My 2001 WLM disconnects

Similar Questions

• Where the fix to CIT200 disconnected message?

  My phone has recently begun to show the offline message. The phone is not simply sign in to Skype but linksys shows connected in the taskbar (in xp). I have been looking for a solution to this problem in different forums and tried everything that was possible.

  Uninstall of & re - install the software for the linksys & Skype, disconnect the base from the usb port, turn on/off the phone, signing in and out of Skype, unchecking Skype to load at startup, restart... I did not take magic or nero or half of the things that people suggest that you close in the Task Manager. It's frustrating.

  This phone is relatively old and the last link that I read was in 2007 (http://forums.linksysbycisco.com/linksys/board/message?board.id=VoIP_Phones&thread.id=1318&view=by_d...) and had over 5,000 views on this issue and people always ask the same question.

  It is so 2009. Come on, it's already the fix?

  I found that my CIT200 placed online disconnected when I started Windows Live Messenger 2009.  I uninstalled WLM 2009 and used an older version (Windows Live Messenger 8.1) and have not had any problems since then.

  I don't know of all corrective to the conflict between the current version of Windows Live Messenger (2009) and the CIT200.

• Recently, do 800ccc0f with Windows Live Mail IMAP protocol when just read AOL e-mail so I am not idle, but the server disconnected the connection!

  I have Windows 7 Edition Home Premium, 64 bit on an HP G72 laptop. About 2 or 3 weeks, I get error code 800ccc0f when looking at my AOL emails on the downloaded Windows Live Mail program.  I am not idle, as I read my emails in Inbox, but it says that the server has unexpectedly disconnected the connection. So I close the program and restart WLM but the problem happen in say 15 minutes, sometimes earlier.

  This is the IMAP protocol, with port 143 and secure SSL is 0.

  (1) what is the cause for this?

  (2) I have no virus detected by Windows Security Essentials etc.  So is it a recent Windows Update causing the problem, as kb2454826 affected WLM since January 2011? (I uninstall this update kb2454826).

  I also noticed that the problem with the same error code occurs when I delete some e-mails in my Inbox.

  So it is all awkward and Windows Mail on my last laptop Vista was better on the screen, functionality, reliability, and Outlook 2002 on my laptop XP Pro worked and looked better also. I use WLM version 11, I think.

  (3) can Microsoft Windows Mail works on Windows 7, or at least improve WLM to look and work like Windows Mail with better reliability too?

  Thanks in advance.

  SofiaS

  Hi Sofia S

  I use windows live mail version 11 and have an account to imap aol here are the settings I use.

  Right-click on your aol account and click Properties,
  Tab servers make sure that my server requires authentication is checked.

  The tab advanced,
  Mail Port SMTP outgoing # is 587
  Check this server requires a secure connection (SSL)

  Incoming IMAP mail
  Check this server requires a secure connection (SSL)

  change the server 2 or 3 minute wait times, I use 2 and that works for me.

  After clicking on apply and close the window re - open prorperties and check that mail port # 587 outgoing sometimes he stuck back to default settings.

  Hope this helps

• Windows 7 - time and date always reverts to December 31, 2001

  Whenever I start my computer (after a power down) the date and returns the wrong time and date.  The date is December 31, 2001 and the time is 11:? H. Ce that is the cause? It only started a few days ago.  What can I do to fix this?

  I'm guessing that you have a desktop computer that is old enough?

  I think that the problem is caused by a small button battery in your computer that needs to be replaced.

  1. If you you disconnect the power supply to your computer

  2. Hold the button for 7 seconds

  3. Lay the computer on its side with the side where the wires are down

  4. Remove the side panel

  5. By peer in there and you'll see a shiny silver battery about 1/2 "in diameter.  It's the battery

  6. Go into any store and buy a 2032 button battery.  They cost less than $5

  7. Find a very small screwdriver flat blade (like that used for glasses)

  8. Very gently, loose battery.  It will pop up, so be ready to grab.

  9. Press the new battery with the markings embossed on the top-side facing you.

  10. Close the side panel

  11. Replace vertical

  12. Start the computer

      He now has to have the date and time together, but once more - at least for this 5 years.  You have to press F2 at startup to get to the place where the date and time are stored.  Equip date and current time. It does not use the mouse only keyboard.  This includes the way it tells you to save what you were doing.  You can hear the ROAR more and blowing so that some things is again set up.

      Once Windows is all set up:

  1. Click once on the date/time in the lower right

  2. Click change date and time

  3. Click time Internet

  4. Click on change settings

  5. Select time.b.nist.gov and click on the Update button - it synchronizes the clock of the computer with the US govt time system labs

  6. Close

     You are all fixed.

• Constant network disconnects!

  Hello!

