My guard macbook eject blank CD

Similar Questions

• MacBook keeps ejecting blank DVDs

  One day my MacBook was able to burn DVDs, and then the next day he couldn't.

  Now when I insert a blank DVD, a message "waiting for the writer" appears before the DVD appears again.

  MacBook will now play discs, but not write.

  Any thoughts?

  Settings and different lasers are used to burn. Have you tried the Superdrive with lens cleaner that uses a small cleaning brushes?

• L7680 ejects blank Page before and after print job

  My L7680 has recently started to eject a blank page before and after a print job; separator page option is NOT selected.  I have tried all the suggested trouble shooting points in the HELP section, but none solved the problem.

  The button Configure the printer had the option to return all the default values - that solved the problem, but it takes you to set other choices that you have made since you use the legacy.

• Exernal HDD guard after ejecting disk access

  I use a drive external HARD of Fantom Drive with USB3.

  When not in use, the supply unit keeps making even the sounds that you normally hear from a hard drive when accessing r/w. Even after unplugging the USB, the device continues to work on the disc. I waited for more than 15 minutes and it does not stop. Without USB connection, it is clear that there is no software on the PC in interaction with the device.

  Any idea?

  Hello

  It sounds like a firmware issue, or possibly a mechanical problem with the drive (motor solenoid does not receive the correct stop signal). In both cases, it's a hardware problem and not something that we have on the software side can help with. A site that could help is Tom's Hardware, which also has a Forum like this. Go here: http://www.tomshardware.com/ .

  Let me know if this helps you.

  Kind regards

  BearPup

• Why my printer ejects white sheets of paper?

  Hello

  I see many cases where printers are shot on white sheets of paper after trying to print a document.

  Now in general what it means the USB cord is bad or the ink cartridges are empty/bad.

  Step 1:

  I suggest to check the level of ink in the printer, because usually when you're out of ink, which causes the printer does not print at all or eject blank pages when you try to print anything from the Office for / laptop.

  You can check the ink levels by:

  I hope it's useful!

  Thank you!

• New TS140 - cannot get Windows Server 2012 demo of R2 to install

  Hello

  I recently bought the TS140 and attempted to install the demo of Windows Server 2012 available from Microsoft.  I completed the following steps:

  (1) engraved an image ISO for the demo on a DVD.

  (2) load on startup the thinkserver DVD format the disk, download updates and prepare the installation.

  (3) at the end, I put the DVD in the drive.

  Despite the DVD being burned successfully, the guard TS140 eject the DVD and asking for the disc.  Issues related to the:

  -Someone installed via the demo and can give advice on the process?

  -Is the DVD of the right way to go or should I go with another method as a USB?

  Sorry, I'm use to the insertion of a DVD and occurring start installation.  Try to install after the initial drive of Lenovo is causing me some confusion.

  Thanks for your help!

  First of all, thanks to all for their persistence I managed to do the work.

  Basically, if you download the ISO of the evaluation version, YOU cannot USE the native Windows ISO burner.  When I copied on a drive and had Windows burn, it just don't understand the disc.  However, when I used the Windows store software specially set up the server:

  http://wudt.codeplex.com/

  He worked very simply.  I am extreme newbie, so it was difficult.  If you have purchased a TS140 and try Windows Server, follow these steps:

  (1) copy eval on the Microsoft site.  They have like 10 files to download, but you only need one ISO.  I don't know how the other files.

  (2) use the ISO burner of the Microsoft store - its registered for use with Windows 7 but worked like a charm.

  (3) use the boot (ThinkServer Easystart) disc that comes with your server, or as a recommended download the most recent copy.

  4) go through the steps.

  (5) when you are prompted, insert the new drive of Windows Server R2 2012.

  (6) it must go through the installation.

  Once again, thank you for not giving up, and I hope that my instructions about help an absolute beginner.  Probably simple for experts from the server, but I've never used Windows Server (other than Windows Home Server which was awesome, but abandoned!)

• MacBook pro doesn't boot/guard chrasing (end 2011-17 ")

  Dear community,

  I have a problem with my laptop as expensive. All started a few months ago. Guard just by chance my business, when all of a sudden my screen blink, turning blue, split in two. Hmmm weird, never had this before. Was not any substance is heavy on the machine in time.

  For troubleshooting begins: Reboot, = > boots ok. Yes it works! After 10-15 minutes, the same question. Woohoo!

  Reboot again, this time without success. It gets stuck at the loading screen grey and begins fanning upward. After becoming as hot as Mordor, it stops. Tried a few reboots, but all with the same result.

  Occasionally, it starts successfully and I can work perfect for about 10 to 30 minutes. (After restarting 5ish, at this point I did a backup on an external).

  My first assumption is therefore a bit my HARD drive stopped working. (Had the same problem a few years ago, swap HARD drive fixed)

  So I start with basic stuff. Check if everything is always in place. Swap the RAM, see if everything is still ok.

  Restart the macbook, without success. Same screen.

  Cannot access disk utility, startup does not work either. Memory NVRAM and SMC reset does not work.

  Single user mode is the only thing that seems to work all the time. (Note: I was looking for similar problems a little on the net.)

  I came across a forum a clever solution:

  /sbin/fsck -fy


  /sbin/mount -uw /

  rm /var/db/.AppleSetupDone

  reset

  TADAA! I can create a new account. Everything seems fine! First thing we do is to check my HARD drive. No problems found. But after 30 minutes ish it crashes again

  Only the same deal in single user mode but this time without success.

  So no start working at this point.

  For some reason any (after 1000000 tries), I went into disk util. So clean it up the installation of the operating system. Installation is made but same problem starting.

  With a friend we swap HDD and my HARD drive (SSD) starts fine on his machine. His HARD drive (windows OS) starts immediately on my macbook.

