log by sequence #.
  10541 NO.
  10542 NO.
  NO. 10543
  10544 NO.
  10545 NO.
  NO. 10546
  NO. 10547
  * 10548 * NO.
  
  When I request pending, last few records is:
  YES 10506
  YES 10507
  YES 10508
  YES 10509
  YES 10510
  YES 10511
  YES 10512
  * 10513 * YES
  
  Waiting since sequence 10513 newspapers are not applied.
  
  I have already check now:
  
  (1) my physical standby database is in State of Mount and listener is
  (2) I can't tnsping my database primary data pending
  (3) I can see the archived logs is passed from primary to standby, are there physical files.
  
  Kindly help me to solve this problem.
  
  Thanks, Imran

  You can see the values for ORACLE_HOME used on the backup site.

  I would say looking for multiples / characters, or a leak late in the ORACLE_HOME /.

  A mismatch between the value in listener.ora and the value defined in the shell over that Eve was launched could cause something like this.

• Apps of the problem running in the Simulator - net_rim_xml not found.

  I'm starting to do some Java development. I'm under the Simulator in Windows using the JDE environment to see how the code works.  (I normally run Ubuntu as my main OS.)

  I can run all the examples of code very well when my Simulator is a 9500-JDE, but when I switch to a 8300-ATT-JDE - 4.2 I get a message, "the Source code is not available" in the java window not found 'Module 'net_rim_xml_org'. Error starting : Module 'net_rim_xml_org' not found. »

  What happens on a XP (running under VirtualBox) instance and an instance of Windows 7.

  I installed and re-installed the JDE just to see.

  I also googled and not found the answer.

  TIA

  The code is forward but not backward compatible.

  You develop using JDE 4.7 I guess, so you can execute code in 4.7 or higher.

  Develop for a race of 8300 4.2.1 (Simulator or device), you'll need JDE 4.2.1.

• I constantly get this pop-up, ' Exc in ev handl: TypeError: oSAPlg.oRoot.log is not a function. " What is the problem and how can I solve this problem?

  I received a lot of emails from trash and other deleted all my cookies and history. Now, I'm getting this pop-up and it is interfering with my use of the internet, ' Exc in ev handl: TypeError: oSAPlg.oRoot.log is not a function. " What is it and how can it be fixed, removed, managed to get rid of, etc. Thank you

  I've been working on what's wrong. She can do with McAfee Siteadvisor. I disabled suitable siteadvisor who never stopped popping up messages.

• If I change my hard dsik which would mean I have to buy a new windows OS / if not then how can I solve the problem?

  I would like to change my HDD without having to buy a new Windows operating system. And I'm not sure if it is possible or not.

  The motherboard is not defective, correct?  If you override to 'improve' the unit and the original motherboard is not defective, then, Yes, you will need to purchase a new license.  You've essentially created a new machine.

  In this case, you will need to purchase a new license.

  Since the motherboard contains the processor and is "the heart and soul" of the PC, then replacement of the motherboard (for other reasons than to default) a new PC is essentially created. The system integrator original manufactured not this new PC and cannot therefore be expected to support it.

  In this case, you can use the original license:

  If the motherboard is replaced because it is defective, you do not need to purchase a new license of PC operating system as long as the replacement motherboard is the same make and model or equivalent/replacement by the manufacturer, as defined by the manufacturer warranty of.

• I have a genunie product key but it does not work. How to solve the problem?

  I bought a PC refurbished which came with license Windows XP Pro renovated the Micro Center near my house. My son got the infected PC and so I decided to reinstall the operating system. I used the product key on the label of license on the PC, but it did not work. I went to Micro Center for help, but they have had the same problem and then I recommend to contact Microsoft Support. To my surprise, it is so hard to get help from Microsoft even if I have a license and use a product of Microsoft Genunie. Is this an easy problem to solve, or should I complain (or continue) Microsoft to have this problem resolved? Thanks adavance.

  My suspicion is that it's a SP3 - the description of the disc key you give seems to be right (from what little I can find that the part number on the web) for a disk of SP2.

  You may be able to confirm this by calling an Activation Center and asking them to confirm the validity of the key - use your local number in this list.

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• When I hit start to search fall on computer files any files not listed. What could be the problem?

  No files don't show at all. When I type in a file and hit search it will not search for files. He worked in a couple of weeks. I even restored your system to an earlier date, but still nothing.

  Hello IJAllen,

  When you checked to see if the Windows Search service was running, was it?    Please visit the link below and let us know the status.

  Search for Windows 7 - does not return the content of the files - suite

  http://social.technet.Microsoft.com/forums/en/w7itproui/thread/ecbecc00-f3e7-429f-87cd-8900fc313add

• Whenever I try to upgrade Vista to Windows 7, I get the following "the mode is not supported on this platform" what the problem is. ?

  Try to upgrade Ulitmate from Vista to Windows 7 Ultimate

  If you purchased Windows 7 Upgrade

  You try to go from 32 bit to 64 bit? You can't go from 32 bit to 64 bit, a clean install is required. If you have any questions about the upgrade from 32 bit to 64 bit or vice versa, please see this FAQ: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  If you have purchased a "Anytime Upgrade"
  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.
  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  New installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  Installation - 'upgrade' means what?
  Upgrade means that you can install Windows 7 simply by inserting the Windows 7 upgrade software in the DVD drive of your PC and follow the instructions on the screen. While you are not required to backup and reinstall your files, or reinstall your programs, it is a very good idea to back up your files and settings before you start any upgrade to the software. Get more information on the software updates and best practices .

  Installation - what does "Custom (Clean)" Mean?
  A custom (clean) installation clears the contents of the hard drive of your PC. Your files, settings, and programs will not be transferred to Windows 7. This means that to install Windows 7, you must:

  • Back up any files and settings you want to keep

  • Install Windows 7

  • Reinstall all your files

  • Reinstall all the programs you want to use.

  These four steps take time, skills, techniques and Windows Easy Transfer can help. However, if you are not comfortable with this process, please consider having the installation carried out by a local service provider.

• Does not Xperia m4 aqua - switch on the problem

  A day after the update a few days ago, I noticed switching on the issue.

  When I switch on the phone screen, black spirit Xperia logo appears and flashes slowly.

  Hard reset and 120 sec reset method - no positive results.

  I tried PC companion - repair is no problem, but when I try to turn on the phone - always the same-screen black with the logo result.

  I need help - any other procedure to do? or repair service will be the solution?

  BR

  Rafal

  Hi @rafalc,

  I'm sorry to hear that.

  If the repair of software did not help, then it seems not that your phone is in need of service. I suggest you contact your team of Local support for more information on how to here.

• My 'system restore' will not initialize. How to fix the problem?

  "When I choose a restore point, restoration says" initialization ", but it will work for ten minutes, never boot if you don't stop him. When I reboot sytem and click on system restore. It is said to "undo the last restoration. It is never initialized first. I used restore before but never had this problem. What I have done or not done?

  Great help, Scott.  You jerk off.