Similar Questions

• Fusion 2 and unorthodox multi-screen configurations

  General information

  -

  ---

  In Fusion 1.x, I've managed to work around the limitation of single display using a USB video adapter connected to the virtual machine. Worked surprisingly well and after seeing some performance issues with version 2.0, I decided to stay with 1.1.3 for awhile.

  Today, I upgraded to 2.0.2 and I am happy to say that performance problems have disappeared. I have therefore been primed and ready to try the double support native monitor.

  I used successfully screen of the MacBook Pro and a monitor connected to the DVI port. Very good, I like.

  But I also have a second LCD monitor hooked up to the USB adapter, and it's wherever I meet trouble.

  A momentary digression

  -

  ---

  With the card attached to the Mac USB, the setting "Use all displays full-screen" simply does not work, and due to the limitations of the Mac DisplayLink drivers, the virtual machine is too slow on the USB Monitor anyway. So relying on the Mac for lead all three screens is a non-runner - but I was ready for it.  :|

  The problem at hand

  -

  ---

  This has left me speechless, it's that I can't return to my former arrangement. When I reinstall the USB adapter to the virtual computer and extend the Windows desktop (I'm even not attempt to use "Use all displays full screen," because I know it will be too weird for words), I find that I can't move my mouse on the secondary monitor. All sides of the main screen are impenetrable, with or without svga.noHWCursor = 'TRUE '.

  Curiously, I can send windows to the other screen using certain features of UltraMon, if it is available for Windows. But I'm limited to interact with it using the keyboard. I guess there are some collisions here between Windows Media Monitor and Fusion, and my poor mouse is to take the shot.

  Short of attaching a mouse directly to the virtual machine (yuck), is there a way around this? Is there a VMX parameter which would disable the feature in Fusion 2 multi-screen display, or what I need to get off the virtual machine or back to the 1.x version of VMware tools?

  It would be a shame - otherwise I like 2.0.2.

  I don't think that there is a setting to revert to the behavior of 1.x, display management is not something that you can easily swap. I think you're right about the gap between what Fusion think is the usable area and what the customer thinks is usable as the cause of the observed behavior.

• Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

  Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please

  Try recovery Mode

  Connect your device to your computer and open iTunes.

  When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.

  Keep now until see you the recovery mode screen and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• I try the installation key OEM Office or upgrade to another version of Vista

  Hi, I had the same problem here.

  until someone shows me at the door, shouting that I have tried the vista OEM key to install office or upgrade to another version of vista, here are the facts:

  -C' is my work laptop.
  -It was installed with a volume work XP pro license.
  -J' changed jobs, negotiated to keep my laptop in the process.
  -I'm legitimate, I don't want the volume from my previous job license.
  -I am reloading the preinstalled version of vista from the CD supplied with the notebook microsoft (not the CD before installing, I wanted a windows clean and neat)
  -L' label on the back of the PC say "vista home premium OEMAct".
  -I am running windows vista Home premium
  -J' I updated my bios to the latest version
  -vista will not activate automatically.
  -J' tried to call microsoft for manual activation. the IDS are recognized (if you try to enter a wrong number, it is said that there is a mistake), but when I hit "next" after having typed the ID told me on the phone, I get an error indicating that the code is wrong.

  a now I get the Activation Assistant 0xC004E002 error when I try to run it.

  I don't see what I did wrong... someone has a lead what to do next, other than reinstalling windows?
  I don't want to bother to reinstall all drivers and applications (openoffice, java, firefox, xnview, avira antivir...) that I just installed.
  And I want a working solution, as I am not really convinced that reinstall windows don't lead me to the same problem on new.

  Thanks in advance.

  Best regards
  hateshinai.

  Post edited by: hateshinai

  Hello

  First of all-> you have a Toshiba laptop?
  If so,-> to the Vista preinstalled on your laptop is already activated!

  The key at the bottom of the device belongs to the OEM of Vista version and it is just a confirmation that you are using a legal Vista operating system.
  The key cannot be used with MS Office and other versions of Vista!

  If you want to upgrade the Vista then you will probably get a new key from Microsoft.

