My computer will not connect administrator account

Similar Questions

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• my computer will not connect to wireless internet

  I got a bad virus on my computer and I had somone who knew what they were doing to clear my computer.  Once they wiped it they put all the disks provided with the computer back on, but I can't conect to wireless internet. When I go to connect to a network, it is not see the same there is wirless avalible. I know the router is working because my phone can pick up the signal. I don't know what to do?

  Hello

  Turn off the router (unplug power cord), wait a few minutes and then turn it back on.
  Restart and try to sign in.

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------

  2. your router could be suspicious here, you have successfully updated its firmware as a possible solution? And
  I would update your WiFi drivers on computers. How you are positioned in the router?
  Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can use a wired connection
  If possible or download drivers on another computer and transfer them via removabler
  media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
  stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE like
  they are almost always old, and you can search for drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
  DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• computer will not connect to a computer via bluetooth nother

  I am trying to connect two computers using bluetooth for file transfer, but I get error 0 x 80070057 trying to pair.
  usb bluetooth adapters are about 1 foot away.
  two computers running windows 7 home 64-bit
  Help me please

  Hi Jacob,

  1 do you have Bluetooth devices internal or external connected to the laptop?
  2. have you checked if all the Bluetooth drivers on two laptops are very well installed?
  3. this working fine before? If Yes, are you aware of changes to the computer before the show?
  4. is this a problem only when connecting these 2 computers?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can run the Fixit and see if it helps.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems
   
  Method 2:
  
  I would also say to browse these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: It also applies to Windows 7

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Hope this information helps. Response with status so that we can help you.

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• My computer will not connect to the internet. I have wireless explore 6. System displays all NICs with a yellow warning sign. Icons at the bottom of the page are all gone along the bars indicating connection strength.

  Error code 39 on all network adapters
  Recently released the Fix - It professional. The program runs and updates to ensure that spyware and viruses are not on the system. This time something came and said 'this will change some programs and may affect the way your computers run' (something like that) then it poped out and the deed has been done.
  I reinstalled all the drivers for wireless cards
  Still no connection and no bar at the bottom right of the screen.

  Help, please

  Thank you
  Tony1989

  Hello V-ness,

  Thank you for your message.  Please follow the steps below and provide feedback so that we can better help you get this issue resolved.
  Click 'Start' > select 'control panel '.
  Double-click "network connections."
  Do you see your wireless connection?  If so, does say disabled?  Can you do a straight and click enable?
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Set to automatic update ran CHKDSK and my computer will not connect

  Is there an automatic update on demand. When I turned on my computer, it ran a CHKDSK. I saw that he has deleted a file named $I381. When he started to update and got to step 3 of 3, he keeps trying to update. It restarts automatically and goes back to step 3 of 3 screen continuously. I tried closing down and turning them back, but not luck. Me should not be in a journal or anything. It just keeps trying to complete step 3 of 3.  Does anyone have an idea of what past? And how to fix it?

  See if this sugesstion can help you:- http://support.microsoft.com/kb/949358>

• : HP Quicktouch on screen has stopped working, computer will not remain once I connect.

  So looking at the forums and everywhere on the internet, I know this problem starts because of an update that I installed it. But what I'm trying to understand why my computer will not remain after that window opens after I connect, because it restarts whenever I log in. I became extremely frustrated with this issue and I really don't know what to do. of course, there is the system restore, but that work? I can't find quicktouch in my list of programs to uninstall in safe mode, because this is the only mode that will allow me to stay very long. so if anyone has the answer please help me, it's super frustrating.

  Hi cavalierfanatic247,

  Thank you for using the Microsoft answers Forum.
  

  Start on Safe Mode desktop.

  Remove the update that caused the broadcast of programs and features in Control Panel by clicking View installed updates.

  If you are not able to remove the update, use the utility window cleaning to remove the update. See the link below:
  http://support.Microsoft.com/kb/290301

  If the steps above did not fix the problem, try to restore the system to a previous point before windows update when it worked fine.

