My computer is slow, blockades and incidents since 36.0.1

Similar Questions

• my computer slows down and play music disturb when I open multiple windows

  I wiped recently my laptop and since then, I've run all the programs that I did before, but when I open other windows when the music plays my computer everything slows down and disrupts the music. Any ideas would be great

  Hello
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/
  It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Start your computer has slowed down considerably since the update KB980408 and KB975496

  Not sure if this should be posted in "performance and maintenance", but since these updates, my boot time slowed. My computer is a month and must not already have these problems of law?

  It could be a coincidence and another question, but I'm not sure.

  Any help is appreciated more.

  Thank you!

  You can determine exactly what causes most of the performance issues by following the steps below:

  Method 1: Put the computer in safe mode and see if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: Clean boot

  If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installed El Capitan, Mac Mail not loading and computer works slower

  It is now a week now since the installation and Mac Mail is still not loading new emails automatically. When I exit and restart the mail, the titles of all new e-mails comes in but not the content. In order to get the content I did some random actions that I remember even they did work once or twice?  The program also randomly stops.

  I have only one Imap account, have cleaned all the unwanted files and trash and as suggested have removed all the log files and rebuilt, and reindexed mail. However, I can't rebuild my Inbox as it won't let me?   Overall, my computer also seems to run slower for all tasks. I have an early 2011, the Macbook Pro 17 "with 16 GB of ram and a fast SSD drive. Before this upgrade, I've rarely seen a spinning ball, and this computer is running fast as lightning!

  Very frustrated with this upgrade so far :-(  Hoping it might be a simple problem or update soon...

  Thank you

  John

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problems since update: slow catalog and crash

  I have recently updated to the latest version of LR and have had problems with the fact that it is slow and crash since then. I recently posted that I had some insights on these imports, but I solved that by optimizing the catalog. This morning I sat down to work, and my catalog has been extremely slow. I restarted my computer several times but LR was still unusable. Then it crashed and said the catalog was corrupted and needed repair. After 30 minutes, I was told repair was not possible. I backup every night, so I copied the backup of my EXHD, and open instead. It was slow but functional. I optimized it and when he finished it is still slow. Now, it crashes after a few minutes of being open and now it will not open at all. It is a vital catalog and the only backup I have is that I already tried to work from. Help!

  Have you tried to disable the GPU in LR / Edit / Prefs / Performance - uncheck CPU chart use

• My computer is slow and takes forever to restart ahe here all programs no matter who it will speed up the

  My computer is slow and it takes forever to reboot can community recommend programs or suggestions that could help me.

  Hi Kenneth,

  Welcome to the Microsoft community where you can find all the answers related to Windows.

  According to the description, you are having problems with the computer running very slow.

  What operating system is installed on the computer?

  Perform the steps from the link below and see if it helps.

  Optimize Windows 7 for better performance

  Optimize Windows Vista for better performance  

  How to set performance options in Windows XP

  Answer to us if you have problems with slow performance, or any other matter of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• My computer runs slower since installing Security Essentials. What can I do to fix this?

  My computer runs slower since installing Security Essentials.  What can I do to fix this?

  Hi David,
  Try following the steps described in this guide: http://www.selectrealsecurity.com/slow-computer/
  It provides simple instructions on how to speed up a slow computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Computer has been great, but now running slow, hot and almost 50% registry errors. What is going on?

  Computer will have 2 years in April.  Had no problems until last week when it crashed.   Could not get going by the restoration of the State of origin.  Now runs very slowly and has very high CPU usage.  Internet often stops.   Fan runs all the time, I think (tried air compressed for the first time and has not solve).  Discovered that I have registry errors almost 50%.  I tried CCleaner for free and did not help.  Any suggestions?

  Hello

  ·         Since when are you facing this problem?

  ·         Using internet connection wired or wireless?

  ·         What operating system is installed on your computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Install the latest drivers and check if the problem persists.

  Method 2:

  Run the troubleshooter for Internet connections and check if the problem persists:

  a. click the Start button, type "Troubleshooting" (without the quotes) in the Search box and then click Troubleshooting.

  b. click network and Internetand then click Internet Connections.

  Method 3:

  If the previous step fails, restart the computer in safe mode and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  You can also follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• Windows XP computer is slow to start and stop.

  original title: PC is VERY slow

  It takes awhile to start and turns off, surfing is quite slow as well. How do I speed it up?

  Some reasons for the slow pace of the computer:

  1. computer has not been maintained - http://www.elephantboycomputers.com/page2.html#Maintenance

  2. the computer is infected with the malware - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  3. the disk is too full. Remove useless stuff, uninstall unused programs. Do not forget to save!
  http://www.elephantboycomputers.com/page2.html#Backing_Up

  4. flaky third party software. Toolbars and modules are particularly guilty in this area. Uninstall toolbars (Google, Yahoo, ISP brand, etc) and look at what modules are in use in your browser (s).

  5. computer has too many unnecessary programs/processes running in the background. Manage your Startup:

  For XP - How to troubleshoot using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx

  For Vista/Windows7 - Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '. Autoruns is also very useful.

