Multi jump problem which in 2003 Server

Similar Questions

• Windows 2003 - server problem

  When I try to connect my windows 2003 Server service, it gives below error:

  12029 - unknown error.

  On the internet I can find that 12029 - could not establish a connection to the server.

  Legacy code is written in VB6.

  Code:

  objXmlHttp.open "POST", modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "WSURL"), False
  objXmlHttp.setRequestHeader "Content-Type", "application/x-www-formulaires-urlencoded.
  objXmlHttp.setRequestHeader 'Permission', modRegistry.GetString (HKEY_LOCAL_MACHINE, "SOFTWARE\TMS\DPMS\TOMS", "Release")
  mfurlxml = "SERVICE = VALIDATE & DATA =" & URLEncode (objDom.xml)
  "objXmlHttp.send"FUNCTION = VALIDATE & DATA ="& URLEncode (objDom.xml)
  objXmlHttp.send (mfurlxml)

  I tried all ways below to make it work. Yet my request does not reach the server. Can someone help me please?

  1 has changed the default Web site to use IP addresses (all unassigned)

  2. clear firewall problem

  3. not controlled all three boxes under Internet options-> connections-> lan settings

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• P2v Windows 2003 Server

  I have a Windows 2003 Server physical that we would like P2v, but drive C has only about 100 MB remaining.  Drive D has 25 GB.    My preference is to install Converster on this server and run locally, but as the C drive is low on space, it may be better to do it remotely.   However, I was wondering if there is a way to always run locally if I install the converter on the D drive.  Is this possible?

  With only 100 MB on the left, I highly recommend you free disk space before you do anything else to avoid problems (not only related to the converter). What I did in the past in such situations, is to configure the location of the page file to the server, which will release usually a few GB (depending on its current size).

  André

• linux 4 oracle 10g client to connect to the server window 2003 server, oracle 10g

  Hello
  
  I have my 10g oracle installed on windows server 2003 server.
  On another system I have oracle 10g client is installed after edition of RedHat enterprise 4.
  
  I want to connect my client to the database server.
  
  I check using oracle universal install in that it shows installed products i.e.
  Oracle 10g client is installed on the linex system.
  
  but when I try to write a command like
  

  [oracle@satish ~]$ sqlplus$
  bash: sqlplus$: command not found
  
  [oracle@satish ~]$ tnsping
  bash: tnsping: command not found

  and it doen't show any enty applications for oracle which is strange.
  
  as I am new to linux.
  
  How to overcome this problem.
  
  Thank you
  Umesh

  Include $ORACLE_HOME/bin in your path (not only $ORACLE_HOME):

  export PATH=$PATH:/home/oracle/oracle/product/10.2.0/client_1/bin

  Werner

• Problem connecting to the server

  Whenever I open the pictures, I get an alert that reads: 'there was a problem connecting to the server "my-server", which is another Mac on my network.

  If I close the dialogue box, Photos keeps trying to connect and it appears again a few seconds later.

  Does anyone have an idea as Photos is all this and how I can stop doing?

  No idea - don't forget we can not see you if you have details

  We do not yet have an idea what software you use or you use 'MyServer' for

  What are the versions of the operating system and Photos do you use? What is your server? How are you connected to it?

  LN

• Satellite A300-29N - installation of Windows 2003 server displays an error

  Hello
  Tried to install Windows 2003 Server new Toshiba A300-29N get error.
  -------------
  Search for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
  Technical information:
  Stop: 0x0000007B (0xF789E63C, 0xc0000034, 0x00000000, 0 x 0000000)
  ------------
  The one facing this problem and any updates.
  Concerning
  Samir

  Hello

  I m wondering that you want to install Windows server on a laptop...

  In any case, it is a known problem and also happens on XP and Vista. To fix this you need to use the laptop SATA driver or you change the SATA mode in the BIOS by AHCI compatible, then you don't need a driver.

  Here are some instructions that might be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  I do not know if you will get a driver for Server 2003 but you can try the XP driver and in the worst cases, it must use compatible mode m.

  Let me give you a little advice: If you have other questions, use the forum search. You can find hundreds of discussions about this.

• can I install Windows 2003 server in my computer hp laptop pav14-v021tu

  Hai

  My system came with windows 8, when I bought.