  But the fun doesn't last long, after 30 minutes of use ish, the macbook crashes again and the startup problem starts again.

  At this point im guessing a hardware problem somewhere. Maybe someone has or has had the same problem or can help with this problem.

  Sorry for the long reading and occasional grammar mistakes.

  Any suggestion or help is gladly appreciated!

  PS: The only thing that had changed was that I bought a new magsafe power adapter but it loads fine.

  Greetings Fernando.

  Your MBP falls into this category:

  https://www.Apple.com/support/MacBookPro-videoissues/

  Visit an Apple store and tested it.

  Ciao.

• Tabs at the top of the page option does not appear in the menu when I control-click on a blank section of the tab strip in Firefox MacBook on 15.

  I've just updated my Firefox version 15.0 browser on my MacBook. I'm really used to having the tabs under the address bar. However, when I Ctrl-click on a blank section of the band to tabs, there no option "Tabs" at the top on the shortcut menu.

  Any suggestion on how to find this option would be appreciated.

  That changed in 15 Firefox and is now a hidden preference; the default is for tabs on top to be on. To disable the tabs on top, you use about: config. The instructions are the last item on the next page. I've also included a link on how to use about: config

  • http://www.AddictiveTips.com/Web/Firefox-15-new-features-changes/
  • http://KB.mozillazine.org/about:config

• How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  You won't lose data when you remove an iPhone, unless you're in the middle of the backup or synchronization of the device.

  If you see no activity in iTunes/Photos/etc... Then, it is safe to unplug.

  With a card reader (SD card?) you do drag the desktop icon to the trash. It turns into an arrow when you drag an icon ejector.

  Similarly, you can click Finder on the dock, then locate the reader on the left column and click on the "arrow" to the right of the device to eject it.

• I have a blank Memorex music CD - R stuck in my superdrive drive and it will not eject.  It does not seem to recognize that there is a disc inserted.  Any ideas?  Help - I'm a rookie.  :)

  I have a blank Memorex music CD - R stuck in my superdrive drive and it will not eject.  It does not seem to recognize that there is a disc inserted.  Any ideas?  Help - I'm a rookie.

  It worked - search for "Terminal" and then type "drutil eject external" thanks for the help.

  DiabloDog

• I have Mozilla Ffox on a Dell Vostro Desktop computer, connected to a HP-Officejet 6500. The printer prints internal drive, but don't print Web sites. The printer ejects only a single sheet of blank paper.

  The version of Firefox 4.0.1 and Windows 7 operating system are
  correctly identified below.
  Still, my printer prints not websites, including Yahoo mail. The printer seems to respond to Web sites, but only ejects a single sheet of blank paper when printing is initialized.

  Just to be sure, everything is covered:

  1. Reset you all the preferences of print.printer , as indicated in brackets in step 2, who were in "BOLD", not only print.print_printer preference?
  2. You you exit Firefox (Firefox button > exit OR file > exit, if you use the Menu bar), and then wait a few seconds and restart Firefox before testing the change according to step 4?
  3. I have a HP 6200 series. Don't forget, if yours is a multifunction printer that you have NOT enabled the fax (i.e., "HP Officejet 6200 series" NOT 'HP Officejet 6200 series fax') in the name field of the printer on the screenshot (CTRL + P).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Ejection of guard

  I have a HP h1280t, 16 GB mem, 1 TB hdd, running Win 7.

  My drive to cd/dvd guard ejecting CDs/DVDs I try to load. This just started happening.

  All software/drivers are up to date.

  Any ideas why this happens?

  KHone001, welcome to the forum.

  I suggest you go into control panel / Device Manager / device DVD ROM (?).  Right-click on your drive and select "Uninstall" and then restart.  Windows will find the drive and install it automatically.  This may solve your problem.  If this is not the case, check to make sure that there is nothing in the drive that causes the action.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• printer all-in-one dell V515w ejects a blank page in the front of the print job.

  printer all in one dell V515w ejects a blank page in the front of the print job.

  printer all in one dell V515w ejects a blank page in the front of the print job.

  Hi Richard

  You should ask this question on the Dell printer support forums.

  Dell printers - Hardware and Software Support:

  http://en.community.Dell.com/support-forums/peripherals/f/3528.aspx

  Concerning

• I'm unable to download apps from creative cloud to my MacBook Pro.  I downloaded the package install twice.  I can double click on the installer and it seems to be downloading, but it just guard spinning for 10-15 minutes, then gives me an error and a pro

  ??? I'm unable to download apps from creative cloud to my MacBook Pro.  I downloaded the package install twice.  I can double click on the installer and it seems to be loading but it just guard spinning for 10-15 minutes, then gives me an error and a blue button to get help.  We have other MacBook Pro in the studio and just downloaded quickly.  Any ideas?

  Hello

  Run Adobe Cleaner tool - https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  Download creative cloud of Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  If this does not help then follow the steps mentioned below.

  1. Access \User\\Library\Application Support\Adobe *

  And/Library/Application Support / Adobe *.

  To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 and later.

  1. Find and delete the files AAMUpdater and OOBE
  2. / Library/Application Support/Adobe (rename Adobe Application Manager and Adobe of joint office)
  3. Go > utilities > (rename Adobe Application Manager and creative cloud)
  4. Download Creative cloud-apps Download Adobe Creative Cloud | Adobe Creative Cloud free trial

  Let us know if this will help.

• Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Cannot install LR 6 DVD on Macbook Air with OS 10.11.2.  Installation crashes and ejects the DVD at the end of 98%.  Long note that 'Adobe application manager quit unexpectely', restart.  DVD installed correctly on my IMAC.  That is what it is?

  Copy the contents of the drive in a desktop folder and install from this directory.