  I am running Windows 7 Home Premium SP1 and am using a Realtek PCIe GBE Family Controller network adapter.

  A week ago, my office started constantly disconnect my Wired internet connection. I have a local network to Verizon router connection. This problem is only proceed to my office and none of the other computers or devices on the network. I tried to fix it by about three days of research, who gave no response. I reformatted my HARD drive and reinstalled windows, which solved the problem... temporarily. Today, about five days since the reformat, the disconnection problem is back.

  Before I started to change my computer settings, my event logs showed:

  "TCP/IP NetBIOS support was sent successfully a stop command. "The given reason was: 0 x 40030011 [OS: network connectivity (planned)].

  Since then, I have disabled support TCP/IP NetBIOS, as well as the computer browser service. I also changed the settings of my network card and my SIP settings. None of these changes have solved the problem.

  I also made full reboots on my desk and the router, flushed my dns cache and released / renewed my lease. These could not solve the problem either.

  Out of curiosity, I started my computer in safe mode with network. After an hour or so to insist on the internet connection, there were no disconnects. I also ran a scan of viruses and software malware full system using Symantec Endpoint Protection, who gave no results.

  After reading some other posts on the forum, I did tests with MiniToolBox by Farbar. The results are listed below:

  ATV:

  MiniToolBox by Farbar Version: 25/07/2015 01
  Run by Ryan (Administrator) on 20/08/2015 at 17:47:51
  From the 'C:\Users\Ryan\Desktop '.
  Microsoft Windows 7 Home Premium Service Pack 1 (X 64)
  Model: MS-7816 manufacturer: MSI
  Boot Mode: Normal
  ***************************************************************************
  ========================= IP Configuration: ================================

  Realtek PCIe GBE Family Controller = connection to the LAN (connected)

  # ----------------------------------
  # IPv4 Configuration
  # ----------------------------------
  pushd interface ipv4

  reset
  the value overall icmpredirects = activated

  popd
  # End of IPv4 configuration

  Windows IP configuration

  Name of the host...: Juggernaut
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: fios - route .home

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : fios - route .home
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... : 44-8A-5B-5D-46-96
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::a430:1d2a:7c8b:705% 13 (Preferred)
  IPv4 address...: 192.168.1.170 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, August 20, 2015 15:45:39
  End of the lease...: Friday, August 21, 2015 17:47:04
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 172264027
  DHCPv6 DUID customer...: 00-01-00-01-1D-5F-B9-A5-44-8A-5B-5D-46-96
  DNS servers...: 192.168.1.1.
  NetBIOS over TCP/IP...: disabled

  Adapter isatap.fios - tunnel - route .home:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : fios - route .home
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5cf2:8c15:4c8:1 has 27: 3f57:fe55 (Preferred)
  Address IPv6 local link...: fe80::4c8:1 has 27: 3f57:fe55% 11 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled
  Server: FIOS_Quantum_Gateway.fios - route .home
  Address: 192.168.1.1

  Name: google.com
  Address: 2607:f8b0:4007:802:1008
  63.110.67.152
  63.110.67.149
  63.110.67.153
  63.110.67.150
  63.110.67.155
  63.110.67.154
  63.110.67.151
  63.110.67.148

  Ping google.com [63.110.67.151] with 32 bytes of data:
  Reply from 63.110.67.151: bytes = 32 time = 35ms TTL = 59
  Reply from 63.110.67.151: bytes = 32 time = 35ms TTL = 59

  Ping statistics for 63.110.67.151:
  Packets: Sent = 2, received = 2, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 35ms, Maximum = 35ms, average = 35ms
  Server: FIOS_Quantum_Gateway.fios - route .home
  Address: 192.168.1.1

  Name: yahoo.com
  Address: 2001:4998:c:a06:2:4008
  2001:4998:44:204:A7
  2001:4998:58:C02:A9
  206.190.36.45
  98.139.183.24
  98.138.253.109

  Ping Yao [206.190.36.45] with 32 bytes of data:
  Reply from 206.190.36.45: bytes = 32 time = 57ms TTL = 53
  Reply from 206.190.36.45: bytes = 32 time = 59ms TTL = 53

  Ping statistics for 206.190.36.45:
  Packets: Sent = 2, received = 2, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 57ms, Maximum = 59ms, average = 58ms

