Exernal HDD guard after ejecting disk access

Similar Questions

• SP3 XP hangs when disk access

  XP crashes after a few seconds during disk access, even when running in Mode safe or started at the command prompt, but faster in normal mode

  I guess you are talking about hard disk access and not a CD/DVD disc access. If I'm not mistaken, your hard drive is probably faulty and you should test it.

  Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• Filed to load the disk access driver

  Partition Wizard displays "Classified to load the disk access driver" after his laptop with ThinApp.

  Could you please tell me how to fix this error.

  I bet that the application has a device driver, used for access to / manipulate the disc. ThinApp can virtualize device drivers. Generally, disk tools are poor candidates for ThinApp. You don't want a virtualization layer between your disk tool and the disk.

• CD player is ejecting disks without reading or play

  My e drive is not read or play music CDs or DVDs.  It is ejecting disks automatically.  I already ran a Mr. Fix It but empty is come.  Mr. Fix It then recommended I go through Windows, but wanted me to pay even if I am still under warranty (I need to fax my documentation of warranty-can not do right now).

  Looks like a problem of equipment, is that the reader is able to read data/audio CD or DVD? If this isn't the case, then you may need to replace the drive. If only a few CDs or DVDs are affected, check if they are always clean and not scratched. Tim Baets
  http://www.BM-productions.TK

• Disk defragmentation will not leave after a disk cleanup, then a Defrag.

  Original title: Defrag quit smoking

  After a disk cleanup, then a defrag, my laptop Vista SP1 quit the application.  I let it run for several hours. I'm NOT cnnected to the internet I use this computer for music production. SP2 will solve this dilemma?

  Hi Drumminman,

  1. what happens when you try to close the defarg?

  2. you receive messages or error codes?

  3 have you tried to use the computer during execution of the defragmentation?

  Usually if the disk is very fragmented evil, it can take a long time to perform the defragmentation.

  You can try these steps and see if it helps.

  Step 1:

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Step 2:

  You can also scan [SFC] System File Checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 3:

  You can also try to install Windows Vista SP2 to solve the problem and to improve the performance of the system.

  For more information, you can consult the following article:

  Learn how to install Windows Vista Service Pack 2 (SP2)

  Hope this information is useful.

• Im trying to install adobe creative suite 2 premium without cd and after running Disk 1 it ask disc 2 but I have just electronics cd physical disks

  Im trying to install adobe creative suite 2 premium without cd and after running Disk 1 it ask disc 2 but I have just electronics cd physical disks

  Unless you install the special download version provided by Adobe, everything that you install in the way of CS2 you will get very far.  See below for an explanation and then follow download instructions.

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• External HDD PX1277E - 1 08: cannot access files after HDD felt down

  Hi all
  my beautiful felt down external HARD drive. The first part of the disk has been partitioned as free and contains the software that is used to unlock the secure parttition.
  After the success on the field, there are error messages if plugged into usb. Some dll´s are not readable etc, seems that some parts are not readable.

  How can I access the large and assured the part of my hard drive, y at - it software? I know that my pw, but the software does not point to pose for him.
  Thank you very much...
  Eric

  Very bad looks like Buddy :(
  If the HARD drive cannot be recognized then disk failure HARD and eventually, he died.

  Of course, there are a lot of special companies that could save the data of the failed HARD disk, but even I know this is not easy and costs a small fortune

• CD/DVD drive is ejected disks after about 4 minutes. Often don't recognize the presence of the disk.

  Unit acted almost since. Don't recognize some discs, acknowledges some, even new program disks. When I can get it to play a DVD, it will appear yits in 4-5 minutes.

  Hello billyrhelms:

  Welcome to HP forum. Well, I see you found piou HP CD/DVD drive. This is a normal behavior how wonderful. CD and DVD have codes unfortunately HP Touchsmart will not open disks. You must use the Mexwell of HP brand discs or diskettes. Now for movies you have to pay for this updatehttp://www.cyberlink.com/prog/update/v2/update.jsp?fileTypeId=1&PRODUCTNAME=TouchSmart&PRODUCTVERSION=3.2_MediaSmart_4.0_DVD&VERSIONTYPE=BD+OEM+2ch&CHANNEL=OEM&LANGUAGE=ENU&OSREGION=0xf4&SYSTEMLOCALE=0x0409&BU=CLT&MAJORVER=3&MINORVER=2_MediaSmart_4&BUILDNO=4.0.4215&VENDORNAME=625&SR=HTS091023-02&DEVICE=DVD_Pre&PATTERNID=186873&BB_ID=58908&HWID=None&Model=None&APREGID=9649aabba4fa4bc2508c841e4b64e17a&UUID=None&affiliate=625_732_572_HTS091023-02_58908_186873_1-1_None_9649aabba4fa4bc2508c841e4b64e17a_None_0&utm_campaign=BB_&utm_source=BB_TouchSmart_625_&utm_medium=BB_TouchSmart_58908_Patch_Enhance_HTS091023-02_186873__ Not cheap very expesive $84.00 . If yoi is problems with the software disk. Insert the disc and then close this useless tiny window witch I find this very annoying.  Left click on (Edrive select properties and choose witch Windows to open the disc in.) The computer ejects disc not compatible and softawre

  It is one of the reasons why people are turning to Apple computers or other computers of the brand.  Please read forum. This is not the first time that this issue has been published. Please click on Bravo, if I answered your question. Thank you frrw.

