my hard drive internal of my external hard drive

Similar Questions

• Brewing between internal memory and external memory SD card

  The Sansa Clip + shuffle between songs on the internal memory and the external memory SD card; or are they seen as different to play songs stored on the internal and external SD card? I have 4 GB Clip + with a 8 GB external SD card. What total 12 GB? Or should I spend inside out manually to hear the songs loaded on the external SD card?

  dohar9 wrote:

  The Sansa Clip + shuffle between songs on the internal memory and external memory SD card?

  Yes.

  I have 4 GB Clip + with a 8 GB external SD card. What total 12 GB?

  In theory, Yes. In actual practice, but it will be probably closer to 10.75 to 11FR.

  Or should I spend inside out manually to hear the songs loaded on the external SD card?

  N ° the player will play seamlessly two memory slots when you use the random mode.

• adjustment rule - how to allow internal pc ping external ip address?

  I eventuall put in place the PIX501 and everything seems fine except the internal pc cannot ping the DNS server and the external ip address. Still exceeded demand. I allow all outbound icmp traffic and especially udp traffic. I have also allow a part of tcp traffic and reject all others. We have access to the internet but just when ping external IP and DNS, for example, when I ping www.google.com, it can resolve ip from google, but procrastination requst.

  What are the rules that I set up to allow internal pc ping external ips?

  See you soon

  ICMP incoming via the PIX is denied and outgoing ICMP is allowed, but the incoming response is denied by default allowed both it as below:

  access-list 200 permit icmp any any echo or echo-reply

  Access-group 200 in external interface

  Kind regards

  Mehrdad Arshad Rad

• Normal (internal) link to external site opens in Safari on iOS after upgrade to cli - 6.0.0

  I just tested this again with a recompilation; It still does not work...

  My app has a normal link, (a href), to an external site, which should open in the application itself. This works very well in Android. But in the iOS, it opens externally in Safari when it is compiled with cli - 6.0.0. Compiled with cli - 5.2.0 that it opens in the app, no problem. I have the plugin added whitelist and origin allow browsing, attempts to authorize and access are all set to *.

  So I think it's a bug.

  See also: -in-safari-on-ios-after-upgrade-to-cli-6-0-0 http://community.phonegap.com/nitobi/topics/normal-internal-link-to-external-website-opens

  Found!

  After being pointed in the right direction on Jira... it was the attempts to authorize that causes this behavior.

  Using

  or leave this entire string out of the config, causes an iOS open safari.

  However, by using the following in the config works correctly:

  And I thought using the * would be the easy way to configure this :-)

  Hope this helps someone else with the same problem.

• Display both internal users and external v5.0

  Hello

  I have an evironment of configuration using view 5 for internal users using PCOIP (about 500).  I want to enable some of these users access to a virtual computer from outside the workplace.  Currently I only use 1 connection to the server.  I can use this connection to the server to enable PCOIP internal and external / RDP connections or I need to connect 2 servers, one for internal and an external?  I'm just trying to understand how it fits into the picture, I intend on using a security server.  If explained elsewhere then please point me to it, but I tried to search.

  Thank you.

  Depends on how they access, most of the cases you need an another view connection to the server that is configured for PCoIP tunneling and external URL is what your users will connect from the outside.

  Its really easy to install, install another (choose the replica), highlight the original, then you configure the settings above and you're done.

  Linjo

• my HP m9040n pc not recognize Ports for: HP - BK228AA 1 TB personal media drive, with internal plugin or external hook upwards. USB port locations are labeled as 'unknown '.

  I have two of these drives, and they seem to have stopped when I upgraded to Win 7/64 Ultimate.  The driver is on the hard disk according to some.  I get the review saying "Windows has closed the port USB (unknown) #43, which usually means driver issues.  If the driver is out of date how to download an update?

  Hello

  1. which edition of Windows 7 you are using?
   
  Example: Windows 7 Professional 64-bit
  
  2. what was the recent change in hardware or software performed on the computer before the question?
   
  Method 1
   
  Step 1
   
  My drive does not appear in Windows Explorer

   

  http://support.Microsoft.com/kb/330140

   

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Note: The steps apply to the issues of Port and driver for Windows 7.
   
  Step 2
   
  Update Chipset drivers on the manufacturers website.
   
  HP Pavilion Elite m9040n desktop PC
   
  http://h10025.www1.HP.com/ewfrf/WC/Product?CC=US&DLC=en&LC=en&os=4063&Product=3550550&Rule=32136&sw_lang= &
   
  I hope this helps.

• WMP to will not Sync & gives Error Message (8 GB internal/32 GB external)

  I have a 8 GB Sansa Fuze w/mic SDCH 32 GB card inserted (bought after reading, it could be used).

  The amount of the card and the size is displayed correctly in WMP, Explorer and elsewhere.

  The player shows that I have 1 G available on the internal memory and 13 GB on the 32 GB card.

  When I tried to sync the new music I get the following message...

  "WMP cannot access the file.  The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  It is not a WMP question - I tried to synchronize with another Rocket Player and WMP works very well.  I have also tried to sync the music on this rocket on another computer at home and get the same message.

  Any ideas why these programs show 14 GB of available, but the "rocket" will not allow synchronization or copying.

  I also, that the drive to Autodetect and have used this rocket for several years now.