  Ping 127.0.0.1 with 32 bytes of data:
  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">
  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Ping statistics for 127.0.0.1:
  Packets: Sent = 2, received = 2, lost = 0 (0% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, average = 0ms
  ===========================================================================
  List of the interface
  13... a 44 8, 5 b 5 46 96 d... Realtek PCIe GBE Family Controller
  1... software Loopback Interface 1
  10.. 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
  11.. 00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.170 20
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  192.168.1.0 255.255.255.0 on a 192.168.1.170 route 276
  192.168.1.170 255.255.255.255 on a 192.168.1.170 route 276
  192.168.1.255 255.255.255.255 on a 192.168.1.170 route 276
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on a 192.168.1.170 route 276
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on a 192.168.1.170 route 276
  ===========================================================================
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  11 58: / 0 sur-lien
  1 306: 1/128 liaison
  11 58 2001: / 32 on a link
  11 2001:0:5cf2:8 306 15:4 c 8: 1a 27: 3f57:fe55 / 128
  Over a link
  13 276 fe80: / 64 On-link
  11 306 fe80: / 64 On-link
  FE80::4c8:1 has 27: 3f57:fe55 11 306 / 128
  Over a link
  FE80::A430:1d2a:7c8b:705 13 276 / 128
  Over a link
  1 306 ff00: / 8 On-link
  11 306 ff00: / 8 On-link
  13 276 ff00: / 8 On-link
  ===========================================================================
  Persistent routes:
  None

  ========================= Event log errors: ===============================

  Application errors:
  ==================
  Error: (20/08/2015 13:29:08) (Source: Symantec AntiVirus) (user :)
  Description: Symantec Endpoint Protection doesn't have to load the latest virus definitions.

  Error: (20/08/2015 13:28:58) (Source: Symantec AntiVirus) (user :)
  Description: SONAR was an error: code 0: description: failed to set

  Error: (20/08/2015 13:16:32) (Source: Symantec AntiVirus) (user :)
  Description: SONAR was an error: code 1: description: heuristic analysis or the failed to load

  Error: (20/08/2015 13:00:19) (Source: SideBySide) (user :)
  "Description: activation context generation failed for" Microsoft.Windows.Common - controls, language = "*" "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version ="6.0.0.0"1."
  Assembly Microsoft.Windows.Common - controls, language = "" * "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version = '6.0.0.0' could not be found."
  Please use sxstrace.exe for detailed diagnosis.

  Error: (20/08/2015 12:24:01) (Source: SideBySide) (user :)
  "Description: activation context generation failed for" Microsoft.Windows.Common - controls, language = "*" "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version ="6.0.0.0"1."
  Assembly Microsoft.Windows.Common - controls, language = "" * "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version = '6.0.0.0' could not be found."
  Please use sxstrace.exe for detailed diagnosis.

  Error: (20/08/2015 10:33:27) (Source: Symantec AntiVirus) (user :)
  Description: SONAR was an error: code 0: description: failed to set

  Error: (20/08/2015 10:33) (Source: Symantec AntiVirus) (user :)
  Description: Symantec Endpoint Protection has determined that the virus definitions are missing on this computer. This computer will remain unprotected against the virus, until the virus definitions are downloaded on this computer. Application has encountered an error.
  For more information, please visit: http://www.symantec.com/techsupp/servlet/ProductMessages?product=SAVCORP&version=12.1.0.0.sepe&language=english&module=1000&error=0009&build=symantec_ent

  Error: (20/08/2015 10:30:34) (Source: Symantec AntiVirus) (user :)
  Description: Symantec Endpoint Protection has determined that the virus definitions are missing on this computer. This computer will remain unprotected against the virus, until the virus definitions are downloaded on this computer. Application has encountered an error.
  For more information, please visit: http://www.symantec.com/techsupp/servlet/ProductMessages?product=SAVCORP&version=12.1.0.0.sepe&language=english&module=1000&error=0009&build=symantec_ent

  Error: (19/08/2015 13:25:28) (Source: SideBySide) (user :)
  "Description: activation context generation failed for" Microsoft.Windows.Common - controls, language = "*" "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version ="6.0.0.0"1."
  Assembly Microsoft.Windows.Common - controls, language = "" * "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version = '6.0.0.0' could not be found."
  Please use sxstrace.exe for detailed diagnosis.

  Error: (18/08/2015 17:10:15) (Source: SideBySide) (user :)
  "Description: activation context generation failed for" Microsoft.Windows.Common - controls, language = "*" "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version ="6.0.0.0"1."
  Assembly Microsoft.Windows.Common - controls, language = "" * "processorArchitecture ="arm", publicKeyToken = '6595b64144ccf1df', type is 'win32', version = '6.0.0.0' could not be found."
  Please use sxstrace.exe for detailed diagnosis.

  System errors:
  =============
  Error: (20/08/2015 15:41:54) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:41:54) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:41:54) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:39:48) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:39:48) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:39:48) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:34:48) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:34:48) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:34:48) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Error: (20/08/2015 15:33:30) (Source: Service Control Manager) (user :)
  Description: The computer browser service depends on the Server service which failed to start because of the following error:
  % 1068

  Sessions of Microsoft Office:
  =========================
  Error: (20/08/2015 13:29:08) (Source: Symantec AntiVirus)(User:))
  Description: Symantec Endpoint Protection doesn't have to load the latest virus definitions.

