multiple device management

Similar Questions

• Remove multiple monitors. __Laptop with Docking stations shows 6 monitors in Device Manager

  HP Tablet

  HP Docking Station with HP monitor.

  Windows 7 Ultimate

  The Manager of peripherals and devices and printers display 3 laptop screens and 3 monitors of the docking station.

  I deleted the additional monitors in the Deviices and printers and their drivers listed in Device Manager.

  But on reboot Windows 7 shows 6 monitors again!

  If these 'extra' monitor entries don't cause problems, leave them alone.  It's pilots that will always place them when you remove them.

• Laptop HP 15-R204NE: cannot open Device Manager?

  Hello

  I'm having the following problem when I try to open the Device Manager:

  

  He asked the permission of the Microsoft Management Console before giving me this message.

  This started happening after I installed and uninstalled multiple copies of Visual Studio and MS Office, because I had problems. My laptop is passed to control drive C before starting to check for errors and repair them.

  Can someone provide a fix for the problem please?

  I highly appreciate the help.

  Kind regards.

  The extent of the corruption of files on your system may be beyond any simple diagnosis and repair.

  I think your only option now is the restoration of the system, a repair or re - install. Restoration of the system from an earlier date is easier, even if you indicated that you do not want to. If you do not have the support of HP Recovery then your Windows recovery options are explained here:

  https://support.Microsoft.com/en-us/help/12415/Windows-10-recovery-options

• 6602 not detected measurement and Automation Explorer or Windows 7 Device Manager

  I have a PCI-6602, in a PC that is running windows 7 Home premium and it appearing not not in the Device Manager and as a result measurement and Automation Explorer.  What is strange, is that I don't see either the PCIe-6535.

  Hey M,

  Unfortunately if the windows Device Manager is unable to see the devices on multiple computers, it certainly points to the cards being broken.  I recommend you head over to http://www.ni.com/support/ and create a Service request to begin the process of repair for these devices.

• Device Manager see the some articles several times

  Device Manager displays multiple instances of the same device.  This is supposed to happen, and if they are unique, how can I say to the other?   Here is a list of some of the features that appear more than once in the Device Manager

  Batteries
  Battery (2) compatible ACPI Microsoft control method

  Human Interface devices
  Device (2) compatible HID
  USB Interface human Device (2)

  Keyboards

  Device (2) keyboard HID

  Monitors
  Default Monitor (2)
  Plug and Play Monitor (2)

  Storage volumes
  Generic volume (2)

  System devices
  ACPI Fan (5)
  Bridge (6) CPU, PCI standard host
  PCI standard PCI to PCI bridge (6)

  USB bus controllers
  Standard enhanced PCI to USB Host Controller (2)
  Controller (5) standard OpenHCD USB host
  Device (2) Composite USB
  Device (2) USB mass storage
  Hub (7) root USB

  In the category of "audio, video, and game controllers",WsAudio_DeviceSappears 5 times but each item is numbered from 1 to 5 (number in brackets at the end of the description of the object, e.g. WsAudio_Devices (1), WsAudio_Devices (2), WsAudio_Devices (3), etc..)  List of several elements in this way makes sense to me even.  I am able to see, immediately, the system distinguishes 5 unique pieces and that they are clearly not duplicates.  If the other points listed several times were also numbered as the WsAudio_DeviceS are, I wouldn't ask this question.

  Thanks for any idea that you can offer,

  Dan

  Hi danno2cu2,

  · Do you remember any changes made on your computer before the show?

  · What is the devices that are listed in several instances of work?

  · Are there error codes listed in the Device Manager?

  This can be a reason of the ghost devices that were previously installed and that can be displayed or also if the installation of the device has failed previously.

  You can have a look on the links of shot.

  Links: Understanding Device Manager:http://technet.microsoft.com/en-us/library/cc750187.aspx

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/48542061-4AAA-4d91-BBAC-3c095e269ee7/

  With regard to:

  Samhrutha G S-Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My usb port does not work. Device Manager says he has a "code 10".

  My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

  It has a USB port in the back & it does not work!

  In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

  What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

  The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

  It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

  Help, please. Thank you.

  Hi SnarFoo,

  Method1

  The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  See the article and check if that helps.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2

  If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Com and Lpt ports not in Device Manager

  I have not "Ports" option appears in Device Manager in Windows 7.  I have an internal modem and I am trying to attach my blackberry, and there is no port - Com or Lpt.  It's just not there.  Any ideas?

  Hi emstaples,

  1. check if the device is hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

  2. check in the BIOS (embedded devices) if the com ports are enabled and set to "auto".

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  3. If the steps above does not resolve, then you will need to install the driver manually.