• Access denied message to scan and a program after running disk check

  Original title: chkdisk found bad sectors on my hard drive and seemed to move them, but now I have deinied for my scanner and a program so far. How can I fix it

  I cnt day Quicken or use my scanner. I get "access denied".

  Hi rosiemate,

  To check if the following is useful.

  Method 1:

  Step 1: Disable Zone Alarm temporarily and see if you still have access denied message. If there is no error, you may need to look in the settings of the program.

  Note:  Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Step 2: As you can see the files unusable for Quicken, you can follow this article to check the issue.

  Alternatively, you can consult this article.

  It may also be a possibility of a corrupted user account.

  Method 2:

  Step 1: Create a new user profile to test the issue. See the "create a new user profile on the computer working group" section of this article.

  Step 2: If the problem does not occur, follow the "copy files to the new user profile" in this article.

  I hope this helps.

• Windows XP disks "access denied" after a clean install of windows 7

  I'm building a new PC because the hardware failure of my original PC running Windows XP.    I have installed Windows 7 on the new machine and attach the old records of Windows XP.    These discs were shown in the form of "Libraries", but their contents could not be read, and I got the message "access denied."

  In my Windows XP of origin, these discs are fixed either accessible only by the administrator account and not the guest account.

  What is the cause of the error?

  My Windows 7 How to read the contents of these disks?

  Thank you.

  You will need to take ownership of the contents of this drive.

  See:

  http://www.intowindows.com/how-to-take-ownership-of-a-folderfile-in-Windows-7/

• disk access error internal and SD T5 after bad disconnection from PC

  Hello

  yesterday I accidentally disconnect the cable my T5 when it was connected to my PC via drive Mode. Now I can't access the internal card and the SD to my PDA. Drive Mode circuit without problem. The application of "Files" poster only empty 'internal disc' and 'Card' without a proper label. I see the map, internal disc labels and its ability to 'Info card. Resco Explorer sees only ROM and RAM and may not display the content of BuiltIn, disk internal or SD card. When I try to open the card or int. drive Resco Explorer says: "memory: invalid parameter." (0 x 0103): SD2GB (H:/) "

  I tried to do a soft reset a reset hot, but without success. It does not help when I probably have to 'remove' the drives in windows. It's always the same.

  Please help, if you know what to do. Thank you.

  If you are done doing reset soft and warm. then the last option is to restore the device to its factory settings.

  Please perform hard reset and see if that can help solve the problem.

  Message is about: Treo 680 (unlocked GSM)

• Tecra R840-109 - alert HDD - unable to get disk information

  I turned on my Toshiba Tecra R840-109 and everything looks that the factory settings have been restored, but I still have my files on the hard disk in the users folder (where the system has also built a temporary user I'm connected now, I guess).

  At the opening, the computer asked me to do the things you do when you get a new computer (for example accept the license, install browsers, register fingerprints, if applicable etc.). In addition, it showed an error, alert HDD/SDD saying "Could not get the information from the disk, cannot use the alert function".

  Is there a way to solve this problem, that is, to apply the previous (original) user?

  An obvious solution would probably be to restore the system, but I don't have a backup set to the top (which I will fix as soon as this problem will be solved). Tried to reboot, nothing has changed.

  Information on the mobile phone: http://www.toshiba.co.il/en/disconti...ecra-r840-109/

  Any help is appreciated!

  Hello

  To be honest situation described sounds pretty confusing and not logical for me.
  If you do not have recovery (DVD or USB) media create using preinstalled Toshiba recovery media creator tool.
  After this use this bootable media and reinstalling the recovery image so you will have 'presets' again. After the installation of clean operating system, it is not possible to have the old data stored on the HARD drive, not on the C partition.
  The fact is that before the installation of recovery begins any HARD drive will be deleted and formatted.

  Sorry if I got you. If you have any concrete and clear questions do not hesitate to ask.

• Replace the HDD with SSD boot disk and use the disk HARD now as secondary storage

  I would like to replace my dv7 - 6143cl HDD with a SSD boot drive and using the OEM HARD drive as secondary storage.