• HP-431. Can't change my monitor resolution and screen brightness after upgrade to windows pro 8.1

  I can't change the resolution of my screen and the brightness of the screen after I upgraded the Windows of windows 7 ultimate for windows pro 8.1 build 9600

  I have already installed the graphics card, but I can't change my resolution of more than 1024 x 768

  My laptop is HP 431 with processor intel core i3 - 2310 m 2.10 GHz, AMD graphics 7450 M DDR3 1 GB HD (I don't know why, but I have already installed graphics AMD HD series 7400 M because my laptop is not compatible with the other AMD graphics), 64-bit OS

  I think that's the problem
  http://prntscr.com/3mf9l5
  What do you think guys?

  Please, help me

  Thank you

  I'm sorry that this driver has not worked.

  The pilot I posted should be only for laptops with the series 7 Intel chipsets.

  I guess W8.1 is not in charge of your model.

  You can see if this W8 driver works, but I think that nothing is going to work for this model.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_110852_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• I wipe my keyboard and mouse with a paper towel and the screen flipped sideways, how I recover the right way? /

  I wipe my laptop and keyboard mouse with a paper towel and the screen turned sideways, how I recover the right way?

  Hi ken1957,

  Try pressing Ctrl +or to rotate the screen.

• When I uninstall & reinstall MS-Windows & MS-Office (HDisk upgrade do), how to avoid licenses lose

  Hey there

  How to avoid Microsoft OS & Office licenses to lose?
  I want to upgrade the hard drives on my PC 2,
  * PC1 has Windows 7 Professional and Office 2010
  * PC2 has Windows 7 Home Premium and Office 2007
  When I uninstall & reinstall MS-Windows & MS-Office (HDisk upgrade do), how to avoid licenses lose?

  Because it's the same machine, you don't deplete all your licenses when you reinstall on the same hardware. In some cases, the reactivation by phone may be required:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  How to reactivate Microsoft Office:

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

• Wimdows 8 erased office 2007 upgrade

  My machine was purchased with office 97. A few years back I bought an electronic update to office 2007.  Upgrade to office windows 8 deleted 2007.  I reloaded office 97, but I'm not clear how to get upgrade office 2007 electronics, I bought.  I have the product key for the disc of original Office 97, but not for the office 2007 upgrade electronics.  Follow you these electronic updates by the original product key? What should I do? Mike

  See the following topics:

  http://www.Microsoft.com/office/backup2007/en-us/default.mspx

  If you have no receipt of the software, unfortunately, you will need to purchase a new license.

• Support multi-screen in mode 4

  I was under the impression that view 4 was going to be true instead of the multi-monitor support rdp version and using splitview.  We were waiting for version 4 so we could ride on all desktop computers, and I still don't.  In fact, when I choose multi-monitor it won't cover even two monitos now.  Someone at - it ideas?

  In this capture customer screen display is running in windowed mode and it would not use or adapt to mutimonitor as the application window is treated as a solid glass.

  In the capture of the attached screen shots you will notice I have spin a session which begins in multi-screen, changes of are displayed and finally back to multiscreen as follows.

  Start view customer / login / multimonitor desktop selection / select / select Connect (PCoIP is my default)

  See screen-one shot

  I can take this mode session window as yours, by selecting exit full screen in the bar of the shadow. As you can see, the View Client is running in windowed mode and adjusted the desktop virtual to fit the window and tilted in single display mode resolution.

  See screen-two screenshot

  I also took a third page where I manually expanded the Client of the view window on the two screens of my client. As you can see, even when he has automatically adjusted for virtual the desktop resolution to match the new size of the window.

  See screenshot screen-three

  This is the expected behavior in this multi-screen intervenes only when you start a session in multi-screen mode. It does not knock when you are in windowed mode. Looking for multimonitor when running in windowed mode?

  Affects your screenshot, it appears that the resolution has not been reset or adjust which is an indication that the multimon parameters have not always taken. The virtual machine must be powered down at least once after the changes. Did you turn off the power or reset / reboot? A reset/reboot will not work.

  WP

• Video upgrade - business multi-screen on Optiplex 755 MT

  People,

  Please, let me share my upgrade of success a good end of the Dell Optiplex 755 MT for multi-monitor lease.

