Multiple administrators with different access

Similar Questions

• Playback of multiple files with different file extensions

  Hi all

  Is there a way where we can read multiple files with different file extensions using file adapter?

  
  
  < property name = value=".*\.csv"IncludeFiles"/ >
  

  Can include us a few models more file in the property above? Please let me know

  Yes you can. .

  But here, the thing you need to do is all these files must have the same format (XSD)

  You can dynamically pass the name of the file to invoke the activity of the file that is the property of jca.file.filename

  The value given when you set up the adapter will be written by this value. .

  Hope this will help you

  If this is not the case, let me know. .

  Thank you & best regards

  Sharath Kumar

• How can I send docs to multiple signatories with different addresses on sign of Echo?

  How can I send docs to multiple signatories with different addresses on sign of Echo?

  Hello

  In EchoSign, you simply have to add e-mail addresses to each signatory in the box 'To' and set the saved order. If you have to close, you must enter your last e-mail address and check the box "I need to sign. The shape that you send must have signature of blocks for each signatory but apart from that, there are other special rules or the necessary implementation. If you continue to experience problems try this, detail your problem here and I'll do what I can to help.

  See you soon!

  EchoSign-Rob!

• The ipad pro supports multiple monitors with different content on each screen?

  I want to replace my laptop with an ipad pro.  Currently I drive three screens with my laptop, all with different content (VGA, HDMI, laptop screen) with no additional adapters.  The Ipad pro has a video card that will allow me to run multiple monitors (3 including the pro) with different content on each monitor?

  Given that the pro iPad running iOS and iOS do not supports multiple monitors, I would say no. I may be wrong, so feel free to correct me.

• How to watermark multiple images with different dimensions in Photoshop?

  Is there a way I can place a watermark on the bottom right of the multiple images, any size images? I tried to use Photoshop Scripts > image processor, but it only works for images of the same size. I want to put the watermark on multiple images of different sizes. It is the output I got.

  For the first image watermark placed properly, but for the second picture watermark is distracted. As you can clearly see the dimensions are different. Please suggest me a solution.

  

  

  As this video should help you.

  How to watermark multiple images in Photoshop CS6 - YouTube

• Firefox 4.0 than flash menus as a key on the keyboard is pressed. Can not access even with all the plugins turned off. Same issue on multiple machines with different versions of Windows. How this can be solved?

  FF 4.0. Flash menus such as a key is maintain pressed making it inaccessible. The problem persists with all the plugin disabled. Firefox box top left appears. The old logo FF show instead.

  Fact to uncheck use hardware acceleration helps in the Firefox menu > options then in the window of Options - Advanced tab > uncheck the box 'use hardware acceleration when available' stop the problem does not happen.

  Advanced panel - accessibility, navigation, network, updates, and other advanced settings in Firefox

• Pools of multiple connections with different s the same database schema

  Hello team,

  I have a requirement where in a single multiple schema s database are here. A schema contains old data and another schema contains data of this year. I must get in the RPD.

  A lot of tables in the schema, so before I start working I have a question, can we have several s schema with the pool of connections for each under a single database? If Yes, I would be grateful if someone can keep an image of him how he appears in the RPD. I use 11.1.1.6. Thanks in advance.

  Thank you

  SR

  I have a requirement where in a single multiple schema s database are here. A schema contains old data and another schema contains data of this year. I must get in the RPD.

  A lot of tables in the schema, so before I start working I have a question, can we have several s schema with the pool of connections for each under a single database? If Yes, I would be grateful if someone can keep an image of him how he appears in the RPD. I use 11.1.1.6. Thanks in advance.

  Create a database user has access SELECT through patterns. Then, use a Pool of single login with this user id and check the box to fully qualify table names, so that when the SQL generated it precede patterns correctly. You can create patterns according to the needs, and it will work fine.

• Multiple subtitles with different audio

  Hello

  I have several buttons on a slide that each play different audio when clicked.

  Is there a way I can add subtitles coded for each of them separately?

  Thank you

  Mandy

  If your condition is to allow to the learner to play a number of different audio with transcription of the text of the voice-over of support there is a much easier method to achieve this result.

  Just add rollover captions and add audio clips to the part of the legend of the object.  Add the transcription of the audio clip as the text in the legend.  Then when places of the learner their mouse over the button that is animated hit the region, the legend is displayed, the audio clip will play, and the learner can show the transcript in the legend.  As soon as they move their mouse out of the affected area the clip stops.

• I can't generate multiple signals with different phases.

  Hello community!

  I created a simple signal generator versatile (see Signal "Generator.vi"). When I try to put two of these generators in the same VI ("testbed non working.vi"), I'm not able to independently change the phase of the two signals. Only one of the two phase buttons actually modifies the two signals, while it has no effect.

  However if I copy and paste the exact schema even twice in the same VI, rather then import VI Builder, everything works fine ("Test Bench working.vi").