  Error: (20/08/2015 13:28:58) (Source: Symantec AntiVirus)(User:))
  Description: SONAR was an error: code 0: description: failed to set

  Error: (20/08/2015 13:16:32) (Source: Symantec AntiVirus)(User:))
  Description: SONAR was an error: code 1: description: heuristic analysis or the failed to load

  Error: (20/08/2015 13:00:19) (Source: SideBySide)(User:))
  Description: Microsoft.Windows.Common-Controls,language="*",processorArchitecture="arm",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"C:\Users\Ryan\Downloads\vcredist_arm.exe

  Error: (20/08/2015 12:24:01) (Source: SideBySide)(User:))
  Description: Microsoft.Windows.Common-Controls,language="*",processorArchitecture="arm",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"C:\Users\Ryan\Downloads\vcredist_arm.exe

  Error: (20/08/2015 10:33:27) (Source: Symantec AntiVirus)(User:))
  Description: SONAR was an error: code 0: description: failed to set

  Error: (20/08/2015 10:33) (Source: Symantec AntiVirus)(User:))
  Description: Symantec Endpoint Protection has determined that the virus definitions are missing on this computer. This computer will remain unprotected against the virus, until the virus definitions are downloaded on this computer. Application has encountered an error.
  For more information, please visit: http://www.symantec.com/techsupp/servlet/ProductMessages?product=SAVCORP&version=12.1.0.0.sepe&language=english&module=1000&error=0009&build=symantec_ent

  Error: (20/08/2015 10:30:34) (Source: Symantec AntiVirus)(User:))
  Description: Symantec Endpoint Protection has determined that the virus definitions are missing on this computer. This computer will remain unprotected against the virus, until the virus definitions are downloaded on this computer. Application has encountered an error.
  For more information, please visit: http://www.symantec.com/techsupp/servlet/ProductMessages?product=SAVCORP&version=12.1.0.0.sepe&language=english&module=1000&error=0009&build=symantec_ent

  Error: (19/08/2015 13:25:28) (Source: SideBySide)(User:))
  Description: Microsoft.Windows.Common-Controls,language="*",processorArchitecture="arm",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"C:\Users\Ryan\Downloads\vcredist_arm.exe

  Error: (18/08/2015 17:10:15) (Source: SideBySide)(User:))
  Description: Microsoft.Windows.Common-Controls,language="*",processorArchitecture="arm",publicKeyToken="6595b64144ccf1df",type="win32",version="6.0.0.0"C:\Users\Ryan\Downloads\vcredist_arm.exe

  CodeIntegrity errors:
  ===================================
  Date: 18-08-2015 17:52:27.808
  Description: Windows cannot verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\x86_microsoft-windows-errorreportingcore_31bf3856ad364e35_10.0.10074.1_none_47662a2706182d6f\wermgr.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 18-08-2015 17:52:27.805
  Description: Windows cannot verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\x86_microsoft-windows-errorreportingcore_31bf3856ad364e35_10.0.10074.1_none_47662a2706182d6f\wermgr.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 18-08-2015 17:52:27.748
  Description: Windows cannot verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\amd64_microsoft-windows-errorreportingcore_31bf3856ad364e35_10.0.10074.1_none_a384c5aabe759ea5\wermgr.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 18-08-2015 17:52:27.746
  Description: Windows cannot verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\amd64_microsoft-windows-errorreportingcore_31bf3856ad364e35_10.0.10074.1_none_a384c5aabe759ea5\wermgr.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 18-08-2015 17:52:27.676
  Description: Windows is unable to verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\amd64_microsoft-windows-errorreportingfaults_31bf3856ad364e35_10.0.10074.1_none_f3153036f55ab3f5\werfault.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 18-08-2015 17:52:27.673
  Description: Windows is unable to verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\amd64_microsoft-windows-errorreportingfaults_31bf3856ad364e35_10.0.10074.1_none_f3153036f55ab3f5\werfault.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 18-08-2015 17:52:27.624
  Description: Windows cannot verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\x86_microsoft-windows-errorreportingfaults_31bf3856ad364e35_10.0.10074.1_none_96f694b33cfd42bf\werfault.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 18-08-2015 17:52:27.621
  Description: Windows cannot verify the integrity of the file \Device\HarddiskVolume2\$Windows.~BT\Updates\Critical\8e08ca47-f6ba-409d-82de-698e324c0004\x86_microsoft-windows-errorreportingfaults_31bf3856ad364e35_10.0.10074.1_none_96f694b33cfd42bf\werfault.exe because the signing certificate has been revoked.  Check with the Publisher to see if has signed a new version of the kernel module is available.

