Muse will not charge upward, it is said to connect and then say an error has occurred.

Similar Questions

• My Windows mail keep blocking saying an error has occurred and it will reopen its doors again. It does this all the time. Can anyone help?

  A week ago when I go to the various emails in my Inbox, my mail will close and then reopen again.  It just says: an error has occurred and it starts up.  If I do not jump in my email box, it doesn't seem to happen as well but if I want to keep something an email, and then go to another, he stops.

  Try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   
  If that does not do it, delete the account, restart and it add.

• My Equium A210 will not charge upward once it lights

  Hello
  Last night my Equium A210 17I turns off during use. Despite several attempts to reboot, it just does not start. When I turn it on I get the message "Windows is loading files". This continues for a few minutes, then the following information is displayed on the screen...

  * Windows cannot start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "Next".
  3. click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or corrupt.*

  I never received an installation disc with my laptop I bought from PC World about 2 years ago. Can I buy one?

  I hope someone can help.

  Hello

  Hmm. maybe you didn t receive the recovery disk because the restore disc could be created using the preinstalled Toshiba recovery disc creator
  I guess you have never activated your user manual. I m right?

  In any case, perhaps you can order the CD from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good luck

• Wireless network adapter does not work anymore and will not be repeated work without stopping the computer and then back on.

  Sometimes I leave my computer on at night.  Sometimes I notice that when I get back to him the next day that he has limited connection to the network I use.  When I try to disconnect it from the network, then reconnect, it says that it cannot connect.  Then, when I try to restart my computer it is sitting at a screen saying "stop down". "."  My wireless network software also is unaccessable in which she does not open and if I close the Task Manager and reopen it flashes for a second then closes.

  However when I turn it on manually and then turn it on again, which apparently is not good for the computer, I am once again able to connect to the network with full access.

  Can someone please tell me why this keeps happening and how to fix it?

  original title: unable to connect to a network.

  Hello

  Are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode with networking

  Start your computer in safe mode with network and verify that the question.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode with network, then put your computer in a clean boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Update the NIC drivers and check the issue.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 3:

  Run a virus scan and make sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  I hope this helps.

• Satellite L300 will not charge upward

  Hi all

  I have a L300 ve won t open upward, I tried doing auto repair, but he gets to half way through and it freezes everything. I tried the re-boot s disk but I ve had no joy.
  Now I've taken to a computer repair shop who said that the hard drive is faulty.

  Think you guys is that correct?

  If you were not able to install the OS by using the original Toshiba Recovery DVD, it is possible that the HARD drive is faulty.
  Change the HARD drive is not complicated and you can do it alone.

  In the lower corner, you will see HDD cover. Remove and gently move HDD to the side, then you can remove it completely.
  Buy the same one, built in HARD drive caddy and put back into the laptop.
  Use the recovery again disk and install OS.

• Acrobat cc will not open. Dialog box a half loads and then he is stuck. I uninstalled and reinstalled. No help. MacBook Pro OS 10.10.5

  I have not done any updates, so I am puzzled by what has changed. Here's the opening scree I get:

  

  Any ideas?

  Thanks for your help.

  Carla

  Hello

  I recommend you to go through the following link once and see if this referred not to solve the problem for you.

  https://helpx.Adobe.com/Acrobat/KB/HighBeam-dialog-appears-distorted-in-Acrobat-DC.html

  Let us know how it goes.

  Concerning

  Sukrit diallo

• Palm Pre crazy symptoms: 'phone in offline mode', won't charge battery, won't start, message error "an error has occurred that cannot be resolved.

  This is a long description of a series of problems with my new Palm Pre. You can search text to find your specific problem. There is no solution in my post. Looking for possible answers in future responses.

  I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone was working fine. Last night I plugged the phone and updated the operating system. After, I've selected "Done" and went to bed.

  -First set of questions: 'Phone offline', will not charge battery.

  In the upper left corner of the phone, there is the message "phone offline. Although the phone was in charge all night, it reads "battery of 26%. I called the general number of on the Sprint tech support and we tried the following things:

  (1) the phone reboots (press on and hold the power button / stop, then select 'Disable'. After setting down, hold down power button / power stop.)

  (2) to reset the phone (several ways - call tech support so that you do this properly)

  The individual Sprint and then sent me to another tech support person, likely to level 2.

  -Second series of questions: message error "an error has occurred that cannot be resolved;

  #2 Sprint tech support person had me also to restart and reset the phone in a number of ways. In his own words 'we tried all the palm pre stuff I know' and whenever the phone was insensitive. Often, we received the message error "the phone is in offline mode. We did a full erase and after that the phone will not re-start is no longer. At this point, the error message came up saying "an error has occurred that cannot be resolved" that referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky with a translucent box on background with white text.

  #2 Sprint tech support person then me connected with the support of the Palm and the dance continued. Yet once, we tried a whole bunch of reset and restart and the erasure of the options. Palm support asked me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. Although that was the case he had hold the button "volume +" and connect the phone to the charger. This caused a USB symbol will appear on the phone. When the record was complete, I got an error message which could not run the file. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He me transferred to another person from Palm support that works with Mac users.

