Multiband compressor to normalize the audio--> help!

Similar Questions

• need help to normalize the audio on slides in capt.8

  I have a 100 slide project - I recorded audio for more than a few weeks (so some slides have audio louder than others). I wish the volume was the same. I tried to edit the audio of 'project', by selecting the entire waveform (ctrl A) and then clicking on adjust Audio, then normalize, then save, and then close. Does not work. Any ideas as to why? Thank you.

  Honestly, I never do that in Captivate myself, I'm on hearing to standardize. If you do not have a subscription CC, Audacity is free and can do the same trick.

• Unable to connect Equium to the audio help for cable TV SCART

  Hello

  can someone please help.

  I'm trying to connect my laptop to a fairly old TV using cables audio form jak headphone to my pc to connect to an adapter SCART then in my taking of SCART TV.

  I don't know what I'm doing right or wrong! I have sound but no picture...

  Please help woiuld be great, your

  HEEE? Why do you think that an audio output port could provide a video signal?
  Sorry, mate, but that's all just absurd!
  You cannot use an audio port for video! This will never work!

  If the laptop supports s-video output port, then you could connect the TV to the computer using a SCART-s-video cable.

• Cp5 - normalize the sound on slides

  Is there an easier way to normalize the audio through a project of 30 slides also normalize a slide at the same time?  I have eLearning Suite 2 with SoundBooth.  Tricks people would like to share?

  TIA,

  Jim Leichliter

  Open all files in SoundBooth.Then right click on one of them and click on Add to task of volumes of correspondence. Then you can match all the volumes in the Correction of Volume tab.

  Is that what you meant?

• Aspire 5745 audio worked. Now, it is not the case. Can not find the audio device. Help

  I lost my audio.  If I look in the Device Manager, it doesn't even have and the entrance to the sound and video controllers.  I need to know how to restore the audio device, then what that drivers to use.  Thanks in advance.

  Michael

  Bluetooth worked.  Now I'm back in business and everything is good,

  Thanks for your help.

• After reloading xp professional I have no audio or the audio drivers... Help

  After reloading xp professional I have no audio or the audio drivers... Help

  Visit the web page of manufacturer (on your computer) and find the section of support download & drivers of their page for your computer model and install the necessary drivers.  Those who understand the chipset (card mother motherboard chipset) and device video, audio, or network devices and so on.

  Any material support - including the software drivers that allow him to express prperly with any operating system - is the manufacturer of the equipment.

• I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

  I have a laptop asus F5R model. I use the operating system to windows xp service pack 2, I can't install the audio driver on my knees, please help me

  Download and install the last set of drivers (starting with the chipset / driver motherboard) to the ASUS support site: http://support.asus.com/download/options.aspx?SLanguage=en&type=1

  J W Stuart: http://www.pagestart.com

• Audio is disabled... All the suggestions/help?

  Hello. whenever I convert an episode of a show like family guy, the simpsons and american dad, the audio is always disabled as you hear people before you see their mouths move. Someone else has the same problem or any suggestions on how to do to stop this. (Its the "rocket" BTW)

  It is a common problem, and it's not because of the "rocket of" or Sansa. It's the fault of the process. If you have an ipod or a zune or a rocket or any video player in this case. It is a sad reality of the way things are. I suggest that you try another like WinAVi converter to convert the file, and then use MSC to add it to your device, it may help some

• How to put in place the audio on vsta home premioum? I went to control panel and I blew... Can you help me.?

  How to set up audio on vista home premioum. ? the sound on my pc was working but I unplug my headphones, I tried a few changes in the sounds Control Panel, and I think I messed with everything... can you help me pls. ?

  Hello

  
  The device high definition audio you see the list is the audio embedded; you need the default audio output. Icon click on the speaker and set it as default value. Plug your external headphones and check.

• HDMI - hdmi pc to lcd screen, image tv but not the audio please help!

  Hi guys,.

  I have spent a lot of time on the net looking for my problem... honestly, I'm so lost... Please help...

  I have connected my sony lcd TV (kdl - 40 s 2000) to my hp pavilion s3435uk pc. I get a perfect picture but no sound on the TV.

  I connected via hdmi to hdmi.

  The PC uses the colleague High Definition Audio Manager and Nividia 8400 sound card.

  (already tried updates and make back update)

  I have the audio set on the Realtek hdmi output and checked the formats supported, or 48 kHz (as recommended).

  equipment has been connect in the recommended sequence.

  Here is a link to the full specification on the pc (just in case someone might be interested)

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01421671&lang=en&cc=us&Conte...

  the TV has no option to turn audion hdmi switch...

  can someone help me with this please...

  When there is a cable, it's a two pins on the graphics card, usually along the top, from one to three pins on the BDM, a SPDif header. They are a type of connector molex.

  See you soon,.

• Help, please! Remove the audio only pre-existing to make the new voice overs.

  Greetings,

  I made a video which is an advertisement for a company. How to add subtitles, I want remove the audio from the middle of the video and then create new voice on audio. I looked through the forum and did not find any discussion on eliminating only part of an audio segment and the creation of new audio to replace what you deleted. Please let me know if you have any advice or tips. I'm serious need assistance. Thanks in advance!

  Thank you

  Reid

  Someone I messaged on another forum and provided the shortcut "command + K. Seems to work so far. Thanks for any help.

• The audio of my mixer in hearing is MUCH too low. Help please

  Hi all

  I started my trip in the recording of podcasts and hearing, that's what I always use to work with the audio, and I intend to continue my adventure of podcasting. However, when you make records, I've known some frustration with the low entry levels I have seem to be and I am not competent enough to correct the problem. I'm sure it's something simple. Here is my configuration:

  -First of all, I run mixer Mackie FX8 Pro. When I use a microphone, it's a Heil PR40 (just acquired, I'm rather happy haha). I throw this flexibility, the ease of doing the Mix Minus audio configurations of type, etc.

