My Acer Aspire 5951 G will not charge while processors are in use

Similar Questions

• Acer Aspire laptop bluescreened, will not start even in safe mode, running vista

  My roommates son asked me to help him to be on the internet, which I did, ran unusually slow in doing so, I noticed it when I checked, I found that the notebook had three solutions of different software protection, antivirus, Norton, McAffrey and AVG 2011 version for free. Also I noticed he had some solutions that provided a diagnosis, list of problems found and wanted to pay for the product before they would allow acccess to the fix. I uninstalled Norton and the McAffrey and improved the AVG free version of 2012. I also uninstalled the pesky diagnosis/buy me for the correction and the ask.com toolbar software. I installed ccleaner from piriform as well. The laptop seems to run a little faster, but the next morning he projected blue and when I tried to start it in safe mode it not loaded so far and then frozen, always in the same spot something AVGi and then it crashes, it will not load the rest of the necessary drivers. I tried to boot to the last known good as well. I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.  I am at a loss, my sons friends bought the laptop (Acer Aspire 5315) for $50.00 and did not get a recovery disk so that the option does not exist or the other. What can I do to solve this problem. I'm sure that for some reason, it has to do with the BIOS and I went to the Acer site (from my laptop) and downloaded something to repair the bios on a flash drive, but me is not good because I can not start on either flash player. I am at a loss here and have no idea how to solve this problem. I am practically self-taught and I am a beginner when it comes to repairing the problems. This one is right behind me, someone has an idea what is my problem?

  I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.

  If you tried to install Windows XP, and it says that? Do you have any installation CD? I don't want to say this, but maybe the hard drive went kaput. Maybe a little rare, but it can happen and so he bought the laptop for $50, which I am sure he did not a store. You hear a clicking sound from the hard drive? Have you checked for the hard drive in the BIOS?

• My Acer Aspire SW5-012 will not be upgraded to Windows 10

  I'm on automatic updates of Windows and also manually searched updates and ensured that I am current. But whenever I try to run the program for Windows 10, I thought that the upgrade is not yet available for my device.

  Any suggestions?

  Have you tried to install with media creation tool?

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

• My acer aspire V nitro will not download firefox 39, it hangs at 46.6 m and says that the file can't be varified

  I uninstalled the old version of Fire Fox and I tried the download 39.0 out of sight of firefox. Now download 50% cycles then goes back to 0% and start over again. I stopped this cycle to 4 times through. The computer is running windows 8.1 and internet Explorer seems to work very well. I have other computers running firefox with no updates of prlblems.

  You seem to be using Firefox 39 ad on a 8.1 Windows machine.

  I guess it's another machine, then use it to download the installer of Windows of Firefox 39, then transfer the file using a USB key or another method.

  Get Firefox to a site official use getfirefox.com or mozilla. org

  • See How to download and install Firefox on Windows

• HP Officejet 4620. Windows Vista. Acer Aspire laptop. Will not print wireless or cable w/USB.

  HP Officejet 4620/Windows Vista. No error message. Problems started after installing new memory cards and drives. I followed the instructions to the letter several times, without success. When I click on the "Print" button, all I get is a window popping up labelled "HP Officejet 4620 (network); below is a blue dot/circle with an exclamation point in the middle. to the right of that, "BOLD" letters that say 'the printer is ready. below is a message, "click OK to continue." at the bottom right of this window is the bar/button "OK". When you click on this button (that I have to hurry because the window flashes market again and again!), the window disappears and nothing happens: no error message, warning or any communication.  At the end of the day, I tried to connect the printer cable USB (nine) and got the same window. It makes me NUTS. The person said tech (friend) who has installed cards and disks to the IP address of the printer keeps rolling. If that's the case, surely linking directly to the computer with the cable would have worked? Someone please help!  Thank you.

  Hello UncaJon

  What application you are printing from? You can print from Microsoft Notepad?

  Also, try to run printing HP and doctor Scan. Let me know if it finds problems or if it passes all the tests.

  Try the HP Print and Scan Doctor

• Phone of blackBerry Smartphones will not charge in the areas at room temperature

  Hi all

  Is it normal if my phone blocking load once loaded into the areas at room temperature? Thank you

  In most electronic devices, the load will stop if it detects that the battery is above normal temperatures for safety. I imagine that the BB has this backup as well.

• Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Laptop is about 2 years old.  Running on the Windows 8 origninal accompanying.  Had the same problem when it was purchased.  He sent to Acer.  Returned with no report / Details.  Has worked very well. Until recently.