  It seems to me that the two generators are sharing anything other than the phase variable. I'm new to LabView and I can't understand what is happening and how to fix it. Can you please help me understand?

  Thank you very much

  Hello

  This is because multiple instances of the basic vi function generator will work regardless - they share information.

  To fix this one true constant wire to signal to reset the basic vi function generator enter your generator of signals vi.

  Best regards

  Florian

• How to structure the DMA buffer for SMU 6341 DAQ card for analog output with different frequencies on each channel

  I use the outgoing/incoming analog DDK with the DAQ 6341 SMU map.

  The examples, for example aoex5, show a single timer (method outTimerHelper::loadUI), but the example shows the DMA loaded with same size of vector data.

  There is a comment in the outTimerHelper:call rogramUpdateCount, which implies that memory sizes different pad per channel can be used.

  (the comment is: switching between the sizes of the various buffers is not used)

  Nobody knows what should be the format the DMA buffer for data from multiple channels with different frequencies?

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  Hello Kenstern,

  Data are always intertwined since each card has only a single timing for each subsystem engine.

  To AO, you must specify the number of samples that will be released to the AO. You also specify the number of channels. Because he didn't is that a single engine timing for AO, each AO will be channel will be updated at the same time to update clock tick. Data will be interlaced exactly as shown in the example because each channel AO needs output at each tick of the clock to update. The data itself can change depending on the frequency you want to copy.

  kenstern wrote:

  For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz.  What looks like the DMA buffer?

  With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?

  In your example, you must come with an update rate that works for the two waveforms (sine waves of 1 and 1.5 KHz). To get a good representation of a sine wave, you need to update more than 10 x faster than your fastest frequency... I would recommend x 100 if possible.

  Update frequency: 150 KHz

  Channels: 2

  Then create you stamps that include complete cycles of each wave you want to produce based on the frequency of update. These buffers must also be of the same size.

  Buffer 1: Contains data for the sine wave of 1 KHz, 300 points 2 cycles of sine wave

  Buffer 2: Contains data for the sine wave of 1.5 KHz, 300 points, 3 cycles of sine wave

  You can Interleave them as before. When the data are performed through the ADC, they are out different sine waves, even if the AO channels are updated at the same speed.

• Can Adobe Muse cause editors of numerator of a website with restricted access levels?

  Can Muse of ADobe cause several editors of a website with restricted access levels?

  Hi Cindyw73540197,

  Unfortunately the Muse do not support collaborative environment at this point of time.

  I advise you to post this as an idea on the page of the idea of the Muse. More voice to an idea increases its chances to be included in future versions. Ideas for features in Adobe Muse

  Note: If your site is hosted on BusinessCatalyst then you can create users with different access to change online.

  Kind regards

  Vivek

• How to set up multiple LIVE IDS prod certificates on Sharepoint 2010 single server runs several Sharepoint Sites with different domain on port 443?

  Hello

  I integrated LIVE ID with Sharepoint 2010 and got the same compliance.

  In sharepoint server 2010, several sharepoint sites are run under port 443 with different domain names.

  I configured 1 LIVE ID certificate for one of our sharepoint sites would like to know can I use the same certificate for other sites too or I need to install other certificates LIVE ID to access other sites.

  How can I get prod LIVE ID certificates are available for free as nexus offers two certificates INT and PROD (x 509 certificate) or do I need to buy.

  If I need to buy where can I buy it go?

  Hi ppdremsadm,
   

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums as it is related to the configuration of Live ID in Sharepoint 2010. It should be better in the Forums of Windows Sharepoint.

  Please ask your question in products and technology SharePoint forums to improve assistance in this regard.

• Stock of access with different Adobe ID without messing with my system ID

  Outside the use of other libraries stock, I sometimes used a Dollar Photo - who bought Adobe.

  Photo of a Dollar has always been a good resource for small editorial due to its price-point - discussion for another day...

  Now that he's under the banner of Adobe, I have a problem of access to the services.

  I created a separate "floating" adobe ID and cloud-account for a member of the team to a short-term contractor access to tools such as being an account that everyone in the company can use to access stock-guarantee. Makes it easy to control stock-spending and control.

  I cannot use this account on my workstation, since it conflicts with my Adobe ID, connect, then Photoshop does not work, ask me to activate again...

  Adobe stock is so useless to me unless I'm willing to go through it and use the demo files, connect different system, buy and send to myself.

  How can I use it in a team setting where different members of the team with their own ID Adobe needs to access the stock market with the id of 'General' or 'shared' as we do with other actions-sites that we use.

  Well, you can access an account created with a single ID when the account is created with a different code. It's like access to Facebook or any other site that requires authentication with different accounts.

  Having said that you do not have a few other options. You just have to identify you on the site Web of Adobe Stock with the ID that you have set up with actions. You don't have to log out of your Adobe applications. Once in Stock you can allow the images and save them in a library. Simply share this library with your main account and you will have access to them. You can share this library with as many people that you have in your company. No additional connection or deactivation and activation required. And no need to use two computers.