  -The card is connected to my macbook pro via a 1/4 "adapter USB

  -Hearing recognized then as standard USB audio interface, and all my other controls are made by the Board of Directors, as it should

  Now my problem is that the sound is in hearing is SO low. Of course, I'm not SUPER familiar with the use of mixing tips, but I know you're not supposed to just all get like that also pick up too much noise etc. and distort things. But I mean, the waveform bars barely move. They are tiny. And when I amplify the volume, the noise becomes too loud too properly deleted in post.

  Can someone give me clues as to what I can hurt? Do I need mic inline amplifiers? Should I check the map, what should I check on the Macbook? I'm quite frustrated and you want to go about it, and I got a lot of amazing assistance from these forums, I wanted to check with you the people first.

  I thank you very much in advance for your suggestions, you can provide.

  Kyle

  Hey I just wanted to give everyone an update I solved the problem, or rather, to understand the question.

  It turns out that the Council that I use is a little power for a microphone as the Heil, so I actually get a Mic Preamp processor for my setup. When I use a different microphone like a Shure SM58, everything was fine. If this issue is resolved (after talking with support Mackie).

  Thanks for all your help.

• Help! Cannot save the audio intelligible using AP 10 Audio (Please read for more details)

  I am trying to record audio by using the Audio recording feature in Adobe Presenter 10. I'm using a USB microphone, but when I try to record, all I get is a lot of confusing noise. I tried recording using the parameters of "Mic" both "Line In", but neither yields anything intelligible (although the option of audio product line is just a little more intelligible). When I use the Mic setting and the box to "Check the input level", nothing happens to the "meter" as I read the test sentence - it seems that AP 10 does not recognize that I have even a connected microphone.

  But here, this is where it gets particularly weird... I have no problem recording beautiful acoustic clear using this same microphone when I use the function of video recording of AP 10! Certainly, this does not seem to use some sort of separate component 'Add-on', but, again, if this component can recognize my mic, why not request 'base' of Adobe Presenter? (I also have no problems to import audio files, but it is something else entirely.)

  Unfortunately, my company is not subscribe to an Adobe service contract (they are insanely expensive for what maybe once or twice a year thing) and I'm not allowed to buy a single support call (also very expensive). So, I hope that someone here might be able to help me, how I have helped so many people on similar forums in the past... I hope above all a kind of quick response, I am supposed to do the demonstration of this software to several potential buyers of this software in my organization and they are particularly interested in this specific feature piece (since they use AP to register a nickname-"podcasts" that employees can access from our Adobe server).

  Thanks in advance!

  Laura

  P.S. If it helps, I use a laptop Lenovo running Windows 7 and uses Adobe Presenter 10 with PowerPoint 2010. I use a Plantronics DSP400 USB microphone (which, as I said, works very well with the AP video recording application).

  Okay - problem solved. Here is what happened this morning...

  I started my computer cool (as I do every morning... I always stopped at night). I plugged my microphone before start PowerPoint at all. I started to PowerPoint, grew up in the presentation, I wanted to do the test recording on and you click on the folder option in the Audio section. This time, while the level control came and I talked, it was record green so I thought, "Yay - fixed problem! Not so fast... When in fact I recorded something and played again, it was still confusing and unnecessary. Then I thought: "maybe he's still looking to pick up the audio from the built-in microphone, rather than the USB microphone," so I pressed the button muting the microphone on my laptop (hardware button). I noticed presenter thingy recorder shows the mute symbol, who confirmed that he thought it was the microphone should I use (even if, in the settings, I had the USB microphone than 'active'). So I went to the control panel sound and actually disabled the microphone press the mute mic (that I had supported before) equipment to uncheck the mute. Then when I returned in the presenter and tried to save again, voila!, it actually saved my USB microphone and everything was kitties and rainbows!

  So, if someone else is the same problem and reading this thread (which is the main reason I came here to document all of this), the solution is in fact completely disable the microphone and, possibly, also make sure to connect your USB microphone before launching PowerPoint. (Not 100% sure that the second part is necessary, but it certainly cannot hurt...)

• I don't see the Audio waveform in the timeline panel. No triangle click button. Just changed pcf. Help!

  I don't see the Audio waveform in the timeline panel. No triangle click button. Just changed pcf. Help!

  I solved the problem.  It was just a matter of push lines down and creating a larger space of work for each row of the audio.  Never had this problem at the time of AVID or FCP.  I appreciate your help!

• Body 5.03 only 'imports' half of the audio while mts compliant file... need help ASAP please

  Hello, it's never happened before: computer hp laptop dv4, card ati graphics, dual-core 2.3 ghz, 8 GB of ram, the mts files camera canon avchd, windows 7 64 bit, maudio profire610 asio driver and interface

  6 files play fine in vlc player and zoom, but body 5.03 imports only half of the audio, while meeting each file

  I do not touch anything until the files are actually

  I started new projects after clearing the cache and preferences and media file cache

  I'm a complete lost... someone can help please

  I built all kinds of things on this laptop with premium production 5.03 and never had a problem with images...

  Thanks in advance, d

  Also the vlc player and zoom are there any other .mts file players out there?

  The specifications of this laptop are far from edit the AVCHD material, only a dual core, AMD, very little graphics memory and a slow disk configuration, I guess than the minimum.  With the resolution of the screen, it does even not meet the minimum requirements for Adobe. The single drive 5400 RPM is less than the minimum needs, in short, it means underspecced for your editing needs.