  Palm #2 tech support person advised me that I should have selected the download option 'mac' on www.palm.com/rom. I verbally walked him through the series of Web pages, telling him it is said that you need Windows (any version) or Mac (whatever version), but that at no time was there a possibility to download another WebOS doctor for different operating systems. After an exchange of views over she told me that she would have to have someone call back me tomorrow.

  -Third series of questions: phone stuck on the USB symbol.

  So for the moment, the phone is completely useless. Not fantastic. I started the mac on Windows 7 and downloaded WebOS Doc and received the same error message. I also ran Windows Vista virtually and received the same error message. Later this afternoon, I head into work to try the same thing on Windows XP.

  In the meantime, I got on this forum and found a thread that has provided a direct link to the necessary file:

  Palm.CDNetworks.net/Staging/ROM/webosdoctorp100ewwsprint.jar

  After downloading this file, I realized could totally be a virus, I was able to get WebOS Doc work on my computer. It took that I recharge the phone before, and now it's on the screen that says 'do not disconnect your phone' and the full file of 3%. Only... it was completed for almost 30 minutes to 3%.

  I hope that Palm will follow-up with me tomorrow, but I'm leaving on a business trip at 7:00 and I would love to have the thing work. All suggestions are welcome, even if you can just tell me how to get her think disconnected safely before my flight tomorrow. I want to get through security with my phone plugged into my laptop.

  Thank you.

  I picked up the phone at the local Sprint store and the sales ago replaced the phone. They were unable to understand what went wrong and, essentially, has declared a complete failure of the unit. I'm sorry that I'm not able to offer better news, but I hope that this info is useful to you.

• MP3 player is not recognized by the computer, the unit will not charge and transfer of content said to connect the unit.

  Original tile: Mp3 player will not charge

  All of a sudden when I plug my MP3 into the usb port, the computer does not recognize the device.  It will not load and transfer of content said to connect the unit and it is already plugged.  The player will load on another computer.  The mouse that is connected works very well. Help!

  Hi LaurajmWR,

  Good to know that you are able to resolve the issue and thank you for sharing the information.

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• My pencil to the iPad will not charge.  What should I do?

  My pencil iPad suddenly stopped charging.  The connector of the lightning and the wall adapter successfully charge my iPad and my iPhone 6 but will not charge my pencil.  The green light on the pencil map is no longer lights up.  The pencil is about 7-8 months.

  Hello

  Check the ports on the adapter load load pencil Apple for debris.

  Also try to load your Apple pencil by plugging in the connector of the lightning on your iPad Pro. If the battery is exhausted, a second charge of 15 should provide 30 minutes of use.

  • Use the pencil to Apple with iPad Pro - Apple Support

  If the problem persists, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to your Apple pencil and accessories checked power warranty:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Satellite battery click on Mini L9W - B keyboard will not charge

  My keyboard battery will not charge, I left it loads for more than 24 hours after the battery 1 reached 100%.

  I checked the version of the bios that is 1.70. I read the other posts on this particular issue but unfortunately nothing works for me.

  It shows the symbol of charge on battery 2, but it did not go above 0%. If I turn on the battery runs immediately battery 1.

  Please advise me on this point because otherwise I will have to return my satellite click mini. Thanks in advance

  You completely turned the device off?

  Do... Press and hold the power button / stop until the device turns off.
  In addition, you can stop the unit pressing and holding the key SHIFT and then choose SHUT OFF

  Then check the connection between the keyboard and Tablet docker... possibly disconnect and connect again.
  Once the unit turns on again and check the battery State of charge connection adapter to the device.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• My iPhone will not charge with another cable or adapter. iPhone 5. I mean this as bluntly as this can be explained. NO OTHER POWER CORD OR ADAPTER.

  my iPhone 5 will not charge with any other combination than the exact cord and adapter, I received with the phone. I tried all other options.

  Then?

  I do not understand, not the cable no longer works? Why you want to change the current mix?

• My P50-A-10U Satellite will not charge or turn on

  The laptop will not charge or turn on, it's like its completely dead.
  No lights or any sign of life. It worked yesterday and now when I try and turn on, it doesn't.

  The charger also mysteriously broke today, I confirmed this by plugging in my other laptop Toshiba (C855 series) and it would not load. I tried this portable charger in my p50t, but not fires.

  I think that the motherboard may be dead, but I can't be sure.

  I also did the tour of the reset button but still no luck. Any tips?
  I don't have a multimeter and I have not guaranteed that I got on ebay.

  > I think that the motherboard may be dead, but I can't be sure.
  > I also did the tour of the reset button but still no luck. Any tips?

  Which is a shame. I guess you don t have a lot of options.
  From my point of view of a few it's necessary to know what part is faulty: part built in Notepad (motherboard, etc.) or external part (adapter).

  But even if the power adapter for laptop s would be defective, the unit should light up in case the battery is charged. In case the battery is empty, the unit will not supply.
  I think that this need to be clarified in the first step before you start checking the other parts.

  The next step should contain the check RAM and motherboard and in my opinion, only a cell phone technician would be able to perform the audit of the detailed hardware diagnostics.