My computer can not be stopped unless I do it manually.

Similar Questions

• My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

  Hi Harry,.

  · What happens when you try to stop?

  · You receive an error message or error code?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  You can check the link below: Windows XP Shut Down and auto-restart issues: http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

  Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• Computer can not detect any sound cards and graphics or communication ports.

  Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything.  hate viruses

  http://support.Dell.com/support/downloads/index.aspx

  Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my computer can not find windows Defender?

  Why my computer can not find windows Defender?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• ASUS computer: can not scan wireless because I've upgraded to windows 10

  Since I've upgraded to Windows 10 on my Asus computer, I can not connect through the HP Solution Center to scan.  I have a HP computer I upgraded to 10 and everything works fine.  I'm using version 14 of the softward.

  If I wired my computer to the printer, I can scan, but can't scan remotely.

  Can someone help me!

  Hi @Lorraine9,

  Thanks for getting back to me.

  There is corruption in Windows. It is possible that the printer driver has been corrupted, so we will need to remove it and reinstall.

  First, try the steps in this guide:

  • HP printers - printer problems after upgrade to Windows 10

  If the problem persists, follow the steps below to see if you can solve the problem.

  Let's start by cleaning up your computer.

  • Cleaning disc in Windows 10

  • Perform the clean boot in Windows 10 / 8 / 7

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding:

  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Remove printer drivers and reinstall:

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:
  1. click on the Start button
  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".
  3. click on programs and features to launch the window.
  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your HP Photosmart if you see that your HP Photosmart listed, click on it and choose uninstall.
  5 follow the prompts on the screen to complete the uninstallation. Once the uninstallation is completed successfully, please close the programs and features.
  6. then click again on the start menu
  7. this time, type devices
  8. click on devices and printers to open the window.
  9. in devices and printers are looking for your HP Photosmart camera. If you see if please right-click on it and choose 'Remove' or 'delete '.
  10. Once your HP Photosmart camera is like showing in devices and printers please click on any device under the list printers once just to highlight. Click on the above print server properties
  11. click on the tab drivers
  12. search for your HP Photosmart driver. If the list, please click it and choose Delete
  13. select Remove Driver only
  14. Select OK
  15. click apply and then OK in the print server properties window.
  16. close the devices and printers.

  Please proceed to the next step.

  Step 2: Install the device:
  Please click here to download the full functionality of the software and the driver for your printer when the download is complete, follow the guests on the screen to install your printer.

  If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect.

  Once installation is complete, please try printing and scanning.
  Source published by my colleague @X-23.

  If the problem persists, continue.

  • Make sure all Windows updates are updated on the computer.

  Then try to open the hidden administrator account and try to reinstall.

  • How to enable the hidden administrator account Windows 10

  If the problem persists, create a new user profile and try again.

  • How to create a new Local user account in Windows 10

  If the problem persists, you may need to reinstall Windows 10

  I hope this helps. Please reply to this message with the results.

• Computer can not detect the printer so that connected via USB

  My computer runs on Windows 7 Professional and my printer is model # D110a.

  My printer has worked fine since I got it, but a few weeks ago, my computer has been infected by a virus that forced me to reformat and reinstall everything. I installed the necessary software from the installation CD supplied with the printer, but when I try to connect my printer through the 'Add Device' option in the Configuration menu, my computer does not detect even if the printer is on and physically connected by a USB cable.

  Help please, I don't have the money to buy a new printer.

  No problem. Just glad that you solved. Can you go ahead and mark this as resolved to close issue? Thank you.

• Deinstitutionalized drive, my computer can not find the music stored on the internal drive

  I was recently released from the balance of PAYMENTS (Bureau of Prisons), and I gladly paid $25 for the reader deinstitutionalized. I got it in the mail and I am very happy with the improvements, however, when I plug it into the computer, the computer cannot find the music that I invested a lot of money.  The drive works fine.  I can listen to all the songs that are on it, but I can't find them with all software, including the software downloaded from Sansa. When I click on the player, in any program/browser, I get the same thing: the folders that are empty.  It saves space, but sees ALL files.  Many of the albums available at the bottom of the PYRAMID were incomplete and I want to "fill the gaps", but can not find the whites to fill.  Any help would be wonderful.  I paid my $95 (for the player AND have unlocked it) MORE about $1400 in the songs, so it's a pretty big deal for me to get access... Thanks in advance.

  My guess is, it is a question of USB MSC - MTP mode.