  Another option is to Stock for the teams. If you are using a fair share of images among other members of your team or your staff, maybe it's even a better road.

  But using libraries (essentially the same as light boxes on other sites) you should easily be able to do what you need without having to change computers.

  Hope that helps. If this is not the case, can you explain further your workflow and maybe I can be able to offer another solution for you.

• Photos of virtual machines with multiple disks on different LUNS - Question

  I have some questions on how to manage the snapshots of virtual machines with multiple disks on different LUNS.  First of all, the LUNS are VMFS.  We are just starting to add virtual machines with dedicated for data storage format VMFS LUNS.  I don't think an extra space must be made for snapshots, as well as at least 100 GB LUN is required to store the data, and then say, add about 25 to 50% of this amount?  Set the 100 GB vmdk file but have the GB from 25 to 50 additional disk space for snapshots, if necessary (rather than just to get a unit number logic needed 100 GB of data and devote all of the 100 GB to the vmdk file).  In addition, if a virtual machine has several files vmdk on different LUNS, which will be a problem to take a snapshot, and is it possible to do just a snapshot of a disk of a virtual computer (as the volume of the BONE)?

  Thanks for any help.

  Snapshot files are created in the home folder of the VM by default for all virtual disks, no matter on what data store they are. You must make sure you have enough free disk space on the data store for snapshots.

  If you want to exclude a virtual disks of taking snapshots, you can set it to 'Independent' - 'Persistent' machine virtual settings to the HARD drive.

  André

• Different users accessing the data with different rights

  Hello
  I just started with Oracle and I don't know if
  This is the right way for what I was intending.
  
  I want to allow access to the data (tables, views,...) to different users with different rights.
  For example a user with select only the rights and another with select and insert rights.
  
  Database Oracle 10 g Express Edition is.
  
  Here are the steps I did:
  
  -This user will be allowed to select only
  create user UserSelectOnly...;
  
  -This user will have select and insert privileges
  create user UserSelectAndInsert...;
  
  -This user only contains data
  create user BaseDB...;
  
  -creation of test in BaseDB data
  create the table tdTest (...);
  
  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;
  
  -granting SELECT privilege for RoleSelectOnly
  Grant select on tdTest to RoleSelectOnly;
  
  -select grant (role) to the user UserSelectOnly
  grant RoleSelectOnly to UserSelectOnly;
  
  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;
  
  -grant select and insert privilege for RoleSelectAndInsert
  Grant select, insert on tdTest to RoleSelectAndInsert;
  
  -grant select and insert (role) to the user UserSelectAndInsert
  grant RoleSelectAndInsert to UserSelectAndInsert;
  
  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?
  
  Thank you
  Wilfried

  Hello Wilfried and welcome to the forum.

  First of all, it's a property that you have given time to review the security of the database.

  My immediate comments:

  You have 3 users:

  -This user only contains data
  create user BaseDB...;

  Very well, good thing. Use an administrative account/data owner.
  You might consider locking when you do not have administrative tasks in the schema.

  -This user will be allowed to select only
  create user UserSelectOnly...;

  -This user will have select and insert privileges
  create user UserSelectAndInsert...;

  OK, but no need to take account of their privileges in the names. You could simply call their

  SomeUser
  AnotherUser

  You have two roles

  -definition of role in BaseDB for right to select
  create the role RoleSelectOnly;

  -definition of role in BaseDB to select and insert privileges
  create the role RoleSelectAndInsert;

  Seems ok, it's a good thing here for the description of privileges in the role itself.

  Maybe I would call them something like
  RoleSelect or RoleRead or BaseDBSelectRole
  RoleInsert or RoleWrite or BaseDBUpdateRole

  Should be updated (and DELETE), as well?

  Another approach would be to separate between the tables.

  For a group of tables, select, insert, update, delete are granted to a role.

  For another group of tables, different privileges are granted to another role.

  That is, there is no general answer, correct, it depends on your application.

  Often the roles are used for ease of maintenance. In other words, if you have several users who need
  the same set of privilege, these are maintained by a role.

  Maybe you don't want to use roles, but I like them.
  But attention not only

  Select on all tables to a single role
  Insert on every table to another role
  Update on all tables to a third party role.

  Unless, of course, it gives meaning to your scenario.

  My problem is that the definition of user (BaseDB) works as a database.
  Are there more effective ways in Oracle 10 g Express?

  Not sure what you mean. Schema in Oracle and user are often used for the same thing.

  In your case, BaseDB is the owner of (all) the tables, no problem.
  As mentioned, you might choose to block the account.

  The main thing is, no application, or ad-hoc user should log in as BaseDB

  And the users of your system should be exactly the privileges they need to do their jobs
  nothing more, nothing less.

  Concerning
  Peter