  Link: Installing new hardware: recommended links: http://windows.microsoft.com/en-us/windows7/Installing-new-hardware-recommended-links

  Another link, you can check: http://windows.microsoft.com/en-US/windows7/Install-or-remove-a-modem

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• device management

  I can't find my management of devices please help me as soon as possible

  Please explain.

  What is your "Device management"?

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• Windows 10 - PC recognize iPad, but iTunes does not. Nothing appears in the Device Manager.

  I followed each step that I could find on the Apple Web site. The PC recognizes the iPad iPad wonder to trust the PC and I do it, but iTunes does not show the iPad and the Device Manager doesn't show anything Apple. I even uninstalled, to alreay redownloaded and reinstalled iTunes.

  Have you tried to remove and reinstall iTunes by following the steps here? All the steps are essential to eliminate corrupt drivers:

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

• Dc7700 computer. Error COmmunication Simple PCI controller in the Device Manager there is an error.

  Just installed Windows 7 64-bit.

  Simple properties Communications controller PCI hardware ID is

  PCI\VEN_8086 & DEV_2994 & subsys_2802103C & REV_02

  PCI\VEN_8086 & DEV_2994 & subsys_2802103c

  PCI\VEN_8086 & DEV_2994 & cc_078000

  PCI\VEN_8086 & DEV_2994 & cc_0780

  ...

  What can I install to get rid of this warning on my dc7700 computer.

  The simplest method would be to disable it in Device Manager.

  This device is the plain old telephone modem (POTS). Most of the people do not have to do this. If you need it below, this sentence

  The drivers are available here. Select your version of Windows 7, download the driver and install it.

• No list on Device Manager

  I don't get anything on my Device Manager list. I already tried this:

  1. Click Start, click run, type services.msc and click OK.
  2. Double-click Plug-and-Play.
     
     If you receive a Configuration Manager message, click OK.
  3. In the Startup Type list, click Automatic, and then click OK.
  4. Services nearby.
  5. Restart the computer.

  It didn't work, I don't know any other alternative for this execution. I am trying to install a hp printer all in one and it would not show on the hp Solution Center, obviously its not detected or nothing appears in list manager of devices of all... someone help pls...

  Hi please black_angel, try the following steps. Following are the three different steps to resolve the problem... Please try one of the measures listed. Resolution: Step 1: Article from Microsoft: No. elements appear in the Device Manager list when you open it http://support.microsoft.com/kb/311504 Please note: the URL above will take you to a web site with HP no. HP does not control and is not responsible for information outside the HP Web site. Step 2: Give the patch 107: restore the Manager of devices http://www.kellys-korner-xp.com/regs_edits/devicemanagerrestore.reg please take note: the URL above will take you to a web site with HP no. HP does not control and is not responsible for information outside the HP Web site. Step 3: 1. Go to "Start", "Run" and type "regedt32" 2. Expand the "HKEY_LOCAL_MACHINE" window 3 scroll down to "SYSTEM\CurrentControlSet\Enum" 4. "Enum' selected, click Edit > > menu"permissions. " Note: At this point you will probably notice that there are no permissions on this key. 5. click on 'Add '. 6 Add the group "Everyone" and the user 'SYSTEM '. 7. Select 'All' and check 'Read' ONLY! 8 select 'SYSTEM' and check "full control". 9. click on the button "Advanced" at the bottom of the window. 10. in the Advanced window, check "reset permissions on all child objects...". "11. click 'OK' 12. In the warning window click on 'Yes' 13. HP close REGEDT32 technician

• Webcam does not appear in Device Manager

  I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

  I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

  Hello world

  I have windows 7, in the balk suggestion you type cmd

  then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

  Greetz

  Steve

• 4 "other unknown devices" in Device Manager. Windows 7 RTM 64 dv7 1450

  Just bought a computer HP dv7-1450 laptop with AMD Turion X 2 64 processors. Installed Windows 7 RTM 64 and everything seems to work except there are 4 unknown "other devices" listed in Device Manager. The 4 devices are:

  -System base unit (x 3)

  -Unknown Device (x 1)

  I have no idea what are these devices. I tried looking for drivers for chipset on the AMD and HP Web site without result. But I do not know if these are the associated chipsets. One of the devices would be the disk fall sensor hard (it does not appear in the device no matter where Manager)?

  Unfortunately on the HP site, there are not many downloads of drivers available for the 64-bit (Vista). I know that Windows 7 64 drivers won't be available until in October, but if there are not any available Vista drivers either, I expect to see all the drivers for Windows 7?

  The most important thing for me is just to know what are these "other devices" 4 and get the drivers installed.

  Thanks in advance!

  ProtectSmart Hard Drive Protection here