  There are 5200 songs on this player.  I'm starting to wonder if this Sansa Fuze cannot really work with a 32 GB card.  At the same time, I format the card with Windows 7.

  Any ideas?

  Thank you...

  If you do not have the latest firmware, do the update. Might as well. You don't have to bother with the installation of the update, because there will be more updates. Just use the manual method.

  Sometimes, for some mysterious reason, formatting of the "rocket" help the external card work better. Don't ask me why - could be stray bits of information floating around several synchronizations.

  But as long as you have copies of the content, it is worth a try. Out the 32GB card before formatting.

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Spry does not not after moving internal styles in external style sheet?

  I'm sure it's easy for somebody smart out there, but this is the first time that I did and I am puzzled. Looks like the spry menu is not find its styles!

  http://www.duenorthdesign.com/PCM/page_externalstyles.html

  http://www.duenorthdesign.com/PCM/mainExt.CSS

  Thank you!

  duenorth09 wrote:

  Osgood thanks... I TRIED, but somehow, my html page looks good in Dreamweaver, but will not preview in dreamweaver or on the server. Can you check my account again? It then, I continue to lose days here and my deadline is approaching. It seems that the spry code is in there. I'm trying so hard to create this external stylesheet to work! don't want to leave all the code on each page, because I know that's NOT the right way to do things. I really appreciate your help!

  http://www.duenorthdesign.com/PCM/page_externalstyles.html

  You now have the css files and js spry, related to the page, but somehow, you've won a leading slash / infront of the link to the mainExt.css stylesheet

  Remove the leader / front of mainExt.css

• View two different windows simultaneously with an internal and an external monitor

  Display two different windows on external and internal monitors at the same time?

  Yes, you can.

  When you connect an external monitor, its pixels are added to the screen integrated to create an extended desktop. If you get a double built-in, just disable fill video. The pane organize you allows to place each tiny in the same way screen icons, they are arranged on your bench, and then the mouse moves correctly on the boundary between displays, and you can drag and drop Windows where you want.

  

  .

• Is it possible to increase the internal storage or external on an iPhone?

  Can yo add internal or external memory to an iPhone?

  Is not possible.

  If you need to free up storage space, help here > http://www.huffingtonpost.com/2015/01/08/iphone-free-space-tips_n_6269756.html

• LRT224 redirection port internal port different external

  Port forwarding seems to work flawlessly - but I need to route allows you to say external port 940 to internal port 1005.

  On most routers, you choose this in the "service" module or the module "port forward" - but I can't seem to find anything to indicate that the IP address is internal.

  How to do this?

  / Ulrik

  Click management services under Configuration > Configuration > Port Address Translation.

• Clientless VPN works internally but NOT externally. Help please!

  I have set up my VPN Clientsless on one ASA 5510 firewall and to access internal (using the IP address of the firewall internall) it displays very well.

  But when I entered the external IP address of home, for example https://232.14.14.14/ , it gives you the choice of procceed or not and wjen I choose it is a secure page to procceed then I get the following message:

  Under Construction

  The site you are trying to view not currently has a default page. It can be being updated and configured.

  Please try this site again later. If the problem persists, try contacting the Web site administrator.

  If you are the administrator of the Web site and that you have received this message in error, please see "Enabling and Disabling Dynamic Content" in IIS Help.

  To access IIS help

  1. Click Startand then click run.
  2. In the Open text box, type inetmgr. IIS services manager appears.
  3. On the help menu, click Help topics.
  4. Click Internet Information Services.

  Any ideas please?

  Great, thank you!

  Now, you have two options:

  1 remove the static translation or change to another port:

  not static (inside, outside) tcp https Firewall5510_Server netmask 255.255.255.255 https interface

  2 change the WebVPN port to something else:

  WebVPN
  

  no activation outside

  port 8443

  allow outside

  So when you sign in, you go to: https://1.1.1.1:8443

  HTH.

  Portu.

• Internal network and external network.

  Hello

  I want to use hyper-V to VMware workstation. I have a problem with that. I have 2 virtual machines, a server and a workstation. The server must be a router to an external network (internet) for the workstation.

  The server will be DNS, DHCP service and transfer to the workstation.

  In Hyper-V, it is easy, the server gets two NICS, one (internet) outside another internal. The workstation only an internal NIC work stations now takes an IP address from the dhcp on the server.

  When I try this with VMware, the workstation does not take into account server and get an address IP of VMware. Is it possible to change this, can VMware act here, as does Hyper-v?

  I thank the of for aid, Pit

  For the internal network, you can use the host only on VMware Workstation's network, and for do not receive not IP address of the DHCP server on VMware Workstation, you can disable the DHCP for the host only to a network using the virtual network Editor, see: VMware KB: using the VMware Workstation virtual network editor

• With both internal customers and external view of the Horizon, I do * have * to have at least a connection to the server by type of connection?

  If I want both external and non - VPN and LAN users internal to access desktops from view, I need to have a connection to the server dedicated to external users and another for internal? Right now I have one pair of Security Server-connection to the server and external connections work fine, but the internal connections are not. I have to get up at least a connection replication server and change the URL HTTPS Secure Tunnel for internal users only?

  Apparently, you don't need a connection to the server dedicated to internal users if you also external users and a security server. I found this during my troubleshooting. The URL of security server will be configured as administrator mode that external URL can be resolved and accessible while the URL to connect to the server will be configured with a URL can be resolved internally and is accessible in administrator mode.