My Apple TV does not connect to my wifi

Similar Questions

• WiFi and apple tv does not connect for Colocation

  WiFi and apple tv does not connect for home sharing

  Please give more details about your configuration, the version of the Apple TV and software, home sharing server, etc. Others here know much more about it as I have, but they will need a clear description of the problem. You can also try to search for this site for home, sharing problems and take a look at any recent threads that you present to.

  You use the same Apple ID everywhere? ATV currently sems to have problems with Apple improved authentication protocols, so I hope they are not turned on for your Apple ID. You have enabled sharing House in configuration of the ATV?

• PlayBook of blackBerry Smartphones does not connect to the WiFi PRIV "hot spot"

  BlackBerry PB does not connect to the WiFi PRIV "hot spot". Implements immediately with an android tablet based - Hudl of Tesco UK - but the PB comes not to connect to the private. Reading through various bulletins and cannot find anything obvious that I missed. PB connects to the other wifi fine.

  Sorted. And so simple. Just changed PRIVATE WiFi "hot spot" to 5 GHz. thanks to Bruce using BlackBerry.

• iPad does not connect to the Wifi on the range 192.168.0. *.

  I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

  I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

  After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

  My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

  Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

  Is there a future fix for this?

  Re: iPad wifi suddenly does not save

  Change the range on the router you want to connect to.

• Mac does not connect to the wifi and keeps crashing

  My macbook pro (end 2013) will not connect to my wifi although each device only. Now he has slow veey hone and continues on crashing, doing simple things like a PDF of scrolling. It all started a week or two after the upgrade to OSX El Capitan

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• HP Deskjet 3055 A does not connect to the WIFI with security

  I'm trying to configure a Deskjet 3055 A on my DD - WRT router.  I am a highly qualified network engineer, so I don't know 100% what I'm doing.

  First, DD - WRT supports WPS connection, because these are very precarious.  This means that my only way to connect the pritner to my home network is to connect to my PC and use the Setup utility (downloaded from your page drivers) I use the 28.8 version.

  My router supports the 2.4 and 5 GHz and I know the printer is only 2.4 GHz.  I disabled completely the 5 GHz network in order to connect the printer, even though it shouldn't have any effect.

  I restarted my router and reset the printers wireless network using its integrated control panel.

  In any case, after a shameful 2 hours troubleshooting, I did discover that the printer WILL NOT CONNECT to the WIFI network if any security is applied against it.  It works 100% fine with open security however, it is totally unacceptable.

  I tried both WPA Personal and WPA2 Personal, both with the same effect.

  For reasons to try, I added also the printer to my network WIFI open and tried to manually change the setting WIFI via webinterface of printers, however, whenever I try and access the wireless configuration wizard, I simply get an error message saying "Internal system error" - eventually I managed to work around this another bug that has been there for years (see http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Internal-System-Error-prevents-access-t...

  After installing printers web interface WIFI, the problem is always the same and it does not connect.

  HP, we were in the order of 2500 of these printers for users of our remote site.  If you don't come to the top with a quick solution/bug fixed, consider the lost business!

  Concerning

  Ian

  After playing well, I managed to find a solution for this!

  For all users who are unable to find a solution by using the other methods, here's what to do.

  Change your local network to open the safe but note your WIFI settings for your default installation.

  Connect the printer to the open network the HP software (via USB cable)

  Go to the URL of the printer, but make sure that you connect through HTTPS - if you get an internal system error, keep refreshing until it works (WHAT A JOKE!)

  Click on 'Network', then click 'Advanced' on the left.

  Enter the network settings as they need to be secured.

  Downstairs, check "in an infrastructure network, use 802. 11b / g behavior (assuming that your assisted supports g, otherwise use the b only option), then click on apply.

  Turn on your wireless security, on your router and then the printer should connect!

  I am really confused as to why this is not automatically enabled, if the printer is not working with security on a Wireless N network wireless, then have this as the default!

  HP - feel free to thank me in this post!