  Noticed that seeing orange lights up when it feels like load and stops at 35% load.  Load is something dark, don't miss especially.

  Tried:

  Stick a PIN in the "battery reset" hole on the back

  Uninstalling the 'API Microsoft' battery

  Remove the battery to see if it'll work without it (it has an internal battery)

  Of course Acer won't help now since the warranty has expired.

  Please notify.  Thank you.

  Power plug has been checked, flinched 19V.

  Laptop briefly, then lost load capacity.  Checked power once again, 0V.

  Power adapter is bad.

• Acer aspire 5740-6378 will no longer charge the battery under Windows 7

  The title sums it up.  I have a new computer that beginning yesterday will not charge the battery.  I didn't have problems with battery or power systems before that.

  * original title - (sector, do not load) with 21% of battery. It has been so for 24 hours after several reboots. It is a 2 month old acer aspire 5740-6378. Is there a way to reset the power control software? So far, he has played very well.*

  Managed to find a solution that worked for me.   I write this to help those who like me have sought a forum where this problem has been fixed.  I sent to acer tech support and they finally gave me this procedure:

  Could you please go through the following steps to perform a power drain: 1. unplug the adapter from the laptop. 2. remove the battery. 3. press in and hold the button for about 30 seconds, then release. (You won't see anything happen) 4. connect the power adapter to the laptop. Make sure that the power adapter is plugged in. 5. Start the computer as usual. 6. After Windows starts, insert the battery. I hope this helps someone! Mike

• All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen

  All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen "Acer Explorer beyond the limits; Powered by Android.

  What should I do?

  Problem with the cord/charge plug unit... is very loose and since I bought it. It takes an extraordinary amount of time to load. Is it defective?

  According to the description of the connection of the power supply or you have a problem with the power outlet (perhaps folded ut of shape enough to cause free adjustment) or Charger (connection flashing in-house, exit misfeed or simply that bad). If I was in your position I would take back and get one without load problems. You can send it through Acer support and they will fix it for you, but back to the seller will be faster.

• Acer Aspire 5610Z Windows does not load... No recovery cd

  I have an Acer Aspire 5610Z Windows does not load, when I use the F10 it comes up says:

  Modify the Windows boot option for: Microsoft Windows Vista

  Path: \windows\system32\winload.exe

  Score: 1

  Drive hard b44bb44b

  [/ noexecute = optin]

  That do I don't know...

  Thank you

  "When I start the laptop, 1 screen 2 times, beebs gives me the whats available in the computer, Press (F1) to resume, or (F2) of the installation.

  I wish that you mentioned the "beeps" in your original question.

  When you start a computer, you will receive a 'beep', which indicates that the motherboard has spent his own self (POST tests. Power on self test))

  'beeps' (plural) normally indicate a hardware problem.

  Read the Information on the links about different codes "beep":

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  Contact the Acer Support if under warranty.

  http://support.Acer.com/us/en/default.aspx

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• My pencil to the iPad will not charge.  What should I do?

  My pencil iPad suddenly stopped charging.  The connector of the lightning and the wall adapter successfully charge my iPad and my iPhone 6 but will not charge my pencil.  The green light on the pencil map is no longer lights up.  The pencil is about 7-8 months.

  Hello

  Check the ports on the adapter load load pencil Apple for debris.

  Also try to load your Apple pencil by plugging in the connector of the lightning on your iPad Pro. If the battery is exhausted, a second charge of 15 should provide 30 minutes of use.

  • Use the pencil to Apple with iPad Pro - Apple Support

  If the problem persists, contact Apple support (mail service may be available) or make a Genius Bar reservation in order to your Apple pencil and accessories checked power warranty:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Satellite battery click on Mini L9W - B keyboard will not charge

  My keyboard battery will not charge, I left it loads for more than 24 hours after the battery 1 reached 100%.

  I checked the version of the bios that is 1.70. I read the other posts on this particular issue but unfortunately nothing works for me.

  It shows the symbol of charge on battery 2, but it did not go above 0%. If I turn on the battery runs immediately battery 1.

  Please advise me on this point because otherwise I will have to return my satellite click mini. Thanks in advance

  You completely turned the device off?

  Do... Press and hold the power button / stop until the device turns off.
  In addition, you can stop the unit pressing and holding the key SHIFT and then choose SHUT OFF

  Then check the connection between the keyboard and Tablet docker... possibly disconnect and connect again.
  Once the unit turns on again and check the battery State of charge connection adapter to the device.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.