  Date: 17-08-2015 13:48:27.078
  Description: Code integrity cannot verify the integrity of the image of the file \Device\HarddiskVolume2\Windows.old\Windows\winsxs\wow64_microsoft-windows-appid_31bf3856ad364e35_6.1.7601.23040_none_c02bb2f816616adb\appidapi.dll because all of the image per page hashes is not found on the system.

  Date: 17-08-2015 13:48:27.043
  Description: Code integrity cannot verify the integrity of the image of the file \Device\HarddiskVolume2\Windows.old\Windows\winsxs\wow64_microsoft-windows-appid_31bf3856ad364e35_6.1.7601.23040_none_c02bb2f816616adb\appidapi.dll because all of the image per page hashes is not found on the system.

  = Programs installed =.

  Armored war MyCom Beta (HKCU\...\Armored Warfare MyCom Beta) (Version: 1.25 - My.com B.V.)
  CCleaner (HKLM\...\CCleaner) (Version: 5.08 - Piriform)
  Google Chrome (chromium HKLM-x32\...\Google) (Version: 44.0.2403.155 - Google Inc.)
  Update Google Helper (HKLM-x32\...\{60EC980A-BDA2-4CB6-A427-B07A5498B4CA)} (Version: 1.3.28.5 - Google Inc.) Hidden
  HP Photosmart 5520 series based Device Software (HKLM\...\{68C0736C-3E47-43A6-B14D-236BEF198A5F)} (Version: 28.0.1315.0 - Hewlett-Packard Co.)
  HP Support Solutions Framework (HKLM-x32\...\{F6A11738-3EE4-4573-AEA5-6CD5D491C167)} (Version: 12.0.30.81 - Hewlett-Packard Company)
  Microsoft .NET Framework 4.5.2 (HKLM\...\{92FB6C44-E685-45AD-9B20-CADF4CABA132} - 1033) (Version: 4.5.51209 - Microsoft Corporation)
  {Microsoft Visual C++ Redistributable (x 64) 2013 - 12.0.30501 (HKLM-x32\...\{050d4fc8-5d48-4b8f-8972-47c82c46020f)} (Version: 12.0.30501.0 - Microsoft Corporation)
  {Microsoft Visual C++ Redistributable (x 86) 2013 - 12.0.30501 (HKLM-x32\...\{f65db027-aff3-4070-886a-0d87064aabb1)} (Version: 12.0.30501.0 - Microsoft Corporation)
  {Mumble 1.2.10 (HKLM-x32\...\{63243F5C-E941-4461-A4B0-2689A9A3BF13)} (Version: 1.2.10 - Thorvald Natvig)
  My.com Game Center (HKCU\...\MyComGames) (Version: 3.140 - My.com B.V.)
  NVIDIA 3D Vision Controller Driver 352.65 (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_Display.NVIRUSB) (Version: 352.65 - NVIDIA Corporation)
  NVIDIA 3D Vision Driver 353.82 (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_Display.3DVision) (Version: 353.82 - NVIDIA Corporation)
  NVIDIA Graphics Driver 353.82 (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_Display.Driver) (Version: 353.82 - NVIDIA Corporation)
  NVIDIA driver HD Audio 1.3.34.3 (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_HDAudio.Driver) (Version: 1.3.34.3 - NVIDIA Corporation)
  NVIDIA PhysX System Software 9.15.0428 (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_Display.PhysX) (Version: 9.15.0428 - NVIDIA Corporation)
  Update NVIDIA 10.4.0 (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_Display.Update) (Version: 10.4.0 - NVIDIA Corporation)
  MOC ModPack Client version 1.4.0.0 (HKLM-x32\...\{E2F3187C-2B94-486F-8914-E69211487FB6}_is1) (Version: 1.4.0.0 - Odem Mortis)
  Razer Synapse (HKLM-x32\...\{0D78BEE2-F8FF-4498-AF1A-3FF81CED8AC6)} (Version: 1.18.21.26914 - Razer Inc..)
  Realtek Ethernet Controller Driver (HKLM-x32\...\{8833FFB6-5B0C-4764-81AA-06DFEED9A476)} (Version: 7.92.115.2015 - Realtek)
  SHIELD streaming (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_GFExperience.NvStreamSrv) (Version: 4.1.3000 - NVIDIA Corporation) hidden
  SHIELD (HKLM\...\{B2FE1952-0186-46C3-BAEC-A80AA35AC5B8}_ShieldWirelessController) wireless controller driver (Version: 2.5.12.11 - NVIDIA Corporation) hidden
  Steam (HKLM-x32\...\Steam) (Version: 2.10.91.91 - Valve Corporation)
  Symantec Endpoint Protection (HKLM\...\{A5DCF955-5D4A-471D-8CB3-DCFDF5C5DEE7)} (Version: 12.1.5337.5000 - Symantec Corporation)
  TeamSpeak 3 Client (customer HKLM-x32\...\TeamSpeak 3) (Version: 3.0.17 - TeamSpeak Systems GmbH)
  Warframe (HKLM-x32\...\{A42DFA57-3412-4337-B96A-25AA241E6D81)} (Version: 1.0.0 - Digital Extremes)
  WOT (HKCU\...\{1EAC1D02-C6AC-4FA6-9A44-96258C37C812na}_is1) (Version:-Wargaming.net)
  World warships (HKCU\...\{1EAC1D02-C6AC-4FA6-9A44-96258C37C814na}_is1) (Version:-Wargaming.net)