  I have the SSD and the caddy

  I need to:

  delete the original OEM HD

  Install the SSD

  install OEM HARD drive in secondary Bay

  Install Win 7 (I don't have install disks - what is on the HARD drive in his backup partition)

  or I have to

  delete this HD

  Install the SSD

  go into the BIOS, and then assign him drive in AHCI (etc.)

  Install Win 7

  install OEM HARD drive in secondary Bay

  etc.

  I want to dual-boot, if possible, but I think that the second HD (start-up disk) does not start, even if I change the settings in the BIOS

  is this true?

  Pavilion dv7 - 6143cl

  I7

  8Gb

  Win7 (64)

  Thank you very much

  Hello:

  Your BIOS is set to AHCI (or RAID) by default. It cannot be changed.  Look in your device manager and in the IDE ATA/ATAPI controllers section, look to see if there is a controller SATA ACHI he.

  If so, you have an AHCI BIOS default.

  If you go further down the line in Device Manager and see a section of storage controllers, click on that, you would see a SATA RAID controller and your BIOS is set to default RAID.

  I don't have your model laptop so I don't know if HP has implemented some models double disk RAID or AHCI.

  So... First, copy your original C:\ drive SWSetup folder and save that to a portable hard drive. That must contain all the files installation for the drivers and the software provided with your PC. You can search this folder for programs that you may want to reinstall after your new SSD drive HARD primary.

  To install W7 on your SSD, check your own install of W7 disc.  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Can't answer your question on the dual boot as I never did before.

  Paul

• HP Compaq Presario 2100: Hard disk access

  Hey people.

  So my HP Compaq Presario 2100 is completely and totally dead and cannot be revived. However, there are somethings on my hard drive that I would like to get. Does anyone have any ideas on how I can do? Y at - it somewhere hard that I can take which can access the hard drive? Thank you very much!

  -Deepaur21

  Message edited by Deepaur21 on 05/16/2009 14:20

  You must remove the hard drive and get a hard drive of the computer laptop usb adapter and plug it into another computer to copy and paste the files that you want on the other computer.

  Here is the Manual:

  Your manual

  Remove the hard drive appears on pages 2-9 to 2-10

  This is the kind of card you need:

  laptop hard drive box

  With an external box that you can use the drive as a portable storage drive after you delete the files you want or keep stored on the old disk of the laptop.

  Good luck

• Extremely slow performance after recovery disk restore.

  Machine: Dell portable computer. Router: Netgear. Cable modem: Ubee. OS: Windows 7 Professional Pro. Usage: homepage.  Background: download software WiFi of Mrs Webb Page. When I tried to reboot the system has been compromised and would only boot from the recovery disc after a complete restoration of the self made restore disc. Made several attempts to recover from internal disk using restore without success points.  These recovery discs were made in two years when the system was purchased and loaded. Problem: System is now extremely slow requiring min to access internet and min more than to get to yahoo mail and min more to call individual emails. Browse online or offline is painful causing a lot of pain. Assume total ignorance when you answer the question that follows: HELP?

  If the system is really slow on its own without worrying about all things Internet that I'd work on that to know first since you said "Browse online or offline is painful."

  Dell made a lot of laptops to do so that we can see what you have:

  Click on the button/ORB start in the lower left corner of your screen. Or, press the button of your keyboard Windows logo.

  In the type box:

  Msinfo32

  Select / click msinfo32.exe and the system information dialog box opens.

  Click System summary, click on edit, select all (Ctrl-A), copy (Ctrl-C) and then paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) feedback here.

  For the Canadian Techtdo this:

  Expand components, storage, click on disks, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  Sooner or later, it would be nice to have a list of your startup items so while you wait to do this:

  Download and install the free version of CCleaner here:

  http://www.Piriform.com/CCleaner

  CCleaner will want to install an additional startup item in your configuration (that you need not) on the first Setup screen remember to choose to customize the installation and make it look like this, then install CCLeaner:

  

  CCleaner allows you to manage most of the startup items and also do some other operations oriented cleaning.  Some people will you recommend is not to use the registry functions in CCleaner to avoid these features for now.  I have no problem with it for me, but sometimes it's a contentious issue, I prefer to avoid as much as possible!

  You can uninstall CCleaner later if you don't like it.

  Run CCleaner and choose Tools, boot and bottom right, click on the button "Save to text file" to save the startup information in a text file on your desktop with a name you remember - something like startup.txt

  Save the text file startup information to your desktop (or somewhere you can find it) open the text file with an editor (Notepad or WordPad) and select all (Ctrl-A), copy text, all the text selected in the Windows Clipboard (Ctrl + C) then paste (Ctrl + V) the contents of the startup list of back here in your next reply.