  But now I thing I finstalling windows server 2003 in this laptop, I heard from my local technician some computers laptops hp does not support Server 2003 (he said need some drivers from hard disk sata hard or something like that)

  As I have not super-hotel with this stuff,

  some we can't so please say argues this model the windows sever 2003 if so this laptop has no other than the Server 2003 addinational drivers to work

  Thank you

  Hello:

  The technician is correct on the sata drivers are needed.

  The problem is that your laptop is an Intel 4th generation of processor and chipset of the 8 series.

  Intel develops not all drivers sata for this chipset, so windows XP and 2003 server will not install on the PC with this chipset.  Nor are there at - he graphics drivers for Windows 2003 server, and probably many other features would not have driver support for hardware that your PC has.

• (2003 server) error 2019: the server was unable to allocate from the system non-paged pool because the pool was empty

  Hello

  I have a Windows 2003 server and get error (Server 2003) 2019: the server was unable to allocate from the system non-paged pool because the pool was empty.

  If anyone has encountered this error and has an instruction step by step to solve this problem please let me know.

  appreciate the help!

  Sincerely,

  Riaz

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Extremely slow CHKDSK on external Drobo B1200i connected to a Windows 2003 Server)

  (I have a Drobo B1200i related to an unresolved external server) windows 2003 Server), with 9 x 4, double redundancy to discs. The scoreboard shows that all drives are healthy. The player has 2 LUNs. One of the units is 16TO and used to store data, some are small files and some are large files. We found errors when you try to save this logical unit, which prompted running chkdsk. Run us CHKDSK G:/x/f/r it was launched on 22 may at 18:00. He ran steps 1-3 to 25 may, making hundreds of repairs (deleting entry index... recovery of file... orphans replacing non-security IDS valid... Insert the attribute data to place...)

  He has been blocked since May 25 (for 3.5 days) 60% of the step 4 of 5, moving very slowly. Currently, it reads "(14191283 of 20660608 processed files) all 60 percent" the number of processed files remains to be the same number of hours and moves upward then 5000 files and then a few hours left in the same issue for others... At this rate, it may take 3-4 months at the end!

  My questions are the following:

  1 - is it normal to take this amount of time with the large disk like mine (16 TB)?

  2. is there a risk of data loss if I stop it now?

  3. is there a chance that what has already been solved during the early stages is all that was needed, and that interrupts it the process now will be harmless?

  4. If I stop the process now and errors persist, and I decide to run CHKDSK again, it run faster for the early stages and get to the current point faster than the 6 days it has taken to get this far? or it will take another 6 days to join the current point?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

  We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

  Hello MPF_mec29,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Eddie B.

• The on wins 2003 Server crypt32 error event

  Event type: WARNING

  Event source: crypt32

  Event category: no

  Event ID: 6

  Date: 27/03/2011

  Time: 13:59:38

  User: n/a

  Computer: 3K 058901

  Description:

  Reached crypt32 50 events and will suspend logging for 60 minutes

  I had this error on my Wins 2003 server, which is running the application on this matter. The server was hang somewhere and the application does not work well. Please, help me to check.

  Thank you

  Hi Robertsgrec,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as you receive an error in Windows Server machine. Appropriate in instances of Windows Server.

  Please post your question in the Forums of Windows Server.

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows® XP file Association problems? Copyright 2003 - Doug Knox? his files work?

  Windows® XP file Association problems? Copyright 2003 - Doug Knox? his files work?

  It is wrong to go all that is your problem.

  I have instructions to run the Doug Knox fix as a copy/paste of my notes, I'll never have to type it once again, which means that (at least for the EXE usual file association problem), I like to use, but we don't know what your question is.  In fact, the majority of the stuff I answer here is just a copy and paste, I have fixed some things so many times...

  Here's what I have copy and paste about afflicted EXE file associations:

  Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• Windows 2003 Server IE connectivity server is blocking unexpected drop

  President of our industry, we have 5 server but a windows 2003 Server IE connectivity server is blocking low unexpectedly.we have checked in Event Viewer it is showing the date and the EVENT ID as 6008.please answer why this is happening again and again? What is the problem behind all this?
  Thank you

  Hello Ninadskale,

  Thanks for visiting the site of the community of Microsoft Windows XP.  The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit this link for support.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!