  ========================= Memory info: ===================================

  Percentage of memory used: 31%
  Physical RAM total: 8135,98 MB
  Available physical RAM: 5552,67 MB
  Total virtual: 16270,17 MB
  Available virtual: 13616,05 MB

  ========================= Partitions: =====================================

  1 drive c: () (fixed) (Total: 931.41) (Go free: 360.16) NTFS
  2 drive d: () (CDROM) (Total: 0.66 GB) (free: 0 UDF OF GO)

  ========================= Users: ========================================

  User accounts for \\JUGGERNAUT

  Guest administrator Ryan

  End of the log *.

  Any help on this would be greatly appreciated!

  I hope someone has an answer that works! I tried to contact microsoft directly, and after waiting for more than two hours, the call is dropped.

  Thanks in advance!

  It is possible that the problem has nothing to do with your computer, but a problem with the router we to branch or even the cable itself.

  It is also possible that network on your computer installation has failed.

  You can probably find a plug in pension that will adapt to your desktop which can be used for another installation of network.  They should be easy to find and relatively inexpensive.  I saw this solution work several times.  Simple and cheap.

  My best advice is to stop misleading with Windows before making a mess of it.

• Instability Wireless: Atheros AR9285 briefly disconnects every few minutes

  I bought an ASUS K50ID on Newegg and tried to connect to my Netgear wireless-N, through its Atheros AR9285 (who claims to have installed the latest drivers)

  Connections starts without a hitch, but after awhile, I noticed that the connection would be cut at random for just a second.  It was not bad enough to attract my attention just browsing, but when I tried to use Windows Live Messenger, it disconnect me every 5 or 10 minutes, and then I would sign immediately.  He would say that he had to reconnect to the network, is not just a problem of software with WLM.

  I have disabled the option to turn the card wireless for powersaving (also, it's funny that it uses by default this option to 'on')

  I looked for manual updated driver, but Atheros website is confusing and sometimes in French and is not my card the list of drivers, only for more information.

  I checked my router settings, etc., and it seems fine.  It of just that sanded Atheros AR9285 and its lack of will to stay connected! Thanks in advance for any help you might be able to provide.

  P.S. I also disabled the IP assistance service, someone said that it can solve. There can be no.

  Hello

  Check with ASUS updated drivers manually as well as possible firmware updates for the
  Netgear router. Also check the placement of the router - if it is closer to 6 feet or too far-
  is there a lot of electrical interference or metal in the line of fire - or too many walls - different
  floors of level - or just distance.

  Of course there would be something wrong with the new computer - or the router.

  Check with the ASUS support and their forums.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  NetGear - Support
  http://KB.NETGEAR.com/app/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• JavaLoader 5.0.0 able to load the cod but debugmode connects then disconnects instantly

  I am able to complete the following:

  U C:\Eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\bin>JavaLoader-p0x23515341-D1-charge - w5150 C:
  \Users\toddj\Documents\BBProj\Coffeehouse-BlackBerry\deliverables\Standard\5.0.0\Coffeehouse.cod
  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2009 Research In Motion Limited
  Connected
  Coffee done loading
  262188 bytes sent to ~ 1048752 bps
  Disconnected

  C:\Eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.25\components\bin>JavaLoader-p0x23515341-D1-w5150 u debugmode
  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2009 Research In Motion Limited
  Connected
  Disconnected

  My question, why connect debugmode then immediately disconnects?

  Finally, I would like for debugging on the device of Eclipse, but when I select "Debug As BlackBerry Device", nothing happens - the debug perspective does not open and I do not see any notification process.

  Geez, why is it so * beep * ing difficult at the same time.

  Finally!

  Hallelujah!

  I can't believe that the fix was to use BlackBerry Java plug-in for Eclipse Version: 1.3.0. I'll have to take the good and the bad on this one. 1.3.0 is far from ideal, but I have to be able to debug on the device.