  6. the user runs an inflated/invasive such as Norton and McAfee antivirus program. Replace it with a better program. I recommend NOD32 (commercial) or Avast (free). Avira is also good, but the free version has an unpleasant reminder screen (Google for instructions on how to disable it). The user can also run several real-time antivirus/firewall/security programs.

  7. the user has installed new programs that are processor and/or memory-intensive (Photoshop, AutoCAD, Mathmatica or similar) and does not have the power of the equipment.

  8 drive fails and is in PIO Mode (IDE only - not applicable for disks SATA drives). It's very much slow (like being in 1985). See Hans-Georg Michna here information -http://winhlp.com/?q=node/10

  If the hotfix registry PIO only 'glue' (or you have a SATA drive), the drive is probably faulty and needs to be tested.
  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  In addition to the above, see also http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html

  Note: If the computer has always been slow, in addition to the above user may have bought a machine with a less powerful processor and not enough RAM (memory). The normal use of the computer, 512 MB to 1 GB is sufficient for XP; Vista should have a minimum of 2 GB; Windows 7 is less demanding than Vista, but the minimum of 2 GB should also be used.
  MS - MVP - Elephant Boy computers - don't panic!

• I have a program on my computer called Belarc Advisor and I noticed since he put it on your programs and software there is no hosted Virtual Machine.

  I have a program on my computer called Belarc Advisor and I noticed since he put it on your programs and software there is no hosted Virtual Machine. I think that's what it shows but what exactly does that mean?

  Hello

  Don't worry about this as you would know if you need a Virtual Machine (and few people use one).

  Virtual machine
  http://en.Wikipedia.org/wiki/Virtual_machine

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security.

  My computer is slow and I checked the event viewer, and it says I have reached my limits of interruption of security. I ran Netstat-no, but data flashed on the screen, but I can't freeze it at the screen to display the data. What keys down to hold the data on the screen to display it.
  Thank you, OTTO

  original title: interruption tcp/ip connect limits

  Hello

  Try the steps below and check if the problem persists.

  Step 1:

  Run the fix provided in the link below to reset TCP/IP and check if that helps.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Note:

  Step above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Step 2:

  You can check the link provided below for more information on the use of Net command in Windows XP stat.

  Netstat

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/netstat.mspx?mfr=true

• Computer Dell laptop with Windows 7, upgrade to IE9 and now the computer is slow

  Original title: did someone really knows what I need to do?

  I have a Dell laptop with Windows 7 (I have set accidetally to level internet explorer to 9 widows. I need to Java and Adobe. But my computer is slow. I do not know what prorams that I need to run start or to uninstall... Someone really knows what I need to do?

  FYI: with a topic like this, you have 2 strikes against you. Most of the people don't bother wasting time looking to see what your problem...  Next time be brief and specific about your problem, is to give an application (with version) and the code error or describe your problem briefly.

  If you don't want to be a Guinea pig, you can follow these instructions to uninstall Explorer 9:
  http://Windows.Microsoft.com/en-us/Internet-Explorer/help/IE-9/How-do-i-install-or-uninstall-Internet-Explorer-9

  Looks like you want to control the programs that run at startup, right? It is always a good thing to do. You can run MSCONFIG (type in the search window on the start menu).  See the "Startup" tab  So, you can use other applications to display the same information. For example, CCleaner has a 'tool' that does the same thing.  NirSoft does: http://www.nirsoft.net/utils/what_run_in_startup.html

  Browse the list of questions, and if you decide all. For example many applications load stub apps to speed up their startup. If you do not use all the days of the app, uncheck the box and it does not load.  If you do not recognize, this is often the case, track the location of path or to register 'Command' to try to understand what program it is for.  Use google to search for file names. Other people have asked the same question and got answers on the importance of the application is.

  Related, another thing to work is 'Services' (new type who, in the start menu, look for the window). They are a special software that runs in the background to provide services such as faxing or printing. Yet once, often you need not all services.  You can find a lot of information on how to do this in Google search for "Harden Win XP" or related expressions. They call it "Soak" because in this context deactivation of services makes your computer safer, more 'hard' hack by eliminating the places to be hacked.  Don't you worry that many of the articles are 5 or more years, they will be still valid.  Here are some links to help you get started:

  http://www.PCWorld.com/article/111121/windows_tips_supercharge_windows_by_paring_unneeded_services.html

  http://www.TechRepublic.com/blog/security/10-services-to-turn-off-in-MS-Windows-XP/354

  http://csrc.nist.gov/ITSEC/download_WinXP.html

• Windows has been slow to open and load since download IE8.

  Original title: slow loading.

  Windows has been slow to open and load since download IE8

  [Another county heard...]

• My computer is slow and a pop-up Microsoft says that my color palette is perhaps not where it should be for optimal performance

  Original title: my color sceme.

  My computer is slow and a pop-up Microsoft says my sceme color may not be where it should be for optimal performance, before I could click it properly, he disappeared. How can I change my sceme of color for optimal performance, Windows Vista Basic.

  Hi Mydajaz,

  ·         What is the pop-up message exactly says?

  ·         Did you do changes on the computer before the show?

  I suggest you to refer to the mentioned article and check if the problem still persists.

  How can I decide to change the color scheme to improve performance?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-decide-whether-to-change-the-color-scheme-to-improve-performance

  Let us know the results.