Multipoint video chat in the company using RTMFP network

Similar Questions

• Video choppy despite the low use of the system

  Hi all, I've upgraded my system yesterday to:

  6 core processor AMD 1055 t.

  16 GB of RAM DDR3 1333

  using My Nvidia GTX295 existing 896Mbx2

  I have a separate drive for projects and scratches, the two 7200 RPM

  My question is, when I saw a clip encoded in divx, it plays for about 1 to 2 minutes. In software mode, the CPU usage never exceeds 25% and with the active MPE, use GPU never exceeds 10%. After 1-2 minutes, the video becomes very agitated and even stall, despite the persistence of the audio. The problem is present in software and active MEPS.

  If suspend you the preview and wait for 10 seconds, this will allow another 5 seconds fluid video until it be ground moved back. I am baffled by the present, as system resources seem not taxed. I'm not sure how to measure if my hard drives are the bottleneck.

  Can someone please help me solve this problem? , I created this system for my wife, who is excited to learn Premiere Pro. I understand that I should buy an Intel I7, but my budget unfortunately did not respond to this.

  Thank you

  Adam

  Adam,

  In addition to Randall's remarks, there is another thing to consider, only two disks.

  You have three weaknesses in your system:

  1. the Phenom CPU, that lack of support of SSE 4.1 +

  2. the GTX 295, which serves only to 50% of its capacity

  3. only two disks.

  The combination of these three factors can easily lead to it be ground that you meet. In addition, insufficient adjustment can make the problem worse. Have you checked Adobe Forums: installation and adjustment of a Vista... Guide which also applies to Win7.

• Progressive profiling on website of the company using the cloud connector

  We would like to start building a progressive profiling on our companies website and I wanted to see if its possible for us to use a form created in Eloqua using progressive profiling cloud connector to do this? I'm not sure if this feature works when you put a form on the Web site of our society rather than using a landing in Eloqua page.

  Did anyone else with progressive profiling their companies outside Eloqua Web site? If so, how it was handled?

  Thanks in advance.

  Hi Robert,.

  This can be done - you can also find these son deserves to be read for some ideas:

  http://topliners.Eloqua.com/thread/2842

  More advanced:

  http://topliners.Eloqua.com/community/do_it/blog/2011/08/03/progress-Pro--JavaScript-for-advanced-progressive-profiling-in-Eloqua-10

• Impossible to reach the website of the company using ad 2012 R2 as DNS primary server

  Hello

  My system was working well all these days. But now, we've had trouble where the ping / tracert / nslookup are omitted when my static IP list is configured with DNS primary and the local server that is running in 2012 R2. All this basic network troubleshooting was performed in ad server itself which in this case is also in DRC * DNS.

  It is true that with a particular from now Web site which unfortunately was our own site and who also, to the one of our branch.

  But other branches with almost similar set up and devices, it is accessible.

  Please guide me how to troubleshoot and get out.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• question about data transfer from the computer using LAN network Analyzer

  Hello. I had a problem.

  I download the driver of instruments and settings S measured by the Rohde & Schwarz site.

  When I started using the measure, the error in the parser to network RSZVB-14 shows that

  «Distance error:-222, "data out of reach,: FREQTAR1»»

  In labview, had not any waveform.

  Need your help.

  Zinou

  Hello

  If you use RSZVB-14, it has frequency range 10 MHz - 14 GHz. example was written for models that start by 300 kHz.

  Just change the Start frequency to 10 MHz

  See you soon,.

  Milo

• Google Voice video Chat installed but does not appear on the video chat

  GOOGLE VOICE CHAT VIDEO INSTALLED BUT CAN NOT SHOWN IN VIDEO CHAT! THE GOOGLE TALK CAN'T RUN?

  I AM RUNNING WINDOWS 7, 64 BIT. This problem is only on windows 7, 64 bit on 32 bit problem no!...
  Mo.

  Hello

  Welcome to the Microsoft community!

  I would like the season go the following information.

  You can refer to:

  On a computer voice and video chat.
  http://support.Google.com/chat/bin/answer.py?hl=en&answer=159499

  I would also ask you to contact the program support team for help!

  If you need help for Windows, let know us, we will be happy to help you!

• Microsoft LifeCam Cinema Webcam and Google Video Chat do not work together

  I installed a MS LifeCam Cinema camera to use with Google Video Chat.  I initiate a video calling the camera fires each time, and then I get a "Internet Explorer has stopped working.  A problem caused the blocking of the program works correctly.  "Windows will close the program and the fotify you if a solution is available" error.  Then the application controls lifecam part appears, but no camera.  And then Google closed and reopens - never proceed with the connection of video chat.  The camera works fine with the software installed locally and on Live MS aps.  Any ideas?