• Troubleshooting-new HP with Windows 7 spectrum XT, does not connect to the WiFi at home?

  So I just got my brand new HP ENVY spectrum XT Ultrabook with Windows 7 Home Premium installed. 64 bit. I start it, everything works fine, except that when I connect to my WiFi at home. I tried to connect, entered my password, but it does not connect. Also tried the easy connection on the router. No luck. I checked my old laptop which runs on Windows Vista to see if WiFi worked always, and this is where it gets interesting. I was able to browse the internet and internet worked, but suddenly Windows informed me that "another computer uses the same IP address" and it stops my internet capabilities on my old laptop. I connected my cable ethernet on both computers, and it works for both computers when it is plugged. While that plugged, I discovered that I could create my own IP address, which I did on my old laptop and so far that seems to have solved the problem. However, my DESIRE is always not connecting to WiFi. Any advice?

  Hi ZachRhodes3,

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  5 steps: how to set up your network wireless home

  For reference:

  How can I troubleshoot network card?

  Wireless network card: frequently asked questions

• Apple Watch does not connect to the iPhone 6

  After updating my iPhone to IOS 9.3.3 6 all my bluetooth devices registered were gone including my Apple Watch. Now, it appears under "other devices" so I can't connect it. I already started my bluetooth and off and reset my iPhone but nothing worked. Any suggestions? Thank you.

  Hello

  Your watch is not supposed to be listed under "Other devices" on your iPhone (settings > Bluetooth), but it should be included in the section "my devices".

  To check the connection status of your watch to your iPhone, go to the eye of settings on your watch:

  • When you view the time on your watch dial, slide up from the bottom edge of the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected:
    • Connected and a symbol of green phone in the upper right shows that the watch is connected to your iPhone via Bluetooth.
    • Connected and a green cloud symbol indicates that your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • Disconnected shows that your watch is disconnected from your iPhone and is not connected to a Wi - Fi network. The symbol in the upper right corner will be a red telephone with a line through it. The same symbol will also see the top of the watch face.
  • Slide down again to return to the watch face.

• My mac does not connect to the wifi unless I turn on the iphone

  My home wifi works great though I have my wifi enabled on my iPhone. But if I have the wifi turned on on my phone, free wifi does not work half the time, unless I wake up my iPhone. I do not use a personal hotspot, or any other type of phone wifi-centric. Just a normal modem and apple airport extreme router.

  My mac is a model of iMac end 2015 running El Capitan (later). Phone is running last sof

  Any ideas how to solve this problem?

  What exactly do you mean by "does not work? What is going on?

• iPhone 6 does not connect to some wifi routers

  Hi gurus of the Forum.

  I hope someone can help with this weird wifi problem I have on an iPhone 6. The phone is running iOS 9.2.1 (latest version) and I'm in the United Kingdom. The phone has been connected to my home router, which is a Hub of sky and works well, I hung up for 5 minutes and then went back to it and the wifi connection was gone. I tried to reconnect and he would not find the router. I've tried everything to fix the problem but no luck. Now here's the weird thing in the household, we have another iPhone 6 (iOS 9.2.1), a 5 s iPhone (iOS 9.2.1), 2 x iPads, MacBook Air, and all these have no problem of wireless connection to the router (Sky hub) and connect to the internet.

  In my investigations (using neighbor routers, public routers, etc.), I discovered that the phone does not detect blank sky hubs hubs, hubs of Talk Talk, an iPhone 6 set up as a personal hotspot. Wifi looking for networks but not found. However, the phone WILL find and connect to networks and hubs BT so I know that the phone's wifi works perfectly OK.

  To try to solve the problem, I did the following: -.

  1 reset the phone (hold down Home and Power)

  2 reset the router

  3 reset the 'network settings' on the phone.

  4 erased the phone and set up as a new phone (still will not find the router)

  5 restore an old backup.

  6 disabled 'assistance to wifi '.

  7 disabled "wifi network" under the heading Privacy > sites > System Services.