  Your drive may be connected to your computer in the title of one of the 2 separate USB MSC or MTP modes.  This is located under settings of the player.  (There is a 3rd option it, auto-detection, trying to connect under MTP mode but then fold in MSC mode, if necessary.)  Is the reason why it's important, files transferred to the Clip under a mode USB can only be seen by your computer when the computer is under this same mode.  And so, for example, if the songs are put on the player mode USB MSC, if you connect later under MTP mode, the computer will not see these files.  If you have set the player to one of the USB modes and always use this mode (MSC mode is the least problematic, in virtue of which the player is considered to be a USB key; however, MTP mode is necessary for files protected by DRM), you're fine.  If, however, you change mode, emits a "invisibility".  And if you're ready auto detection, the computer can change the modes on you without you knowing.

  And thus, better Board: turn on the player (recommended) MSC or MTP mode and stay there and stay away auto detection setting.

  And if you have been on a mode but want to switch to the other and to be able to see all of your files on your computer, set the player to the previous mode, transfer your music to your computer and delete them from the player, re - set the player to new USB mode and transfer the songs back.

• SanDisk Fuze has a problem (cannot recognize on computer, can not load)

  
  

  If you can not load, it's a fault of connecting cable, connector of the rocket or the USB port on your computer.

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My HP desktop computer can not find my router wireless already in line with the other 2 computers. Help?

  Vista HP Desktop shows cable with a new Linksys E1200 as connected to 'Unidentified network', 'Local' only without an internet connection.  Same computer, same Ethernet cable connected directly to the ISP modem works fine. Router has been implemented by drive and works very well for a 2nd office direct by cable and wireless laptop.

  Use exhausted with Cisco and they believe that there may be configuration problems they can not help me solve.  Map network shows "works correctly. With current Ipv4 set to auto configure I get very little connectivity at startup until the weather window says service not available.

  Can someone help me to get these two talking?

  Hi FrankeyeAm,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• My Vista computer will not be stopped, randomly freezes and gives error Logon process has failed to create the security options dialog

  I have a laptop that has recently (in the last month) developed several questions. These issues are: computer does not, get the logon error message failed to create the dialog box options security when I hit Ctrl alt delete, computer hangs when more then another program is open. How can I solve them? My system is Vista Home premium 32 bit any help is appreciated.

  * original title - several issues need help *.

  Hello

  I forgot to include which could help with the connection of safety problem:

  How to restore the security settings to a known working state?
  (For Vista and XP)
  http://support.Microsoft.com/kb/313222

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I bought the HP 7 window to Malaysia & it works normal, but when I'm at home in Myanmar, my computer can not activate because limited geographically with error code 0xC004C017 code

  Dear Sir.

  I can't activated Home Premium window 7 in geographically limited right, about, I bought Home premium Windows 7 in Malaysia & normal work but when I got to the House of myanmar, my computer some problem & I do factory setting of window 7 activate the window 7 but can not activate because geographically limited.
  I bought at the Malaysia (restriction of activation is Distribution and activation required to be held in South East Asia except Singapore), my country is myanmar's Southeast Asia too, why occur geographically restricted. My country myanmar is Southeast Asia. Please solve this problem fix for activation.
  my email address is * address email is removed from the privacy *.
  E-mail address is removed from the privacy *.
  Best regards
  TIN TUN AUNG, Myanmar
  Phone 959 5137238 {}

  Original title: code 0xC004C017

  Try to use the activation of the phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I bought the photo College as long as on the photo gallery I down loaded it does not find low .i loaded in my other computer, no problem, I searched in this computer can not find it helps.

  I bought the College picture for my other computer, no problem, I tried to do the same thing with yhis computer can't find it. I went where it should be, but it isn't here.

  Hello, Dorian,

  If you have downloaded in Internet Explorer, go to tools, click View downloads, and you'll see the directory where it has been downloaded. Not visible? Look down, in the bottom left of the word 'options', click on this and it will display the current default folder for downloads, but after writing it down, you can change it to any folder of your choice (mine is C:\__Downloads - always watch first!).

  If you use another browser, go to this toolbar for browsers and search for the download folder and display it. You should find similar settings for the other locations.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Computer will not be stopped because explorer.exe is always play its closing session.

  When I try to stop a message says that 1 program is still ongoing and that explorer.exe is always play his logoff. The only way I can stop is to choose the force shutdown. How can I solve this problem? Thank you.

  Do yourself a favor go to control panel sounds and "select speaker" icon look select Exit Windows no sound be sure to save and apply. I don't think unfortunaately you can not turn the start windows sound more been trying for some time now. Why the hell they would trigger a sound when you stop 3 concerts of the bones down I'll never know. If this is not your decision should be normal