  Hi DigForHelp

  You can check this link for more information to solve the video messaging problems that occur when you use your LifeCam with Gmail

  http://support.Microsoft.com/kb/969275

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems on lifecam cinema courses video chat

  Recently, I had some weird problems with my lifecam cinema. When I video chat with a friend using Skype or other software, at first the cat everything works perfectly well, but the webcam still stops working after a few minutes (I can't find the device in the Skype settings, the light on the webcam of turns off), and then it will restore to normal. This situation occurs that when I video chat, if I use just audio chat there is no problem. I have all my software lifecam upgrade to the most recent and I tried to reinstall the drivers as well but the problem remains.

  Hey Hong.

  Please check the event logs display of error messages followed when the unit stops working in Skype and other video chat programs.

  See http://windows.microsoft.com/en-in/windows7/open-event-viewer to open Event Viewer and check the logs.

  Provide us the error report detailed if you find with Skype / other programs and the LifeCam cinema camera.

  See http://support.microsoft.com/kb/2262196 to be able to use Skype with the LifeCam cinema.

  Here are some general troubleshooting steps for Webcam problems.

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  You can also connect to another computer, and then check if the problem persists when you use Skype and other video chat programs.

• BlackBerry playbook with z10 Z10 video chat

  Hi guys,.

  Do you know the way to add playbook in z10 for video chat. I have z10 and playbook. I tried chaton playbook to z10 and it worked fine but when I tried to add pin playbook in z10 right after that I can not do video chat of the playbook. Can help you with this please?

  Bilal

  Arsen salvation,

  Thank you for your kind reply.

  What do you think if I create new blackberry ID for my Z10 instead I change for playbook? I think it would work this way too?

  See you soon,.

  Bilal

• Unable to connect to the chat server using ICUII video Chat v8.

  Original title: ICUII video Chat 8

  I downloaded ICUII cat worm 8, but I can't seem to connect to a chat server

  Hello

  Have you been able to connect to the chat server earlier?

  Step 1: Check if the program is compatible with Windows 7. You can check the compatibility of the major part of the hardware and software with Windows 7 on the following Web site.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Step 2: I suggest you to uninstall and reinstall the software and check if the problem persists. Check out the following link to uninstall the program, programs and features.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  If the problem persists then, I'd say contact the software support on the issue.

• iPhone download videos in real time with the company data?

  How to set up my iPhone 5 to download videos in real time on my iCloud account using the data of the company (and WiFi, too)?

  Alexander.Carpenter wrote:

  How to set up my iPhone 5 to download videos in real time on my iCloud account using the data of the company (and WiFi, too)?

  iCloud photo library - Apple Support only works when the two is connected to wifi, no cellular data.

  Read here's how it works.

• using firefox, I can video chat w / anyone using safari?

  using firefox, I can video chat w / anyone using safari?

  Hello boyo13, Hello firefox will work with all browsers and platforms that support the web - real time communication, which is a standardization being open protocol. at the moment it is supported in chrome, opera and firefox - but not safari and internet explore unfortunately.

  http://caniuse.com/#feat=rtcpeerconnection
  http://www.webrtc.org/

• When I am on messenger I continues to disconnect and I can't video chat. I can see the person, but the person cannot see me.

  as I have said, I continue to disconnect from windows Messenger and video chat does not work. I can see the person and they can't see me.

  Hello

  ·         You get the error message?

  ·         What version of windows messenger do you use?

  ·         Have you updated the drivers for your sound card, video card or Web camera?

  ·         Have you tried to add your webcam to the conversation, adding audio?

  ·         What kind of camera do you have to Web?

  ·         This problem occurs with just a touch or all contacts? »

  Step 1: Check the video configuration in windows messenger.

  (a) start Windows Live Messenger and sign in.

  (b) prior to connect to anyone, open the menu "Tools" then click on "Configuration video / Audio.

  (c) perform the tests and click on 'next' and confirm the webcam is the video display and then click "Finish."

  (d) prior to connect to anyone, open the menu 'Tools' and then click 'Options '.

  (e) select "Personal" and put a check mark next to "Webcam - enable others to see that I have a webcam".

  (f) click on 'Apply' and then click 'Ok '.

  (g) sign out and completely EXIT Windows Live Messenger to save the new settings.

  Step 2: temporarily disable the security software and check if it works.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If this does not work, I suggest you to visit the following site to get help.

  http://windowslivehelp.com/forums.aspx?ForumID=568c1adc-41d2-47E0-BB2C-cdfedd9642ef

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Collection BC 19 when using Yahoo messenger video chat

  Which would cause an error in Code BC 19 using the function of video chat in Yahoo Messenger 10?  This file appears in the error message, C:/windows/minidump/mini060510-01.dmp.  I uninstalled and reinstalled Yahoo Messenger 10 and do not believe that is the problem.

  Hello Steelers10,

  If the SFC/scannow did not help with your question, then I suggest you try the following:
  I suggest you uninstall Yahoo messenger 10. Then reinstall and see if you still get the same error.
  You can download the Windows Installer Cleanup utility. Click here to download it from the link here.

  Download Yahoo Messenger from a link here. The latest version is Version 10.

  If still get errors, do you a clean boot and see if you can identify any 3rd party software that may be in conflict.
  Follow the article listed here.

  929135 KB - how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,