  8A tried to manually enter the SSID and password of the router on the phone.

  9. manually entered the device and wifi MAC address of the router

  10. banged my head against a brick wall - has not helped and I had a sore :-) head

  So in my opinion, I tried everything what can be done to solve this problem, but nothing helped, so I come to the community to beg for help.

  I read something about iOS 9.2.1 having wifi problems, but I will reiterate, the phone was working fine and then stopped without reason. I have also other phones running 9.2.1 with no problems.

  Please help as my head becomes painful overall hit.

  Thank you very much in anticipation

  Steve

  PS please don't waste your time and your mine responds telling me to do the things that I've done - thanks.

  Hello

  Anyone have any ideas? I am all of them.

  Thank you

  Steve

• M177fw does not connect if the WiFi extender is activated

  Main WiFi router's CISCO E4200

  WiFi Extender is TP-LINK TL-WPA4220

  Printer is HP LaserJet MFP M177fw Pro

  Date of the firmware: 20130823

  Install Smart SW Version: 20/06/2013 1.0.13171.352

  Printer is in the same room as the CISCO router.  Extender is located in another part of the House.  Extension signal is low near the printer.  The Extender is turned off, the printer immediately connects to the WiFI network.  When the extension is enabled, the printer tries to connect several times and fails.  All computer iPhone, iPad, laptop and smart TV in room normally works with the CISCO and extension under voltage, but the HP printer does not work.  Is there something I can do to fix this?

  This has always been a problem with 2 AP make sure the router and the Extender are on different channels, like 1 & 6, 6 & 11, 1 & 11.   Where is the printer, set this AP to channel 1.  Try now.

• IPhone does not connect to the WIFI in the House when not near router

  This is a recent as problem it used to work fine.

  My iphone connects to the WIFI in my house when I'm in the same room as the router but won't connect to nowhere elsewhere in the House.

  Any other apple device I have works fine, so this would suggest that there is a problem with the phone?

  Is it possible to fix this?

  Thank you

  If your iPhone is in a case, first thing I would try is to remove the case and see if that fixes it.  Other that that, I can't imagine any easy fixes.  This article may help:

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  My next step would be to take it to a nearby Apple store and see if they can diagnose and help you.

• does not connect the adapter WiFi AC600 on Win10

  I received the AC600 wifi card and it will not connect to or even show our connection to the internet on my windows laptop 10 5g. It will show the connection 2.4 g, and my laptop has with or without the adapter plugged. I downloaded the disc, I rebooted the router and the computer. He said that all the drivers are up to date. My phone is connected to 5g, so I know that's not the router.

  You have a different SSID for 2.4 Ghz and 5 GHz signals.

  You are running the latest drivers for your version of Windows 10?

  To install the driver:

  1. Download the zip file of the driver on the Linksys support site
  2. Extract the files
  3. Right click on the INF (netrtwlanu.inf) and choose install

• Q10 Q10 blackBerry does not connect to my WiFi at home

  My new Q10 see my protected WiFi password but authentication times out when I try to connect.  As a sidebar, I'm alse unable to connect my wireless HP printer and have been told it is because of Mac settings to the printer.  My printer and telephone connection problems may be related.  My priority is to get my new BB to connect to my WiFi.  I have connected successfully to a Telus passwork protected WiFi is probably not the phone.

  Thank you

  I talked to the former, IT supports a colleague (I worked for SW Co.) and he confirmed that all the settings are OK. Router was 8 years old. Went and bought DLINK updated now, printer and Q10 connect.

• Suddenly, my iMac does not connect to my wifi

  My iMac suddenly cannot connect to my wifi network

  Other devices on my wifi network are connected well

  diagnosis cannot identify the problem by imac

  I restarted the modem and the router several times

  any ideas?

  What is the brand and model of your wireless router and what is the exact model of your iMac? Did you change or update all software on the iMac recently? Can your iMac still connect to the router via an Ethernet connection?