• "Wireless LAN, Wi - Fi adapter media disconnected".

  Hello, all,.

  So I had problems with my laptop Windows 8.1 and wireless internet connectivity. Recently, I saw a tip online to try the command "ipconfig/release" then in cmd.exe, followed a "ipconfig / renew". When I tried the second line, I got an error message saying "media disconnected" many cards. Here's my ipconfig:
  Windows IP configuration

  Name of the host...: KEVIN-LT

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: ARRIS

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Device Bluetooth (personal area network)

  Physical address.... : B4-B6-76-40-90-65

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 12:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct virtual card

  Physical address.... : B4-B6-76-40-90-62

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 13:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Hosted network virtual card

  Physical address.... : B6-B6-76-40-90-61

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet Ethernet adapter:

  The connection-specific DNS suffix. : ARRIS

  Description...: Realtek PCIe GBE Family Controller

  Physical address.... : 18-67-B0-DE-7E-CA

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::8cd5:1414:648e:e57 %4 (Preferred)

  IPv4 address: 192.168.2.9 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday 5 December 2013 01:52:46

  End of the lease...: Thursday 5 December 2013 23:46:28

  ... Default gateway. : 192.168.2.1.

  DHCP server...: 192.168.2.1.

  DHCPv6 IOOKING...: 256948163

  DHCPv6 DUID customer...: 00-01-00-01-19-4D-BF-D9-18-67-B0-DE-7E-CA

  ... DNS servers: 8.8.8.8.

  8.8.4.4

  209.55.27.13

  NetBIOS over TCP/IP...: enabled

  Wi - Fi wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. : ARRIS

  ... Description: Intel Centrino Advanced-N 6235

  Physical address.... : B4-B6-76-40-90-61

  DHCP active...: Yes

  Autoconfiguration enabled...
  . : Yes
  Tunnel adapter isatap. ARRIS:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : ARRIS
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 2:
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:79fd:286 b: 16f9:3f57:fdf6 (Preferred)
  Address IPv6 local link...: fe80::286b:16f9:3f57:fdf6 %9 (Preferred)
  ... Default gateway. : ::
  DHCPv6 IOOKING...: 184549376
  DHCPv6 DUID customer...: 00-01-00-01-19-4D-BF-D9-18-67-B0-DE-7E-CA
  NetBIOS over TCP/IP...
  . : Disabled
  Any ideas on how to solve this problem? I would really appreciate it.
  Thank you!

  Hello

  If it's a laptop, laptops the most have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  On any computer.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.
  

• 1370 wlan mini-pci card - media disconnected? no signal, connects to the network

  I installed a dell pc on a 1370 wlan mini card

  Dell inspiron 1200 reference.

  I get a signal of 1% with the wireless network wizard. I was able to

  get in touch with the router, but the signal is very weak.

  I made a report with ipconfig/all, and here are the results:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Christopher Schmidt > ipconfig/all

  Windows IP configuration

  Name of the host...: CHRISLAPTOP
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Adapter Ethernet Wireless Network Connection 4:

  State of the media...: Media disconnected
  ... Description: Dell Wireless 1370 WLAN Minipci car
  d
  Physical address.... : 00-16-CF-CC-13-2E

  The State of the media: media disconnected means that the

  card is not seated correctly?

  In Device Manager, it says that the device is functioning properly.

  Driver version: 4.10.40.0

  Driver date: 02/11/2005

  
  

• Ethernet, says "cable disconnected".

  Ethernet, says "cable disconnected" I looked at a few posts... but they are old messages and say, update to 3.28.2, mine is Articles 3.30.1

  Referring you to update to 3.28.2? Where do you get this error message? Your iMac still running OS X Lion mountain 10.8.1? What exact model is your iMac?

• iPhone disconnect WiFi in case of sleep

  My iPhone warning disconnect the wifi when sleep but will automatically reconnect after a few seconds, when I turn it back on. I don't know what happened, but it just started a few days ago.

  If it's important, I'm in iOS beta and race 10.1

  Hey pontais,

  Thanks for you using Apple support communities. I can see from your post that you are having problems with a Wi - Fi disconnection when your iPhone 6 is not in use while running iOS 10 beta. The public version of iOS 10 was released with the latest version being 10.0.2. To isolate and help solve this problem, we want to go forward and you updated to the release version with the procedure described in this link below:

  Any software beta iOS
  

  Download the final version of iOS

  If you have a beta version of iOS and you want to download the final version, follow these steps:

  1. Connect your device to iTunes.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery Mode screen.
  3. When asked, choose updates to download and install the latest version of iOS nonbeta.
     An update installation does not affect your settings or content.

