MU USB ports are no longer works?

Similar Questions

• HP Pavilion g6: My USB ports are no longer works. Can anyone share their expertise?

  I'm going to design mananger and it shows a yellow typical mark next to the universal serial bus. I tried to update the driver but there no driver not installed.

  Hello, I have restart my PC and restore it to its original from the manufacturer. I lost everything on my computer, but it's ok now, my USB ports are working properly. Thank you for your help.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• Satellite M30 - 344 - USB 2.0 no longer works

  Hello

  Since 2004, I have a Satellite M30-344. Some time ago, I changed my system from XP home to XP pro and my USB 2.0 no longer works since. I need to use XP pro because XP home does ' t run some CAD software that I use. Can I do about this problem? I could not find the USB drivers in the Toshiba downloads.

  See you soon,.

  Kat

  I agree with Sascha.
  But you also need to install SP2!

  This is necessary and important. I put t know if you already use the SP2 or not, but it must be installed on your laptop to get the USB ports work!

• HP Pavilion dv7-6b78us: 2 ports keyboard no longer work after replacing

  I replaced the keyboard on this laptop a few hours ago. When I got to the top, the two USB ports on the right side of the laptop don't work anymore.

  I have disconnected all devices from ports, uninstalled all the USB drivers, shut down, unplugged from power and removed the battery for more than 30 minutes.

  I've got it backwards, propelled the drivers installed, but the two USB ports were not always working.

  I checked the Device Manager to verify that there is no (!) ot (?) by devices.

  I did a system restore from a point I knew for sure they worked, which was five days ago. Still no luck.

  It's really not cool.

  If anyone can provide solutions, I would appreciate it.

  Sincerely,

  Tom

  The right USB ports are on a separate Board that plugs into the motherboard with a cable that runs under the keyboard.

  Manual

  See page 77.

  It is not impossible that you hit somehow the connection usb Board cable during the installation of the keyboard. I don't see any other explanation.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• USB ports are interchangeable?

  I have 8 Ports USB connected to my computer and 3 USB Ports are used by a printer, Scanner and Webcam. I'm sure all three devices are Plug 'n' play.

  The devices work well but that they still work if they have been placed in a different USB port and a new device (e.g. headphones) can be placed in one of the USB Ports 8 or are each USB port ' device-specific?

  Thank you.

  S1

  They will work very well.  Some of your USB ports are more Rapids and those that should be used for devices that can use the speed, if necessary.  What happens is when you switch from one port to the other that a driver for this device is installed on this port.

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• I need to adjust my bios so that my usb ports are active immediately.

  I can't go in safe mode because my keyboard is a keyboard wired usb and the usb ports are not on the time that I have to press F8 (or any function key). I understand there is a setting that I could make to the registry. Can someone give me the specs?

  I'm using Windows 7 Ultimate 64 bit with a HP Pavilion Elite M9600t

  I bought the Logitech K800. It works very well (touch wood). The function keys, I get into safe mode, etc.

  DETECTIVE CONAN. Thank you!!!

• Portege M500 cannot start when the USB ports are loaded

  We have a M500 that recently seems to be affected by start-up problems when the USB ports are loaded with things like KB and Wireless Mouse USB external adapter.

  When these ports are occupied at the start, all the usual tools seem do not load and the associated icons do not appear in the toolbar at the bottom of the screen. The machine in question XP Professional and has 2 GB of RAM. The machine software is generally updated. Machine seems to start normally when the USB ports are empty.

  Once completed a successful boot USB ports can be occupied and the machine will then seem to operate normally.

  Any thoughts?

  Thank you.

  Hello!

  In your case, I would do a BIOS update and also the chipset driver.
  The two you can find on the Toshiba site. I m not sure but I think you have a model for Canada:
  http://www.Toshiba.ca

  Have you tested the devices USB on another computer laptop or PC? Maybe the problem is the keyboard and/or the mouse and not the laptop.

  Good bye

• Safari crashes in el capitan, search bar and tabs are no longer works

  Safari crashes in el capitan, search bar and tabs are no longer works. Happening right after the update - I installed another browser, Opera. That works, but I need to Safari anyway, so what to do?

  OS X EL CAPITAN, 10.11.3 Version

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

• T400/T500: Horizontal USB ports are there?

  Are there only vertical on the T400 and T500 USB ports?

  I think that the current T61 and R61 have ports usb place management, having 3 vertical usb ports are cramped on one side makes life a bit difficult for people with usb accessories oversized.

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• My FieldChangeListeners are no longer works

  Hello

  My code is too long to post here so I'll try to explain. I've built a number of calculators with EditFields and ButtonFields, that work well. The ButtonFields have FieldChangeListeners that do things when they are clicked.

  The last calculator to build I added a few TextSpinBoxFields in a PopupScreen. I used the SpinnerDemo to help with the code. So I can make a selection of spinners OK, but now my ButtonField listeners are no longer works. When I click a button the pop-up menu main upwards instead.

  Part of the code SpinnerDemo a navigationClick() and touchEvent() overloaded, so I wonder if they caused the problem.

  If anyone can help with this I would be very happy.

  Ah, Yes. The custom button class is indeed a problem. You need to make it react to the touch of the events. To remove the context menu, you need to uncheck as well as click on the events button. Something like this should do it:

  protected boolean touchEvent(TouchEvent message) {    switch (message.getEvent()) {    case TouchEvent.CLICK:        fieldChangeNotify(1);        // fall through    case TouchEvent.UNCLICK:        return true;    }    return super.touchEvent(message);}
  

• The Device Manager on my Windows box lists a hub USB 3.0 as one of USB controllers. This means that one or more of the USB ports are capable of 3.0?

  I recently bought a backup disk says he would run faster is it my 3.0 instead of 2.0 USB ports.

  Just try to understand the computer itself, if one of the 8 USB ports on my desktop Dell (Windows 7, 64-bit box) is capable of USB 3.0.

  Hi John,.

  The message that Windows gives is Windows telling you put a USB 3.0 device in a USB 2.0 slot and the speeds will be Cap using USB 2.0 footrest.

  If you are looking for your system on the website of Glens, it should tell you if one of the USB ports are 3.0 or not.  I think that USB 3.0 is marked with the blue wire around the ports.

• The links I created a page that I built with edge animate are no longer works.

  I created a Web page with edge lead a month ago. The links worked then. I just checked and the links are no longer working. I have no idea why.

  Thank you. I fixed and the links work now. I refine them, but the links are back. I never would have found on my own. Thank you for your help.