  To restore the operating system to an earlier point in time, follow these steps:

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  In the System Restore dialog box, click on choose another restore point and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  You have an Essentials and HP drivers disk?

  If the system restore is not enough, you can use the HP Essentials and the disk drivers to uninstall and reinstall the quick key.

  Click Finish.

  You can see the link below for more information:

  http://support.Microsoft.com/kb/936212

  I hope that this will really help you, good luck.

  Kind regards
  Manasa P-Microsoft Support

• My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator. I am the only user on this machine

  My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator, I'm the only user on this computer.   Help please.

  Thank you, Nicholas Cooper.

  Here you go:

  1. Right click on the installer.
  2. Click on "Run as Administrator".

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Fax and Scan will not add an account to my internal Fax Modem

  I tried all the work around listed Forums and Windows Fax and Scan will not add an account to my internal fax modem. The Modem is recognized by Windows 7 and test very well. I am running Windows 7 Professional 64 bit.

  Hello michgaud,

  To set up a fax server

  1. Before you begin, make sure that your computer is connected to the network and you know the network address of the fax server (for example, \\mycompanyfaxserver).

  2. Click the button start , click programs, and then click Windows Fax and Scan.

  3. To use the fax mode, click fax at the bottom of the left pane.

  4. Click the Tools menu and then click Fax accounts.

  5. Click Add, and then, in the Fax Configuration Wizard, click on connect to a fax on my network server and follow the instructions.

  Check the following settings:
  In Windows Fax & scan settings, open tools/Fax and under the general tab.
  Look at the 'Fax select device".
  Your modem is listed here?
  You have the, "allowed to send and/or receive" selected?

  This setting should be checked and selected until all accounts are created.

  You can watch the post following TechNet with a suggestion that might help with your problem.
  http://social.technet.Microsoft.com/forums/en-us/winserverprint/thread/18a5dba1-1bc5-49EB-923A-b81958e80727

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My computer is not connected to the internet for more than 2 minutes both

  my computer is not connected to the internet more than 2 minutes at a time

  Hi Ronda,

  Thanks for choosing the Microsoft Community forums.

  I see that the computer is not connected to the internet for more than 2 minutes on Windows 7.

  To help you better, please answer this question.

  Did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem.

  Method 1:

  
  Please see the knowledge base article:
  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211/

  Method 2:

  You can make sure to uncheck the following option in the network adapter properties in Device Manager.

  
  "Allow the computer to turn off this device to save power".
  You can see the steps
  a. Click Start, the Device Manager in the area start search, type and then click on Device Manager in the list programs.
  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  c. in the Device Manager dialog box, expand network adapter, click the network adapter and then click Properties.
  d. in the network adapter properties dialog box, click the power management tab. The allow the computer to turn off this device to save uncheck box appears

  Method 3: Problems of Wi - Fi network and

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• iPhone 7 will not connect to iTunes - request for the new version, but everything is up-to-date

  My new phone will not connect to iTunes on my computer windows laptop. It is said that it requires a newer version of iTunes but the latest version is all ready to date

  Is your "new version" iTunes 12.5.1.21? If this is not the case, your 'windows' laptop running Windows XP or Vista?

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• iPod Touch will not connect to iTunes

  My iPod Touch will not connect to iTunes. When I connect it to my laptop with the cable my laptop USB recognizes the iPod begins to charge and 10 Windows asks me if I want to open it to view files, but it seems to treat it as a camera and I just want to know if I want to get pictures on it and on the laptop.

  I made sure I have the latest software updates on the iPod and iTunes and thought this would fix the problem, but iTunes still does not recognize my iPod because it never appears on the Panel for me to sync things for her, etc.

  How can I get my iPod to be recognized by iTunes again? Very recently, it stopped connecting.

  If your computer does not recognize your iOS device, follow the steps proposed by Apple.

  https://support.Apple.com/en-us/HT204095