  If you are looking to use a great system for companies, but want to add multiple monitors (which is fantastic for productivity), so this solution might be nice for you.  And do graphics multi-monitor solution that works is easy and difficult at the same time!   It's easy if all the material is known to work together!  This note is therefore, on this topic.

  * With the help of ATI over-pants 2450 in 16th housing PCI Express.

  * Four monitors (via VGA or DVI adapters included) OVER the motherboard video still works!

  * Updated the BIOS to the most recent.

  * Note that this card works PCI 2.0, and it works in what is apparently a PCIe 1 location. on the MOBO 755 0 a.  A 2.1 card may not work.

  * This is for businesses and all five monitors work fine now, even with YouTube.  This is not intended as a game environment.

  * There are a few things to try in BIOS in terms of parameters - for a while, there was a mistake of memory and the thing wouldn't start - it took a little time to understand the exact configuration of he.

  * WIndows 7 is the operating system used - and Windows Aero works.

  * I'm not long seen accidents associated with old Jaton NVidia PCI cards that we used previously.

  * The physical slot size are fine.

  * Consumption looks very good.

  * Cost of ITX Canada was about $250 more shipping, tax etc.

  * Here's the Sapphire version of the AMD ATI card, which is very good.

  * The AMD reference number is 100-505531.

  Five monitors are not identical (three different geometries and two sellers)

  * Device Manager lists the latest AMD video drivers for this card as installed and work - I am not quite clear if the drivers have been installed from the download, or later.

  Actual installation was required for their persistence and a little hairy.  When I reboot, I'll see all noting the exact BIOS settings.

  * The system crashed not once now, in a week of constant availability, including browsers open 20 tablets or more periods and use of the physical memory of 80%.

  * System 6 GB of RAM, running 64-bit and BIOS A22.

  Good luck.

  AMD 100-505531 over-pants 2450

  http://www.Newegg.com/product/product.aspx?item=N82E16814195083

  It comes with 2 connectors DUAL DMS.

  

• No multi-screen HTML5 option is displayed in the presentation of single Source after the upgrade of RH9 project

  I opened my RH10 project and updated. Now when it opens, there is no other choice for Multiscreen HTML5 in the project settings or control panel available to Source monkey. The project has been generated/unreleased using WebHelp, but the idea was to be able to move in multi-monitor configurations. Any suggestions?

  Answered my own question. I went project Set-up/screen layouts, right click, chose the new provision of the screen and all added one by one. Then single Source layouts, right-click, new layout and choose Multiscreen HTML5 in the output Type.

  Not as easy to convert as I would have thought/expected so I'm leaving this here to help someone else.

• Problem with Microsoft Office, after upgrade Windows 8.1

  Simple and straight to the point.  After the upgrade to Windows 8.1 my Office Home and Student 2010 will only work for 15 minutes after the installation, and then after that the logo for Word or Excel screen rises, opens ever, not useful to insert the disc, the execution of repairs, which reuqires reboot of the system, whenever I need to use Word or Excel.  Someone please tell me there is a simple solution for this problem.

  Victorymarketin, welcome to the forum.

  Since they are two Microsoft programs, I suggest to contact MS Service customer assistance.  They always took me and running in short order.  It's always my solution when I have MS related problems.  They if anyone can solve your problem.

  If your problem is solved, please click "accept as a Solution.

• What is the text on the lock below screen date, after upgrade to IOS 10?

  Hello

  I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

  What is - this and how can I remove it?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see

  Apple logo.

  It may take 30 seconds.

  See you soon

  Brian

• has dropped iPhone 5s in water with screen cracked how can I recover my contacts and photos on my macbook?

  dropped my iPhone 5s in the water with a cracked screen it still rings etc. but can't see screen how can I recover my contacts and photos on my macbook

  If you have an iTunes backup - you can restore on a new phone

  If your photos and your contacts are synchronized on iCloud - you should be able to see by logging iCloud.com

  If you have never backed up your phone - your content may be lost

• Re: Screen corruption after upgrading memory

  I upgraded from 4 GB to 8 GB. He is recognized in the BIOS and begins to start. When windows loads the graphic screen, I get an increasing amount of horizontal lines until the machine stops. The BIOS version is 1.9

  Everything is OK is when you remove this extra RAM module?
  By the way: what model of laptop do you have?