  Once you have downloaded the final version, monitor your Wi - Fi again and let us know if you experience the same problem.

  See you soon.

• App store disconnection under macOS Sierra

  Since I updated to macOS Sierra, it seems not be anyway to log out of the App Store.  I do not particularly want to stay connected all the time.  Does anyone know how to sign out?

  Hello, JBob2!

  Thank you for using communities Support from Apple. After reading your post, I understand that you do not want to be able to disconnect from the Mac App Store - I definitely want to make sure that you can do!

  In this article, all you need to do is click on Store > Sign Out.

  Mac App Store: Sign in and out

  See you soon!

• Mac Os Sierra keep disconnection!

  Hello

  After the mac updated two days before... There keep a disconnect me whenever I go full screen when watching a video on youtube or any other site... I tried to (chrome-Safari-firefox) and the same thing happened... It's very very frustrated that I can't do anything... and it's happen only when I go full screen!

  and I unchecked the (display have separate spaces) and nothing has changed. .it oust Journal

  

  and by the way, I have (disconnecting it automatically) uncontrolled forever

  

  I am very frustrated with this problem... Please someone help me...

  Same problem with the video in full screen. However, it also happens to me if I work in a Word Document, for example. It seems to happen randomly.

  I don't think that this problem will be solved until Apple released a patch or something.

• Watch frequently is disconnected

  Since the upgrade to iOS 10 (iPhone 6) and watch OS 3 (first generation shows) my watch is constantly becoming disconnected from the phone. This is a quick fix (I just turn off and turn on the Bluetooth on the phone and it is fixed). But it's boring. I go through it a dozen times a day. And it never happened for the whole year I had the watch until I upgraded. Patches? Thoughts? Suggestions? I have not matched the watch and re-paired, but it is still frequently disconnect.

  Hi there, dturkelson!

  Thank you for reaching out by Apple Support communities. From your post, I understand that since the update to iOS 10 on your iPhone 6 and watch OS 3 on your Apple Watch, you had some difficulties to keep connected. I know how it is important for the two devices to work together and want to make sure they stay connected!

  I see that you have tried to disable the pairing and repair the iPhone and Apple Watch, but the problem persists. It was a big step to try! Since it did not help, I have a few other things I can say to you.

  First, if you haven't already done so, restart the iPhone matched following the steps described here: restart your iPad, iPhone or iPod touch

  After rebooting the iPhone, test how well your Apple Watch remains connected.

  If you're still having problems with connectivity, désapparier your Apple Watch from your iPhone by following the steps detailed here: pairing your Apple Watch and iPhone

  Reset the network settings on your iPhone under settings > general > reset > reset network settings. This will remove not your personal information (contacts, photos, calendar of events, etc.), but it will remove networks WiFi recorded and passwords, as well as all the APN or previously used VPN settings and Bluetooth devices connected.

  After the reset, pair your Apple Watch with your iPhone again and test the connectivity.

  Finally, if the iPhone and Apple Watch still have difficulty to stay connected, back up your iPhone and then restore it to the factory settings. Instructions to save can be found here: How to back up your iPad, iPhone or iPod touch

  And instructions to restore can be found here: using iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

  Once the restore is complete, set up your iPhone as a new device (i.e. without using your backup, at least temporarily). You can connect to iCloud iMessage, FaceTime and iTunes and the App Store. Pair your Apple Watch, then test connectivity. If everything works as expected, go ahead and restore your backup following the steps are: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• My internet keeps disconnecting but easily reconnects when I go in the diagnoses

  For the past few weeks, I had a problem with my internet on my macbook pro (retina, 13 inches, end of 2013 and it runs El Capitan 10.11.5).) My internet is Time Warner Cable and my router is a motorola, arris (I don't have an airport)

  Basically, my internet spontaneously does not work anymore (but is not completely disconnect from the network). I have to go to network preferences and then run diagnostics to reconnect, but still, it reconnects immediately after I run diagnostic tests and press 'always allow' keychain. Everything in the list network state is usually green except for the Internet and the server, who say failed and are red in color. ISP or settings network is sometimes as red.

  It really happens randomly - sometimes all ten or fifteen minutes and sometimes every two hours.

  I never have this issue when I use internet in my school and it happens at home, however, I don't think it's a problem with my internet service provider because my computer is the only device in my apartment which has faced this problem (my roommate also has a macbook pro and we all two iphones)

  I rebooted my computer, reset the router a few times, talked to apple support, and nothing has helped.

  I have a wireless diagnostic report when it happened last week I saved and can send if it would help (but I do not know how to reach it...)

  Thank you!

  http://osxdaily.com/2015/10/16/fix-Wi-Fi-problems-Mac-OS-x-El-Capitan/